Cisco Meeting Place and Unity

Can anyone tell me where I can find a good book on how to administer Cisco meeting Place and Unity? Thanks.

This works on your voice network. There is a centralized server usually located in the same location as your CUCM with a SIP connection between the two. Bandwidth requirements are the same as a phone call. If you are using G.711, then 60K+ per call. Each participant calls into the system on either an internal number or on a PSTN line with a dedicated phone number(s). The enter the meeting ID and are in the meeting. Beside scheduled meetings reservationless is also supported. The MP Application Server handles managing the voices in a meeting and is the only server required.
MP runs on specific MCS server listed below and won’t install/be supported on other MCS servers.
MCS 7845-I3-RC2 Dual Intel E5540 2.53 GHz, 4x300 HDD, 8GB RAM
HP equivalent: DL380-G6 Server, part number AX693A
MCS 7845-I2-RC2 (end-of-sale 12/09) Dual Intel 5140 2.33 GHz, 4x146GB HDD, 4GB RAM
MCS 7845-H2-RC2 (end-of-sale 7/09) Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM
HP equivalent: DL380-G5 Server, part number 470064-887
MCS 7835-I3-RC1 Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4GB RAM
HP equivalent: DL380-G6 Server, part number AX690A
Note: The MCS 7835-I3-RC1 does not support multinode deployments.
The following URL (http://www.cisco.com/en/US/products/sw/ps5664/ps5669/tsd_products_support_series_home.html) is the location of a lot of the MP documentation.
Hope this helps.
John

Similar Messages

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

Cisco Meeting Place Express 2.1.1.2 and not working anymore

Hello, we currently have cisco meeting place express 2.1.1.2; however are now having issues with it. We are unable to dial to the internal extension that was previously working to login to the meetings and only get a busy signal everytime. Furthermore, whenever someone tries to schedule a new meeting via the web form, it says "request to server timed out. please try again".
I tried reaching out to Cisco TAC support; however it's no longer a supported item and am looking for assistance here. The TAC engineer was able to help assist with updating the system clock; however I believe the problems started happening after we updated the clock and rebooted the server. Now we are unable to schedule and attend any meetings (busy signal everytime) at all. I tried restarting the server itself as well as via the command line. I also now see an error during CLI restart, which I have listed directly below:
Stopping MeetingPlace SNMP/R:                              [ OK ]
Stopping mpe-tomcat-main: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Stopping mpe-tomcat-securewebservices: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Shutting down breeze:                                      [ OK ]
Shutting down fmsmaster:                                   [ OK ]
Shutting down fmsadmin:                                    [ OK ]
Stopping MeetingPlace application: /etc/init.d/mpx_app: line 264: 4955 Segmentation fault      (core dumped) ${shutdown_bin} ${shutdown_arg_1} ${shutdown_arg_2} ${shutdown_arg_3} >>${non_verbose_shutdown_output} 2>&1
                                                           [FAILED]
    ERROR: returncode = 139
Stopping MeetingPlace License Manager:                     [ OK ]
Stopping MeetingPlace database:                            [ OK ]
Stopping MeetingPlace Java RMI: Shutting down RMI Registry:
                                                           [ OK ]
Stopping Cisco MeetingPlace Express:                       [ OK ]
Starting MeetingPlace Java RMI: Starting RMI Registry:
starting daemon
mpxadmin
                                                           [ OK ]
Starting MeetingPlace database:                            [ OK ]
Starting MeetingPlace License Manager:                     [ OK ]
Starting MeetingPlace application:                         [ OK ]
    already running
Starting breeze:                                           [ OK ]
Starting fmsmaster:                                        [ OK ]
Starting fmsadmin:                                         [ OK ]
Starting mpe-tomcat-main: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Both the admin and user web interfaces work on the home pages, but can't seem to schedule any new meetings or login to any existing ones, with busy signal as well. Anyone have any ideas? We need assistance with this ASAP since it's our voice collaboration solution. Thanks in advance for any help.

