Cisco Mobile 8.0 for iPhone Running Status

I am running Cisco Mobile on my iPhone and have it working, but cannot get the app to stay running in the background. Anyone have any insight on this?

8.0 doesn't support multitasking, 8.1 does however:
Cisco Mobile Release 8.0 runs on iOS 4.2 but does not support multitasking.
http://www.cisco.com/en/US/docs/voice_ip_comm/cumc/cisco_mobile/iPhone/8_0/Cisco_Mobile_iPhone_8x_RN.html#wp42250
Chris

Similar Messages

  • Cisco Mobile 8.0 for Iphone and Presence

    Is there any plan to provide Presence and IM to the Mobile 8.0 client in the future?

    1.     When will the updated 8.0 version be available for Iphone that will operate in the background?
    8.0 on iPhone has been available for a while.  There's no ETA on next release (8.5 maybe?)
    2.     When will a Droid version be available?
    ETA Nov 2010.
    3.      If you are committed to Iphone an Droid only (no bberry or symbian os),  is there any reason to implement the Cisco Unified Mobility product?
    Not sure what Cisco Unified Mobility product you were referring to.
    "Cisco Unified Mobility" is the feature on CUCM that provides SNR (Single Number Reach), MVA (Mobile Voice Access) and EFA (Enterprise Feature Access).  It has nothing to do with iPhone or Droid.
    Michael
    http://htluo.blogspot.com

  • Cisco Mobile 8.0 for iPhone

    HI,
    Interested if anyone has used Automatic Setup option for Users & Devices? Trying to figure out what you as an Admin need to setup and what can get done bu users?
    Thanks
    Charl

    I should have been a bit more specific. In terms of the following, what gets provisioned by the admin and what
    can the users do themselves(via automatic setup):
    - Setting Up Voice Over IP and  Standard Telephony Features
    - Setting Up Transfer of  Active Calls Between Cisco Mobile 8.0 and the Desk Phone
    - How to Enable Transfer of  Active Calls from VoIP to the Mobile Voice Network (GSM)
    Thnx
    Charl

  • Cisco Mobile 8.1 for iPhone - Help with features please

    Hello all,
    We have just upgraded to 8.0.3 and have added the iPhone cop file so we can have Mobile up and running.
    So far we have managed to get 8.1 working fine on 3 iPhones successfully with the basics but have not managed the following:
    1) Corporate directory access. We are not integrated with AD and have read that iPhone app cannot pull the end user directory. Is there another way apart from integrating with LDAP as we have a lot of users in the end user directory that do not have profiles in AD and I presume they will all get disabled as soon as we integrate..
    2) GSM handoff - I have been going through the config to get this up and running and any tips would be very much appreciated.Do you need to add a directory number for the handoff number or is the config as simple as 2 boxes? (Call routing>Mobility configuration - Handoff number and Partition)
    3) Voicemail - Is it possible to have voicemail if we are not running connection. We have version 7 of standard unity...
    Your help would be greatly appreciated on any of the above...

    Hi Mike,
    In my opinion you have a routing problem. Please check if a VPN client knows the route to the other VPN client. Print route on a VPN laptop. Check gateway for the given IP range (default or static route).
    Then on your internal routing equipment you must have route for your VPN ip range configured.
    If I'm not wrong you cannot ask your VPN box to route traffic directly between 2 established tunnels. It must first go outside first tunnel and then revert back to VPN concentrator and enter second tunnel.
    Signaling differs from RTP because it goes through the SIP proxy and not p2p, so that's why it rings.

  • Cisco Mobile 8.1 for iPad

    We are trying to install and test Cisco Mobile 8.1 for iPhone. we have entered all necessary info and get back a "protocol not suppoeted" message. Has anyone successflly deployed Cisco Mobile 8.1 for iPhone  on the ipad?

