Cisco LMS 3.0 step by step configuration guide
Hi all,
Can any body give me cisco LMS 3.0 step by step configuration guide. that is great help for me.
Thanks
Afzal
LMS 3.0 is a very old version. You can refer to the product documentation here to start. The "Installing and Getting Started Guide" there should be useful.
You may want to take a look at this guide for LMS 4.1. Some of the terms are updated to reflect the application's changes over the past couple of years but the concepts are applicable.
Similar Messages
-
Want XI installation and configuration guide
Hi All,
I am looking for step by step Installation and configuration guide.
I want step by step procedure for the below things.
1) Pre requisits before installation.
2) Oracle installation
3) Install central instance
4) Install Database instance
5) Database installation(Oracle)
6) WEB AS JAVA 6.40 INSTALLATION
7) PATCHING SAP WEB AS 6.40 TO SP16
8) Testing Java install
9) SAP EXCHANGE INFRASTRUCTURE 3.0 SR1 PREPARATION
10) XI 3.0 SR1 POST INSTALLATION
Can anybody send a pdf or documents to [email protected]
Thanks and regards,
Chirag Gohil
2)Hi
Installation Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
Configuration Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
For Post Installation checkout the below thread
Installation of PI 7.0
PI(XI 7.0) configuration guides
I guess these materials are enough to answer all ur querries.Any speacific issues ,feel free to revert back.
Also reward with suiatble points -
STep by Step ISDN E1 Link Configuration
Dears
i need a STep by Step ISDN E1 Link Configuration
i have no knoledge about it and i really wanna learn it before the CCIE Lab
RegarsdYou can find it here
https://supportforums.cisco.com/document/125801/basic-isdn-pri-e1-configuration -
Configuring Wired 802.1x Authentication step-by-step guide
Hello All
I don't have a question at the moment, but I wrote a step-by-step guide on how to configure Wired 802.1x Authentication on Windows Server 2012 using Cisco switches.
You can find the document on my website http://www.accessdenied.be/blog
regards
Johan Loos CISSP,MCT,ISO 27001 and othersHi Johan,
Thanks for your sharing.
As this post is not a question, I will change it to Discussion. In addition, I would recommend that you to publish guide at TechNet Wiki.
http://social.technet.microsoft.com/wiki
Best Regards,
Aiden
Aiden Cao
TechNet Community Support -
What are the steps involved in configuring Oracle EBSR12 after installation
What are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.
Thanks,
SRWhat are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.All Oracle EBS Docs 11i/R12 can be found at:
Oracle Applications Documentation
http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein -
Errors in few of the step while running configuration wizard for PI 7.0
hi all,
i have installed Netweaver 2004s (PI 7.0) quality. during installation i had chosen sld option to be my development system as i wanted to use just single SLD.
now for the post installation steps i had run Configuration wizard. i haven't yet implemented Note : 939592 : PI Usage configuration versus Central SLD as it says first i need to perform all CTC steps.
now in this i got error in few steps:
STEP1 : PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
the error was: CIM_ERR_FAILED: Object manager is not activated
PI_05_This wizard will configure the integration server for sld.
The error was:
Error: CIM_ERR_FAILED: User credentials are invalid or user is denied access
PI_09_This wizard will configure Role of Integration server
Not able to load function SXMB_SET_ROLE_TO_IS( Connect to SAP gateway failed).
What should i do?
Regards,
Priyanshu SrivastavaHi Priyanshu,
"Object manager is not activated" simply means, that the SLD server is not started. So, please, first of all navigate to the SLD URL http://<host>:<httpport>/sld, login with an administrative SLD user -> Admininstration and push the star button.
Regards,
Blanca -
How To Configure Or Intialize Portal Installed With BI7.0 - Step By Step
Hello Gurus
How do I configure or start working on portals which is installed as part of BI 7.0 installation that is EP and EP Core(Includes BI-JAVA and ABAP Stacks).
Please help me out with possible guidance(if possible Step by Step procedure) how to set up the parameters and at which locations in BI.. I have kept couple of days exploring this site, but I couldnt fine one answer relating.
More over the answers I could find was "To configure technical content, business content and bi admin cockpit," Any help or suggestion provided is grealy appreciated and points will be awarded accrodingly.
Thanking you all gurus in advance,
Regards,
Parvez.Dear,
Try these links:
http://help.sap.com/bp_epv170/EP_US/BBLibrary/Documentation/N00_BB_Essential_Information_EN_US.doc
http://help.sap.com/saphelp_nw04/helpdata/en/7f/5bfc3f8fc2c542e10000000a1550b0/content.htm
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TEP12&COLLECTION=43&LANGUAGE=EN
http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
/people/srinivas.gv/blog/2005/11/28/role-and-configuration-of-isolation-methods-in-sap-enterprise-portal
/people/julia.kielbasiewicz/blog/2005/04/17/integration-of-sap-business-warehouse-and-enterprise-portal-150-single-sign-on
http://help.sap.com/saphelp_nw04/helpdata/en/0f/163c405865e801e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/98e6418b7eca17e10000000a155106/frameset.htm
/thread/189547 [original link is broken]
note: You can as well search in this forum.Im sure there are lots!
