Cisco Linksys Routers and Apple Products?

I have to seriously ask if there is simply an incompatibility between Cisco Linksys and Apple products?
I have both the WRT600N and the new E3000. Both are exhibiting the same behavior with my Apple products.
On the wireless connection, I am unable to get a download rate from the Internet, higher then maybe 1.2 - 1.5Mbps. Most of the time it is far lower. I am always using the same site for testing. www.speedtest.net and I always use the same testing server for Dallas, TX.
My ISP is Clear, and when going to www.speedtest.net while using the wired connection on my MacBook Pro, I get a download speed of between 5.5 and 8.2 Mbps.
The upload speed is not changed whether I am using the wired or wireless connection. I also notice the severe difference in speed when I use the Wi-Fi on my iPhone. My 3G connection is faster then the Wi-Fi...
So, is there an advanced config for the wireless that makes it behave better with Apple devices?
I have locked the config so far to 802.11g on the 2.4Ghz transceiver and 802.11n on the 5Ghz receiver. I have also set it not to broadcast the BSSID for either as I live in an apartment complex and I do not want to advertise my network to everyone else. I use WPA personal on the 802.11g network and WPA2 Personal on the 802.11n network.
The settings on the advanced wireless screen in the router config for my E3000 are the defaults.
I have tried nearly everything I can think of. I am now beseeching the help of the community at large in the hopes of gleaning some information that I did not already have. Also I hate the new Cisco Connect app.
On a side note, I was very disappointed to learn that while the WRT600N supported IPv6, the E3000 does not. As a result it seems my wired connection on the MacBook Pro is not performing as well as it did on the WRT600N.
If anyone from Cisco see's this, PLEASE re-add support for IPv6 to your routers. It makes no sense to move backwards now.

Which band you are using to connect the wireless computer...?
Is your other computers are working fine...?
If you are using 5GHz on the router to connect your Mac computer then,make sure the wireless adapter does support 5GHz.
Try the following settings...
Keep the Network Mode as "Mixed".For 2.4GHz...Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz..For 5GHz...Set the Radio Band to Wide-40MHz and change the Wide channel to159 and Standard Channel to 161-5.805GHz.Click on Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now,power cycle the router and check.

Similar Messages

Cisco Linksys E4200v1 and RV180

Good evening,
I currently have one Cisco Linksys E4200 v1, and at this point, I am very happy with it. It can do 450Mbps of WIFI 5Ghz and all ports are GiB.
But since it does not support VPN termination at least with the official firmware, I'm currently considering the acquisition of a RV180.
The E4200 will work only as access point.
My main concern are the several complains about this and that. I remember again that my E4200 is working like a charm. So I'm in a rough position to decide whether or not to buy the RV180.
Can you guys please pinpoint what is missing or not working in the RV180 please?
My Best Regards
Safekali

Hello Ricardo,
I'd say the biggest thing I've been hearing going around is the port forwarding issue. Currently there is a issue going on were port forwarding does not work and it could be with just PPPoE connections though? I know I've gotten port forwarding to work when set to either DHCP/Static on the wan side but there is a beta firmware out currently for this issue just don't know a ETA when a offical release will be out.
Also i think there is a issue with the NAT throughput were it gets really slow when you enable WAN QoS. You may want to search around the forums though to see if this is true.
Other than that I would check out the release notes on known issue they are experiencing with the current release.
http://www.cisco.com/en/US/docs/routers/csbr/rv180w/release_notes/rv180w_rn_1-0-1-9.pdf
What are your end goals with this device though? I assuming you are wanting to use it for VPN. I'd say most of the issue that people are reporting will be fixed in firmware releases. The actually hardware of the unit is very good but the software still needs a little work at this point. I own the wireless version of this model and I really like it.
Hope that helps you out some!
Thanks,
Clayton SIll

