Cisco Jabber for Telepresence 4.6.3 Setting for "Webex Telepresence" Cloud Service

I am looking for the server setting that can be installed into the Cisco Jabber for Telepresence Client (MOVI) that will allow it to connect to the "Webex Telepresence" cloud service. I cannot find a download anywhere that has the infomation re-configured for the "Webex Telepresence" service.
Thanks for your help in advance
Tim
Well after a few hours of searching i have the Answer
The Client can be downloaded from: http://download.telepresence.webex.com/MCX/4.6.3.17194/WIN/JabberVideo_4.6.3GA.exe
This will come with the following setting pre-configured: Sign-in Setting > Internal Server: https://boot.telepresence.webex.com/tmsagent/api/rest/devices/movi/provisioning
If you have the JabberVideo Client installed and just want to change where it gets provisioned from VCS or Webex Telepresence then you should be able to use your current client and just change the internal server settings and clear the external setting.
Then you will need to use your Webex Telepresence Login ID and Password.
Hope this helps Someone.
Tim
Message was edited by: Timothy Shire

A1: Because it can use either (webex or CUPS), there are two deployment modes, all is on the documentation if you haven't gone thru it.
You type in what it's asking, nothing more. Choose one, and then use the CUPS hostname, DNS is basically mandatory, the PC needs name resolution for all you have configured (VM/CUCM/etc)
A2: No, it can be IM&P, full UC and phone mode. No, Full UC and phone mode use the PC for media termination, deskphone control uses the phone for media. Did you change the parameters during install for phone mode??? If not, it's not in phone mode.
A3: No, that can be many things, DNS, connectivity, credentials, etc
You mention DNS is not used, so, most likely that's the problem.
I'd strongly recommend you to review the whole deployment guide for Jabber for Windows.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

When you back up your Iphone/Ipad it backs up for camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?

When you back up your Iphone/Ipad it backs up your camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?

What do you mean by storage quota, does that mean i could be photo streaming about 1gb of photos and it does not get taken away from my free 5bg.

Cisco Jabber 10.5 call pickup feature - just for added contacts?

Hi everyone,
we are checking out the new Cisco Jabber for Windows client. The call pickup feature is the best new feature so far.
The only issue we are running into: as we are using global pickup groups devided by office we now see every call coming in for everyone.
I would suggest that it would be much better if you could choose, for which group of contacts you would like to enable the call pickup.
Is there a roadmap for this in the future of Jabber call pickup feature? Would be a very appreciated Addon.
Thanks & Cheers!

Roadmap questions cannot be discussed here, either post this question on a partner forum, or reach your AM for this.

Password for oc4jadmin is not being set for silent install.

Application Server 10.1.3 for Windows
I have recorded a silent install response file. I have added the following line in order to set the password of the oc4jadmin account, but it does not appear to work because I get an invalid username/password when loggin in to the App Server console.
oracle.iappserver.instance:szl_InstanceInformation={ "cm1" , "hello123" , "hello123" }
This line worked fine in version 10.1.2.
Any clues on what could be going wrong?
- Thanks

Can you try with the following line in the install response file:
sl_adminDialogReturn={"ias7023","oc4jadmin","welcome1","welcome1","Using the local Application Server Control installed with this instance"}

Layout for packing list cannot be set for specific customers

It is not possible to set an standard layout for the packing list for specific customers. So, if you have layouts in different languages, you have to check the standard layout every time before you print and to set the right one. In other documents it is possible to set an standard layout for specific customers/suppliers for example depending on the language.
kind regards,
Markus Niebergall

Hi Engin,
Have you followed the ios tutorial which sybase provides :
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01213.0200/doc/html/title.html
if you get "login success" at console it seems everything fine there may be something missing.
Regards
Tahir

Cisco jabber for android no ask outgoing call

Is available:
1) cucm 8.6
2) The samsung galaxy S4 mini smartphone (android 4.2.2) with the client of cisco jabber for android v 9.1.4
On the smartphone, in the cisco jabber settings, it is specified - to ask for each outgoing call through what to ring.
If to open the address directory of phone and to click a call, the call is made through SIM a card.
How to set up, what the request through what to make an outgoing call would be output?

