Cisco LMS VS HP open view

Good day team,
is there any major difference between them more than the one belows
Cisco LMS
only cisco devices
easy to manage
can use cisco discovery
HP OPEN view
MultiVendor
hard to manage
can not use deivce discovery

Hi,
I dont have a much experience with HPOV, but i can share more benefits from what you have already mentioned about
CWLMS, due to which I think it surpasses HPOV in many sense.
CiscoWorks LMS is a very powerful management  tools that simplify the configuration, administration, monitoring, and troubleshooting of Cisco networks.
Following are some of the more detailed features which separate LMS from any other NMS software :
> A strong next-generation device discovery is done using cisco Propreitary CDP and other new technologies, modules and protocols like HSRP, ARP, BGP, OSPF, Cluster Discovery Module, LLDP, and routing Table as well.
> Real-time network fault analysis with easy-to-deploy, device-specific, best-practice templates.
> Hardware and software inventory management, centralized configuration tools, and syslog monitoring.
> Monitoring and tracking of network response time and availability via IP SLA
> Real-time device and link management, as well as port traffic management, analysis, and reporting.
> Support for network virtualization through configuration, reporting, monitoring and troubleshooting for VRFLite networks.
> More quickly and reliably utilize Cisco best practices using Cisco Smart Business Architecture (SBA) templates.
> LMS has Smart Services Interaction for contextual Technical Assistance Center (TAC) case creation and Cisco Support Community and it's interaction can Smartly tap into the Cisco Support Community knowledge base, streamline interactions with TAC.
> Cisco Prime LMS manages the deployment of the latest Cisco technologies and services such as medianet, Cisco TrustSec, and EnergyWise.
> A very crucial support for End-host manangement, including a separate IP Phone information.
> An integrated Inventory, software and configuration archive mechanism.
> Get immediate up-to-date information about the network through flexible reporting for inventory, user tracking, compliance, switch port usage, end-of-sale, PSIRT, and other critical areas.
> Easily manage all phases of the end-to-end lifecycle of Cisco value-added technologies and solutions, such as medianet, EnergyWise, TrustSec and Identity, Auto Smartports, and Smart Install.
A better comparison, if you are planning to get one, is ofcourse by using both of them. A evaluation Copy of Ciscoworks can anytime be downloaded from :
http://www.cisco.com/en/US/products/ps11200/index.html
Hope it helps!
-Thanks
Vinod

Similar Messages

  • LMS 3.2 snmp trap forwardig to HP-open view

    Hi,
    I want to forward snmp traps from cisco LMS to HP-open view. Both applications are installed on different servers.
    From previous post in this forum, I found a similar post that recommand using snmp forwording in DFM.
    What I want to know is do I need any integration or packages to install on both platforms to do this? Also, will DFM forward all traps that it receives from installed devices or it will forward some of them.
    Thank you
    BR,
    ZS

    Chris;
       current version of Java is 1.6.0 Update 20
    Additional information to the issue:  a WS-C3750 has been discovered (connected to another 6509 that is running hybrid) and added to the topology map as it one would expect.
    craig

  • Cisco LMS 4.0 Graph some time not coming

    I have installed cisco lms 4.0.
    I have added 10 devices, previously it was working fine, Since last few days some time syslog and graph are not coming. after every reboot on server it started working. It is happening on daily.plz help me out with permanent solution
    and also i have added manualy one device 7609-s router but not able to see cisco view
    Error:-
    Cannot find applicable device package for 10.133.224.131.
    This error could be due to one of the following:
    - The device package for this device type is not installed.
    - Device support for this device type is not available.
    - You are trying to open a component inside a device.
    To correct the problem, either install a device package for the device type, or open the parent device to manage the component.
    In device attribute it is showing 868 integrated router, I had try to delete and add again but problem is still same...
    Windows 2008 r2 standard
    RAM-16 Gb, Swap memory 8096

    Evrything looks good. Are you able to access LMS in the server itself? Try to install another browser on your server and try to login.
    Try both :
    http://x.x.x.x:1741
    https://x.x.x.x:443
    Share NMSROOT/MDC/tomcat/logs/stdout.log and stderr.log.
    -Thanks

  • Cisco LMS 3.2 SYSLOG not storing after 10 days

    Hi ,
    Im facing one issue with Cisco LMS 3.2
    Issue : The logs is generating only for 10 days and post that im not able to see the logs. I have not done any config changes. The only change i have done is i have completely reinstalled the LMS. i did multiple troubleshoot but not able to resolve this isse. It would be great If any some one is  able to help me in this isse.  Thanks.
    Regards,
    Juliet

    Dear Vinod
    Thanks for ur response and the problem has been resolved.
    The purge policy was set to 60 days only .The problem in reports viewing setting.
    Syslog folder under LMS would store syslog reports of both the device as well as applications for defined folder size , which in your case was 1 MB ( same can be viewed under log generator option).  The  older reports would get deleted from the folder upon reaching the limit.
    The only way to view device syslog is under following option :  Reports -> Reports Generator  in LMS  GUI where we will have to choose syslog with desired attribute.
    Regards,
    Juliet