Windows 8 and Apple product compatibility

Good Morning,
The other day, I went to purchase a new Windows-based computer at a non-Apple retail store. I would purchase a Macbook, but budget limitations. When I asked what Windows computer would be best for basic usage (managing IPOD, managing IPADs, managing music, and basic computing), I was told that Windows 8 is not compatible with Apple products. The retail personnel said that he had numerous returns of products because their Iproducts were not syncing (in fact he returned his computer). I have researched the communities and found that there are numerous solutions and reasons for the problem, but the variation in the answers leads me to think that the core issue has not been addressed.
Question:
1. Has the compatibility issues between Windows 8 and Iproducts been corrected? If not, is there any news of the compatibility being addressed in a future release?
2. What is the exact problem and how can it be corrected if I do purchase a new Windows computer?
Thanks,
Brian

Hi urbwebb,
Welcome to the Apple Support Communities!
iTunes is compatible with Windows 8 and you should have no issue syncing any device to a Windows 8 computer. The Windows System Requirements can be found on the following webpage.
Apple - iTunes - Download iTunes Now
https://www.apple.com/itunes/download/
I hope this helps,
-Joe

Cisco-Linksys Router and no PPPOA Option for Conne...

Hi all!
New here and just hoping to get some here!
We are using a BT Business hub Router and it is having a few issues with wireless connectivity, so I would like to use another router to see if it is our equipment or if it is the router itself.
I have a Cisco Linksys E1000 Router and after looking at the BT router I can see that the connection type is set to PPPOA with a username and password. I do know the username and password so that isnt an issue, however on the Cisco router there is no option for PPPOA, the only options are:
Static IP, DHCP, PPPoE, PPTP, L2TP, and BigPond
There is a connection in the back of the cisco router for the ADSL cable, I was just wondering if there is a way to work around this?
Thanks very much!!

I am sure you will get help there when someone has time.
You can always find the latest postings on the Business Forum using this link.
http://business.forums.bt.com/t5/forums/recentpostspage/post-type/message
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Cisco/Linksys E2000 and gigabit connectivity

I've got a pppoe dsl connection running through a thompson speedtouch. I'm running the 1.0.03 firmware and I've discovered a pretty brutal issue with the e2000 regarding gigabit connectivity
When I switch my network adapter to 10 or 100Mbit full duplex, it connects to the internet fine, but when I switch the adapter to 1.0Gb full duplex, I suddenly lose all internet access. not just web connectivity, but email connectivity and anything else to do with WAN traffic.
Other computers here have the capability of running gigabit but I've also had to switch them to 100Mbit just so they have any kind of internet access aswell.
Will this be fixed?

I also have an issie regarding this. I have cascaded E3000 routers and ther port cooentions have blue lights which is just at 100mb when in fact they should talk to each at Gb speedmand have yellow port lights. Is this correct?

Problems with A/V chat, Cisco 2600 routers and more...

Don't really know where to start...
First some error messages:
2005-11-17 12:38:03 +0300: AA AA did not respond.
Tried to send UDP SIP-«invite» to the following IP-addresses and ports:
172.XX.X.X:1118
2005-11-17 13:33:37 +0300: AA AA svarte ikke.
Tried to send UDP SIP-«invite» to the following IP-addresses and ports:
172.XX.X.X:1308
2005-11-18 08:25:22 +0300: BB BB did not respond.
Tried to send UDP SIP-«invite» to the following IP-addresses and ports:
66.XXX.XXX.XXX:61437, 192.168.100.3:5060
I live in rural Tanzania and are trying to help out the local ISP to get AIM/iChat to work properly.
I've made a picture to illustrate the system, found at:
http://homepage.mac.com/nummelin/musoma/PhotoAlbum34.html
I can text chat without any problem.
Cases:
1.) I've had luck in calling up user CC CC within the local ISP using iChat but he failes to call me up. (Not sure if he was succesful in turning off his MAC's firewall.)
2.) The PC (AA AA) in Fig. 1 (found at the link above) have had some success in connecting to me with AV using the AIM client. He's getting the status that we're connected and he can see his picture but my picture is not showing at his end and I just get the message that he didn't respond.
3.) With BB BB I have had no luck with anything except with text messages and file transfers. (Which also seem to be working as it should with all clients.)
4.) Connecting with home (Europe) and the US haven't been a problem, but I've noticed somtimes that I can't invite but the other way around works.
Sumary: Using iChat/AIM A/V within my ISP's net is not working, A/V with users outside of my ISP is working.
Settings:
The Firewall setting of my router can be seen at fig. 2 (same link as earlier.)
All Firewalls have been turned off on all computers (except CC CC where I don't know the status.) when trying to connect with AV.
So, is the problem the cisco routers...?
If so, how to change/check the settings/open up the correct ports?
My ISP have pretty good knowledge of Linux and are of course working with the Cisco router but is not very experienced with it.
The ISP is using NAT, must admit I don't really get what that is.
Anyone experienced Cisco users around here?
Any tips/hints here will be much appritiated.
I'm just a geek who likes how's, why's and because's...
Kwa heri na asante sana!

