Cisco Ise Central Web authentication not working
Hello Guys,
CWA is not working. It says that authentication suceeded but posture status is pending. No error in my Monitor--authentication. Checking it in my Windows 7, it does not shows the CWA portal.
What might be the possible problem of this.?
thanks
Kindly review the below links:
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080ba6514.shtml
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml
Similar Messages
-
Redirect to web authentication not working on Cisco 5508 Wireless Controller
Hi,
I have a wlan with web authentication:
http://i55.tinypic.com/w145zk.png
and
http://i51.tinypic.com/344sfm0.png
When I connect to the SSID (I get correct IP from the Cisco 5508 Controller) and try to surf, I do not get redirected to the web authentication page (https://1.1.1.1/login.html), when I manually insert the URL I get "cannot display the webpage". Any idea?
The virtual interface is 1.1.1.1.
Here is a screenshot of interface and internal dhcp:
http://i52.tinypic.com/2vkm1d2.png
Any idea why clients are not redirecting?
Thanks!Thanks for the reply dmantil!
When I changed the Virtual DNS name to 1.1.1.1 (the same as the IP) I get redirected if I use http://198.133.219.25, but not with http://cisco.com, I get redirected only if I use IP.
I forgot to mention that the controller is in a lab with no access to DNS server. Does the controller check if the domain is valid before redirecting users? I cant find any documentation on how the controller redirect users. -
Cisco ISE guest portal redirect not working after successful authentiation and URL redirect.
Hi to all,
I am having difficulties with an ISE deployment which I am scratching my head over and can't fathom out why this isn't working.
I have an ISE 3315 doing a captive webportal for my guest users who are on an SSID. The users are successfully redirected by the WLC to the following URL:https://x.x.x.x:8443/guestportal/Login.action?portalname=XXX_Guest_Portal
Now when the user passes through the user authentication splash screen they get redirected to https://x.x.x.x:8443/guestportal/guest/redir.html and recieve the following error:
Error: Resource not found.
Resource: /guestportal/
Does anyone have any ideas why the portal is doing this?
Thanks
PaulHello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again. -
Cisco ISE Local Web Authentication via Switch
Hello,
I have Cisco ISE 1.2 and I need local webauthentication for clients.
I want to send webauthentication link via switch.
I made a research for it but I meet ACS documents :
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Security/TrustSec_1-99/WebAuth/WebAuth_Dep_Guide.html#wp393321
and ISE central webauthentication documents for it.
Is there local webauth in ISE via switch?
Thanks,
AlparslanHello Alparslan,
Please check the following link,
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/113362-config-web-auth-ise-00.html -
IOS 8.x Apple users and CISCO ISE native supplicant provisioning not working
Hi there guys ,
I was wondering if anybody else have the following problem:
Apple iOS 8.x users are not able to register their devices on the ISE portal (native supplicant provisioning).
After they receive the redirection from the WLC, they freeze. Apple 7.x users have no problem.
ISE is version 1.2.1.198 patch 2. WLC is running 8.0.102.14.
Anybody experienced the same?
MBI am also running ISE 1.2.1.198 patch 2 with 8.0.100. I am testing with an iPad running IOS 8.1. The device will register in the registration portal, but is not being classified as an IOS device within client provisioning, I believe. It is getting profiled as a workstation even though all apple device profiles are enabled. I have an authorization policy for registered devices, and ipad, iphone, ios devices to gain access to the network without going through posture assessment. I then have my posture assessment authorization rules with apple IOS devices set for a ssid native supplicant profile. I keep getting an error page on the iPad when connecting to the ISE SSID saying "Client Provisioning Portal ISE is not able to apply an access policy to your log-in session at this time. Please close this browser, wait approximately one minute, and try to connect again". It gives this message over and over. If I turn off the posture checking authorization profiles, the IOS device is selected as a rule further down which tells me that ISE does not recognize it as an IOS device in the profiling or client provisioning.
-
Not Working-central web-authentication with a switch and Identity Service Engine
on the followup the document "Configuration example : central web-authentication with a switch and Identity Service Engine" by Nicolas Darchis, since the redirection on the switch is not working, i'm asking for your help...
