Cisco ISE license file

I would like to backup the license file to apply for a fresh installation on the same hardware (3355). Is that possible? I tried resetting the configuration from the CLI and the license was excluded, it was necessary to do a restore.

By re-hosting you can do:
please check the link https://supportforums.cisco.com/discussion/11728041/ise-license

Similar Messages

  • Cisco ISE licensing...

    Hi,
    seeking help to reduce our ISE licensing cost, actually we are out budget and we planning to order ISE licenses less than what we required, and looking for efficiently using the same, is there any way, i mean if we reduce "user idle timeout" is it reduce our license consumption?
    any kind help appreciated...
    thank you,

    License Count
    A Cisco ISE user consumes a license during an active session. Once the sessions has ended, ISE releases the license for reuse by another user.
    The Cisco ISE license is counted as follows:
    A Base, Plus, or Advanced license is consumed based on the feature that is used.
    An endpoint with multiple network connections can consume more than one license per MAC address. For example, a laptop connected to wired and also to wireless at the same time. Licenses for VPN connections are based on the IP address.
    Licenses are counted against concurrent, active sessions. An active session is one for which a RADIUS Accounting Start is received but RADIUS Accounting Stop has not yet been received.

  • Cisco ise licensing question

    Hi there,
    I got a ISE 3315 with an IP-Plus license on it. Now I need to install a Wireless advanced license, but I got an error when trying. I've read that the wireless license doesn't need the ip-base one but I can't remove it?
    Any ideas?
    Thanks, Norbert
    Sent from Cisco Technical Support iPhone App

    you can't edit the license file.  If you think it's wrong open a TAC case with the licensing team and they will work with you to cut the correct license.
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

  • Cisco MARS license file

    We have been redoing our whole network infrastructure over the last year and we are looking to put MARS in place. The appliance we have is version 3.4.3 and I'm looking to do a clean install to 4.3.x. The lic file however was already uploaded to the appliance. Is there a way to export this file to disk to I can upload it to the new version once the install is complete?

    Thanks Gary,
    I found after the reinstall and received a new license code from Cisco :) I now have it saved for future reference.
    On a side note, I just purchased your book and the End-to-End Security by Omar Santos. I have ave read the first 3 chapters and have really found it beneficial with a great layout.
    As I stated before, we purchased the box over a year ago (MARS-20), but I am just now getting the opportunity to implement it because of implementation of other end-point/perimeter security products (CSA, NAC appliance which I must say are a great tag team).
    I'm really encouraged MARS will be a key piece to the puzzle with regards to our end-to-end security infrastructure
    Josh

  • Cisco ISE license count

    Hello,
    I noticed a weird issue on my ISE deployment. The Active Endpoints and Active Guests Counters on the ISE home page adds to a total of 105 users but when i check my license counter. I see 234 base licenses used and 221 advanced licenses used. Please what could be the problem or what am i missing?

    base license counts and dashboard active endpoints not matching
    CSCui07434
    Description
    Symptom:
    ISE base license counts and the active endpoints displayed at ISE dashboard are not matching
    Conditions:
    ISE 1.2.0.x

  • Basic ISE Licensing question

    Hi,
    Just a question on ISE license consumption.
    If a user logs in and gets authenticated (user authentication) via ISE on a device that is already authenticated (device authentication), does it consume 2 licenses, one for the device and one for the user?
    This is nowhere clearly told in any cisco documentation.
    Can anybody help me clarify this?
    Thank you,
    Mohan