  • Cisco LMS 4.2.2 installation problem

    Hi
    The Cisco LMS 4.2 installation went without hickup, and it works fine.
    When i try to upgrade to 4.2.2 i get a error during the installation that some files are locked.
    I checked the documentation, it says nothing about stopping services before the upgrade.
    I tried stopping the management daemon, but it still throws the same error.
    You can view a screen shot on the link below.
    http://bildr.no/view/1276942

    After what you have done, it is strange to see this error. As if the Daemon manager is set to manual and Server rebooted, any ciscoworks process should not be running, unless started manually.
    Do you have any tool/software to manage processes and it starts some essential processes when they are down??
    > Do you see dmgtd.exe in task manager? It is Obvious for a executable to keep hold of many .dll library files, hence as soon as the .exe filed is killed, the .dll files should be free and you can try hitting retry.
    Please make sure you comply to following best practices for windows installation :
    https://supportforums.cisco.com/docs/DOC-9132
    -Thanks

  • Missing 'open view' functionality in 0ADHOC_TABLE (0ADHOC),  web template

    Hi - it appears that the 'open view' functionality is missing as button in web template 0ADHOC_TABLE (0ADHOC), despite there is 'safe view' functionality (button).
    Did someone add this button/functionality to 0ADHOC_TABLE?
    What is the correct Javascript coding as we already tried to incorporate the 'open view' Javascript from template 0ANALYZER what does not work in this matter!
    Thx for any hint!
    Rgrds,
    Markus
    Message was edited by: markus hoerr
    Message was edited by: markus hoerr

    Hi,
    as described in the documentation you have to add first HELP_SERVICE and HELP_SERVICE_CLASS to your Web Item
    http://help.sap.com/saphelp_nw04/helpdata/en/53/295640a2f78437e10000000a155106/frameset.htm
    This is done in Template 0ANALYZER with the TITLE Web Item. Just copy those 2 parameters from 0ANALYZER to 0ADHOC Template, then it should work.
    Heike

  • Unable to open "view picking Request"...

    Hi,
    Unable to open "view picking Request" form in sales order, getting error
    "Function not available on this responsibility change responsibility or contact your system administrator"
    My requirement is finding the 'pick release date' after order shipped.
    please suggest me to move forward.
    Thanks
    Suresh

    Please post the details of the application release, database version and OS.
    Please see these docs.
    In Sales Order Form, Attempt to View Shipping Status and get Error: Function Not Available to This Responsibility [ID 377649.1]
    Unable To View Sales Order Workflow Status [ID 304960.1]
    Sales Order Details Not Available In Task Drilldown [ID 832811.1]
    Cannot Activate Actions > View Only Adjustment Screen [ID 1351013.1]
    Thanks,
    Hussein

  • I can't seem to open (view) my photos.  I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."

    I can't seem to open (view) my photos.  I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."  I have never had this happen before?  Thanks!

    Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #1, Repair Permissions.
    OT

  • Cannot open/view/access interactive pdf form on iMac after updating Adobe Reader to 11.0.06.70

    Cannot open/view/access interactive pdf form on iMac after updating Adobe Reader to 11.0.06.70. Please help!

    Here is what it says:
    Please wait...
    If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
    You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html.
    For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html.

  • My pdf created in ID opens/views in Preview very large.  How do I export so that the pdf views smaller?

    My pdf created in ID opens/views in Preview very large.  How do I export so that the pdf views smaller?

    melanie475689 wrote:
    ...in Preview, the file still opened at the same large size. Any other thoughts/suggestions?
    Bob's post says it all. Preview ignores the PDF's Initial View setting, and beyond that, it's a horribly unreliable vehicle for accurate viewing of...just about anything. If you're engaged in professional design work, Preview has no legitimate place in your workflow.

  • Cisco LMS 4.0.1 to Prime Infrastructure 2.x Upgrade

    Hello,
    we are using Cisco LMS and want to upgrade to Cisco Prime Infrastructure.
    Now we have received the following license update: L-L-PI2X-100-U     -      LMS to Prime Infrastructure 2.x Upgrade 100 Device
    and I wonder what is the best way to upgrade.
    After a long search I found the following document on cisco:
    http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/guide-c07-729990.html#wp9000727
    There is only the talk of the upgrade from 4.2 LMS to Prime.
    The problem is that we can not update to version 4.2 because of an error. Thats one reason why we need to upgrade to prime.
    Is the only possibility now to export databases?
    thanks in advance

    Hi Heiko,
    Upgarding from LMS 4.0.1 to LMS 4.2  , you need a New Licesne . Are you getting that error..
    Upgarding from LMS to PI is alomost like a new Installation of PI. because only thing you can IMPORT from LMS to PI is the device list .
    you can download the software from the below link:
    http://software.cisco.com/download/release.html?mdfid=284422771&flowid=45323&softwareid=284272932&release=2.0.0&relind=AVAILABLE&rellifecycle=&reltype=all
    Installation  link:
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpi_higmain.html
    hope it will help
    Thanks-
    Afroz
    [Do rate the useful post]
    ****Ratings Encourages Contributors ****

