CIsco Jabber Connect with SX20-MSS Device

Hi,
I have a Cisco Sx20 Device along with MS feature, In this i have installed Cisco Jabber in my IPAD2 integerate with CUCM8.6.
My query is if i am dialing a point to point, from Sx20 to Ipad2, it was working fine. If i am trying to establish a Multisite in the VC device, i am unable to connect the IPAD2 in multisite,
Kindly suggest me, Ipad2 will work Multisite in sx20, or we required MCU to connect IPAD2 in multisite.
Regards
Mohan.J

Hi Mohan,
This forum is related to the Cisco Jabber Video beta service (ciscojabbervideo.com).  I believe you may want to reach out to the Cisco Jabber support community (linked from the banner at right).
Raj

Similar Messages

  • Cisco Jabber client with other telephony devices

    Hi,
    I am completely new to Jabber and just started to understand Cisco jabber client for windows.
    I understood that the jabber client supports xmpp for IM and CTI integration with Cisco Call manager for call control.
    Is there a provision to integrate the jabber client to non-Cisco devices like Avaya or nortel or an ITS Netrix turret?
    Integrate direct or indirect - as in with a plugin
    Please do direct to any available documentation that would help
    Thanks

    Hi,
    Welcome to Jabber! Yes, the client supports XMPP and CTI.
    And yes you can use your existing Avaya / Nortel phones using a Cisco UC feature called Extend and Connect. No plugin required! It allows Jabber to CTI control any phone with a dialable number, including public phones. You can read more about the Extend and Connect feature here: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91_chapter_0110010.pdf
    To configure it for Jabber for Windows you can follow these instructions:
    http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_1/JABW_BK_E4CC9599_00_environment-configuration-guide_chapter_010.html#JABW_CN_EB63387E_00
    Regards,
    Matt

  • Challenge: Spanning Tree Control Between 2 links from Switch DELL M6220 to 2 links towards 2 switches CISCO 3750 connected with an stack (behavior like one switch for redundancy)

    Hello,
    I have an Spanning tree problem when i conect  2 links from Switch DELL M6220 (there are blades to virtual machines too) to 2 links towards 2 switches CISCO 3750 connected with an stack (behavior  like one switch  for redundancy, with one IP of management)
    In dell virtual machine is Spanning tree rapid stp, and in 3750 is Spanning tree mode pvst, cisco says that this is not important, only is longer time to create the tree.
     I dont know but do you like this solutions i want to try on sunday?:
     Could Spanning tree needs to work to send one native vlan to negociate the bdpus? switchport trunk native vlan 250
    Is it better to put spanning-tree guard root in both 3750 in the ports to mitigate DELL to be root in Spanning Tree?
    Is it better to put spanning- tree port-priority in the ports of Swicht Dell?
    ¿could you help me to control the root? ¿Do you think its better another solution? thanks!
     CONFIG WITH PROBLEM
    ======================
    3750: (the 2 ports are of 2 switches 3750s conected with a stack cable, in a show run you can see this)
    interface GigabitEthernet2/0/28
     description VIRTUAL SNMP2
     switchport trunk encapsulation dot1q
     switchport trunk allowed vlan 4,13,88,250
     switchport mode trunk
     switchport nonegotiate
     logging event trunk-status
     shutdown
    interface GigabitEthernet1/0/43
     description VIRTUAL SNMP1
     switchport trunk encapsulation dot1q
     switchport trunk allowed vlan 4,13,88,250
     switchport mode trunk
     switchport nonegotiate
     shutdown
    DELL M6220: (its only one swith)
    interface Gi3/0/19
    switchport mode trunk
    switchport trunk allowed vlan 4,13,88,250
    exit
    interface Gi4/0/19
    switchport mode trunk
    switchport trunk allowed vlan 4,13,88,250
    exit