    The base package includes all of the base services required to enable 802.1X, Guest, and Monitoring and Troubleshooting. The advanced package includes Posture, Profiler, and Security Group Access services.
    Cisco ISE is bundled with a licensing mechanism that has the following important features:
    •Built-in License—Cisco ISE comes with a built-in evaluation license, which is valid for 90 days. The evaluation license includes both base and advanced packages and limits the number of endpoints to 100 for both the base and advanced packages. Therefore, it is not required to install a regular license immediately upon installation.
    •Central Management—Licenses are centrally managed by the ISE administration node. In a distributed deployment, where two ISE nodes assume the Administration persona (primary and secondary), upon successful installation of the license file, the licensing information from the primary Administration node is propagated to the secondary Administration node. So there is no need to install the same license on each Administration node within the deployment.
    •Concurrent Endpoint Count—The Cisco ISE license includes a count value for base and advanced packages, which restricts the number of endpoints that use those services. The count value is the number of endpoints across the entire deployment that are concurrently connected to the network and accessing the service.
    Concurrent endpoints represent the total number of supported users and devices. An endpoint can be any combination of users, personal computers, laptops, IP phones, smart phones, gaming consoles, printers, fax machines, or other types of network devices.
    IMPORTANT : - Alarm is generated when the soft limit of endpoints is crossed and there is no functional impact on the users. To avoid service disruption, Cisco ISE continues to provide services to endpoints that exceed license entitlement. However there are plans to implement a hard limit on this soon.
    Regards,
    Jatin Katyal
    ** Do rate helpful posts **

  • Understand ISE Licensing

    Hello,
    I am going to Order (SNS-3415-K9) ISE product to deploy at my company, my concern is the size of license I shall order, and how to know the correct number
    I have workstations (PC’s), laptops, Printers, IP-CAM’s, and WLC with 50 AP.
    How I can determine the number of license I should get in order to have the benefits from Cisco ISE.
    Best reagrds,
    Samer Hasan