Used a little different setup today. You can see it here . (Fig.3)
I did some experimenting using Trillian and AIM on the PC with the following results:
iChat-Trillian
Mac-> Pc Video Chat yes
Pc->Mac Video Chat no
Mac->Pc Tlf. Yes
Pc->Mac Tlf. No
Mac-> Pc File transf. Yes
Pc->Mac File tranesf. Yes
Mac->Pc Direct connect yes
Pc->Mac Direct connect kind of...the picture never shows, just the path on the client it was sent from, like c:/desktop/mysecrets/microcraft.jpg
iChat-AIM
Mac-> Pc Video Chat An unknown error occurred
Pc->Mac Video Chat Yes {AOL} is shown
Mac->Pc Tlf. n/a
Pc->Mac Tlf. n/a
Mac-> Pc File transf. yes
Pc->Mac File transf. yes
Mac->Pc Direct connect yes
Pc->Mac Direct connect yes
Trillian is behaving in a similar way from my experiences with other macs. I'll have to try that too of course. What's strange here is how different the PC clients are working. I've also tried switching the IP's on the machines with the exact same results. Is the software the actual problem? I'll just have to get that other mac to find out...arghh, too tired right now Zzzzzzzzz.....
If the service to me is NATed? Yes
and the rest... Well the ISP is convinced that it is the Cisco routers, but having their mail server hacked they are (still) busy figuring that out...

Intel i5, i7 recall and Apple products

Intel is recalling i5 and i7 systems that use "Sandy Bridge" technology. Does this affect current Apple Intel-based products?

Yes. Same is true. Apple use X58 chipsets in the Mac Pros. Sandy Bridge for Xeon's have not even had a prelim release and wont be available till Q3-Q4. All your Mac's are fine.

Problems with my router cisco linksys wrt110 and my android cellphone and android table

i updated my router from 1.0 to 1.07 and one week later my phone and my tablet both with android 2.3(phone) 4.0(tablet) connect to the router wireless but don't navigate internet, they connect to google.com sometimes and if i do a search it bring it but if i try to open any of the search it doesn't open. and they connect to google play but doesn't download any app. if i open any app that needs to connect to internet it doesn't connect either. My wife has a blackberry phone and she doesn't have problem with internet connecting to the wifi router, i have a pc with windows 7 and connect wireless too and either connect to internet without problems. It's only happen with android. i download terminal app and i ping different web pages and respond by name and by ip but when i go to internet app and try to connect it doesn't bring the page. i don't have firewall and the firewall of the router i disble it but the problem persist.
i factory reset the router and my phone but problem persist. i set static ip and nothing. my cellphone and tablet connect to internet fine in others wifi routers. What else can i do? should i downgraded the firmware to the router? if it is so where can i download a previous version of the firmware and what are the steps to install it?

If the other wireless devices are working fine connected to the router, then it might be that the Android phones and tablet needed to be configured properly. Had you tried to use another web browser on the problem phone and tablet to further isolate the issue? Had you tried to connect the phone and tablet to other wireless network and check if you still have the same issue? Please try to make sure that you are connected to the router’s main wireless network. And please try to delete preferred wireless networks, including your wireless network, on the phone and then try to reconnect.
Check this link for your reference:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=ac433a5ab0944f4e9f43338a8dd32465_Removing_a_networ...