I'm using ISE Version : 1.0.4.573 and WS-C2960-24PC-L w/software 12.2(55)SE1 and image C2960-LANBASEK9-M for the access.
The interface configuration looks like this:
interface FastEthernet0/24
switchport access vlan 6
switchport mode access
switchport voice vlan 20
ip access-group webauth in
authentication event fail action next-method
authentication event server dead action authorize
authentication event server alive action reinitialize
authentication order mab
authentication priority mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
spanning-tree portfast
end
The ACL's
Extended IP access list webauth
10 permit ip any any
Extended IP access list redirect
10 deny ip any host 172.22.2.38
20 permit tcp any any eq www
30 permit tcp any any eq 443
The ISE side configuration I follow it step by step...
When I conect the XP client, e see the following Autenthication session...
swlx0x0x#show authentication sessions interface fastEthernet 0/24
Interface: FastEthernet0/24
MAC Address: 0015.c549.5c99
IP Address: 172.22.3.184
User-Name: 00-15-C5-49-5C-99
Status: Authz Success
Domain: DATA
Oper host mode: single-host
Oper control dir: both
Authorized By: Authentication Server
Vlan Group: N/A
URL Redirect ACL: redirect
URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
Session timeout: N/A
Idle timeout: N/A
Common Session ID: AC16011F000000490AC1A9E2
Acct Session ID: 0x00000077
Handle: 0xB7000049
Runnable methods list:
Method State
mab Authc Success
But there is no redirection, and I get the the following message on switch console:
756005: Mar 28 11:40:30: epm-redirect:IP=172.22.3.184: No redirection policy for this host
756006: Mar 28 11:40:30: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_qualify ...
I have to mention I'm using an http proxy on port 8080...
Any Ideas on what is going wrong?
Regards
NunoOK, so I upgraded the IOS to version
SW Version: 12.2(55)SE5, SW Image: C2960-LANBASEK9-M
I tweak with ACL's to the following:
Extended IP access list redirect
10 permit ip any any (13 matches)
and created a DACL that is downloaded along with the authentication
Extended IP access list xACSACLx-IP-redirect-4f743d58 (per-user)
10 permit ip any any
I can see the epm session
swlx0x0x#show epm session ip 172.22.3.74
Admission feature: DOT1X
ACS ACL: xACSACLx-IP-redirect-4f743d58
URL Redirect ACL: redirect
URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
And authentication
swlx0x0x#show authentication sessions interface fastEthernet 0/24
Interface: FastEthernet0/24
MAC Address: 0015.c549.5c99
IP Address: 172.22.3.74
User-Name: 00-15-C5-49-5C-99
Status: Authz Success
Domain: DATA
Oper host mode: multi-auth
Oper control dir: both
Authorized By: Authentication Server
Vlan Group: N/A
ACS ACL: xACSACLx-IP-redirect-4f743d58
URL Redirect ACL: redirect
URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
Session timeout: N/A
Idle timeout: N/A
Common Session ID: AC16011F000000160042BD98
Acct Session ID: 0x0000001B
Handle: 0x90000016
Runnable methods list:
Method State
mab Authc Success
on the logging, I get the following messages...
017857: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_qualify ...
017858: Mar 29 11:27:04: epm-redirect:epm_redirect_cache_gen_hash: IP=172.22.3.74 Hash=271
017859: Mar 29 11:27:04: epm-redirect:IP=172.22.3.74: CacheEntryGet Success
017860: Mar 29 11:27:04: epm-redirect:IP=172.22.3.74: Ingress packet on [idb= FastEthernet0/24] matched with [acl=redirect]
017861: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: Enqueue the packet with if_input=FastEthernet0/24
017862: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_process ...
017863: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: Not an HTTP(s) packet
What I'm I missing? -
We have Cisco Wireless with ISE (Identity Service Engine) to provide guest access with CWA (central web authentication). The idea is to provide guest access with open authentication, so anyone can connect. Then when the guest trying to browse the internet it will be redirected to guest protal for authentication. So only corporate guest with valid password can pass the portal authentication. This is been working fine for windows machine, android, and apple devices with earlier OS version (working on OSX 10.8.5). For clients that's been upgraded to OSX 10.10.1 or IOS 8 they can no longer load the CWA redirection page.