Amlesh,
Here is the pertinent output:
/common/log/taos-log-a/core/core.1947.11.ConfSchd.1183266069
/common/log/taos-log-a/core/core.1837.6.gyromain.bin.1183266161
/common/log/taos-log-a/core/core.1859.6.cpgs.1183266206
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1184475669
/common/log/taos-log-a/core/core.1946.11.ConfSchd.1185685269
/common/log/taos-log-a/core/core.1836.6.gyromain.bin.1185685332
/common/log/taos-log-a/core/core.1880.6.cca.1185685452
/common/log/taos-log-a/core/core.1858.6.cpgs.1185685452
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1185771671
/common/log/taos-log-a/core/core.1863.6.cpgs.1185771865
/common/log/taos-log-a/core/core.1884.6.cca.1185771865
/common/log/taos-log-a/core/core.1991.6.nmpagent.1185771865
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1185858067
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1188018079
/common/log/taos-log-a/core/core.1969.11.ConfSchd.1188190869
/common/log/taos-log-a/core/core.2008.6.vui.1188190988
/common/log/taos-log-a/core/core.2029.6.nmpagent.1188190988
/common/log/taos-log-a/core/core.1998.6.poclient.1188190988
/common/log/taos-log-a/core/core.1970.11.ConfSchd.1189227671
/common/log/taos-log-a/core/core.1862.6.gyromain.bin.1189227762
/common/log/taos-log-a/core/core.1883.6.cpgs.1189227807
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1189918866
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1190005281
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1190178068
/common/log/taos-log-a/core/core.1886.6.cca.1190178237
/common/log/taos-log-a/core/core.2012.6.nmpagent.1190178237
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1191906070
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1191906162
/common/log/taos-log-a/core/core.1886.6.cca.1191906248
/common/log/taos-log-a/core/core.1865.6.cpgs.1191906248
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1192424479
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1192424571
/common/log/taos-log-a/core/core.1863.6.cpgs.1192424613
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1192597270
/common/log/taos-log-a/core/core.1969.11.ConfSchd.1192683669
/common/log/taos-log-a/core/core.1903.6.cca.1192683817
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1193029270
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1193029360
/common/log/taos-log-a/core/core.1864.6.cpgs.1193029400
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1193720467
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1193720565
/common/log/taos-log-a/core/core.1864.6.cpgs.1193720610
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1195452071
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1195452170
/common/log/taos-log-a/core/core.1864.6.cpgs.1195452213
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1196834481
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1197007273
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1197007371
/common/log/taos-log-a/core/core.1864.6.cpgs.1197007413
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1198044080
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1198044184
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1199858530
My understanding is these core files are crash dumps and are safe to delete?
Jared

Cisco meeting place 8.0 upgrade media download or PUT and upgrade process?

Hello all, I have been given the task to upgrade our cisco meeting place sever version 8.0.1.3 on both the app server and web sever.
We have a valid UCSS and I would like to go to version 8.5 Is this something I can order via PUT or can I download one of the upgrades I see on cisco's website?
Also I'm a little confused on the upgrade process. I've read another post that I have to export the exsisting data then do a fresh install of 8.5 then import the data..... Is this true?
Thanks,
Dan

Hi Playne,
It depend what kind of deployment is running right now. Please read this article:
http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/8_5/english/administration/migrate_matrix.html#wp1031995
From Release 8
For complete information on compatibility requirements for Release 8.5, see the Compatibility Matrix for Cisco Unified MeetingPlace Release 8.5 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_device_support_tables_list.html.
Table 5 Migration Process For Different Deployments From MeetingPlace Release 8.0
FROM
Current System
TO
Audio Only
TO
MeetingPlace Scheduling
MeetingPlace-Driven User Management
TO
WebEx Scheduling
MeetingPlace-Driven User Management
TO
WebEx Scheduling
WebEx-Driven User Management
Audio/Video Only
Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
Not supported
Not supported
Provision a new Cisco WebEx site.
Migrating Using the MPtoWebEx CSV Converter
Meetings are not migrated. Keep your existing system to play existing recordings.
MeetingPlace Scheduling
WebEx Conferencing
MeetingPlace-
driven User Management
Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
As required, coordinate with your Cisco WebEx CSM to upgrade to the Cisco WebEx WBS27 SP27 or later Release.
Not supported
Provision a new Cisco WebEx site.
Migrating Using the MPtoWebEx CSV Converter
Meetings are not migrated. Keep your existing system to play existing recordings.
WebEx Scheduling
WebEx Conferencing
MeetingPlace-
driven User Management
Not supported
Not supported
Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0 module
As required, coordinate with your Cisco WebEx CSM to upgrade to the Cisco WebEx WBS27 SP27 or later Release.
Provision a new Cisco WebEx site.
Migrating Using the MPtoWebEx CSV Converter
Meetings are not migrated. Keep your existing system to play existing recordings.
WebEx Scheduling
WebEx Conferencing
Webex-driven User Management
Not supported
Not supported
Not supported
Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
As required, coordinate with your Cisco WebEx CSM to upgrade to the Cisco WebEx WBS27 SP27 or later Release.
Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
LinkedIn Profile: do.linkedin.com/in/leosalcie