    F.Y.I for catylyst heroes - here is the equivalent config for SG-300 - Vlan1 is required on the allowed list on the catylyst side (3xxx/4xxx/6xxx)
    In this example:
    VLANS - Voice on 188, data on 57, management on 56.
    conf t
    hostname XXX-VOICE-SWXX
    no passwords complexity enable
    username xxxx priv 15 password XXXXX
    enable password xxxxxx
    ip ssh server
    ip telnet server
    crypto key generate rsa
    macro auto disabled
    voice vlan state auto-enabled !(otherwise one switch controls your voice vlan….)
    vlan 56,57,188
    voice vlan id 188
    int vlan 56
    ip address 10.230.56.12 255.255.255.0
    int vlan1
    no ip add dhcp
    ip default-gateway 10.230.56.1
    interface range GE1 - 2
    switchport mode trunk
    channel-group 1 mode auto
    int range fa1 - 24
    switchport mode trunk
    switchport trunk allowed vlan add 188
    switchport trunk native vlan 57
    qos advanced
    qos advanced ports-trusted
    exit
    int Po1
    switchport trunk allowed vlan add 56,57,188
    switchport trunk native vlan 1
    do sh interfaces switchport po1
    !CATYLYST SIDE
    !Must Explicitly allow VLan1, this is not normal for catalysts - or spanning tree will not work ! Even though it’s the native vlan on both sides.
    interface Port-channel1
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 1,56,57,189
    switchport mode trunk

  • WRT160N Won't Connect With Windows Mobile Device

    I had another wireless router for years that connected almost instantly to my Windows Mobile 6.1 handheld device.  I switched to the WRT160N and it works great with my wireless laptops.  The device does not even show up in my available device lists on my Windows Mobile phone with wi-fi.  I tried manually connecting and it does not work.  I tried all of the other security settings, it does not work. The phone manufacturer (not the sevice provider which is Verizon) has acknowledged that they are having calls only about Cisco branded routers.  Does anyone have a solution?

    I had exactly the same problem. Tried the live technical support chat but didn't solve the problem. Resorted to random changing of settings and discovered if I changed the router setting Wireless -> Basic Wireless Settings - Network mode from 'Mixed' to 'BG-Mixed' my Windows Mobile 6.1 device found the network and happily connects with WPA2

  • Cisco ISE integration with SMS passcode Device

    HI Experts,
    i have a scenario where the requirement is to integrate the ISE device with SMSpasscode device which will trigger the OTP to the mobile devices 
    Currently i have my authentication configured to work with the AD 
    When my VPN users connects  its authenticates against AD and the users get the access . 
    Now as per the new requirement once the user is authenticate against AD ,  the user should be prompted for the OTP password send to the users  using SMS passcode device 
    Anyone had worked on similar requirement please help me to resolve the issue .
    Thanks in advance 
    Angus

    Hi all
    I am working exactly for a month on this topic with no success.
    I need to integrate VASCO OTP solution. But VASCO do not support any external authentication backend for virtual/SMS token. Only passcode or local authentication.
    I need to implement an external authentication against LDAP somewhere...
    Gunnar, do CISCO clearly says it is not able to participate to such setup?
    So, my need would be to be able to insert in the flow an authentication in ISE against the LDAP.
    The flow is:
    WebApplication send login+password (LDAP) to ISE
    ISE checks the credentials and if it is OK forward the request to VASCO
    VASCO does not check for password but generate the OTP and send it via SMS
    VASCO replies with a access-challenge
    ISE forward the challenge to Web Application
    WebApplication send login+OTP response to ISE
    ISE forward to VASCO
    VASCO checks for OTP and replies to ISE with accept
    ISE forward to Web Application
    User is logged in...
    All the flow is working if the user enters a passcode
    I would like to implement a Identity source sequences where the user is checked again all the entries not the first match
    First LDAP then VASCO...

  • Why can't my Ipad2 connect with any bluetooth devices?