Please let us know if there's any setting under the OSX to solve the issue, or plan from apple to fix the issue on the next OSX/IOS release ?
thanks - ciscosxRobert,
Manual assignment has been made available in ISE 1.2 release.
M. -
I have downloaded the new Cisco ISE, I've managed to configure 802.1x and MAB succesfully but I want to configure wired centralized web authentication, but I cannot find any documentation how to configure ISE and Cisco Catalyst (IOS) switches to use this feature (I only find (limited) documentation about local web auth on the switch).
I want to achieve the following authentication order on a switchport:
802.1x
MAB
central web authentication
So if a guest user comes with his laptop, 802.1x is not configured on his laptop and he's not in the Mac Bypass DB, he should "failover" to web auth and get the ISE guest portal webpage with his web browser. There he enters a guest username and password (which is of course already in the ISE DB) and he should get web access.
I've configured the switchport with the following commands
switchport access vlan 99
switchport mode access
switchport voice vlan 50
authentication event no-response action authorize vlan 32
authentication host-mode multi-domain
authentication order dot1x mab webauth
authentication port-control auto
authentication violation protect
authentication fallback webprofile
mab
dot1x pae authenticator
dot1x timeout quiet-period 2
dot1x timeout tx-period 2
spanning-tree portfast
spanning-tree bpduguard enable
the web-profile with access-list to permit DHCP traffic between the attached device and any DHCP server in the vlan 99, and communications with ISE (also in vlan 99) at the moment "fallback webprofile" is triggered (I don't know if this should be configured with central webauth?)
SW01T#sh fallback profile webprofile
Profile Name: webprofile
Description : webauth profile
IP Admission Rule : NONE
IP Access-Group IN: 133
FYI, the access list:
Extended IP access list 133
10 permit ip any host 10.175.0.29
30 permit udp any any eq bootps
40 permit udp any eq bootpc any
In the ISE, I configured DOT1x and MAB. In the MAB profile, I configured "continue" if user is unknown, and then an authorization profile for the web authentication:
(attributes of the profile):
Access Type = ACCESS_ACCEPT
cisco-av-pair = url-redirect-acl=webauth
cisco-av-pair = url-redirect=https://ip:8443/guestportal/gateway?sessionId=SessionIdValue&portal=https://10.175.0.29:8443/guestportal/gateway?sessionId=SessionIdValue&portal=http&action=cwa&action=cwa
But it doesn't work. If I attach a device, it tries 802.1x, it tries MAB, then it fails over to "web authentication" but immediately fails with "no-response" message:
001420: Jul 1 12:09:19: %AUTHMGR-5-START: Starting 'webauth' for client (0011.2
5d7.6c6c) on Interface Fa1/0/3 AuditSessionID 0AAF003E000000582E866B69
5d7.6c6c) on Interface Fa1/0/3 AuditSessionID 0AAF003E000000582E866B69
from 'webauth' for client (0011.25d7.6c6c) on Interface Fa1/0/3 AuditSessionID 0
AAF003E000000582E866B69
001422: Jul 1 12:09:19: %AUTHMGR-7-FAILOVER: Failing over from 'webauth' for cl
ient (0011.25d7.6c6c) on Interface Fa1/0/3 AuditSessionID 0AAF003E000000582E866B
69
001423: Jul 1 12:09:19: %AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication
methods for client (0011.25d7.6c6c) on Interface Fa1/0/3 AuditSessionID 0AAF003 001420:
Is there some configuration guide or steps available in order to make this work please?
kind regardsHi Tarik,
thank you for the fast reply.
I've configuried the extra settings you told me (although I thought the ip admission configuration was only for local web authentication (where the switch acts as a http server).
But it still doesn't work. The pc is getting the ip address from the dhcp server but if I open a browser session, I do not get redirected to the ISE portal in order to log me in with a Guest account.
