Cisco LAN Management Solution is required to support Cisco Nexus 5548P and 5596UP switches?

Hi,
Could someone help to know what Cisco LAN Management Solution is required to support Cisco Nexus 5548P switches and Cisco Nexus 5596UP switches?
These new Cisco switches are being implementing on customer network and he ask us that he requires these equipments be supported on a LMS solution (customer currently is using LMS 3.2.1)
Can someone help?
Thanks in advanced,
guruiz

Some very limited Nexus support is present in LMS 3.2.1 - see the supported device table here.
To get more complete support, including the 5596UP, they need to upgrade to LMS 4.x (e.g. LMS 4.2.2 is the latest and is sold under the Cisco Prime Infrastructure 1.2 umbrella). The major upgrade from 3.x to 4.x requires purchasing an upgrade license.
Some functions (namely User Tracking ) will not be available on the 5k due to non-support of the requisite MIB on the device. I believe LMS still doesn't let you do VLAN management on 5k's - you need to use DCNM for that if you want to do it from a GUI.
See the table here for LMS 4.2 device support.

Similar Messages

Hi Team, I wuold like to know if you have any app to make Firefox OS working with cisco Call Manager 10.5. Something like Cisco Jabber for Android or iOS.

I'm interesting on buying a Firefox Smart Phone, but
I would like to know if are any app to install on Firefox OS smart phone in order to work with cisco call manager 10.5.
Something like Cisco Jabber for Android o iOS.
Thanks,

Hi Itech,
If Cisco Jabber has a webapp, or mobile version of their website available, you should technically be able to access it through Firefox OS.
You may also search Firefox Marketplace for an alternative solution:
* [https://marketplace.firefox.com/]
- Ralph

Cisco Network Management Solution

Hi,
I was asked to put together a Network Management solution to manage multiple sites. The sites are as follows:
Site 1 - Approx 30 Switches (Cisco 4507 Core / Cisco 3750X Access)
Site 2 - Approx 50 Switches (Cisco 4507 Core / Cisco 3750X Access)
Site 3 - Approx 40 Switches (Cisco 4507 Core / Cisco 3750X Access)
Site 4 - Approx 40 Switches (Cisco 4507 Core / Cisco 3750X Access)
Site 5 - Approx 50 Switches (Cisco 4507 Core / Cisco 3750X Access)
The sites are connected over a 2 or 4Mbps WAN connection to a central site.
Can you please advise on the following:
1) Architecture - Centralized or Distributed?
2) Cisco Prime Infrastructure 1.2? or is there anything else?
Thanks,
Z

You need to define what functions you want before selecting tools.
Event management (syslog, SNMP traps).
Network Change and Configuration Management (NCCM), which includes network discovery, inventory, as well as config mgmt.
Performance data collection, analysis, and alerting.
IP Address management.
Topology mapping.
Active path testing.
Application performance management.
Once you know what functions you want to implement, you can start identifying products that fulfill those requirements.
There is more info in my blogs about network management architecture:
http://www.netcraftsmen.net/resources/blogs/a-network-management-architecture-part-1.html
http://www.netcraftsmen.net/resources/blogs/a-network-management-architecture-part-2.html
http://www.netcraftsmen.net/resources/blogs/a-network-management-architecture-part-3.html
http://www.netcraftsmen.net/resources/blogs/a-network-management-architecture-part-4.html
-Terry

Cisco Prime LAN Management Solution - List of manageble devices

Is there a list of devices that is current list of devices that Cisco Prime is able to manage (ie: configuration files, images, health and status, etc)?
I more specifically need to know if Prime manages IPS-4200 series, As one of my requirments is to back up configuration, images, signature files and ideally from one repository as the rest of the Cisco router/switching devices.
thanks in advace!
-OZ

Hi Oscar,
Here is the list of devices information supported by Prime. Select the version of PI you are running & see
http://www.cisco.com/en/US/products/ps12239/products_device_support_tables_list.html
If that answer your query pls mark this thread as answered.
HTH
Rasika
**** Pls rate all useful responses ****