Take in mind the supported list of devices, in my experience it can be troublesome if you want to uses some of the brands not listed (I played with a Huawei and a LG without luck)
Check http://www.cisco.com/c/en/us/products/collateral/unified-communications/jabber-android/data_sheet_c78-649887.html (Device and OS Requirements)
Regards.
Rolando Valenzuela.

Unable to Externally Register Phone Services on Cisco Jabber Client via Expressway E

Hi,
I have currently deployed Cisco Jabber along with Expressway C and E for external regeneration without VPN. I have successfully registered IM and Presence service externally on the internet and I am able to chat with other Jabber users.
I am not able to register phone services for Cisco Jabber client who are registering externally over the internet without VPN.
I have checked that all the users are able to use IM and Presence along with Phone services in the internal network and over the internet using VPN. I have configured the required DNS SRV records on both the internal and external DNS Servers.
I am attaching a screen shot of the Jabber Client that is registered over the internet along with this post for your reference.
Appreciate if you can share your thoughts on the same.
Please do let me know if you need any further informaiton.
Thank you.
Regards,
Joseph Chirayath.

I am testing with an android device, and I had to add a "digest user" on the BOT device in order for this to work. Phone services are now connected.

Need Cisco Jabber Client in personal profile

Cisco Jabber earlier it was there in appstore for BB8520 but after I done research I found that it was available now for Enterprise But problem here was I cannot enable workspace as currently our company or my client does not have BlackBerry Enterprise Services…
Is there any way to install Cisco Jabber on personal profile?

it was good to have 8520. Missing Jabber on z3.

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Bt rfs date set, for about a few months ago :(

So basically my elderly exchange which i get a measly 7mbps off had its rfs date set for 21CN and adsl2 (woohoo me though, good internet speeds for once!) it was set for:
BT have announced a ready for service date for this exchange. The estimated go live date is between 13th April 2012 and 31th May 2012.
So basically i probably think its not gona be done, as most people in my area are quite old and the exchange only serves 2000 people. My exchange is holymoorside btw, so who wants to vote will they finish it in 11 days?
Who knows (im guessing ill probably be stuck on slowness for a while to come)

My exchange with 1,270 residential premises, not sure how old it is, had a 21CN rfs date of 31st March. I was upgraded on 24th April, although not to ADSL2+ according to the experts on here. I am delighted to have a doubling of my speed from 1.2 to 2.4Mbps. Many people in my village get ~100Kpbs and some can’t get broadband at all. So at 7Mbps we would all be over the moon, can we all move to your exchange please !
Best regards,
dfenceman

Nokia E6 - Where is the Access point setting for Y...

I have my Nokia E6 configured for my Corporate Email, MfE and it works fine. In the settings for MfE, I see a setting for Access Point, where I choose Internet with Priority 1 as my Home WLAN and Priority 2 as my GPRS connection.
Then, I started to configure my private Yahoo mail, evertyhing is done, it works fine, but I do not see any settings for Access Point for the Yahoo mail..
Does this mean it picks up the settings from MfE???
Can any other NOkia E6 users or experts comment on this??

Hi Stuart,
To answer your question:
There is no shared secret for the ACS itself.
If the ACS is going to communicate with another device, you have to define a AAA client and define a shared secret.
ACS 4, used that shared secret to protect/secure the replication, in ACS 5, the replication secured with encryption and not shared secrets(hash).
Rate if useful

Problem setting up the UCP Web Service

I am new to CISCO and my first project is to set up the UCP Web Service. I don't have access to the web interface on ACS but I was told that acs config-web-interface ucp enable was run.
I have in the UCP file on tomcat
C:\Tomcat 7.0\webapps\ROOT\UCP
within the UCP file I have :
META-INF
pythonImport
pythonUCP
WEB-INF
index.jsp
wsdl.xml
With that set up I get to the index.jsp page. When I put the information in I get the following error message:
HTTP Status 404 - /UCP/UcpServlet
type Status report
message /UCP/UcpServlet
description The requested resource (/UCP/UcpServlet) is not available
I am sure I have done some sad and strange things. Can someone point me in the right direction? A simple stupid one at that...
Thank you so much