If I look at the authentication session of the port, it looks like the ISE has correctly sent the redirect acl and redirect url to the switchport:
Switch# show auth sessions int fa 1/0/3
Interface: FastEthernet1/0/3
MAC Address: 0011.25d7.6c6c
IP Address: 10.175.0.229
User-Name: 001125d76c6c
Status: Authz Success
Domain: DATA
Security Policy: Should Secure
Security Status: Unsecure
Oper host mode: multi-domain
Oper control dir: both
Authorized By: Authentication Server
Vlan Group: N/A
URL Redirect ACL: webauth
URL Redirect: https://ISE.onemrva.priv:8443/guestportal/gateway?session
Id=0AAF003E0000175A43004FE3&action=cwa
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0AAF003E0000175A43004FE3
Acct Session ID: 0x000018CF
Handle: 0xEF00075B
Runnable methods list:
Method State
dot1x Failed over
mab Authc Success
webauth Not run
As you can see, the "web authentication" is the result of a "succesful MAB". This is because I had to configure ISE to continue on MAB if the user was not found (I found that somewhere in documentation). Then I have configured a default authorization profile where the "web authentication" is triggered. This is where I've configured the redirect-url and so on and this is of course sent to the switch as a succesfull MAB:
authorization profile "webauthentication" with the "centralized web authentication" settings configured (see attributes output):
Access Type = ACCESS_ACCEPT
cisco-av-pair = url-redirect-acl=webauth
cisco-av-pair = url-redirect=https://ip:8443/guestportal/gateway?sessionId=SessionIdValue&action=cwa
Actually, I really have no idea if I have correctly configured ISE to handle central web authentication...
If I check the "show ip admission cache", nothing is seen in there. -
Wlc flexconnect wlan local authentication and central web authentication maximum rtt
Hi
From the below link below it mentioned that "Round-trip latency must not exceed 300 milliseconds (ms) between the AP and the controller. If the 300 milliseconds round-trip latency cannot be achieved, configure the AP to perform local authentication."
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob73dg/emob73/ch7_HREA.html#wp1094148.
Is this limitation refer to web authentication also?
Thanks
Anyone???Central Web Auth (CWA) works different on controllers/APs running in FlexConnect mode. Please check this guide and confirm that you have similar setup.
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116087-configure-cwa-wlc-ise-00.html
If so, please post screen shots with your configs (Redirect ACLs, policies in ISE and the WLC SSD settings).
Also, the version of code that you are running in ISE and your controller.
Thank you for rating helpful posts! -
Local Web Authentication Started after Central Web Authentication
Hi everyone,
We have a DMZ based anchor WLC for a guest WLAN. I have this WLAN configured for central web authentication using ISE 1.2, this works correctly and can login using the guest portal.
However, after logging when browsing to a website everything is redirected to the local web authentication page and the policy manager state for the client goes in to a WEBAUTH_REQD state. I currently don't have any layer 3 security configured for this WLAN, so from my understanding it should just be using the central authentication provided by ISE.
Thanks for your help.
MarkHi Mark,
Thanks - that looks very similar to ours, though I'm doing the 3850 via the CLI as the web UI keeps dying when I click into things.
I've realsed that I unticked the Authentication servers box instead of the Accounting as I miss-read the WLC page, however while the LWA no-longer kicks in, I'm unable to pass anything except DNS traffic. The Anchor says that the client is in "Webauth" state so it looks like it's expecting something, but ISE says it's all ok and I can see the 3850 traffic going through the process flow.
If I attach an AP to the WLC directly and have the accounting box ticked, then it all works exactly as I'd expect - this is just, well, odd....
Warmest
Kev -
Content Search Web Part not work for Office Web Apps
Hi ,
In Content Search Web Part word documents are not able to open in browser,but in document library its working.
Office Web Apps not work in Content search web part
Please help me
Regards
SachinBelow is the display template to open the document in OWA.
