Cisco Jabber windows call option and user addition issue

Hi,
After uploading the jabber-config.xml (EDI-BDI) on the CUCM, the call option for new user contacts started appearing but the already existing contacts in Jabber client have still no call option. Also when we add new contacts to the Jabber client, it just disappears as such. Any one faced similar issue before. Below are the details and attached jabber-config.xml and LDAP profile snap.
We are using employeeNumber as attribute in LDAP configuration.
CUCM - 8.5.1.15900-4
UCCX - 8.6.3.10000-20
Jabber for windows - 9.7.0 (Tried with earlier version of jabber as well)

Hey
Just right click on the contacts which do not have the call option and select view profile, then see if those contacts that are added are they from the Outlook or the AD, if its AD then they will have a contact number and as such they will have the Call Option enabled.
If they are from outlook then delete the users and readd them by checking the view profile option to verify they are being pulled from AD.
Also if i assumed the issue differently then what it is please explain the whole scenario.
Note-: In case of J4W it will not connect to the directory using the LDAP profile info, it automatically verified and cnnects to the domain using your login creds.

Similar Messages

Cisco Unified WFO - Call Recording and Quality Management with Extension Mobility agents

Hi All,
We're considering Cisco Unified WFO - Call Recording and Quality Management for a customer running UCCX 8.0, agents on multiple WAN sites, all agents using extension mobility.
The documentation I've been able to find describes three different recording methods:
Using Desktop Recording service (Endpoint) to record from an agent’s desktop.
Server Recording - Uses SPAN (not so good for remote sites)
Network Recording - Uses CUCM recording service / SIP trunk / phone's built in bridge.
Network recording or Desktop recording should be suitable for the customer but it seems that Extension mobility is not supported. Extension Mobility is not mentioned in the 8.5 installation guide, it is mentioned as ‘not supported’ in the 8.0 guide as follows:
'Server Recording and Network Recording have the following limitations:
• Extension mobility is not supported.'
Neither version's documentation specifically mention extension mobility in relation to the desktop recording method, though I realise this is a similar approach to the 'server recording' method.
So the question I have is: Is extension mobility supported in any way on version 8.0, or version 8.5 for recording? And if so which recording method(s) are supported?
Thanks,
Jonathan

Hi,
I had more luck asking questions over at the Calabrio forum - they make the software and Cisco re-brand a version of it - there is some good info on their portal (http://portal.calabrio.com), you have to register but it's fairly painless. The answer I got was:
"QM Desktop recording has always supported extention mobility as it determines the recorded user by the desktop user's login. Extention mobility was not supported for Server and Network recording until the Calabrio QM 8.6.2 release in April 2011 and will be added to Cisco QM starting with QM 8.5.2 in June 2011"
Regards,
Jonathan

Differences between Cisco Jabber 9.2.6 and Cisco Jabber 9.7.1 for windows 7 PC?

It could cover the features or technical aspects of Cisco Jabber

Currently our users are using Cisco Jabber 9.2.6, while we are planning to move to 9.7.1...
Looking for a simplified way to explain the difference to the users.