Thanks. -
Steps involved to Configure a Smartform for printing TO Item
Hi,
I want to develop a Smartform to print TO for each Item.
Currently it is being done using SAP Script.
I checked the Configuration in OMLV and assigned my print program Z****** .
This thing here is I don't see any values passed to my program like TO Number, Whse Number etc when called through LT31.
Where as I assign the standard program RLVSDR40 and debug it all the details are being passed to this program.
I am not sure if I am missing any configuration.
Please help me to figure out the issue and let me know all the steps involved in configuring the Smartforms to print Transfer Orders.
Thanks in Advance.
MK.Hi Murali,
The SAP delivers the solution to print the TO item by SAPScript, but we can do it by Smartform as well, as in
You need to create a project for the enhancement MWMD0001, because EXIT_RLVSDR40_001 will fulfill your purpose of doing it the other ways i.e. via Smart from.
For this you have to use CMOD transaction to create the project for the above said enhancement.
Note: If you do this way any configuration done via OMNU wont't be considered.
Then after in teh import parameters you have a table XRLDRI, which contains both the warehouse number and the transfer order number, the same can be passed on to the designed Smartform to fulfill your purpose.
Sample Code, you can refer to:
*local variable declaration.
DATA: l_wa_fm_name TYPE rs38l_fnam.
* Local Field Symbols
FIELD-SYMBOLS : <l_fs_rldri> TYPE rldri.
* Local Constant declaration
CONSTANTS : lc_fmname TYPE tdsfname VALUE 'XYXYXYXY', "Smartform name, here designated by 'XYXYXYXY'
lc_chk TYPE rldrudruck VALUE 'X'.
*Moving Transfer Order Print :Item level data into corresponding work area.
LOOP AT xrldri ASSIGNING <l_fs_rldri>.
* Determine smartform function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lc_fmname
IMPORTING
fm_name = l_wa_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc = 0.
* Call the function module of the smartform
CALL FUNCTION l_wa_fm_name
EXPORTING
user_settings = lc_chk
tanum = <l_fs_rldri>-tanum
lgnum = <l_fs_rldri>-lgnum
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc = 0.
ENDIF.
ENDIF.
ENDLOOP."LOOP AT xrldri ASSIGNING <l_fs_rldri>.
Please validate the same at your end and let me know in case you require any further inputs from my end.
BR/Thanks
Pranav Agrawal -
Workflow step by step configuration for scheduling level agreement release
Hi All,
I tried alot to configure step by step scheduling level agreement release using workflow.
But, The release code I couln't pass using workflow.
Plz guide me, or let me know some useful links for the same./Use the user exit M06E0005 to avoid all this problems.
In this user exit you can add your custopm logic based on your org structure and then workflow will take to all of release one by one. -
Hi All,
Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
Any help would be greatly appreciated.
Thanks in advance.
SamirMake sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.
-
Cisco pix 525 and 515 cannot archieve configuration in LMS 3.0.1
Hi,
we have several cisco pix 525 and 515 cannot archieve configuration in LMS 3.0.1
Any help would be greatly appriciated.
Thanks in advance
SamirHi,
Here is the output.
*** Device Details for ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
RUNNING
CM0151 PRIMARY RUNNING Config fetch failed for ********* Cause: SSH: Failed to establish SSH connection to 10.192.18.10 - Cause: Authentication failed on device 3 times.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
But when I do mangement station to Device it gives me following results:
Interface Found: 10.192.18.10
Status: UP
Test Results
UDP Failed
sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 64 protocol: udp port: 7
TCP Failed
sent: 0 recvd: 0 min: 0 max: 0 avg: 0 timeout: 0 size: 0 protocol: tcp port: 7
HTTP Failed
sent: 0 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 33 protocol: http port: 80
TFTP Failed
sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 size: 25 protocol: tftp port: 69
SNMPRv2c(Read) Okay
sent: 5 recvd: 5 min: 0 max: 0 avg: 0 timeout: 2 min_size: 1472 protocol: snmpv3_get port: 0
SNMPWv2c(Write) Failed
sent: 5 recvd: 0 min: 0 max: 0 avg: 0 timeout: 2 min_size: 1472 protocol: snmpv3_set port: 0
SSHv2 Failed
TELNET Okay
Waiting for your reply.
Samir -
Please tell me the step by step process of HP Tape drive configuration.
Dear all,
we are using ECC5.0 and windows 2003 server and oracle 9i .Please tell me the step by step process of HP Tape drive configuration. I Think initSID.sap file in to change the parameter,but which parameter configure.Please suggest.
