Cisco LMS Ipv6 Support

Hi,
Does cisco LMS v3.2 Support IPV6 in all modules ?
We will be migrating from V4 to V6 in some time from now
Thanks

It has limitied ipv6 support.
Details are outlined here:
http://www.cisco.com/en/US/customer/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/overview.html#wp1090361

Similar Messages

Cisco-ids ipv6 support

Hi All,
Is/will cisco-ids support ipv6 for command&control and sensing?
Thanks
Henk

1) an "enhancement request" is a way for us to track that somebody is interested in a feature. This means that every time we look at doing a binary update, we will be reminded of the feature request and can prioritize it against other things we want to do. A lot of prioritization information comes from Marketing feedback, so I encourage you to make sure that your sales channel knows your needs. In short, its not planned so I can't say if it will ever be there.
2) correct...no dates announced yet.
see #1 for the last Q.
Scott

Cisco Prime LMS 4.x IPv6 support

Is there a document that describles the IpV6 support for LMS?

It's not documented in any one place that I have found.
Joe Clarke covered it in a post a post early last year. See here.
Per the release notes, I don't believe LMS 4.1 has changed that significantly.

LMS prime 4.2.5 IPV6 support

I'm attempting to configure LMS 4.2.5 to perform IPV6 addressing for polling and device management I need advice on how to proceed as I see very little documentation and I'm not seeing any options in the configuration web GUI

I've not had a chance to exercise the features, but there's a table in Chapter 1 of the LMS 4.2 Admin Guide in the section "IPv6 Support In LMS" that outlines exactly where you can use IPv6 device addresses across the various LMS functions.

Cisco 3550 EMI IPv6 support

Hi
How good is IPv6 support on the 3550 with the latest firmware?
I use them now as routers/L3 switches.
Must I replace them, or still going strong when i implement IPv6?

The following link should help:
http://www.cisco.com/en/US/partner/docs/ios/ipv6/configuration/guide/ip6-roadmap.html
Thanks,
Laurent.

IPV6 Support in Cisco IOS

I am having a difficult time determining why on a 2811 running IOS c2800nm-advsecurityk9-mz.150-1.M2.bin, the router won't accept ipv6 commands. The feature set from what I can discern includes ipv6 support. However, I have received mixed views. Does advsecurity image support ipv6 or do I need adv ip services image?

The philosophical direction of Cisco is to have full IPv4 and IPv6 parity across feature sets. Any IPv4 feature should appear in the same license level of software for IPv6.
That said, some older software and platforms may have been missed.
See
https://supportforums.cisco.com/community/netpro/network-infrastructure/ipv6-transition/blog/2011/09/21/ipv6-feature-packaging-in-cisco-routers-and-switches
See if the problem persists with the latest version. If so, I'd treat it as a bug and open a case.

IPv6 support in Cisco UC - especially CUAC

Guys,
Does anyone have any recent detailed information on IPv6 support and Cisco UC? The documentation on CCO is out of date by 3 years and doesn’t include information on applications such as Attendant Console (CUAC). The latest documentation from the UC 10.0 Beta Training is very high level. With key features like extension mobility not supporting IPv6, it’s difficult for us to advise customers on deploying a Cisco UC deployments whilst they are planning migrations to IPv6.
Does CUAC support IPv6?
Any updated details on Cisco UC support would be very much appreciated!
Thanks
Jonny

The philosophical direction of Cisco is to have full IPv4 and IPv6 parity across feature sets. Any IPv4 feature should appear in the same license level of software for IPv6.
That said, some older software and platforms may have been missed.
See
https://supportforums.cisco.com/community/netpro/network-infrastructure/ipv6-transition/blog/2011/09/21/ipv6-feature-packaging-in-cisco-routers-and-switches
See if the problem persists with the latest version. If so, I'd treat it as a bug and open a case.