Cisco Meeting Place Express 2.0 Exchange Server Configuration error.

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system.
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Обычная таблица";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
I have a problem with Cisco Meeting Place Express and Exchange Server synchronizing.
The Cisco Meeting Place Settings are
Exchange Server
Hostname *
Language* de_DE en_AU en_GB en_US fr_CA fr_FR
SSL   enabled * true false
Cisco Unified MeetingPlace Express   Mailbox Account
Windows   domain *
Username *
Password *
Password   confirm *
E-mail   address *
Mailbox   maintenance interval (days) *
Mailbox   maintenance cutover (days) *
When I type the button test, I receive “Authentication error. Check the authenticated access to the Exchange Server for Microsoft NTLM authentication scheme.”
My Exchange Server is synchronized with MS Active Directory. As far as I know, Kerberous is used for authentication. So, how can I enable NTLM authentication scheme on AD? Are there any other options for Cisco MPE and Exchange synchronization?
Thanks for help
Sincerely yours
Sergey Bondarenko

st1\:*{behavior:url(#ieooui) }
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Обычная таблица";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
Thanks a lot.
I have corrected domain name in configuration after your advice. Cisco MPE Exchange Configuration is working very well now. I’m able to start a meeting from the outlook calendar and send messages to meeting participants.
Thank you very march for your assistance!
Sincerely yours
Sergey Bondarenko

Meeting place and SRST feature

Hi all,
I am new to Voice communication. So, i need help from you guys.
One of my customer one to have cisco Meeting place express on their premises. Basic requirement is -
i) Voice, video and document sharing
ii) PSTN and PABX integration with the solution [SRST feature]
Can you share design and BoM?
Thanks i advance.
Russell

MeetingPlace Express is end of sale and cannot be ordered any longer.
Also, this is not the correct channel for sales/BoM assistance. You need to work with Cisco Presales assistance and/or your Cisco AM if you require assistance on that front.

Cisco Meeting Place requirement

Please, we are trying to deploy cisco meeting place for the purpose of easy conferencing and presentation sharing.
Do i need to have a Cisco unified call manager, and all we have is a panasonic pabx.
Please advice the way forward.
Thanks.

MeetingPlace Express is end of sale and cannot be ordered any longer.
Also, this is not the correct channel for sales/BoM assistance. You need to work with Cisco Presales assistance and/or your Cisco AM if you require assistance on that front.

Cisco Meeting Place - lab requirements

Hi All,
Appreciate if anyone can just give me a quick pointer.
Apparently; I have limited/no knowledge of implementing the Cisco Meeting Place.
I would like to setup a demo lab/environment for practise.
I managed to obtain the Cisco Meeting Place 7.0 thru the Cisco Unified Workspace for Partners Software & licensing kit.
It came with 4 CDs
1. Cisco Unified Meeting Place Web Conferencing
2. CIsco Unified Meeting Place Application Server
3. CIsco IP Telephony Server Meeting Place (MCS7825,hp servers)
4. Cisco IP Telephony Server Meeting Place (IBM Servers)
I would like to install it in a VM environment.
What else is needed from my side to run Meeting place as a demo lab??
I went thru its hardware requirements
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace%2C_Release_7.0_--_Hardware_Requirements
Application Server
Media Server
Web Server
Would i be able to run all the above 3 on VMware?