  • Open View not seen in the 7.0 Query Analyzer

    Hello ,
    I am not able to see open view in the 7.0 Query Analyzer, but that seen in the 3.x Designer
    Are we missing something here, or its the GUI issue
    When we click on Open, I have only 2 options
    Open Query....
    Open Workbook...
    I could locate my view through the open Query & then naviagting it from the Dialog box, but thats does not seem a good way of locating views.
    Any help on this
    Regards
    Lalan

    Hi Lalan,
    The Query View is not missing and it's not a GUI issue.It's by design.
    With 7.x BEx Analyzer,the Query View can be opened only through Open->Open Query dialog
    where you have to select the "Type" as "Query View".It will list the available query views in the open dialog.Select the query view you want to open and click "Open".
    This is the way to open the query view with 7.x Analyzer.
    Rgds,
    Murali

  • Cisco lms - backup out of the box

    when using cisco lms 4.2.5 linux version, what would be the best way to backup the config files out of the box?
    what i'm lookin for is a way to take the shadow folder to another box for disaster recovery.

    Hi, i found this solution to work very well for exporting files out of the box:
    As user root:
    1) on cisco-lms install sshfs, which lets you mount a folder on a remote box through sftp:
    install in the following order:
    rpm -ivh fuse-libs-2.7.4-8.el5.x86_64.rpm
    rpm -ivh fuse-2.7.4-8.el5.x86_64.rpm
    rpm -ivh fuse-sshfs-2.5-1.el5.rf.x86_64.rpm
    2) mount 
    mkdir /mnt/backup
    sshfs root@<remote-linux-box-ip>:<remote-folder> /mnt/backup -o allow_other
    3) rsync with cron
    00 1 * * * rsync -r -v /var/adm/CSCOpx/files/rme/dcma/shadow/* /mnt/backup/ >> /root/rsync.log 2>&1

  • Error in Cisco LMS

    Hi,
    I get this error when i run some actions in CISCO LMS  3.2 i.e if I click in Campus Manager - Start Data Collection. it gives error " you are not access to request this action ".
    What can be the problem?
    Please find the attachment for your reference.
    Please Suggest. waiting for your prompt reply.
    Thanks

    to fix the database issue , you need to reintilaze the ANI database:
    1) Stop the daemon manager
    "net stop crmdmgtd"
    2) Go to NMSROOT\CSCOpx\bin.
     NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
    for linux:
    /opt/CSCOpx/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI
     3)  Wait for a few minutes before starting the CW daemons again:
     "net start crmdmgtd"   (wait for at least 5 minutes before using CW again)
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ***

  • Remove "inforarea" option when press "open view" in 0ADHOC web template

    hello expert,
    in a web template 0ADHOC, when you click on "open view" it gives you the option to select your view from history, favorites, roles, and infoarea. 
    I'd would like to remove the possibility to select a view from "infoarea" in the web template (a little bit like hiding the infoarea button in Bex using S_RS_FOLD).
    How can I achieve this?
    Many thks in advance,
    /Sid

    hi,
    I have just made a test:
    I have copied 0adhoc to zadhoc and then deleted SAP_BW_TEXT_!llD_129
    then I executed template in IE and text "BEx Ad-hoc Analysis" is missing from the top of report
    so those texts are exist as well
    Only question is: does those texts numbers same for all systems?
    Regards,
    Andrzej

Maybe you are looking for

  • Invoice Verification without posting Part II

    Hi, Invoice Verification has been done without posting of Part II entry for Goods Receipt.There is no part I qty remained in Excise doc (J1IEX). How to post Part II entry(Duty credit) with ref to GR.Please suggest for the same. Regards, Goraksh Dhika

  • What is the best way to have access to OSX and OS9 from the same machine?

    What is the best way to have access to OSX and OS9 from the same machine? Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly. G5   Mac OS X (10.4)  

  • Editable text box on each page, but generated from Master Page?

    I want to create a blank text box that lives on the Master Page so that it shows up on each page in the document, but I then would enter custom text into the field on each page ( or just leave it blank). I know, I know, I can do simply copy a text bo

  • Roles and Responsbilites

    Dear Guru's, I am Srini and am a Basis Consultant working last 3 years.Now i would like learn XI Administration. Can anybody provide me the details: 1.What are all the roles and responsbilites handled by XI Administrator. 2.I have one exmple,I have o

  • URGENT: Pool vs. Cache From JDBC

    JDBC forum is pretty empty, so I'll try here. I have a database layer that is configurable to allow admin to choose Oracle JDBC connection pooling or connection caching. Here are the results: OracleConnectionPoolDataSource.getPooledConnection().getCo