    Question:
    I am going to Order (SNS-3415-K9) ISE product to deploy at my company, my concern is the size of license I shall order, and how to know the correct number. I have workstations (PC’s), laptops, Printers, IP-CAM’s, and WLC with 50 AP. How I can determine the number of license I should get in order to have the benefits from Cisco ISE.
    Cisco Identity Services Engine (ISE) Ordering Steps
    Here’s guide which can help in finding solution of your problem
    1. Estimate the number of concurrent endpoints in the network.
    2. Estimate the number of appliances (physical or virtual) needed to support the number of concurrent endpoints
         in the network.
    3. Select the appropriate type of appliance suitable for your deployment. (Reference the appliance selection.)
    4. Select the appropriate type of license suitable for your deployment. (Reference the license selection.)
    5. Select the appropriate level of services available from Cisco Advanced Services or a Certified Partner for design,
        Deployment and sustaining services of the ISE deployment.
    Step 1: Estimate the Number of Concurrent Endpoints in the Network
    Estimating the total number of concurrent endpoints is dependent on a number of variables. An approach to consider would be to take into account:
    • Number of employees in the organization
    • Average number of devices per employee (desktop, laptop, smartphone, desk IP phone, etc.)
    • Number of switch ports currently in the organization
    • Number of access points deployed in the organization
    • Average number of devices per access point
    • Dynamic IP address range being used
    • Average number of guests expected to join the network
    • Inventory of non-user devices such as IP cameras, printers, IP-enabled projectors, etc.
    A combination of factors that includes but is not limited to the above factors could be used to determine the total number of concurrent endpoints in the network.
    Step 2: Cisco ISE Appliances and Servers* Options
    Cisco   Identity Services Engine Appliances
    Option 1: Cisco Identity Services   Engine Appliances and Servers*
    Product Number
    Endpoints Supported
    Cisco Secure Network Server 3415*
    SNS-3415-K9
    5,000
    Cisco Secure Network Server 3495*
    SNS-3495-K9
    20,000
    Step 3: Cisco Secure Network Server Support SKUs*
    Product   Number
    SMARTnet Part Number
    Description
    SNS-3415-K9*
    CON-SNT-SNS-3415
    Cisco SMARTnet support for   SNS-3415-K9 - 8x5 Next Business Day
    Step 4: Select the Type of License
    Step 5: Cisco ISE License Options
    License   Type
    Features Supported
    Deployment Type Supported
    License Prerequisite
    License Term(s)
    Base License
    AAA
    Guest Provisioning
    Link Encryption Policies
    Wired
    Wireless
    VPN
    Perpetual
    Advanced License
    Device Onboarding/Provisioning
    Device Profiling and Feed Service*
    Host Posture
    Security Group Access
    Integrated Vendor MDM Support*
    Wired
    Wireless
    VPN
    Base License
    3- and 5-Year Terms
    Wireless License
    Device Onboarding/Provisioning
    AAA
    Guest Provisioning
    Link Encryption Policies
    Device Profiling and Feed Service*
    Host Posture
    Security Group Access
    Integrated Vendor MDM Support*
    Wireless
    3- and 5-Year Terms
    Step 6. Cisco ISE Functionality-Based License Options
    License   Tiers (T)
    Number of Endpoints Supported
    Base License
    Advanced 3-Year License
    Advanced 5-Year License
    Wireless 3-Year License
    Wireless 5-Year License
    Wireless Upgrade 3-Year License
    Wireless Upgrade 5-Year License
    100
    100 Endpoints
    L-ISE-BSE-100=
    L-ISE-ADV3Y-100=
    L-ISE-ADV5Y-100=
    L-ISE-AD3Y-W-100=
    L-ISE-AD5Y-W-100=
    L-ISE-W-3UPG-100=
    L-ISE-W-UPG-100=
    250
    250 Endpoints
    L-ISE-BSE-250-
    L-ISE-ADV3Y-250=
    L-ISE-ADV5Y-250=
    L-ISE-AD3Y-W-250=
    L-ISE-AD5Y-W-250=
    L-ISE-W-3UPG-250=
    L-ISE-W-UPG-250=
    500
    500 Endpoints
    L-ISE-BSE-500=
    L-ISE-ADV3Y-500=
    L-ISE-ADV5Y-500=
    L-ISE-AD3Y-W-500=
    L-ISE-AD5Y-W-500=
    L-ISE-W-3UPG-500=
    L-ISE-W-UPG-500=
    1000
    1000 Endpoints
    L-ISE-BSE-1K=
    L-ISE-ADV3Y-1K=
    L-ISE-ADV5Y-1K=
    L-ISE-AD3Y-W-1K=
    L-ISE-AD5Y-W-1K=
    L-ISE-W-3UPG-1K=
    L-ISE-W-UPG-1K=
    1500
    1500 Endpoints
    L-ISE-BSE-1500=
    L-ISE-ADV3Y-1500=
    L-ISE-ADV5Y-1500=
    L-ISE-AD3Y-W-1500=
    L-ISE-AD5Y-W-1500=
    L-ISE-W-3UPG-1500=
    L-ISE-W-UPG-1500=
    2500
    2500 Endpoints
    L-ISE-BSE-2500=
    L-ISE-ADV3Y-2500=
    L-ISE-ADV5Y-2500=
    L-ISE-AD3Y-W-2500=
    L-ISE-AD5Y-W-2500=
    L-ISE-W-3UPG-2500=
    L-ISE-W-UPG-2500=
    3500
    3500 Endpoints
    L-ISE-BSE-3500=
    L-ISE-ADV3Y-3500=
    L-ISE-ADV5Y-3500=
    L-ISE-AD3Y-W-3500=
    L-ISE-AD5Y-W-3500=
    L-ISE-W-3UPG-3500=
    L-ISE-W-UPG-3500=
    5000
    5000 Endpoints
    L-ISE-BSE-5K=
    L-ISE-ADV3Y-5K=
    L-ISE-ADV5Y-5K=
    L-ISE-AD3Y-W-5K=
    L-ISE-AD5Y-W-5K=
    L-ISE-W-3UPG-5K=
    L-ISE-W-UPG-5K=
    10,000
    10K Endpoints
    L-ISE-BSE-10K=
    L-ISE-ADV3Y-10K=
    L-ISE-ADV5Y-10K=
    L-ISE-AD3Y-W-10K=
    L-ISE-AD5Y-W-10K=
    L-ISE-W-3UPG-10K=
    L-ISE-W-UPG-10K=
    25,000
    25K Endpoints
    L-ISE-BSE-25K=
    L-ISE-ADV3Y-25K=
    L-ISE-ADV5Y-25K=
    L-ISE-AD3Y-W-25K=
    L-ISE-AD5Y-W-25K=
    L-ISE-W-3UPG-25K=
    L-ISE-W-UPG-25K=
    50,000
    50K Endpoints
    L-ISE-BSE-50K=
    L-ISE-ADV3Y-50K=
    L-ISE-ADV5Y-50K=
    L-ISE-AD3Y-W-50K=
    L-ISE-AD5Y-W-50K=
    L-ISE-W-3UPG-50K=
    L-ISE-W-UPG-50K=
    100,000
    100K Endpoints
    L-ISE-BSE-100K=
    L-ISE-ADV3Y-100K=
    L-ISE-ADV5Y-100K=
    L-ISE-AD3Y-W-100K=
    L-ISE-AD5Y-W-100K=
    L-ISE-W-3UPG-100K=
    L-ISE-W-UPG-100K=