Hi,
Is there solution for this issue? I also have encounter similar problem:
An error occurred at line: [14] in the generated java file: [C:\Program Files\Apache Software Foundation\Tomcat 7.0\work\Catalina\localhost\_\org\apache\jsp\indexacs_jsp.java]
Only a type can be imported. com.cisco.nm.acs.mgmt.common.version.VersionFileReader resolves to a package
An error occurred at line: 23 in the jsp file: /indexacs.jsp
VersionFileReader cannot be resolved
It's seems there is a missed library (VersionFileReader) for JSP, does anyone can guide me to find it?
Thanks,
Rp

Cisco Jabber for Windows 9.2.6 (setting registry keys)

All,
I would like to be able to set the general option for Cisco Jabber to force the client to, "Start Ciso Jabber when my computer starts" option. Is this a registry setting I can force? I'd also like to force calendar intergration with Microsoft Outlook by default as well. We are using SCCM to push Jabber via RAP. Are these registry settings HKCU or HKLM? Thanks Phillip

Hi Phillip,
you may find more details on Installation and Configuration guide how to set Start_Client_On_Start_OS parameter in jabberConfig file.
Keep in mind that values set in JabberlocalConfig.xml have presedence over value set in jabberConfig.xml file from TFTP server.
Regards,
Nebojsa

Login failure - Cisco Jabber 9.2.4 for windows

I have built up CUCM 8.6(2a), CUPS 8.6(5), and integrated them according to the cisco official docs.
Now, I finished the configuration according to the Jabber install guide & Server Setup Guide. However, the first login experience indicates that Jabber is a quite tricky software to deal with.
When I run Cisco Jabber for Windows 9.2.4 for the first time, it prompt me as below,
Server Type: Cisco Webex / Cisco Unified Presence
Login Server: Server address / Domain
Q1: What is going on there? Whe Webex get involved here? Why CUCM is not listed as a Server Type? How should I input here for a successful login (My CUCM IP: 192.168.169.11, CUPS IP: 192.168.169.12, DNS is not used here, let alone Domain)?Those parameters and steps are never mentioned in the End user Guide. The Jabber is not behaving as expected at all !!
Q2: As far as I know, Jabber can work in only 2 modes, Full UC Mode, Phone-Mode, only difference between them is media terminates at PC or desktop phone. Am I right? how can I determine which mode I am currently in?
Q3, In Connectin Setting Diagram, I select Cisco Unified Presence as server type, and input CUPS IP for Server Address & Domain, then, I use end user ID and password configured on CUCM to login, but end up with "cannot communicate with the server". Is that a bug ?
Thanks in advance.

A1: Because it can use either (webex or CUPS), there are two deployment modes, all is on the documentation if you haven't gone thru it.
You type in what it's asking, nothing more. Choose one, and then use the CUPS hostname, DNS is basically mandatory, the PC needs name resolution for all you have configured (VM/CUCM/etc)
A2: No, it can be IM&P, full UC and phone mode. No, Full UC and phone mode use the PC for media termination, deskphone control uses the phone for media. Did you change the parameters during install for phone mode??? If not, it's not in phone mode.
A3: No, that can be many things, DNS, connectivity, credentials, etc
You mention DNS is not used, so, most likely that's the problem.
I'd strongly recommend you to review the whole deployment guide for Jabber for Windows.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Call/video not working between Cisco jabber for Windows and VCS control C40s

Hello,
I've been struggling with no luck how to make a call using Cisco Jabber for Windows 9.6.0 registered to CM 8.6.2 with intercluster ICT to another CM 8.6.2 where we have a VCS Control 7.0.2 via GK H225, and all C40s are registered as H.323.
The VCS has interworking between H323 and SIP, however not sure if there is any problem with that. Assuming it is ok, not sure either if I'm facing any interoperability issue because in my remote site I have C40 (H323 registered at VCS and SIP listening mode) and cisco jabber for windows which is SIP based.
If is not possible, would I be able to change my C40 from H323 to SIP at VCS, or have both H323/SIP registered at VCS? If so, will I need to change as well instead of GK I'll have to establish a SIP Trunk between the CM and VCS?
Another thing I do not believe either I would be able to have one VCS connected with two clusters, right?
I'm just trying to find a solution in case my current topology is not compatible, but feel free if you have any better idea to make it work.
Anyway here is what is happening:
When I make a call from my cisco jabber windows to C40 using alias number. The call is being redirected just fine to the C40 and it rings, however when someoene or the auto answer picks it up, the call dropped right away.
However, if I enabled the MTP in my CSF device, the call gets longer before dropping. I was even able to see my jabber " start video" turns green, before was grayed out all the time and the call dropped faster. I hear a fast busy tone.
I'm able to provide SDI traces, logs, diagnostic sip/h323 calls from VCS in order to know for sure if this is an incompatible issue or something I can workaround.
Let me know if someone of you are interested in read these logs or could point me on the right direction.
Thanks!