Defective earbuds and Apple Product Service

I bought an iPod about 10 days ago and there is already crackling in the right earbud. Has this happened to anyone so quickly? I admit-some of the music gets cranked, but not for an extended amount of time & I don't use the Bass Booster from EQ when I do.
The real problem I guess is that I don't have a credit card and the website requires one or it won't process the repair order. Anyone have any luck getting Apple to replace defective earbuds without having a CC?
Dell Windows XP 30G U2 Special Edition iPod

Yep. I get this message:
Important: You must return your defective part to
Apple. When you receive your replacement part,
please check your box or envelope for return shipping
instructions. If you do not return the defective part,
we will charge a non-return penalty to your credit card.
I agree to pay USD 19.00 if I do not return my defective part to Apple within 10 business days

Lightroom between Windows and Apple products

I have a new windows 8 desktop that I have been using for Lightroom 4 work and now I want to get a laptop and am considering the Apple but wanted to know the following:
-Can I use the same Lightroom on both my desktop and laptop?
-If i get a Apple laptop will I be able to transfer work between the two that I do in Lightroom?
-I i go this route will i have any compatibility issues that will affect performance?
Your comments are appreciated!
Jakher1927

jakher1927 wrote:
-I i go this route will i have any compatibility issues that will affect performance?
Performance? Nope...but there are some issues relating to certain areas of compatibilities...for example; hard drives. On Mac you can mount and read/write FAT32 formated external drives but if the drives are formated as NTFS you'll only be able to read from them not write to them. That can be an issue is your catalog is on the drive. If you format the drives as Mac OS Extended (Journaled) your Windows machine won't see the drives unless you install a 3rd party driver (pretty easy & cheap).
But once you work out the compatibilities LR will run just fine on both Mac and Windows.

Cisco Hreap WLC and Apple TV

We are having problems getting apple tv to work for a customer. We have this working on a different controller and the AP (non Hreap). The AP/SSID that is having problems is setup the same (Blocking is set to disabled, and mutlicast is enabled). This one is setup for hreap, is that the problem, is it possible to utilize the airplay with an hreap installation?
Thanks,
Joe

Hi Joe,
What is the wlc model and code running on it?
Is the concerned WLAN enabled for local switching?
- If its in local switching mode, AP multicast mode set to multicast-to-multicast mode will not work, basically not supported. Is that the case?
- If its centrally switched it should work.
- Check if you have other multicast settings set-up correctly, global multicast and IGMP snooping enable.
I assume multicast routing is enabled on all WLc management, AP manager/AP, client vlan.
Regards
Sahil

Windows Users and Apple Products

Hi. I use both Mac and PC. I like them both. I have two iPhones and for reasons, will be using them with PCs. I think its cool that there is so much Apple technology that works with PCs like the iPhone, Mobile Me, Bonjour, iTunes, etc. In fact, if they ever made iWork and iLife for PC, I'd buy that too.
Question: Does anyone one know of a community, blog or website that focuses on PC/Windows users that like Apple technology? That would be very cool.
Kindest.

Hmmm. For iPods and iPhones and iTunes, there's specific Windows information and forums at iLounge:
http://www.ilounge.com/
They go a bit beyond the general troubleshooting advice that gets offered here in the Windows-specific forums at Discussions.

What to do about the Pinterest bug and Apple products?

There is a bug within Pinterest which disables ones ability to use the touch copy feature on Apple iPhone, iPad and iTouch. I have contacted Pinterest so many times they will no longer except my email. I would like to bring this to the attention of apple because I would think this problem Pinterest is in no hurry to fix would worry Apple. I would like to add there is nowhere on the web which disables the ability to touch copy except on Pinterest.

Why do you think this is a bug? Maybe it is a feature purposefully put in place by Pinterest to prevent stealing of people's copyrighted image?
Apple wouldn't reprogram Safari to overide code in third-party websites.