Cisco switches that support IPv6 L2 security

I'm looking for Cisco switches that support IPv6 layer 2 security. The following features are required:
MLDv2 snooping [RFC4541]
DHCPv6 snooping [RFC3315]
DHCPv6 messages must be blocked between subscribers and the network so that false DHCPv6 servers cannot distribute addresses.
Router Advertisement (RA) filtering [RFC4862, RFC5006]
RA filtering must be used in the network to block unauthorised RA messages.
Dynamic "IPv6 neighbour solicitation/advertisement" inspection [RFC4862]
There must be an IPv6 neighbour solicitation/advertisement inspection, as in IPv4 "Dynamic ARP Inspection". The table with MAC-address and link-local and other assigned IPv6-addresses must be dynamically created by SLAAC or DHCPv6 messages.
Neighbour Unreachability Detection [NUD, RFC4861] filtering
There must be a NUD filtering function to ensure that false NUD messages cannot be sent.
Duplicate Address Detection [DAD, RFC4429] snooping and filtering
Only authorised addresses may be allowed as source IPv6 addresses in DAD messages from each port.
Source: http://www.ripe.net/ripe/docs/ripe-501
I've looked around in some configuration guides for some Cisco access switches but I can't seem to find any switch supporting these functionalities.

See if this helps.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-roadmap.html
You may also want to consult with your sales team.
What is the application?

Cisco LMS 4.0 Graph some time not coming

I have installed cisco lms 4.0.
I have added 10 devices, previously it was working fine, Since last few days some time syslog and graph are not coming. after every reboot on server it started working. It is happening on daily.plz help me out with permanent solution
and also i have added manualy one device 7609-s router but not able to see cisco view
Error:-
Cannot find applicable device package for 10.133.224.131.
This error could be due to one of the following:
- The device package for this device type is not installed.
- Device support for this device type is not available.
- You are trying to open a component inside a device.
To correct the problem, either install a device package for the device type, or open the parent device to manage the component.
In device attribute it is showing 868 integrated router, I had try to delete and add again but problem is still same...
Windows 2008 r2 standard
RAM-16 Gb, Swap memory 8096

Evrything looks good. Are you able to access LMS in the server itself? Try to install another browser on your server and try to login.
Try both :
http://x.x.x.x:1741
https://x.x.x.x:443
Share NMSROOT/MDC/tomcat/logs/stdout.log and stderr.log.
-Thanks

IPv6 support in JDMK 4.2

Hi,
We are working on enhancing our product to support IPv6. Currently we are using JDMK 4.2 with JDK 1.5. Wanted to know if there is any information about JDMK 4.2 support for IPv6?
1) Does it support binding using IPv6 interface
2) Can it accept SNMP request over IPv6 and send traps over IPv6 interface?
Or should we migrate our application to newer version of JDMK?
Regards
-murali

There is IPv6 support in the ASA version 8.2.
We just posted an IPv6 Quick Start guide at https://supportforums.cisco.com/docs/DOC-15973 and would appreciate feedback on it.
The Public Servers features is a NAT/PAT feature. The good news is that the immense address space of IPv6 eliminates the need for NAT, you can just use use access lists to set up your policy.

Upgrading from cisco LMS 3.0 to a latest version

Hello,
Upgrading from cisco LMS 3.0 to a higher version.
Whatdoes it require?.
What is the current version?
What do we need for upgrading?
Are there specific codes or new need to buy new products?
In case of buying new products, which are the configurations?

