Cisco Mobile 8.0 No incoming calls to iPhone

I am trying to use cisco mobile 8.0 iphone, I am able to register the phone with CUCM, also able to call other SCCP device connected with CUCM. However when call get connected, I can’t hear anything from SCCP device but the SCCP device can hear the voice from Iphone(SIP device). And also I can’t make outgoing call to iphone(SIP) number from SCCP device. Am I missing something?
I am using CUCM 8.0.2 and iphone 4 with 8.0.2
Thanks

The one-way loss of audio is a routing or firewall issue. Check to ensure that the path from the SCCP phone is not obstructed and routable to the iPhone.
As for incoming calls to the iPhone, is the program running in the foreground? The current release does not support multitasking.

Similar Messages

  • Can you block a incoming call on iPhone 4s

    Can you block a incoming call on iPhone 4s?

    Call blocking is a carrier feature. In the U.S., most major carriers offer blocking features. Give yours a call.

  • In incoming call, why iphone 4S (ios 7.04) sometimes gives option to decline the call and sometimes not?

    In incoming call, why iphone 4S (ios 7.04) sometimes gives option to decline the call and sometimes not?

    Try to do this experience.
    Ask a person with a block phone to call you and the option to reject doesn´t appear. Try with a non-blocked phone and the option of reject appears.
    I think it´s an iOS 7 problem.

  • How to show company name and contact name on the incoming calls of iPhone 4

    Kindly provide me with a useful solution of how to show company name and contact name on the incoming calls of iPhone4.
    even with an application or from the setting of the iPhone itself, but without telling me a solution like writting the company name in the contact name field.
    This is a very important option, i think it is a must, not an option and apple should fix this problem fastly. because it is already available in the older models of iPhone like iPhone 3G and 3GS.
    How an important feature like this could be available in old models, but in the later models is not available?

    Currently not possible without putting the company name in the contact name's field.  AFAIK, it's never been available on any iOS version.
    You might check the App Store for an app that can do this although I'm pretty sure you won't find one.
    http://www.apple.com/feedback/iphone.html

  • How Can I Restrict Unwanted Incoming Call in iphone 4

    How Can I Restrict Unwanted Incoming Call. Help Me

    Your carrier might be able to help you but there isn't a setting on the phone to do it.

  • How to block incoming call on iphone

    how to block incoming call on iphone

    Contact your carrier & see if they offer call blocking...some do, some don't. There is no other way to block calls on any cell phone.

  • How to disconnect incomming call on iPhone 3GS with 4.3.2

    I'm using iPhone 3GS but unfortunately I have no idea how to disconnect the unwanted incomming call.
    Please guide me...!!

    Ummmm, do not answer the call.
    Or do you want to know how to block certain calls?  That is a carrier function.

  • Cannot hear incoming calls on iPhone

    I have ab iPhone 4S which I purchased in July 2012.  I had a problem last month whereby I couldn't hear incoming calls.  I purchased the phone through my network provider 3 and on the 29 October they replaced the SIM card.  It has worked up till now but the same problem has occurred.  Can anyone help me please?

    Hello Christorro
    Continue your troubleshooting with the article below to help resolve the issue of no sound from the receiver.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • Facing problem with incoming calls in iphone 5

    When a caller calls for second time within 10 seconds, the call is rejected saying that the user is not reachable.
    This is not the carrier problem for sure, as I tried using other phone and dint find the problem.
    Is this some known bug/feature???
    Any help is appreciated
    Thanks.

    I have not seen this type of behavior before. Let me get this correct, you say that if someone calls your iPhone 5 after just calling it within 10 seconds, they get a message stating "user is unreachable"?
    What troubleshooting have you done with the iPhone? Restart (power off/on) and reset (hold the sleep/wake and home buttons together until you see the Apple logo and then release) the phone restarts, are the first two steps.
    You say you tried this by calling another phone and it did not react like the iPhone?
    This is not something I would say is a bug/feature. It may be something with your particular device. Suggest trying the troubleshooting, otherwise, connection issues are generally resolved by the carrier. You might have them check to ensure your account is provisioned correctly.