    It seems to have been removed from iTunes from what I have searched. Maybe Apple pulled it because of some compliance reason.
    Sent from Cisco Technical Support iPhone App

  • Cisco Mobile 8.1 w/iPhone 4 - Outbound Call Fails

    Hello Everyone,
    Using CUCM 7.1.5 and Cisco Mobile iPhone app, I set up my boss's iPhone 4 and it registers and can receive calls. I am getting a "Call Failed" when trying to make an outbound call using internal 5-digit dialing. Has anyone set this up? Is it necessary to configure these Application Dialing Rules (and install the COP file for them) that are referenced in the Cisco Mobile Admin Guide? I interpretted those rules as optional, if you want to set up things like bypassing dialing 9 for PSTN access, etc. Shouldn't the internal dialing work since the phone is registered?
    Grateful for any help,
    Kelly

    No, you do not need Application Dial Rules for Iphone to IPPhone calls. ADR are for
    like you said to add a 9, remove the + and manipluate digits.
    I suggest you open a case with the TAC to help you see why you cannot call. Maybe issue
    with ASA or something.
    George

  • Cisco Mobile 8.0 For CME 8.6 : Verification Timed Out

    Hi Guys,
    Good day!
    Anyone tried to implement Cisco Mobile on CME?
    I have followed some guide lines from other forums such as:
     http://www.ccierants.com/2011/05/finally-cisco-mobile-81-supports-cme-86.html
    But I encounter some problems -> Verification Timed Out
    Attached is the logs from CME router.
    Thank you.

    Have you restarted the "Cisco CallManager" service?  Do you have IP address configured under CUCM > System > Servers?
    Thanks!
    Michael
    http://htluo.blogspot.com

  • LR Mobile as Backup for iPhone

    I switched to LR a year ago and pleased with the results. I also recently installed LR Mobile on my iPad and now iPhone. Because I have a legacy file structure I leave my files in my computers file system and import referenced files. I have used Dropbox and Google Plus to backup my iPhone and iPad pictures but with LR Mobile I can turn on auto import which puts the files into a Mobile lrcat file which I don't entirely understand but I believe stores the original files into a lightroom readable file on my desktop computer. Because my desktop is backed up to both an external hard drive and the cloud (plus I backup my LR catalog to Dropbox), I think this means I can stop the Dropbox and Google Plus backups of my phone/iPad even if I subsequently delete the images from these devices. Is this correct? BTW, I really like LR Mobile.

    If you deleted it you can't recover the backup.  If your device is in a known-good state, just back it up again and iCloud will capture it as it looks now can create a new backup.
    If your iPhone is not in a good state and you're trying to restore to the deleted backup, you're out of luck.  But if you backed up to iTunes you would have a copy there, but it could be too old to be useful to you.

  • Mobile 8.0 for iPhone Issues

    I have gotten the Mobile 8.0 up and working and it ws great, now all of a sudden when I exit the program on the iPhone and then go back in, I get an error saying that some services offline with a red phone handest and an orange triangle. To get it to reconnect, I have to reboot CallManager, then it connects again, until I exit the program.
    I am stumped. This worked great when it was working now I am very confused.

    I have the issue, but able to make some phone calls. TAC recommended we upgrade the ASA to 8.2.5 version witch we did over the weekend, but the problem didnt go away. now my IPhone gets an orange triangle then changes to red X with this message "some services offline"
    RR