Best Regards,
ThiruHello Thiru,
Once the backup completes,tape willl be automatically ejected.
I dont think there is any way by means of which you can see the data stored in the disk but yes what you can do is to run the backup with verify option
This BRBACKUP command option verifies the backup after the files have been backed up
Please refer to following for more info.
http://help.sap.com/saphelp_nw70/helpdata/EN/55/c491f37407e74781bc0ebd96befba7/content.htm
Rohit -
Need to know the steps to setup 'Configurable Search' in PeopleSoft CRM 8.8
Hi,
Could you please let me know the steps to setup 'Configurable Search' in PeopleSoft CRM 8.8(PeopleTools 8.48)?
ThanksPeopleBooks > PeopleSoft Enterprise CRM Automation and Configuration Tools PeopleBook > Configuring Search Pages
Nicolas. -
How do you Configure Coldfusion MX7 Developer Version Step by Step to an Apache Server?
Please provide exact steps as to how to Configure Coldfusion
MX7 Developer Version Step by Step to an Apache Server Step by
Step. I would be using the latest Apache Server download, which
would be: apache_2.2.4-win32-x86-no_ssl.msi Please provide this
answer ASAP.... Please also provide info on what folders to point
the system to when configuring; in the version I provided it is
rather hard to figure out what folders to use. Right now the way I
did it does not work and I cannot see the administration page when
the Apache Server is Running. Should the Apache Server be Running
while installing? Also I noticed after the first install of Cold
Fusion there is another step for full configuration where you have
to go to the local host page for further configuration. What do you
have to do there? I couldn't even get to that page because I
couldn't access the admin page after I did the installation. Any
help would be very welcome. Thanks in advance.This looks promising:
http://www.sitepoint.com/article/install-coldfusion-mx-windows
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"spinaweb" <[email protected]> wrote in
message
news:eorrk3$m1g$[email protected]..
> Please provide exact steps as to how to Configure
Coldfusion MX7 Developer
> Version Step by Step to an Apache Server Step by Step. I
would be using
> the
> latest Apache Server download, which would be:
> apache_2.2.4-win32-x86-no_ssl.msi Please provide this
answer ASAP....
> Please
> also provide info on what folders to point the system to
when configuring;
> in
> the version I provided it is rather hard to figure out
what folders to
> use.
> Right now the way I did it does not work and I cannot
see the
> administration
> page when the Apache Server is Running. Should the
Apache Server be
> Running
> while installing? Also I noticed after the first install
of Cold Fusion
> there
> is another step for full configuration where you have to
go to the local
> host
> page for further configuration. What do you have to do
there? I couldn't
> even
> get to that page because I couldn't access the admin
page after I did the
> installation. Any help would be very welcome. Thanks in
advance.
>
> -
Step-by-step configuration from XI to R/3 for Idoc to File Scenarious
Hi Gurus,
Am the Beginner in Xi, I tried to connect the Xi to R/3 for Idoc to File Scenario but the connection fails, (error in Rfc showing ), could any one send me the step-by-step sm59 configuration. R/3 version 4.6c and Xi version 3.0
rewards sure
advance thanks
with regards
Thambeehi,
I connected my 800 r/3 client to 100(xi) client, R/3 client is version 4.6d in it rfc test connection is sucessful but remote logon is not responding in my R/3 model view distributed and it's reflected in xi client, when I push the Idoc from R/3(bd10), Idoc created sucessfuly but not despatched
Idoc message type is 10 and 30.
Second thing am confused with Ip address bcoz 2 ip address in both system one is loopback and anoter one is tcpip adapter which one i have to give is sm59, help me plz
with regards,
Thambe
Maybe you are looking for
-
Hi, it is unpractical to keep wiping the firefox history every time I exit the app and leave the phone down. Is there no other way of setting a homepage that wont show the last sites i was at. There are kids in the house who may lift the phone and us
-
I have contacted apple support and followed the steps to uninstall itunes on my laptop, and then reinstalled itunes from the apple website. and when i connect my iphone to my computer it states that it cannot sync due to it not being the 64-bit versi
-
How to maintain Two Unit of Measure on One Item?
Hi Experts, good day! An item can be purchased either in Metric ton or Kgs. but maintain an inventory UoM in Kg only. What step do I need to consider, aside from creating a UDF. Since, I can see only one conversion in item Master data, 1 Metric Ton
-
I started using mpd with Sonata (I was using Amarok till now). I have not found any client that can show play count and song rate. Are these features not supported in mpd? Sonata can search for covers only in Amazon but never finds any cover. Can I c
-
Using Arabic Langauge in Flash
Hello every one, I have been using Flash5 and recently decided to make some arabic buttons in Flash. I have installed Arabic scrips on my laptop. when I open Flash and type any English word its alright but as soon as I change the language to Arabic i