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>AdSpace Picture on top, 3 lines on bottom</title>
<!--[if gte mso 9]><xml>
<mso:CustomDocumentProperties>
<mso:TemplateHidden msdt:dt="string">0</mso:TemplateHidden>
<mso:ManagedPropertyMapping msdt:dt="string">'Picture URL'{Picture URL}:'PublishingImage;PictureURL;PictureThumbnailURL','Link URL'{Link URL}:'Path','Line 1'{Line
1}:'Title','Line 2'{Line 2}:'Description','Line 3'{Line 3}:'','FileExtension','SecondaryFileExtension','ContentTypeId','ServerRedirectedURL'</mso:ManagedPropertyMapping>
<mso:MasterPageDescription msdt:dt="string">This Item Display Template will show a 304x100 picture of the item on top. The title and the default item description will display to the bottom of the picture with an additional line that is available
for a custom managed property.</mso:MasterPageDescription>
<mso:ContentTypeId msdt:dt="string">0x0101002039C03B61C64EC4A04F5361F385106603</mso:ContentTypeId>
<mso:TargetControlType msdt:dt="string">;#Content Web Parts;#</mso:TargetControlType>
<mso:HtmlDesignAssociated msdt:dt="string">1</mso:HtmlDesignAssociated>
<mso:_dlc_DocId msdt:dt="string">ZRMVMDDDEAE7-1-215</mso:_dlc_DocId>
<mso:_dlc_DocIdItemGuid msdt:dt="string">583b0835-32ff-4d1c-983f-b6ff4a0ef956</mso:_dlc_DocIdItemGuid>
<mso:_dlc_DocIdUrl msdt:dt="string">http://sp2013-dev-6:7000/sites/adspace/_layouts/15/DocIdRedir.aspx?ID=ZRMVMDDDEAE7-1-215, ZRMVMDDDEAE7-1-215</mso:_dlc_DocIdUrl>
<mso:HtmlDesignConversionSucceeded msdt:dt="string">True</mso:HtmlDesignConversionSucceeded>
<mso:HtmlDesignStatusAndPreview msdt:dt="string">http://sp2013-dev-6:7000/sites/adspace/_catalogs/masterpage/Display Templates/Content Web Parts/Item_PictureOnTop.html, Conversion successful.</mso:HtmlDesignStatusAndPreview>
</mso:CustomDocumentProperties>
</xml><![endif]-->
</head>
<body>
<!--
Warning: Do not try to add HTML to this section. Only the contents of the first <div>
inside the <body> tag will be used while executing Display Template code. Any HTML that
you add to this section will NOT become part of your Display Template.
-->
<script>
$includeLanguageScript(this.url, "~sitecollection/_catalogs/masterpage/Display Templates/Language Files/{Locale}/CustomStrings.js");
</script>
<!--
Use the div below to author your Display Template. Here are some things to keep in mind:
* Surround any JavaScript logic as shown below using a "pound underscore" (#_ ... _#) token
inside a comment.
* Use the values assigned to your variables using an "underscore pound equals"
(_#= ... =#_) token.
-->
<div id="Item_PictureOnTop">
<!--#_
var useWACUrl = !$isEmptyString(ctx.CurrentItem.ServerRedirectedURL);
if(ctx.ScriptApplicationManager && ctx.ScriptApplicationManager.states){
useWACUrl = (useWACUrl && !ctx.ScriptApplicationManager.states.openDocumentsInClient);
var appAttribs = "";
if(!useWACUrl)
if (!$isEmptyString(ctx.CurrentItem.csr_OpenApp)) { appAttribs += "openApp=\"" + $htmlEncode(ctx.CurrentItem.csr_OpenApp) + "\"" };
if (!$isEmptyString(ctx.CurrentItem.csr_OpenControl)) { appAttribs += " openControl=\"" + $htmlEncode(ctx.CurrentItem.csr_OpenControl) + "\"" };
var url = ctx.CurrentItem.csr_Path;
if($isEmptyString(url)){
if(useWACUrl)
url = ctx.CurrentItem.ServerRedirectedURL;
} else {
url = ctx.CurrentItem.Path;
var encodedId = $htmlEncode(ctx.ClientControl.get_nextUniqueId() + "_pictureOnTop_");
var linkURL = $getItemValue(ctx, "Link URL");
linkURL.overrideValueRenderer($urlHtmlEncode);
var iconURL = Srch.ContentBySearch.getIconSourceFromItem(ctx.CurrentItem);
var line1 = $getItemValue(ctx, "Line 1");
var setLineHeightRenderer = function(valueInfoObj)
if(!$isNull(valueInfoObj) && !valueInfoObj.isEmpty)
if(!$isNull(valueInfoObj.defaultValueRenderer))
return valueInfoObj.defaultValueRenderer(valueInfoObj);
else
return valueInfoObj.toString();
else
return " ";
var line2 = $getItemValue(ctx, "Line 2");