CISCO Jabber 8.6.2 and CME 8.6

Hello,
I want to use Cisco Jabber 8.6.2 with Call manager Express 8.6
I configured the IPhone on CME and is working ok on local wireless LAN,
When I’m using the VPN I can place call's inside the network but I can't use on outside line. I have no sound.
Also if I place a call and the I end the call, the called phone rings and is not stopping. So I think is a call disconnect problem.
Bellow is a part of the configuration.
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
h323
call start slow
sip
session transport tcp
registrar server
voice class codec 1
codec preference 1 g729r8
voice class custom-cptone romania
dualtone busy
frequency 450
cadence 170 170
dualtone disconnect
frequency 450
cadence 170 170
voice register global
mode cme
source-address 10.12.4.252 port 5060
max-dn 10
max-pool 10
authenticate register
hold-alert
tftp-path flash:
create profile sync 0000545624458818
voice register dn 1
number 5146
call-forward b2bua all 5108
call-forward b2bua busy 5160
call-forward b2bua noan 5160 timeout 18
name Ioan Stanciu
shared-line
label Ioan
voice register pool 10
registration-timer max 720 min 660
id mac 68A8.6D91.3FE0
session-transport tcp
type CiscoMobile-iOS
number 1 dn 1
username 5146 password 5146
voice-port 0/0/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone romania
no battery-reversal
timeouts call-disconnect 2
timeouts wait-release 2
connection plar opx immediate 5150
caller-id enable
voice-port 0/0/1
supervisory disconnect dualtone mid-call
supervisory custom-cptone romania
no battery-reversal
timeouts call-disconnect 2
timeouts wait-release 2
connection plar opx immediate 5150
caller-id enable
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
codec g722-64
maximum sessions 1
associate application SCCP
dial-peer voice 2 pots
preference 2
destination-pattern 9T
incoming called-number .
direct-inward-dial
port 0/0/1
telephony-service
video
maximum bit-rate 256
no auto-reg-ephone
em logout 0:0 0:0 0:0
max-ephones 25
max-dn 120
ip source-address 10.12.4.252 port 2000
max-redirect 7
auto assign 1 to 8
service phone videoCapability 1
service phone paramEdibility 1
no service directed-pickup
timeouts interdigit 6
timeouts ringing 15
Any idea what can be the problem ?

Hello,
Is the connect over 3G enabled on your iPhone? Try this.
Btw, what have you put as device ID on your iPhone? the MAC address?
To my knowledge, the device ID is TCTXXX for CUCM, there is no info related on how to add it for CME 8.6
Regards

Windows 8.1 and ACPI Battery Issues

We have a Dell Inspiron 15R (model 5537), which came with Windows 8 factory installed. The machine worked perfectly, with no flaws. Then we upgraded it to Windows 8.1, and the began having problems with the battery. The system would work fine
for a while, it is primarily used as a desktop computer, with the AC power plugged in 80% of the time. Then we would notice the power icon change to indicate was running on battery, even though it was still plugged in. Unplugging it and plugging
it back in SOMETIMES solved the problem, at least for a few hours. We have seen various suggestions for solving this problem, including disabling the Microsoft ACPI Compliant Battery module. As it worked perfectly in Windows 8, we can only assume
that the problem lies in a fault ACPI driver in Windows 8.1. Is there any permanent solution to this, perhaps Microsoft is issuing an update to the ACPI Battery drivers?

We have a Dell Inspiron 15R (model 5537), which came with Windows 8 factory installed. The machine worked perfectly, with no flaws. Then we upgraded it to Windows 8.1, and the began having problems with the battery. The system would work fine
for a while, it is primarily used as a desktop computer, with the AC power plugged in 80% of the time. Then we would notice the power icon change to indicate was running on battery, even though it was still plugged in. Unplugging it and plugging
it back in SOMETIMES solved the problem, at least for a few hours. We have seen various suggestions for solving this problem, including disabling the Microsoft ACPI Compliant Battery module. As it worked perfectly in Windows 8, we can only assume
that the problem lies in a fault ACPI driver in Windows 8.1. Is there any permanent solution to this, perhaps Microsoft is issuing an update to the ACPI Battery drivers?

I've just installed Cisco Jabber 10.5.1 and I don't want the drop-down tab option showing at the top of my screen. It blocks tabs in the browser window and is simply in the way. Is there a way to remove or move this elsewhere?

Looking for a way to relocate the drop-down tab at the top of the screen. Is there a way to remove this or move it elsewhere? Any guidance is appreciated.

Thank you kindly. Not sure why I didn't see that - I had looked all over in the settings menu. Thanks for pointing me in the right direction!

Bug? Cisco Jabber Video for TelePresence and spanish keyboard

Hello everybody,
because of a customer request I checked Jabber Video with spanish keyboard configured (traditional sort) an figured out, that with this configuration the Jabber Client (tested with 4.2, 4.6 and 4.8.8) doesn't accept the pound key when it is pressed on the keyboard. In Word for example the pound key works as expected. At the moment I told the customer to use the "onboard" keyboard in the Jabber Video client, but I think it is a bug (don't know if it's a bug in Jabber Video or Windows 7). Has anyone experienced the same? Maybe this will be fixed in future?
Regards, Daniel