  • Jabber for iphone with CUCM 8.5

    Hello,
    I did the config on the CUCM for my iphone so now jabber on my iphone is connected succesfuly to the CUCM and everythings works well except desk phone intergration, I followed the process below descripted on the Cisco site but cannot understand the step below (underlined)
    http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_011.html#JABI_TK_E9D245B2_00
    Step 1
    Sign in to the Unified CM Administration portal.
    Step 2
    Navigate to the device page.
    •a. In the Device Information section, click Device Association and search for the desk phone you want to associate with the mobile device.
    (here my question is which device they are talking about? We have device profile for each user and we have mobility on our company and we can connect to any phone on our company with our profile, and in our CUCM I cannot find Device information or Device Association field??
    •b. Select the device you want to associate with the mobile device, and click Save Selected/Changes.
    •c. Navigate back to the End User page.
    •d. Ensure that the Allow Control of Device from CTI check box is checked.
    •e. Select the primary extension for the desk phone you want to associate with the mobile device.
    •f. In the Permissions Information section, add Standard CTI Enabled to the User Groups list.
    For 8900 and 9900 series phones, also add Standard CTI Allow Control of Phones supporting Connected Xfer and conf.
    •g. Note the user ID of this user for use later in this procedure.
    •h. Select Save.
    Step 3
    Navigate to the Device Information page for the desk phone you want to associate with the mobile device.
    •i. Verify that the value for Owner User ID is the correct end user.
    •j. Ensure that the Allow Control of Device from CTI check box is checked.
    If this option does not appear in the Device Information section of the Phone Configuration window, the phone does not support this feature.
    •k. Select Save.
    Step 4
    Navigate to the Cisco Dual Mode Device for iPhone page.
    •l. Verify that the value for Owner User ID is the correct end user.
    •m. In the Product Specific Layout Configuration section, for CTI Control Username, enter the user ID from the End User page.
    •n. Select Save.
    Step 5
    Navigate to the Directory Number Information page and verify:
    the Allow Control of Device from CTI check box is checked
    the Associated Devices box displays the desk phone and the mobile device
    Step 6
    Restart the mobile device and the desk phone.
    Thanks for your help
    Bel

    Hello,
    By 'Use Mobile Network' I am assuming that you want to transfer the VoIP call to GSM using the Mobility Softkey on the iPhone.  There are a couple of defects that you should be aware of when using this functionality:
    1) CSCtu15500 - Call drop after user handoff VoIP call to mobile using Anyconnect (VPN)
    2) CSCty91386 - Client can't handle send-to-mobile message
    Workarounds:  For the first defect, if you are using AnyConnect (VPN), please try transfer to mobile, with out using VPN.  The the second defect, you must use the US English as the User Locale.
    HTH,
    --Vincent

  • Tapi Monitor Cisco Mobile 8.0

    Hi,
    One question regarding of Cisco Mobile 8.0 (on iPhone) monitoring.
    We have a Nice integration (passive record) to perform call record with CUCM 8.0.
    Nice is using Tapi to monitor all the phones. We'd like to record also Mobile Phone.
    Unfortunately Cisco Mobile 8.0 (TCTXXXXXXX) is not recognized as a TAPI monitored phone.
    I did the association between the application user and the TCT Device and then I launch TapiMonitor.exe to check if the device is under control, this one is not present in the list.
    Somebody know why  ?
    How is possible then to record calls made from this kind of Device ?
    Thanks
    Fabian

    You enter the port number against the 'LDAP Server' field of each TCT device you create per iPhone. The admin guide says:
    For the LDAP server, enter the hostname or IP address and port of your
    Active Directory server. Global catalog must be enabled, so use port
    3269 for secure (SSL) connections and 3268 for nonsecure connections.
    Use the format YourDirectoryServer.YourCompany.com:portnumber.
    By default, if you enter no port or SSL settings, Cisco Mobile attempts an SSL connection to port 3269.

  • HT201328 Hello. I sent a request for iphone unlocking:

    Hello. I sent a request for iphone unlocking:
    Status of your ATT Mobile Device (Phone or Tablet) Unlock request
    IMEI Number
    012646004628828
    Request Date/Time
    01/06/2014 10:08 PM
    Request Number
    6673769
    Current Status
    ATT Mobile Device Unlock Approved
    But I can't still unlock it. I updated iOs, I restored data, but iphone isn't unlocked. On a site http://iphoneimei.info/ phone statute "locked". What shall I do?

    Generally when you receive an email from AT&T about an unlock, it will tell you if the phone has been unlocked and then tell you to wait 24 hours before restoring the device to complete the unlock. I'm not sure where you got this screenshot you shown, but if you received the unlock email, then you need to connect the device to iTunes, restore it as new, not from a backup and you should see the message, Congratulations, you iPhone is unlocked, in iTunes. If you restore and do not see that, then you need to contact AT&T.

