Cisco Jabber Client for iPhone over Juniper?

Does Jabber client support this? We do not currently have Juniper, but are considering moving to it. We are running Jabber Client 9.0.2.
Thank you                  

It is on premise deployment  . iphone uses the same dns as jabber for windows. As mentioned jabber for windows service discovery is working . I am using these on dns srv and A records
 _cisco-uds
 _cuplogin

Similar Messages

  • Directory Caching issue with Cisco Jabber client for Windows

    Hi ,
    I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
    Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
    Is there any automated way to remove the cache file? 
    Here is the detail of CUCM,Presence and Jabber.
    CUCM version: 9.1.x
    Presence          : 9.1.X
    Jabber              : 10.5 and 10.6

    Hello
    On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
    Network Device Enrollment Service.
    Our certificate for the CUPS were generated on this Certification Authority too.
    I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
    Enterprise Trust store for the users.
    But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
    I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
    Our partner left us alone with that unfortunately.
    Florent
    EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

  • Cisco Jabber Client for Linux

    Are there any plans to have a Cisco Jabber client on linux?

    Mike,
    The larger body of use case and development for Jabber has centered on Windows and mobile iOS and Android devices. That's not to say that there isn't a contingency of customers that want a Linux client but, as of today, there is no "Jabber" client for that platform. However, I've heard this question asked in a few different forums and the answer thus far has typically been one or both of the following:
    1) There is a Jabber SDK, which could potentially be used to custom develop an application.
    2) Use 3rd-party XMPP client (e.g. Pidgin)
    As for an official answer on "will there be in the future" with a yes/no/maybe and/or a possible timeframe, you would need to reach out to Cisco or your trusted partner as roadmap items cannot be discussed without having a non-disclosure agreement in place. That's what Jamie is getting at in his response.
    D. Hailey
    NetCraftsmen, LLC.

  • Cisco Jabber Client for Windows 9.7 Can't Connect to Other IPSec VPN Clients Over Clustered ASAs

    Environment:
    2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
    Both ASAs are at version 8.4(5)6
    IPSec VPN Client version: 5.0.07.440 (64-bit)
    Jabber for Windows v9.7.0 build 18474
    Issue:
      If I am an IPSec VPN user…
       I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
       I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
    In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

    Portu,
    Thanks for your quick reply.
    Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above.  I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
    I can, though, do whatever you want on the Linux router.  Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
    As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this.  (But I might need a bit of handholding if I need to set up a  wireshark andor tcpdump.)
    Thanks again.

  • Cisco Jabber Client for Windows 9.7 Can't Connect IPSec VPN Clients over two ASAs

    Environment:
    2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
    Both ASAs are at version 8.4(5)6
    IPSec VPN Client version: 5.0.07.440 (64-bit)
    Jabber for Windows v9.7.0 build 18474
    Issue:
      If I am an IPSec VPN user…
       I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
       I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
    In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

    Portu,
    Thanks for your quick reply.
    Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above.  I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
    I can, though, do whatever you want on the Linux router.  Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
    As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this.  (But I might need a bit of handholding if I need to set up a  wireshark andor tcpdump.)
    Thanks again.

  • Cisco jabber client for anroid

    Dear All;
    I have created android user under cucm and it works fine only one time if disconnected never connected until i restart all the phone services then it reconnect. I also tested the same on different android phone problem is same. 
    Kindly suggest me what could me the issue. I am enclosing the pdf document through which i created android users.

    Assuming you mean Jabber Voice 9.1(5) for Android.
    Your phone is not listed as supported handset; the fragmenetation of the Android platform tends to lead to unreliable behavior on most handsets. The release notes stipulate what is supported.
    What do the logs from the client or a packet capture from the CUCM server show when the client is attempting to reconnect?

  • A list of supported Android Phones for Cisco Jabber Client.