You can have both "free" and "enterprise" versions installed on a Mac.
If you already have "enterprise" version installed on a PC, and you install the "free" version, the registry settings will be changed and server setting locked to
https://sjc1-movi-pr-bootproxy-vip.ciscojabbervideo.com/endpoint/configuration
when you install the "free" version, so ,no, you can't have both versions installed on the same PC.
You can change the registry settings so it's not locked to the Cisco server, but then you might as well just have the "enterprise" version installed and just edit the internal server settings to use the above URL if you want to make it behave as the "free" version.
There's no difference, clientwise, between the two, the server settings determines which server it will register with, and provisioning settings will change accordingly.
/jens

How to use call back and user session id based conversation with web service in weblogic 6.1 sp2 ?????????

Hi, every one:
Here's my question of my day - >>>
I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K, and
I got a web service up and running called Price Update web service through
which user can pick up a price and push a deal to another web service
called: deal service, the deal service will take the user deal and book the
deal ( sending a JMS message to a Queue, a MD will pick up and do the work,
then send the confirmation to another JMS Queue ), then the confirmation
will be picked up and sent to another web service , called: User Deal
Confirmation Service, here's the question:
1. Since the client application is only allowed to see its own confirmed
deals, how I can make the confirmed deal encrypted based on a server
generated key or the session id that client application provides
2. Now, I have 3 webservices: update, deal and confirm, each of them has a
client.jar file available - from the client application point of view, do I
need all these 3 client.jar, or I just need one of them ?????
3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
beta, you can do this easily in the workshop, in the second question above,
I think I need some how relate the confirmation to the client conversation
id ??
thanks a lot for the input, have a nice day.
regards,
mark.

Any comments ?
mark
"markhu" <[email protected]> wrote in message
news:[email protected]..
Hi, every one:
Here's my question of my day - >>>
I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K,and
I got a web service up and running called Price Update web service through
which user can pick up a price and push a deal to another web service
called: deal service, the deal service will take the user deal and bookthe
deal ( sending a JMS message to a Queue, a MD will pick up and do thework,
then send the confirmation to another JMS Queue ), then the confirmation
will be picked up and sent to another web service , called: User Deal
Confirmation Service, here's the question:
1. Since the client application is only allowed to see its own confirmed
deals, how I can make the confirmed deal encrypted based on a server
generated key or the session id that client application provides
2. Now, I have 3 webservices: update, deal and confirm, each of them has a
client.jar file available - from the client application point of view, doI
need all these 3 client.jar, or I just need one of them ?????
3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
beta, you can do this easily in the workshop, in the second questionabove,
I think I need some how relate the confirmation to the client conversation
id ??
thanks a lot for the input, have a nice day.
regards,
mark.

Is it possible to keep Firefox open after all windows have closed (and to additionally open a new window when starting another Firefox process)?

Yes, yes, I know, it's not good to keep applications open when they aren't designed to be. I'm sure Firefox has some memory leaks and this is doing more harm than good, but...
My computer isn't the greatest out there, and to increase the usability of my Firefox browser it would be nice to keep the firefox.exe process open, even after closing all windows. I know Firefox doesn't totally close if there is at least one Firefox-related window open, but having to open X popup window seems a bit extreme to get this effect.
Additionally, to allow another window to be opened, it would be cool for the "OH NO FIREFOX IS STILL OPEN" prompts to be replaced with just attempting to open a new window, if this feature is enabled.
So, if it exists already, is there a config variable for it, and if it doesn't exist, is it possible to perform somehow? I'm not afraid to get my hands dirty if it comes to it; I'd really like to get this happening.
I'm running Windows 7 Home, if it matters. (I'd rather be running another OS, but this is neither the time nor place...)