Cisco/Linksys Router Vulnerabilities

Hello,
I have an e3000 wireless router.. I am unable to disable wps on it.
The WPS vulnerability was exposed in December 2011, along with the reaver tool to exploit it.
https://threatpost.com/en_us/blogs/wifi-protected-setup-flaw-can-lead-compromise-router-pins-122711
Why is it that nearly a year later, that there hasn't been a firmware update allowing users to disable wps on their Cisco/Linksys routers?
Some have patches available, but judging by: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=3bccc46248f9417b909e2c1028f6778e_WPS.xml&pid=80&respid=0&snid=1&dispid=0&cpage=search
The majority do not.
Even more astounding is that refurbished models are still available through your homestore:
http://homestore.cisco.com/en-us/Routers/Linksys-E3000-HighPerformance-Wirelessn-router_stcVVproductId97826163VVcatId551966VVviewprod.htm
Why is it that I have to update a major security vulnerability through dd wrt or tomato?
I've bought and recommended Cisco products for a long time.. However, I cannot in good conscience do so any longer.
Why is it that Cisco cannot/will not support products that they have released?
Posted by WebUser Raavian Rehman from Cisco Support Community App

I don't work for Cisco but as this is a Cisco forum, not a linksys forum, I doubt you are going to get much response.
Sent from Cisco Technical Support iPad App

Cisco Linksys E3000 - Open DNS Error

I just purchased a Cisco Linksys E3000 and got it set up pretty much the way I want it. My only remaining problem is I wish to used Open DNS as my DNS server. On Line chat support says,"Please access router set up. Under the set up tab you will see the option for DNS1 and DNS2 please change it to 208.87.222 & 208.67.220 and save settings". I replied"I am on the basic set up page and currently I see Static DNS 1 thru 3 which are currently all zeros is that where you want me to put the new DNS numbers?"
I made the changes as directed, saved and also flushed the DNS cache in Windows and in Firefox, rebooted and everything worked great.
The problem is if the computer goes to sleep or is shut down when it restarts it cannot find the DNS server! What am I missing?
Thanks

Thanks for your help. This one really has me baffled
As you can see below the static DNS is set to 3 adddresses for Open DNS and everthing works fine.untill either the computer goes to sllep or is shut down. Then the router can no longer locate a DNS server. The only way I can find to get everything working again is to zero out the address for Open DNS and reboot the router which somehow reestablises the DNS servers as:
DNS Servers . . . . . . . . . 156.154.119.11
                                       156.154.129.11
                                       192.168.1.1
You can also this below and I hope you have some idea of what is happening. I never had this problem before with any other routers on this system.
Thanks,
Chick
C:\Windows\system32>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Dominator
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : TAP-Win32 Adapter V9
   Physical Address. . . . . . . . . : 00-FF-8F-A2-D9-9F
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : NVIDIA nForce 10/100/1000 Mbps Ethernet #
2
   Physical Address. . . . . . . . . : 00-04-4B-14-AE-3F
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::6d9a:9c78:1a19:fbfa%19(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.133(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Saturday, September 24, 2011 2:57:14 PM
   Lease Expires . . . . . . . . . . : Sunday, September 25, 2011 3:07:26 PM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 469763147
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-75-07-8A-00-04-4B-14-AE-3F
DNS Servers . . . . . . . : 208.67.222.222
                                       208.67.220.220
                                       208.67.220.222
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{13320496-B6EC-4CA2-9952-BDB3B51EED80}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 12:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{8FA2D99F-77B6-4DB6-9F88-C9952D1BE3EF}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
C:\Windows\system32>
After Zeroing out Static DNS from Open DNS Address I get:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Dominator
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : NVIDIA nForce 10/100/1000 Mbps Ethernet #
2
   Physical Address. . . . . . . . . : 00-04-4B-14-AE-3F
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::6d9a:9c78:1a19:fbfa%19(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.133(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Saturday, September 24, 2011 3:38:12 PM
   Lease Expires . . . . . . . . . . : Sunday, September 25, 2011 3:38:12 PM
   Default Gateway . . . . . . . . . : fe80::c2c1:c0ff:fe7b:a655%19
                                       192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 469763147
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-75-07-8A-00-04-4B-14-AE-3F
   DNS Servers . . . . . . . . . . . : 156.154.119.11
                                       156.154.129.11
                                       192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 12:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:3451:dea:3f57:fe7a(Prefe
rred)
   Link-local IPv6 Address . . . . . : fe80::3451:dea:3f57:fe7a%10(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{13320496-B6EC-4CA2-9952-BDB3B51EED80}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
C:\Windows\system32>

Cisco Linksys Routers and Apple Products?

Similar Messages

Maybe you are looking for