H Malik,
You are correct! Latest version is Cisco prime LMS 4.2. There is no direct upgrade from LMS 3.x to LMS 4.x.
The procedure is simple:
Take backup orf old LMS --> Un-install (if same machine)--> Install new LMS --> Restore backup to get old data.
You would need to purchase new license for it.Cisco Prime LMS is now part of the Cisco Prime Infrastructure bundle and is not orderable separately. Cisco Prime Infrastructure bundle follows a size-based incremental licensing model. Device licenses can be combined and added when applied to a single server installation instance. Customers have the option of adding incremental licenses for additional devices as their network grows.Refer to the Cisco Prime Infrastructure Ordering Guide located at http://www.cisco.com/go/primeinfrastructure for the exact part number that matches your requirement and placing the order.
Currently even SmartNet or SAS contracts does not cover major upgrades from LMS 2.x and 3.x; an upgrade part number will need to be purchased to move to Cisco Prime LMS 4.2. These upgrade part numbers reflect a significant discount to protect customers' investment in the Cisco Prime product line.
The data migration process will vary depending on the LMS version from which the data need to be migrated. Migrating data to LMS 4.2:
• LMS 4.2 supports local upgrade or direct inline upgrade only from LMS 4.0.1 and LMS 4.1.
• LMS 4.0 customers are encouraged to install LMS 4.0.1 before doing inline upgrade to LMS 4.2.
• LMS 3.2 and LMS 3.2 Service Pack 1 customers can do a remote upgrade through the LMS backup and restore mechanism.
• LMS 3.1, LMS 3.0, LMS 3.0 December 2007 Update, LMS 2.6, and LMS 2.6 Service Pack 1 customers need to do a remote upgrade to LMS 4.0.1 and then upgrade to LMS 4.2.
-Thanks
Vinod

IPv6 support in IOS

hi,
we have a Cisco 2851 router and bought the following IOS::
System image file is "flash:c2800nm-spservicesk9-mz.124-25d.bin"
Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(25d), RELEASE SOFTWARE (fc1)
I thought this version was supposed to have IPv6 support?
TEST(config)#ipv6 unicast-routing
^
% Invalid input detected at '^' marker.
TEST(config)#
which IOS should we buy?
regards,
Paal

I think you need the IOS advanced IP Services.
Cheers,
Eehab
- Please rate the asnwers you find useful.

Is cisco prime infrastructure support / can be run as syslog server?

Dear All,
is cisco prime infrastructure support / can be run as syslog server?
and,
where i can see network topology diagram, using cisco prime infrastructure?
many thanks,
Jerri

Hello. Cisco Prime LMS will be replaced by Cisco Prime Infrastructure in the near future.
In the current release of Cisco Prime Infrastructure you can't use topology diagrams. This feature is in roadmap.
About syslog, you can send syslogs to Cisco Prime Infrastructure, but I don't recommend using it as syslog server. Please see this link for more information https://supportforums.cisco.com/thread/2179520
Please rate if this helps

E4200 IPV6 support (and the removal of it)

Dear Linksys representatives,
Could you please provide some detail on why IPv6 was available in the first builds of the router but then got removed in later firmware versions and the official lecture is that IPv6 is not being supported at all.
I've had a nice little chat with one of your representatives and they could not clarify this at all. Actually, they say no Linksys devices EVER supported IPv6 period, which does not seem to be entirely true. Saw that 1.0.00 (build 13) for the e4200 actaully has IPv6 support in it and the current build has not.
Could you also make a sticky post about IPv6 support on all Linksys devices with wether they will be supporting it in the future or not? Depending on the outcome to this question I'm deciding to return my Linksys device or not, since I actually need to have IPv6 support for development of new soft- and hardware.
Kind regards,
Michel
ps: happy IPv6 day!
http://www.worldipv6day.org/

The E4200v1 and E4200v2 both support IPv6 in the latest firmware. Do you still have a problem? See also: http://home.cisco.com/ipv6 for a list of routers and the test suites that they have past.
All future home routers are expected to have IPv6.

IPv6 support for sx300 series?

Hi all,
I'm wondering if we are going to be seeing some better IPv6 support on these switches? Maybe even some static IPv6 routing?
Thanks.

Apparently it's on the roadmap for 2012, so with a bit of luck we'll see it some time then:
https://supportforums.cisco.com/thread/2113913
Oh, whoops, it's already 2013!
Seriously though, an update on where this feature request got to would be appreciated - is there anyone at Cisco who can give us an update?. Perhaps there's a version 8.0 of software for these phones about to be released with new support or something? v7 has been out there a while now.

Cisco LMS Ipv6 Support

Similar Messages

Maybe you are looking for