LINK: https://addons.mozilla.org/en-US/firefox/addon/minimizetotray-revived/

Get Windows domain name and user through jsp

I have a jsp page that will be viewed through ie on windows platform, that is a member of domain.
I need to get the domain name and logged in windows user name to use it in my page.
I've looked through similar topics. Found no answer.
1.
System.parameter("user.name") is not ok. it returns user that runs jvm.
2.
import com.sun.security.auth.module.NTSystem;
NTSystem system = new NTSystem();
system.getDomain()
system.getName()that didn't work through jsp, though the answer is correct.
3. I found some api at http://www.sinotar.com/download/swin/doc/index.html
it did the right thing, but it's not free.
Could anyone advice me smth?
I've looked

well, it won't work in your jsp because jsps run server-side
could try putting an applet on your page that does it, but I wouldn't be surprised if the security manager put the kibosh on that, too
a third - but clunky - way would be to write a quick java app that does it, and launch it through WebStart. bit ugly, and needs extra user input they might not want to do

Cisco Unified WFO - Call Recording and Quality Management stops recording with conferenced translator

I'm having an issue whenever one of our employee's conferences in an external translator, as soon as they bridge the customer into the call with the translator QM stops recording. I can hear the intial conversation with the customer, and then the employee put the customer on hold and call the translator service. Only when the two are bridged together the call always stops recording.
We are performing all recording on the server side, and are not using Quality Manager Desktop agents.
Any help would be much appreciated. Thanks!
-Chris

So I found the following information listed below. I don't manage the Cisco Unified CM portion of our telco system. Can we limited the ourselves to a single Codec, and would this even resolve the issue. Does this cause other issues if we didn't limit the devices that are recording to a single codec?
Recording IssuesThis topic explains how to diagnose and resolve problems that occur with contact
recordings.
Calls for devices configured for Network Recording drop when you try to conference
or transfer a call.
Symptom. When you try to transfer or conference a call and one or more devices on
the call configured for network recording, the transfer or conference fails and
parties drop off of the call.
Cause. Cisco Unified CM does not support codec changes for devices that are
configured for call recording. The codec must remain the same throughout the life
of the call. For conference calls, the conference bridge must support the codec
used before the conference completes.
Solution. Update the Cisco Unified CM configuration to ensure that no codec
changes occur for network recorded devices.

How to use User Options and User-Defined Fields in DC Group function?

Dears,
As title, when should I use above fields? I did not see the related information in SAPME help library.
Thanks!

The user options fields are just information fields you can store at the Data Collection Maintenance activity. You can think of these as extra information fields for storage purposes only. I can't give you a use case except to say 'information fields' only.
With regards to the User-Defined fields in DC Group - you can think of these as extra data fields to be collected. They will appear immediately underneath the data parameter they are defined in in the DC Plug-in for the POD. They do not have limits but are just extra pieces of data you may want to collect about the specific parameter.

Windows 7 DNS and Group Policy Issues

Hi,
We have several suites of Windows 7 domain connected PC's.
In one of the suites I have been called into look at 3 different PC's where the users have not got mapped drives, desktop backgrounds, internet connectivity - because their group policies have not applied.
When I look at the error logs I find DNS 1014 errors, and Group Policy 1054 errors.
I have looked at the logs on the switches, and there is nothing on them - Could a pupil pulling the network cable out cause these errors?... Possibly they could have put it back in before I got back in the room.
The user logs off of the PC and back on again and are fine, as are the users that logon after them.
We have 2 DC's/DNS servers, which I would have thought would be able to cope with the load here.
Please let me know what you think the likely cause could be.

Hello John555444,
What is your current situation?
Is this issue resolved?
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

SQL: GROUP BY and UNION addition issue..