  • Is there a trial version of cisco ISE

    Is there a trial version of cisco ISE? I need to upgrade my knowledge from ACS to ISE and I am finding it difficult to find source material.
    Thanks
    Mark

    Q. Does the Identity Services Engine include an evaluation license?
    A. Yes. The Identity Services Engine includes a free 90-day evaluation license that can support up to 100 devices. The evaluation license supports Identity Services Engine Base and Advanced software packages.
    Q. Why isn’t there an evaluation license that includes the Plus software package?
    A. We want to make sure that prospective customers have an opportunity to explore all the ISE capabilities during an evaluation period. Moreover, with Plus being a subset of Advanced, there is no need to have a different evaluation license.
    Obtaining a Cisco ISE License from Cisco.com

  • Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

    Hi,
    I have two ISE-3315 Appliances in production network.
    I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
    And then I would like to know how to keep the license files and Certificate during the Upgrade.
    Please help me to answer my questions.
    Thanks
    CSCO11872447

    The Cisco Identity Services Engine (ISE) provides distributed  deployment of runtime services with centralized configuration and  management. Multiple nodes can be deployed together in a distributed  fashion to support failover.
    If you register a  secondary Monitoring ISE node, it is recommended that you first back up  the primary Monitoring ISE node and then restore the data to the new  secondary Monitoring ISE node. This ensures that the history of the  primary Monitoring ISE node is in sync with the new secondary node as  new changes are replicated.
    Please  Check the below configuration guide for Secondary ISE- Nodes.
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

  • How Cisco ISE 1.2 Base licenses are consumed and tracks concurrent endpoint connected to network

    Hello
    I am interested to know how the cisco ISE 1.2 base licences are consumed. As the cisco ise 1.2 user guide "The Base License is consumed whenever an authentication notification is received by Cisco ISE."
    Based on the above statement i have following queries :-
    Radius being the UDP based request, its only during the time endpoint is authenticated and authorized the base license is consumed and then its is released. Then how does cisco ISE tracks the concurrent endpoints connected to the network.
    Thanks
    Kumar

    thanks for the reply Tarik.
    As I understand, you mean that a base license is consumed by every radius authentication request and then the license is free to be utilised again
    Also would this means if Radius accounting is turned off, then concurrent sessions will not be tracked.
    Thanks
    Kumar

  • Cisco ISE functionally and license

    HI. 
    I wanna configure the following on Cisco ISE 1.2.1.
    Self-registration portal for guests (SSID: guests)
    802.1x user certificate check (Cisco NAM supplicant) for employees (SSID: Corporate) (EAP-TLS)
    Self provisioning portal (to deploy BYOD certificate and give access for BYOD devices) for BYOD devices (SSID: Corporate) (PEAP, MSHAPv2)
    Can I configure these things with PLUS license or do I need Adv or Wireless? I am not sure if one of these requires profiling functionally.