This works on your voice network. There is a centralized server usually located in the same location as your CUCM with a SIP connection between the two. Bandwidth requirements are the same as a phone call. If you are using G.711, then 60K+ per call. Each participant calls into the system on either an internal number or on a PSTN line with a dedicated phone number(s). The enter the meeting ID and are in the meeting. Beside scheduled meetings reservationless is also supported. The MP Application Server handles managing the voices in a meeting and is the only server required.
MP runs on specific MCS server listed below and won’t install/be supported on other MCS servers.
MCS 7845-I3-RC2 Dual Intel E5540 2.53 GHz, 4x300 HDD, 8GB RAM
HP equivalent: DL380-G6 Server, part number AX693A
MCS 7845-I2-RC2 (end-of-sale 12/09) Dual Intel 5140 2.33 GHz, 4x146GB HDD, 4GB RAM
MCS 7845-H2-RC2 (end-of-sale 7/09) Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM
HP equivalent: DL380-G5 Server, part number 470064-887
MCS 7835-I3-RC1 Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4GB RAM
HP equivalent: DL380-G6 Server, part number AX690A
Note: The MCS 7835-I3-RC1 does not support multinode deployments.
The following URL (http://www.cisco.com/en/US/products/sw/ps5664/ps5669/tsd_products_support_series_home.html) is the location of a lot of the MP documentation.
Hope this helps.
John

Cisco Meeting Place requirements and solution

Hi There,
I would like to have a on-site; server based manageable audio conference solution in our organization. We have 1 HO. and 25 remote branches located over the country. The Audio system should work via our data network. We have point to point and MPLS link throughout the network.
Audio conference can be held through outlook express/web browser. If not, we can also opt for 1/2 IP Telephones in each Remote site. The HO audio/conference requirement is for 15 users.
We also need to setup conference/Boardroom VC in the Head Office where all the HO Dept Managers would sit in case of remote site conference meeting.Also note that we have data connectivity in all the branches but Internet connections may/may not be available in some of the remote branches.
I have gone through Cisco unified MeetingPlace and looks like a perfect solution to us. Could you please advise if this is the best solution for our audio solution. If yes, Please advise how this would work and suggest part code and license information.
Thanks
Aakash.

This works on your voice network. There is a centralized server usually located in the same location as your CUCM with a SIP connection between the two. Bandwidth requirements are the same as a phone call. If you are using G.711, then 60K+ per call. Each participant calls into the system on either an internal number or on a PSTN line with a dedicated phone number(s). The enter the meeting ID and are in the meeting. Beside scheduled meetings reservationless is also supported. The MP Application Server handles managing the voices in a meeting and is the only server required.
MP runs on specific MCS server listed below and won’t install/be supported on other MCS servers.
MCS 7845-I3-RC2 Dual Intel E5540 2.53 GHz, 4x300 HDD, 8GB RAM
HP equivalent: DL380-G6 Server, part number AX693A
MCS 7845-I2-RC2 (end-of-sale 12/09) Dual Intel 5140 2.33 GHz, 4x146GB HDD, 4GB RAM
MCS 7845-H2-RC2 (end-of-sale 7/09) Dual Intel 5140 2.33 GHz, 4X146 GB HDD, 4GB RAM
HP equivalent: DL380-G5 Server, part number 470064-887
MCS 7835-I3-RC1 Single Intel 5504 Quad-core 2.00 GHz, 2x146 HDD, 4GB RAM
HP equivalent: DL380-G6 Server, part number AX690A
Note: The MCS 7835-I3-RC1 does not support multinode deployments.
The following URL (http://www.cisco.com/en/US/products/sw/ps5664/ps5669/tsd_products_support_series_home.html) is the location of a lot of the MP documentation.
Hope this helps.
John

Cisco meeting place 7 support for lotus notes 8.5.3

Hi guys,
Does anyone know if meeting place 7 support for lotus notes 8.5.3 ?
The template listed on my meeting place is 8.5.2 and I have try to find if we can download new template and then put it on the server, but looks like that's not the case.
Thanks,
Vikram

Update on this, I've also done the procedures of "Patch Cisco Unity for IBM Lotus Notes 8.x Support" &
"Add the Domino 8.5.x MailFileTmplt Registry Key on the Cisco Unity Server" according to
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/release/notes/702curelnotes.html#wp593368 but without any luck.
Any kind soul?
Rgrds,
Alex

Cisco Meeting place 6.x unable to open admin page

i am having meeting place 6.x .configure IP address to both NICs . Gateway SIM showing me s connected, But Web page of meeting place unable to display

Please have a look at the ssl settings on the ASA: "show run | i ssl".
You may not have strong ciphers enabled and the PC with the newer browser does not accept the default weak ciphers. I make it a habit to setup ASAs with:
ssl encryption 3des-sha1 aes128-sha1 aes256-sha1 rc4-md5
Those are all strong ciphers.