I'm looking to to get the TOTALS of the grouping. What I'm getting now is either a 1 or a 2 whether or not each PRIMARY_ASSIGMENT_GROUP appears in each query. when I run the
SELECT a.PRIMARY_ASSIGNMENT_GROUP,GROUP(a.PRIMARY_ASSIGNMENT_GROUP) from
SELECT
COUNT(PRIMARY_ASSIGNMENT_GROUP),PRIMARY_ASSIGNMENT_GROUP
from
SMINCREQ
LEFT JOIN SMOPERATOR on SMINCREQ.OPENED_BY=SMOPERATOR.NAME
WHERE
open_time BETWEEN to_date(:P246_SDATEB,'DD-MON-YYYY') AND to_date(:P246_EDATEB,'DD-MON-YYYY') and
((to_char(CAST((FROM_TZ(CAST(open_time AS TIMESTAMP),'+00:00') AT TIME ZONE 'US/Eastern') AS DATE),'HH24') between '00' and '08') or (to_char(CAST((FROM_TZ(CAST(open_time AS TIMESTAMP),'+00:00') AT TIME ZONE 'US/Eastern') AS DATE),'HH24') between '19' and '24')) GROUP BY PRIMARY_ASSIGNMENT_GROUP
UNION ALL
SELECT
COUNT(PRIMARY_ASSIGNMENT_GROUP),PRIMARY_ASSIGNMENT_GROUP
from SMINTERACTIONS
WHERE
open_time BETWEEN to_date(:P246_SDATEB,'DD-MON-YYYY') AND to_date(:P246_EDATEB,'DD-MON-YYYY') and
((to_char(CAST((FROM_TZ(CAST(open_time AS TIMESTAMP),'+00:00') AT TIME ZONE 'US/Eastern') AS DATE),'HH24') between '00' and '08') or (to_char(CAST((FROM_TZ(CAST(open_time AS TIMESTAMP),'+00:00') AT TIME ZONE 'US/Eastern') AS DATE),'HH24') between '19' and '24')) GROUP BY PRIMARY_ASSIGNMENT_GROUP
) a
GROUP BY (a.PRIMARY_ASSIGNMENT_GROUP)
ORDER by COUNT(a.PRIMARY_ASSIGNMENT_GROUP)

bostonmacosx wrote:
I'm looking to to get the TOTALS of the grouping. What I'm getting now is either a 1 or a 2 whether or not each PRIMARY_ASSIGMENT_GROUP appears in each query. when I run the
SELECT a.PRIMARY_ASSIGNMENT_GROUP,GROUP(a.PRIMARY_ASSIGNMENT_GROUP) from
SELECT
COUNT(PRIMARY_ASSIGNMENT_GROUP),PRIMARY_ASSIGNMENT_GROUP
from
SMINCREQ
LEFT JOIN SMOPERATOR on SMINCREQ.OPENED_BY=SMOPERATOR.NAME
WHERE
open_time BETWEEN to_date(:P246_SDATEB,'DD-MON-YYYY') AND to_date(:P246_EDATEB,'DD-MON-YYYY') and
((to_char(CAST((FROM_TZ(CAST(open_time AS TIMESTAMP),'+00:00') AT TIME ZONE 'US/Eastern') AS DATE),'HH24') between '00' and '08') or (to_char(CAST((FROM_TZ(CAST(open_time AS TIMESTAMP),'+00:00') AT TIME ZONE 'US/Eastern') AS DATE),'HH24') between '19' and '24')) GROUP BY PRIMARY_ASSIGNMENT_GROUP
UNION ALL
SELECT
COUNT(PRIMARY_ASSIGNMENT_GROUP),PRIMARY_ASSIGNMENT_GROUP
from SMINTERACTIONS
WHERE
open_time BETWEEN to_date(:P246_SDATEB,'DD-MON-YYYY') AND to_date(:P246_EDATEB,'DD-MON-YYYY') and
((to_char(CAST((FROM_TZ(CAST(open_time AS TIMESTAMP),'+00:00') AT TIME ZONE 'US/Eastern') AS DATE),'HH24') between '00' and '08') or (to_char(CAST((FROM_TZ(CAST(open_time AS TIMESTAMP),'+00:00') AT TIME ZONE 'US/Eastern') AS DATE),'HH24') between '19' and '24')) GROUP BY PRIMARY_ASSIGNMENT_GROUP
) a
GROUP BY (a.PRIMARY_ASSIGNMENT_GROUP)
ORDER by COUNT(a.PRIMARY_ASSIGNMENT_GROUP)Instead of using UNION ALL you should be able to get by with GROUPING SETS or ROLLUP.
If you'd care to put together a small test case with data (representing what you have) and some sample output (what you need) along with your Oracle version
select * from v$versionI'm sure someone will help you out.
Cheers,

HT204053 someone hacked and changed my APPLE ID about a month ago, but after calling support and fixing this issue, I'm still having problems with my iCloud account as it is still trying to use the hacked account

Is there someon in support who can help me match these up again? The hackers just took my account email name and added a number "1" to it and now I can't access icloud!

The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.

Cisco Jabber windows call option and user addition issue

Similar Messages

Maybe you are looking for