  • Cisco Clean Access agent for Ipad

    My university uses Cisco Clean Access agent for wifi.
    I have been able to login using the alotted password through Safari, however the next step is a prompt to download Clean Access Agent.
    When I try to download the application, Safari prompts that the file can not be downloaded.
    Any suggestions for this problem so that I can use my Ipad at campus.

    The only things you can download are on the App Store. Check there, but I'm mostly sure that there is no Cisco Clean Agent available for iphone.

  • Clean Access Agent for iPhone?

    My campus wireless can only be accessed if my computer (or iPhone) has Cisco clean access agent installed.
    Is there a download for the iPhone that allows me to connect to the wireless network? Or is there a way around it?
    Thanks.

    The only things you can download are on the App Store. Check there, but I'm mostly sure that there is no Cisco Clean Agent available for iphone.

  • Old iPhone trade in for iPhone 6?

    How do I go about the free iPhone 6 with old iPhone trade in? Do I do this in stores? Do I trade in my old one before I preorder? Do I wait until they are available in stores? Can anyone explain this whole process to me?

        Thanks so much for asking! We knew this would be a hot topic. Don't trade in your phone before you get a new phone. We don't want you to be phoneless.
    You can accomplish with with pre-orders as well as upgrading in the stores.
    Beginning on 9/12, for a limited time, customers can trade-in an iPhone 4, 4s, 5, 5c, and 5s from any carrier with the purchase of a new iPhone 6 or iPhone 6 Plus and receive a $200 gift card (iPhone 4, 4s, 5, 5c) or $300 (iPhone 5s).
    This can be done at the store or you can submit for the device trade in online at http://vz.to/17tYyaN.
    It is imperative that you disable Find My iPhone http://vz.to/1wwKZbR prior to trading the phone in to us to ensure that you get the proper trade in amount.
    The trade-in Apple iPhone must be in good working condition based on Verizon Device Recycling Program requirements:
      • Phone can turn on and off.
      • LCD screen is free of cracks and functioning correctly.
      • Phone and connecting ports are free of visible corrosion and water damage.
      • Battery is present.
      • Phone and charging port are free of cracks and dents, and are not missing any pieces or chunks (not including cords or accessories).
      • For iPhones running iOS 7 or higher, the Find My iPhone feature must be deactivated (turned off) before iPhone is traded in. -Tamara

Maybe you are looking for

  • Boot camp with Cisco VPN client and smart card

    Looking at a Macbook or Macbook Air and the only reason I need to run windows is to be able to access my work network through the Cisco VPN client and my Smartcard then use remote desktop. From my understanding if I run Bootcamp it should work am I c

  • How can I see the interface in Japanese, French, German, Spanish, or Simplified Chinese?

    In order to see pages in these languages, you can click the Region links at the top of page (where it lists a country name and says "Change"), choose your region and language from the pop-up menu. Click on "Remember this choice" under the menu.

  • Why did my replacement iPod Touch come with iOS 4.3.5?

    My other iPod wasn't working so I got a new one but this one comes with iOS 4.3.5? Why did that happen? And it is slow too, is that from 4.3.5 too? Should I update or no? Cause I had battery issues on 5.1.1 on my old iPod and I don't want that happen

  • Quicktime Movies Suddenly Not Working in Safari

    All Quicktime movies on my website suddenly show the "?" when I try to play them. A sample page is: http://www.ibcdigital.com/commercials.php I am running Safari 5.0.4 on OSX 10.6.6 on a new laptop. I have the Quicktime 7.6.6 plugin installed. Everyt

  • EMAIL NOTIFICATION ISSUE AFTER BATCH RUN

    Hello All, I am having a problem getting email notification after our batch run in FDM. This is the following error on the task manager: Failed--2147220975 -  The message could not be sent to the SMTP server. The transport error code was 0x800ccc6d.