Ok,
I have looked at both logs. I have to mentinon though that you didnt
provide the log that shows the h323 setup between cucm and the VCS. This
is most likely because the call originated from a different cucm than
the ones you provided the logs from.
The call would have orginated from the first cucm in the cucm group of
this trunk: Name=RL_TRUNK_VIDEO
The cucm ip will be : 10.252.53.10.
This is the VCS log that confirms where the h323 request originated
from:
pr 10 22:50:29 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:29,187"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="54000"
Received RAS PDU:
Having said that here is my analysis of the logs that you sent..
Jabber sent an INVITE to CUCM and advertised all the codecs (audio and
video it can support)..
Observer that Jabber says it doesnt support G729 anexB
21:55:16.576 |//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message
from 10.223.20.73 on port 54677 index 90661 with 2220 bytes:
[862370,NET]
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/TCP 10.223.20.73:54677;branch=z9hG4bK000029d3
From: "4122107" <sip:[email protected]>;tag=00059a3c78000011000070b0
-00000e65
To: <sip:[email protected]>
Call-ID: [email protected]
Max-Forwards: 70
Date: Fri, 11 Apr 2014 01:55:16 GMT
CSeq: 101 INVITE
User-Agent: Cisco-CSF/9.4.1
m=audio 19252 RTP/AVP 0 8 18 105 104 101
c=IN IP4 10.223.20.73
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:105 G7221/16000
a=fmtp:105 bitrate=24000
a=rtpmap:104 G7221/16000
a=fmtp:104 bitrate=32000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 28878 RTP/AVP 97
c=IN IP4 10.223.20.73
++++Now lets observer the capabilites exchange during h245 negotiation
between cucm and VCS++++
Here CUCM advertises its caps to VCS (afterreceiving caps from VCS)
Note that G729A, G729AB, G729 is all advertised..
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,017"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : terminalCapabilitySet
capabilityTableEntryNumber 2,
       capability receiveAudioCapability :
g729wAnnexB : 6
       capabilityTableEntryNumber 3,
   capability receiveAudioCapability : g729AnnexAwAnnexB : 6
       capabilityTableEntryNumber 4,
       capability
receiveAudioCapability : g729 : 6
capabilityTableEntryNumber 5,
       capability receiveAudioCapability :
g729AnnexA : 6
++++++
After doing MSD (master slave determination, we move to the OLC phas e..
Here we see that the far end..c40 wants to use G729AB for media++++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,783"
Module="network.h323" Level="DEBUG": Src-ip="10.224.114.11" Src-
port="11163"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
+++Next VCS sends G729AB as the codec to use to CUCM+++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,784"
Module="network.h323" Level="DEBUG": Dst-ip="10.252.53.10" Dst-
port="45660"
Sending H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
++++The next thing we get is an OLC reject from CUCM and this is where
th call drops++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= response : openLogicalChannelReject :
forwardLogicalChannelNumber 1,
   cause dataTypeNotSupported : NULL
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="INFO": Dst-ip="10.224.114.11" Dst-
port="11163"
Detail="Sending H.245 OpenLogicalChannelRejResponse
+++We then receive a call release from cucm with cause code of 47:
resource unavailable++++
Apr 10 22:50:32 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:32,365"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="50913"
Received H.225 PDU:
Q931
   Message Type: Release
Complete
   Call reference flag: Message sent from originating side
Call reference value: 0x7b
   Info Element : Cause
     Location: Usr
   Cause Value: Resource unavailable
   Info Element : User User
   Length = 22
Suggestions:
Change the region setting between the ICT trunk to VCS and Jabber to use
G711 and test again.

Cisco Jabber for Telepresence 4.6.3 Setting for "Webex Telepresence" Cloud Service

Similar Messages

Maybe you are looking for