    With plus license all the above items should work.
    Here is what plus license supports:
    Bring Your Own Device (BYOD)
    Profiling
    Endpoint Protection Service (EPS)
    TrustSec SGT
    For more info, refer ISE license section:
    http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_license.html#41012
    Regards,
    Jatin Katyal
    **Do rate helpful posts**

  • Cisco ISE - expired demo license alarm

    Hi,
    We are implementing Cisco ISE 1.2.0.899 and have an alarm reporting expired license. This alarm refers to the Advanced License demo and is therefore a false positive.
    This issue is that we cannot remove the demo icense and stop the root cause of this false positive alarm.
    Does anyone has an idea?
    Thanks in advance.
    Regards,
    Telmo Oliveira

    Please refer the discussion below
    https://supportforums.cisco.com/discussion/12059041/ise-advanced-eval-license-alerts-after-full-base-install

  • Cisco application networking manager license file - unable copy to server

    Hi all
    We tried all the options like ftp,tftp,scp,etc., to copy cisco application networking manager license file from my pc to its server which has CISCO ADE OS .But unable to copy .can anybody know correct method to copy ??
    Thanks & Regards
    Sanjeevi

    Adrian,
    In order to install the license you must have a license file on the ANM server and install it through the command line:
    http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/application_networking_manager/4.1/installation/guide/IG_config.html#wpmkr1120937
    No other way to do it.
    License file can either be copied to the ANM file system, or you can create a new empty license file on it and copy paste the license file content.
    If you have no access to the ANM server through CLI, then a workaround might be:
         - install a new VMWARE machine where you have CLI access.
         - install ANM on it
         - copy license (other you copy the file through any means or you create a file and edit by copy pasting the license file content)
         - install license with the command  /opt/CSCOanm/bin/anm-license install /path/ANMxxxxxxxxxxxxxxxxx.lic as described in the link above
         - save the VMware image
         - deploy the same VMWare image to the ESX where it has to be installed and where you have no access to CLI neither you can copy a file.
    Hope this helps,
    Domenico.

  • How old licenses migration during basic and advanced cisco ise?

    Hello,
    How old licenses migration during basic and advanced cisco ise?
    Regards,
    Alvaro

    Hi,
    What do you mean by migration? you are migrating to another hardware? or you are upgrading from basic to advanced license?
    here is the install/upgrade process:
    http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_man_license.html#wp1059946
    If you are migrating from one device to another I think you need to use this link:
    https://tools.cisco.com/SWIFT/LicensingUI/Home
    HTH
    Amjad

  • Changing ISE hostname with application reset-config ise - license question

    Hello,I need to change the hostname of our ISE install.  TAC stated I need to use the command of application reset-config ise to do so.  I was wondering if my old license files can be reused or do I need to get new ones from Cisco.  I have a case open, but this work is being done this evening so I need an answer as soon as possible. Also, if any of you have any tips or tricks to get me through this process, I would love hearing them.Thank you!

    Thank you for the quick reply. I would just like to clarify that I can use the license files that were sent to me when we initially purchased the product.  I have to do the work tonight and don't want to hose my installation if I need to get new license files from Cisco.

Maybe you are looking for

  • Is this a possible setup? 3 AEBS - 2N 5GZ / 1 B/G

    I have a large single story home with a ton of walls and am looking for the best coverage and speed possible. The entire house is hard wired and I am now looking to blanket the home with 2 AEBS running at 5 GHz and 1 AEBS for B/G. Currently I have th

  • Where is the text stored when we create a discussion under Urgent Requests?

    Hello, Under the Urgent Requests when we create the discussions where is the text stored. Under which folder is the text stored? I would like to modify the text. Can anyone help me? Thnx in advance.

  • Lightroom 4.3 craches when using the brush after using redeye tool

    I have purchased Lightroom couple of days ago. I was travelling therefore I didn't have the time to upgrade to 4.3. The version shipped with the disk (4.1) was working like a dream. I have downloaded 4.3 yesterday and I couldn't be sadder. First I no

  • For Material Master

    Hi All We have a maintain a seprate text (Drawing No) for each material. We needs to pick the same in PO along with the material Discription Where we can maintain the same. As we can not maintain in MAKTX. Please Help Regards Niti Narayan

  • Update interactive report according to the filter of the user

    Hi all i'm working with Apex version 4.2/ i have an interactive rport page as we know it allows the user to make filtering ans sorting I want to do as follow : i created an interactive report in table CREATE TABLE EMP   EMPNO     NUMBER(4)