    Hi there,
    I opened a discussion before about the Cisco Jabber Client for Android phones.
    This product from Cisco is only official support bij a several mobile Android telephones. (very poor)
    As everyone knows is that the mobile market is continious in development. Since a half year the official support phone list is still the same, but a lot of new Adroid phones are now on the market.
    It's even so worse that some of the Cisco supported phones, are not available anymore in the market.
    - Samsung Galaxy S2 becomes a Samsung Galaxy S3
    - Samsung Galaxy TAB is still there
    - Samsung Galaxy S (are not available anymore) The S1 or S Plus are now becoming the Samsung Galaxy S Advanced.
    At what are the alternatives?
    Still the list on the documentation is out-dated.
    See:
    Samsung Galaxy S International (GT-I9000) with Android operating system (OS) Version 2.2.1 or 2.3
    Samsung Galaxy Tab International (GT-P1000) with Android 2.2.1 or 2.3
    Samsung Galaxy S II (AT&T) with Android 2.3
    To use Cisco Jabber for Android on the Samsung Galaxy S device, it is important that you upgrade your handset OS to Android Version 2.2.1 or 2.3. See the manufacturer/carrier site for more information about how to update the OS on your device. Minor voice quality issues may be experienced depending on the device used.
    So hopefully Cisco is still working on the Cisco Jabber solution, and a lot of mobile Android phones will be supported so the road to success will be open.
    Hopefully someone can help me to list of tested and supported phones (Official bij Cisco)
    Kind regards,
    Edgar

    The official list of tested Android phones is what you've already discovered.  With the next release of Cisco Jabber for Android, I'm sure it will be updated.
    While the official list of what we tested is short, the client will work on many Android devices and TAC will provide support if you run into technical issues; provided the issue is with the Cisco Jabber client itself, and not with the OS of the manufacturer.
    If there is a specific Android phone you are looking to have officially tested by Cisco, PM me with that information and I'll work with you to see what we can do to get it added.

  • Jabber Client for CME license

    i have CME 2921 ISR router and i need to implement cisco jabber client for 50 user
    is this needs a license or not
    if yes, please provide me how to orser it and what is its part number
    thank you very much

    If you are going to use Jabber, that counts like a regular SIP Phone, just like 7945, or 99XX phones, you don't need an additional  license:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1058022
    HTH
    Jorge Armijo
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Cisco Jabber client with other telephony devices

    Hi,
    I am completely new to Jabber and just started to understand Cisco jabber client for windows.
    I understood that the jabber client supports xmpp for IM and CTI integration with Cisco Call manager for call control.
    Is there a provision to integrate the jabber client to non-Cisco devices like Avaya or nortel or an ITS Netrix turret?
    Integrate direct or indirect - as in with a plugin
    Please do direct to any available documentation that would help
    Thanks

    Hi,
    Welcome to Jabber! Yes, the client supports XMPP and CTI.
    And yes you can use your existing Avaya / Nortel phones using a Cisco UC feature called Extend and Connect. No plugin required! It allows Jabber to CTI control any phone with a dialable number, including public phones. You can read more about the Extend and Connect feature here: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91_chapter_0110010.pdf
    To configure it for Jabber for Windows you can follow these instructions:
    http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_1/JABW_BK_E4CC9599_00_environment-configuration-guide_chapter_010.html#JABW_CN_EB63387E_00
    Regards,
    Matt

  • Unable to select 'Use Phone for audio calls' on Cisco Jabber Client 9.6 for Windows

    Hi,
    I have recently deployed Cisco Presence Server and integrated with Call Manager 9.1.2. I have successfully deplyed 6700 users on IM & Presence. Some of the users requested for Cisco Jabber with phone control.
    I have added CFS client on the Call Manager and associated it with the same extension numbers from their desk phones. I am currently able to make audio and video calls for these specific users. I am currently using Cisco Jabber Client 9.6 for windows. I have users both daisy chained to their desk phones and who are not. Can you please confirm if it does make any difference.
    Problem Faced -
    I am not able to use to option use phone for audio calls. The phone comes down with a cross sign on it. At the same time Cisco Jabber by default uses the client and it works as expected.
    Can you please let me know if any of you guys have faced a similar issue.
    Please let me know if you need any information regading the configuration used.
    Looking forward for your valuable comments.
    Thank you.
    Regards,
    Joseph Chirayath.