SCP issue in Cisco Prime LAN Management Solution 4.2.5

Hi guys,
I am trying to solve the following issue for the failed scheduled jog using SCP:
                           JOB ID - 7431 SUMMARY
Device Name : xxxxxxx
Software upgrade result - Failed
Total number of devices scheduled for upgrade : 1
Number of devices upgraded : 0
Number of devices failed : 1
Total time taken for Job - 3 Minutes 20 Seconds
Status of Job - FAILED
Starting Job: ID - 7431
Job Started At : Mon Dec 15 12:20:09 EST 2014
Job running on : xxxxxxxxx
Upgrade Mode : Parallel
Reboot Mode : Parallel
Protocol Order for Image Transfer : SCP
Protocol Order for Config-operations : SSH,TFTP,HTTPS,TELNET,SCP
Total number of device(s) to be processed : 1
Processing Device : xxxxxxx
Start Time : Mon Dec 15 12:21:20 EST 2014
Device is locked for exclusive access.
The supported protocols for image transfer are: SCP
Connecting to the device using SSH...
Connected successfully.
Retrieving configuration file from the device...
Current device config is copied to /var/adm/CSCOpx/files/rme/jobs/swim/7431/xxxxxxxx
Checking if HTTP server is enabled on the device...
Http Server is not enabled, will continue with Software Upgrade Operation.
Copying cat3k_caa-universalk9.SPA.03.03.05.SE.150-1.EZ5.bin from Software Repository to scp-specific directory.
Copied successfully to /tmp/rep_sw_9212002925209712419
Loading image file to flash device : rep_sw_9212002925209712419 --> flash:cat3k_caa-universalk9.SPA.03.03.05.SE.150-1.EZ5.bin using SCP
Image Copy Operation Failed
Device is unlocked.
Device Upgrade Result : Failed
End Time:Mon Dec 15 12:22:56 EST 2014
Job Ended At : Mon Dec 15 12:23:30 EST 2014
I noticed this post https://supportforums.cisco.com/discussion/11715076/lms-422-software-distribution-task-fails-upgrade-3750-image and tried to get the customer to try the following:
Solution:
      Timeout needs to be increased for a device or entire device type group from Admin > Collection Settings > Inventory > Edit the Inventory/Config Timeout and Retry Settings
          ReadDelay – 200ms
          Telnet Timeout – 800s(This timeout is applicable for both TELNET and SSH)
And the customer was able to do run the scheduled job after changing the time settings with TFTP, not with SCP. Any ideas about the reason that SCP does not work? Any additional configuration needs to be done from the switch side?
Thanks in advance,

Hi guys,
Any ideas on this?

Install cisco security manager

Good morning:
I adquire a CSM license and need install, only have one server and this is installed LMS 3.2.
Follow the installation instructions, i found that this CSM can't be installed in the same server that LMS.
This is the paragraph:
"We do not support the coexistence of Security Manager with any third-party software or other Cisco software (including any CiscoWorks-branded âsolutionâ or âbundle,â such as the LAN Management Solution [LMS] or the VPN/Security Management Solution [VMS]), unless we state explicitly otherwise in this guide or at http://www.cisco.com/go/csmanager
Someone can tell me if this is definitive or can install both in the same server.
Thank's in advanced

Yes both cannot be installed on the same server. Even if you manage it by some 'fancy' trick, it won't be supported by Cisco TAC. If you have only one physical server available, consider VMWARE. Regards
Farrukh

Designing Cisco Video conferencing solution

Hi All,
I need to design a single site Cisco IP Video Conferencing soultion which should support web, chat, ISDN and email etc support.
there will be one conferencing room which will be communicating with other remote or traving users.
the requirement is that remote or travelling users should be able to have the video conferencing facility with the Headoffice(single site) and vise versa.
Any help will be much appreciated.
Regards,
Waqas

I would recommend Cisco unified presence server for your deployment with MPX. That will give you chat, voice and video conferencing. If you dont use MPX then you can only do point-to-point video CUPS on its own doesnt support video conferencing.
YOu can also intergrate with exchange to view meetings and unity to listen to voicemails.
You can use VTA for the remote clients and 7985 for central site or some sort of tanberg phone if you want a larger screen.
The remote users are going to have to have a pretty low latency connection to get good quality video/voice.
HTH
Matt

Catalyst 3750x and 4510R and Cisco Security Manager

Hi,
I just downloaded and install trial (evaluation) version of Cisco Security Manager 4.3. In supported devices list I saw Cisco Catalyst 3750 and 4510R but when I try to add it I got for 3750:
Invalid device: Device is a switch and cannot be mapped to a Generic Router model.
Please verify the selected device type, OS version and device configuration
For 4510R:
Invalid device: Version 03.03.00.SG (N/A) is not supported for the device type of Cisco Catalyst 4510R Switch Please verify the selected device type, OS version and device configuration
We need to make a purchase decision but for it we need to import all of our devices and perform some tests.
Thanks in advance for your replies!
BR, Vasily.

I figured this out on my own -- change Compatibility mode of the installer to be Windows 8 (which is same OS version as Windows 2012) and it installs just fine.

Cisco Security Manager Advice

Hi,
I'm looking into Cisco Security Manager. From what I understand you can monitor and manage Cisco security appliances. I'm interested in the monitoring of our Cisco ASAs - specifically, monitoring VPN sessions and their trending over months at a time and I would like to monitor other Cisco devices on the network for link problems/performance and such - I don't want to use Cisco Security Manager as a management point. Would Cisco Security Manager not be the right tool for this?
We have SolarWinds and I've heard that you can assign UnDPs(Device Pollers) to devices you want to monitor, including ASAs and these pollers can give you trending for VPN sessions with graphing. I just want to make the most of our budget dollars.
Any advice?
Thanks, Pat.

CSM 4.3 and above can be used to monitor VPN sessions on Cisco ASAs. You can definitely use CSM as a monitoring only solution for ASAs (without using it for management). You can also explicitly disable policy change privileges for all admins so they do not modify stuff by mistake. Note however that CSM is primarily focused on end-to-end management scenarios (including policy change, troubleshooting, reporting, etc). So you may not find all the bells and whistles in CSM for monitoring scenarios that you may find with some of the pure monitoring only solutions.