    My Ipad 2 cannot connect to anything. I bought a keyboard that is compatible with the Ipad 2 recently, and when i tried to connect them an error will always occur. My Ipad can see the keyboard so i click on it, and it tells me to put a pin number on it. I type the pin, press enter, and it just says to make sure my device is in range, ready, blah blah blah. So then, i returned that, and bought a more expensive keyboard because i thought it was the keyboard that wasnt working. So i got a new one and still, the same problem. My ipad just cant read the device to connect em together. If you are curious, i currently have the Verbatim Foldable keyboard. PLEASE HELP ME ):
    thank you~

    If I were you, I'd take my iPad and the keyboard to the Apple Store (make an appointment at the Genius Bar first).  If they can't get your device paired, you may have a hardware issue.
    One thing I would try first is a reboot:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.  Try pairing once more and if unsuccessful, off the Apple Store you should go......

  • Cisco Unity Connection with LDAP Problem

    Hello,
    I have a CUCM and Cisco Unity and an LDAP Server 2008,
    When I configure CUCM with LDAP, users are imported, but when I did the same method for integrating Cisco Unity with ldap does not work, when I click "Import User" via LDAP I find a user who call "Token_User_8b191a06-5041-4b41-bd5f-0575fde674e3" without extension, and no user is imported
    Unity Version : 9.0
    CUCM Version : 9.0
    LDAP : Windows 2008 Server
    Regards,
    Younes CHAFI.

    Ok, there sre two things to do now..
    1. Restart CUC..If you have already done that, then do opion 2
    Utils service system restart
    2. Take captures from cuc.. (once you start the capture, then go and try and force the ldap sync)
    https://supportforums.cisco.com/docs/DOC-11599
    Instead of using RTMT to collect the files, you can also use a SFTP tool like free FTPD..
    Example below:
    admin: utils network capture file mycap count 100000 size all host all 10.5.244.10
    Executing command with options:
    size=all count=100000 interface=eth0
    src= dest= port=
    ip=10.3.2.21
    The trace continues until you press Ctrl-C.
    Step 3: Download the Trace File
    OK, so now you have a file somewhere on the system with the data that you would really like to view.  You have to download it to your machine.  You will need a running SFTP server on the target machine.  You can use openSSH on linux/unix, freeFTPd, copSSH, or something similar.
    admin:file get activelog platform/cli/newcap.cap
    Collect the capture and attach here
    Please rate all useful posts
    "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

  • Once an updated image, photo, text is sent into the cloud, and it connects with the other devices, how long does it stay in the cloud?

    I've updated my iPhone4 with IOS5, and both my MacBook Pro and iMac with Lion.  If I wish to use iCloud or Cloud, and want to share with other devices something like a note on the iPhone, with my iMac, say for editing reasons; once the item gets to the other device(s), how long does the shared item stay in the cloud?  And, can it be removed to free up space or is it always there in whatever version?

    Poulton-le-Fylde, UK
    Do I have a choice as to what actually gets transferred into the cloud or does it take what it wants?  What if I don't care to share particular data with another device, does the cloud take it anyway?

  • New to the iphone, I cannot connect with the bluetooth to other devices, any help?

    I have a new IPhone 4, I cannot connect with other bluetooth devices - any help??

    What, exactly, are you trying to pair your phone with? These are the only supported bluetooth profiles:
    http://support.apple.com/kb/ht3647

  • Unable to Externally Register Phone Services on Cisco Jabber Client via Expressway E

    Hi,
    I have currently deployed Cisco Jabber along with Expressway C and E for external regeneration without VPN. I have successfully registered IM and Presence service externally on the internet and I am able to chat with other Jabber users.
    I am not able to register phone services for Cisco Jabber client who are registering externally over the internet without VPN.
    I have checked that all the users are able to use IM and Presence along with Phone services in the internal network and over the internet using VPN. I have configured the required DNS SRV records on both the internal and external DNS Servers.
    I am attaching a screen shot of the Jabber Client that is registered over the internet along with this post for your reference.
    Appreciate if you can share your thoughts on the same.
    Please do let me know if you need any further informaiton.
    Thank you.
    Regards,
    Joseph Chirayath.

    I am testing with an android device, and I had to add a "digest user" on the BOT device in order for this to work. Phone services are now connected.