line2.overrideValueRenderer(setLineHeightRenderer);
var line3 = $getItemValue(ctx, "Line 3");
line3.overrideValueRenderer(setLineHeightRenderer);
var pictureURL = $getItemValue(ctx, "Picture URL");
var pictureId = encodedId + "picture";
var pictureMarkup = Srch.ContentBySearch.getPictureMarkup(pictureURL, 304, 100, ctx.CurrentItem, "cbs-pictureOnTopImg", line1, pictureId);
var containerId = encodedId + "container";
var pictureLinkId = encodedId + "pictureLink";
var pictureContainerId = encodedId + "pictureContainer";
var dataContainerId = encodedId + "dataContainer";
var line1LinkId = encodedId + "line1Link";
var line1Id = encodedId + "line1";
var line2Id = encodedId + "line2";
var line3Id = encodedId + "line3";
_#-->
<div class="top-content-box" id="_#= containerId =#_" data-displaytemplate="ItemPictureOnTop">
<div class="top-content-img" id="_#= pictureContainerId =#_">
<a class="cbs-pictureImgLink" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_" target="_blank" id="_#= pictureLinkId =#_">
_#= pictureMarkup =#_
</a>
</div>
<h3 id="_#= line1Id =#_"><a class="cbs-pictureOnTopLine1Link" target="_blank" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_"
id="_#= line1LinkId =#_"> _#= line1 =#_ </a></h3>
<span class="content-date" title="_#= $htmlEncode(line2) =#_" id="_#= line2Id =#_"><img class="cbs-Thumbnail" src="_#= $urlHtmlEncode(iconURL) =#_"
alt="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= pictureId =#_" />_#=line2=#_</span>
</div>
</div>
</body>
</html>
Basically,ctx.CurrentItem.ServerRedirectedURL is calculated by a managed property ServerRedirectedURL which needs to be included in the display template.
Problem solved.
Nehal Bhandari,ATL, Nagarro Softwares -
Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. javaRevision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java -
Web links not working in iPhone calendar notes. Used to work. Ideas?
Web links not working in iPhone calendar notes. Used to work. Ideas?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
-
Some web sites not working in FF but they are OK in Safari.
A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
Thanks,
MJTHello michaeljt, the sites you have problem, is it with a lot of flash content ?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!
thank you -
"no serializer is registered..." error with a web service not working
I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
DanI'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan
Maybe you are looking for
-
Is it possible to play multiple media sources simultaneously via ATV2?
This may seem strange but I would like to play video through the ATV2 menu on my TV AND at the same time play a separate audio (a song or podcast) through the same ATV2 via AirPlay. Both media are iTunes/APV2 supported and work great when played sep
-
Store and load objects to XML files using DOM
Hello everybody, a quick question for all of you. I'm designing a desktop application which requires a lot of custom objects to be stored into XML files and later reloaded from them. I'm planning to use DOM, creating an interface like this: public in
-
SAP FI/CO Certification - MY SAP managerial and Financial Accounting 2003
Hi, I read somewhere in the forum that alongwith 70% pass minimum, also one should score 55% in each section. How many sections does the exam contain and how it is structured? Is there negative marking. Pl help me with available information. Thanks.
-
What does the "fn" key do on the keyboard
Need help as to what the fn key does?
-
Packager Created App Doesn't Work On iOS 3.1.3
I compiled an app from Flash CS 5.5 and tried installing through iTunes and I get an error saying a newer version of iOS was required. It seems odd that the packager doesn't support older iOS versions. Will I have to install CS 5 in order to get iOS