Cisco IOS 12.2 (50) SE2 Netflow support

hi to everyboby,
I'm trying to understand if the IOS version "Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(50)SE2, RELEASE SOFTWARE (fc2)" supports the netflow feature.
I'm trying to configure the cisco WS-C3750G-12S for sending netflow datagrams but I don't find the commands like "ip flow-export".
This cisco official document says that the commands for enabling netflow are not supported.
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_35_se/configuration/guide/swuncli.html#wp1060525
Is It true or I'm missing something?
Thank you very much!
giorgio

No, Netflow is not support on the Cat2K and Cat3K switches. See http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6555/ps6601/prod_white_paper0900aecd80406232.html .

Cisco Call Manager free license for training purpose.

I am going to setup a Cisco IP-Telephoney lab & looking for Cisco Call Manager free software license (What is Cisco has authorized for this purpose).
Is there any available?
Please help me.

Duplicate thread of
https://supportforums.cisco.com/thread/2181741
Do not SPAM the forums.

Cisco Security Manager Local RBAC Authentication Radius assign user role

Is it possible to use Cisco Security Manager with local RBAC, authenticate the user to Radius and retrieve it's role from Radius. Getting the authentication to work isn't the problem, but is it also possible to return the role the user has (i.e. Super Admin) via Radius, without having to create all the users one-by-one in the local CSM database with the correct role.
Can i use a certain Cisco-AV-Pair attribute to return the user role via Radius?

I just got asked to look at the same situation by one of our security people.
We have exactly the same problem but it reports a username of "*****" and we are running CSM 4.7 (upgraded last week)

Ask the Experts: Single Sign-On with Cisco WebEx Meetings Server, Internet Reverse Proxy, and Enterprise License Manager Solutions

With Arun Kumar
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Single Sign-On (SSO) with Cisco WebEx Meetings Server (Cisco WMS), Internet Reverse Proxy (IRP), and Enterprise License Manager (ELM) solutions.
SSO standards such as Security Assertion Markup Language (SAML) 2.0 provide secure mechanisms for passing credentials and related information between different websites that have their own authorization and authentication systems. SSO enables simplified user authentication and management.
IRP provides public access, enabling users to host or attend meetings from the Internet and mobile devices. Although IRP is optional, Cisco encourages its use because it provides a better user experience for your mobile workforce.
Example question topics include:
SSO profiles and SAML 2.0 Identity providers (IdPs) supported in Cisco WMS
Basic configuration of IdPs
Interaction between IdPs and Cisco WMS
Difference between the cloud client implementation and Cisco WMS
Meeting access behavior in a split-horizon network topology with SSO
How to enable public access to Cisco WMS
Cisco WMS ELM operations
Cisco WMS ELM compared to other unified communications ELM or standalone ELM and compatibility/inoperability between them
Arun Kumar is a team lead in the San Jose Conferencing Technical Assistance Center. He has over eight years of experience in conferencing technology and specializes in Cisco Unified Meeting Place Express and Cisco WebEx Meeting Server. He joined Cisco in 2010 as an escalation engineer for the Cisco Telepresence group. Before joining Cisco he worked for the UK's third-largest internet service provider Supanet on VoIP technology and the *Nix domain. Kumar holds a master of science degree in computer science from Sikkim Manipal University in India, and he holds CCIE (Voice) and VMware Certified Professional certifications.
Remember to use the rating system to let Arun know if you have received an adequate response.
Arun might not be able to answer each question because of the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice, and Video community Other Subjects subcommunity shortly after the event. This event lasts through Monday May 17, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Mobile Service,
CWMS and Jabber integrations:
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_1/JABW_BK_E4CC9599_00_environment-configuration-guide_chapter_01.html#JABW_TK_SF2ED5E1_00
In above link start from section: Set Up Cisco WebEx Meetings Server on Cisco Unified Presence
then move to section: Add Cisco WebEx Meetings Server to a Profile
Once done, move to section: Specify Conferencing Credentials in the Client side. You will see above server already listed there, just go ahead and enter your username and password (pleae make sure this user already exists on your CWMS) and accept any certificate/s if presented. Jabber Integration is done and you can start testing the same.
Attached CWMS - AFDS integration doc.
Please let me know if any furhter question.
Thanks, Arun

Manage a Cisco Secure ACS Solution Engine?

Hello,
how can i manage/observe a 'Cisco Secure ACS Solution Engine'? Ich found no things like SNMP etc.
regards
Karsten

Hi,
you have no chance to control the ACS SE with snmp. We have one router, access via ACS and uses a script roboter to control the access to the router. If the access fails, we send us an email
Bye Michael

Cisco Multicast Manager Support for NEXUS

Hi All,
Does Cisco Multicast manager support Nexus devices ?
Please help.

No at this time it does not according to the data sheets:
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6335/ps6337/q_a_c67-527951.html
You can use cisco data center manager for managing Nexus devices:
http://www.cisco.com/en/US/products/ps9369/index.html
Download software:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281722751

Cisco LAN Management Solution is required to support Cisco Nexus 5548P and 5596UP switches?

Similar Messages

Maybe you are looking for