    Hi Will,
    I am attaching the screen shot for the END USER on CUCM 9.X that has been configured on Cisco Jabber.
    Please do let me know if you need any further information.
    Thank you.

  • Unable to Externally Register Phone Services on Cisco Jabber Client via Expressway E

    Hi,
    I have currently deployed Cisco Jabber along with Expressway C and E for external regeneration without VPN. I have successfully registered IM and Presence service externally on the internet and I am able to chat with other Jabber users.
    I am not able to register phone services for Cisco Jabber client who are registering externally over the internet without VPN.
    I have checked that all the users are able to use IM and Presence along with Phone services in the internal network and over the internet using VPN. I have configured the required DNS SRV records on both the internal and external DNS Servers.
    I am attaching a screen shot of the Jabber Client that is registered over the internet along with this post for your reference.
    Appreciate if you can share your thoughts on the same.
    Please do let me know if you need any further informaiton.
    Thank you.
    Regards,
    Joseph Chirayath.

    I am testing with an android device, and I had to add a "digest user" on the BOT device in order for this to work. Phone services are now connected.

  • Cisco Jabber Client - QoS Config

    Hi Guys,
    I'll be deploying the new jabber client for a customer and i'm unsure of what QoS to configure on the switch ports for end users. Users will also have 7942 handsets, so if i configure auto qos voip cisco-phone, I doubt this will protect the voice/video for Jabber.
    Has anyone got any config or tips they can share?
    Cheers,
    James

    Hi,
    I believe you can use "auto qos voip cisco-softphone"
    Please see below QOS SRND.
    http://www.cisco.com/univercd/cc/td/doc/solution/esm/qossrnd.pdf
    Regards
    Ronak

  • Jabber voice for iPhone 9.1.7 crashes on iPhone 5S

    Few users reported that Jabber voice for iPhone crashes on 5S after updating to latest 9.1.7 version. App loads, register to CUCM but crashes when using dial pad and application closes itself. App works on iPhone 4.
    Does anyone else have the same issue?

    The following error is reported via Console:
    iPhone ReportCrash[4722] <Notice>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/Jabber Voice_2014-05-19-083318_"removedname".plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0
    May 19 08:33:19 iPhone Jabber Voice[4724] <Warning>: Stderr redirected to: /var/mobile/Applications/0CDDD8A3-0BD0-40DA-AFCA-8B32C71B0187/Documents/Logs/Jabber Voice-2014-05-19-08331907-Console.log
    May 19 08:33:19 iPhone Jabber Voice[4724] <Notice>: (Error) [ABLog]: ABPeoplePickerNavigationController does not support subclassing in iOS 7.0 and later. In the future, a nil instance will be returned.
    Issue happens on iPhone 5S running 7.0.6 or 7.1.1 iOS. 

  • No Jabber client for Windows Phone 8.1

    Can you advise on when a Jabber client for Windows Phone 8.1 will be released?

    Roadmap questions cannot be addressed here, either ask in a partner forum, or reach your SE/AM for this.

  • Jabber Client for Windows video not working with ManyCam

    Hi everyone.  We've been kicking around the Cisco Jabber client and I've noticed a small issue when it comes to video.  I use a software package called ManyCam (http://www.manycam.com/) which creates a web cam that allows me to put effects on my actual web cam's video feeds.  Primarily I use it when I'm in a remote office and have a video stream back to the main office I can put effects on the screen like "On a conference call" and such so people won't get upset when they approach me and I fail to respond to them.  I use it with other applications just fine but with Cisco Jabber (v9.2.0 Build 496) when I attempt to set it the ManyCam camera as the video source in the video configuration of Cisco Jabber the preview doesn't appear.  As well when I connect to another Cisco Jabber user they do not see my video stream.
    Anyone else notice this?  Or does anyone else have a link to some similar software that will give me equivalent functionality to ManyCam that works with Cisco Jabber?
    Thanks!

    Only if they are on a Mac using iChat(gmail account).
    Have a look at http://mail.google.com/videochat

Maybe you are looking for