Meeting Place and Webex Call Back Failing

Hi
Meeting place 8.5 with WebEx scheduling, SIP trunk to CUCM 8.5.
Calling in using the specified number configured in call manager completes over the SIP trunk however call back from webex fails.
Error:
WebEx call back failed; no answer.
Problem is I never recieve a call. I have enabled Webex call backs in webex.
Seems like there is an issue on either MP or CUCM.
Just looking for some ideas as I am stumped.

This turned out to be a few things:
1) I needed to configure a SIP proxy to CUCM from meeting place. This was the CUCM IP address and TCP port number.
2) The SIP trunk security profile needed to be reconfigured for this trunk.
3) E164 was being used so I created a translation pattern to strip the + for the CSS associated with the RP.
A few things learned along the way.
1) The "activity" command ran from a SSH prompt with allow you to simulate a call from meeting place. Option 4, enter the number to dial and "f" for port.
2) In meeting place - Services -Logs - System Information Capture - Loading the index file and under the CCA SIP LOG is the error being returned by CUCM. In my case it was Warning: 399 CSLCCM1 "Unable to find a device handler for the request received on port
3) Command "cptrace" again from the SSH prompt will allow you to view the digits being sent from webex to meeting place.
I hope this information helps someone...

Cisco Meeting Place Express

Hello All,
I am trying to do the Meeting Place Express 8.0 Integration with interal WEBEX node for MCS "Type 2 Integration". My confusions are
1- Can we install Internal webex node on MCS without integrating with Cisco Webex Cloud?
Internal node will be used for scheduling the in house meeting. This configuration i am doing to acheive the LAB demo system.
My understanding is :- Internal WebEx node cannot be installed as a standalone without Webex Cloud Node.
Pls educate me how to proceed
If possible, Pls help me to get the document to acheive this configuration.

Hello All,
I am trying to do the Meeting Place Express 8.0 Integration with interal WEBEX node for MCS "Type 2 Integration". My confusions are
1- Can we install Internal webex node on MCS without integrating with Cisco Webex Cloud?
Internal node will be used for scheduling the in house meeting. This configuration i am doing to acheive the LAB demo system.
My understanding is :- Internal WebEx node cannot be installed as a standalone without Webex Cloud Node.
Pls educate me how to proceed
If possible, Pls help me to get the document to acheive this configuration.

Cisco Meeting Place

Can I connect an analog 4-wire circuit into the voice Gateway associated with MeetingPlace ? I see it can take an E1 or T1 PRI but nothing about a 4-wire circuit. What card does Cisco recommend for this connectivity ?

Try it from Data sheet:
http://www.cisco.com/en/US/products/hw/modules/ps2617/products_data_sheets_list.html

Cisco Meeting Place 8.5.2 DVD

Hi all,
We just received the Cisco MP 8.5.2 DVD from the PUT.
Prod#: MP8X-AV-SVR-K9-UP
We tried to do a clean installation via VM.
However on the installation process it HANG/STUCK at:
Running install…
Running /sbin/loader
Appreciate if anyone can please advise on the possible fault
Regards: Jocelyn

Hi Jocelyn
I am facing exactly the same issue with the MP 8.5.2 shipped with the 8.6 NFR bundle.
Tried on a VM on ESX 5, tried it as well on a VM on VmWare WS8, same result.
Tried to tweak guest OS (RHEL4 x86 or RHEL5 x86) - same result.
Is it possible that the actual DVD has a corrupted image? /sbin/loader runs from DVD at that stage.
If you solved the issue, please share the solution
Thanks
MR

Cisco Meeting Place and Unity

Similar Messages

Maybe you are looking for