  • Cisco Jabber for Windows Voicemail issue

    At this I'm in processing of implementation Cisco Jabber UC solution for big Company.
    I use CUCM 9.1.2, Cisco IM and Presence 9.1.2, CUC 9.1.2, Cisco Jabber for Windows 9.6.1.
    I have issue in Cisco Jabber with VoiceMail Integration - when I leave voice message for any user,
    than this message is arrived only him Cisco IP Phone, but not in him Cisco Jabber.
    From Cisco Jabber Connectivity status in help menu I see that VoiceMail service is successfully connected
    and I see VoiceMail button in Cisco Jabber.
    How can I resolve this issue?

    Have you configured the UC Service profile on CUCM with both Voicemail server and mailbox servers?

  • My ipod not connect with i tunes

    my ipod not connect with i tunes

    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • Regarding Transfer speed in Cisco Any Connect

    Hi,
    I was trying to check transfer speed from Cisco Any Connect, with only ports opened in firewall 443 & 80 with 1 destination , but to complete data transfer of 50MB file it takes around 40mins, but if all ports are unblocked in Firewall with 1 destination ,it takes only 9mins.
    so wanted to know the correct port numbers which needs to be opened to make data transfer speed fast & why this behaviour.
    Please somebody help me.

    a customer has confronted me with a similar issue. They are using AnyConnect SSL Clients in their LAN, and noticed a severe performance drop on client side once connected via AnyConnect.  I have set this up in a lab environment to compare LAN performance with AnyConnect SSL performance.
    Win7 Client                                                                                                                
    AnyConnect                                              ASA5520                                                    Win7 iperf Server
    Secure Mobility -----------1Gb LAN---------------- v9.1.1---------------------1Gb LAN--------------------  TCP Window Size 4MB
    3.1.02040
    The ASA was configured from factory default and there was no traffic passing besides this test. AnyConnect used DTLS, and interface mtu on the ASA was 1500, the AnyConnect mtu was left unmodified, so I suspect the maximum of 1406 bytes was used.
    Result:
    - While AnyConnect was disconnected, Iperf reported bandwidth usage of about 300Mbps. This was what I was expecting.
    - As soon as I was connected via AnyConnect, the bandwidth usage dropped tp about 80Mbps. I expected a slight drop, but not this much.
    What causes such decrease in performance? Sure, if connected via the Internet, clients will most likely never notice this, but the customer uses AnyConnect SSL in a Gigabit LAN environment. Could the bottleneck be on the client side? The load and memory usage on the ASA side was very low. I have tried several ASA versions, but they all deliver similar results.

  • 9630 does not connect with Bluetooth Car Kit Speakerphone

    Whenever I try to make a call with my Motorola T215 Car Kit Speakerphone, my BlackBerry 9630 Tour "smart"phone says, Connection to Motorola T215 failed.  I have followed the pairing instructions that came with the car kit precisely and repeatedly, but still get the same result.  To add even more enjoyment to my experience, my connection with the Bluetooth device seems to go on and off as it pleases.  I figure the only way to put an end to this issue is to smash it with a hammer, but if you know of another solution, I would appreciate it.  My carrier is Sprint, and OS version is 4.2.0.285. 

    The first thing I would suggest doing it running an upgrade on your device software. To do this you will need your USB cord and access to the internet.
    Go to: www.blackberry.com/update and then follow the prompts to update your device software.
    This should back up your device data automatically, but to be save incase of any situation that may arise do a backup of your device through the BlackBerry Desktop Software.
    Once the update is done, test the Bluetooth connection.
    Hope this helps.

  • How can I share my Internet with my other devices

    I have been assigned a temporary home for the next few months. The only Internet available is via a USB Dongle. The family uses iPads for their daily pleasure. Is there a way to create a shared network from my Mac Book Pro running Mountain Lion OS?

    Hi V3LV3TP0RKR1ND,
    You can use Internet Sharing to share your connection with your iOS devices:
    OS X Mountain Lion: Share your Internet connection
    http://support.apple.com/kb/PH10740
    Cheers!
    - Ari

Maybe you are looking for