  • Cisco IP phones with only incoming calls not outgoing calls

    The problem in one of our client place where we implemented the Cisco IPT using Cisco Callmanager 4.1 running on MCS 7800 server with the IP phones being used over there are 7940G, 7912G. is that sometimes the phones are unable to call outside but they can receive calls from outside. When on the Cisco CallManager Administration web console reset the gateway (by going to Devices> Gateway, then check the box next to the gateway and click reset) the outgoing calls can be performed again.
    Where will the problem be either in callmanager or the voice gateway router 1760?
    Please let us know the solutions to this issues asap.
    Thanks
    swamy

    I would check the IOS version you are running, first off, and use Bug Tool or downloads to see if there are VOIP issues with the Feature Set or Train you are using. I know from the past, I personally had MANY problems with the 1760 router platform and had to try several IOS Ts to find one that worked consistently. The other thing you ought to look at is whether it is an MGCP or H.323 gateway. I would suggest redeploying as an H.323, as it can be a bit more manageable. The difference is:
    MGCP => CallManager controls dial plan with Part / CSSs
    H.323 => the router control dial plan with dial peers in IOS
    HTH,

  • Hi everyone!  I have a problem with incoming call on Iphone 4 32Gb.

    By an entering call phone blocks the bottom part of the touch screen and doesn't allow to me to take the call. It happens in 3 cases from 20. I have this problem on 4 different Iphone 4 32Gb.
    In the service center confirm my problem and say that phones aren't suitable to repair! It happens already with 4 under the account phone!
    Phone is synchronized with MS Exchange Server 2010 on technology Exchange ActiveSync. Mail, contacts, a calendar is synchronized. Function Push is included.
    At me also is Iphone 3Gs and Iphone 3G. With them such problems never arose!
    Can be at someone there was a similar case?

    hey buddy i sometimes have the same issue on the iphone 4 16gb.. it doesnt let me answer a call.. i just lock/sleep the iphone and unlock/wake the phone and that fixes it.. dont know y it happens but locking and unlocking help so..

  • Not getting incoming calls on iphone.

    Hi,
    I am facing a peculiar problem with my Iphone, which is I am not able to get incomig calls on a perticular cell netwok I am able to make out going calls, It works fine with changing my sim to other nework can any one help on this.

    I would go to the provider and ask for a new sim-card.
    Message was edited by: AppleinWien

  • Cisco SPA504G - no incoming calls

    i'm not able to set up a cisco spa50x device to receive incoming calls.
    the device is connected directly to the internet (no nat/fw/proxy) with a dedicated IP, outbound calls work just fine, the inbound number is mapped correctly via skype manager, all ports are correct.
    any hints?
    thanks

    Hello thenarban,
    You have a very good device that has some good reviews.  The first place to start is probably at www.Cisco.com/support.  I'm sure they have had this same problem in their support archives to help you with.  Skype hasn't seen this perticular problem before on this device.
    One thing you might want to check is that if you’re trying to set up separate lines, you’ll have to change the line appearances to correspond with the different SIP registrations, or else the phone will register all 4 lines under the first SIP registration. 
    The second thing is to check that the Skype Online Number is configured in the set to appear on one specific line too. That may be the problem.
    The third thing to check is, are you using this behind a PBX? If so, you need to configure that line in the PBX to target that extension. 
    Each of these items can be checked locally by you.  (If anyone is using this same set, and had this same problem getting it setup, please chime in).
    If you are still having problems, you can come into our Live Chat by logging into your Skype Manager and clicking on the Chat Button in the top right of that screen.  We are here and available to you 24/7 for your support.
    Thank You for using Skype and the Skype Community Forums.
    Regards,
    Victor S.
    Regards,
    Victor S.
    Skype Enterprise Support

  • Cisco mobile does not running in the background ont my ipad

    Hi
    I have a Cisco Callmanager 7.1.5, an ASA5510, an Iphone and an Ipad
    I have configure the VPN on my iphone and my ipad and I can make a VPN connection to the ASA through the WIFI
    I have configure the  Cisco Mobile 8.1.2.3245 on my iphone and my ipad.
    If the application is open, I am connected to the CCM and I can make and receive calls.
    On the iphone when the application is  running in the background, its good I can receive calls
    On the ipad when the application is running in the background, I can't receive calls, I am unregistered
    On the ipad, if I disconnect the VPN, and make a WIFI connection on my local network. When the application is running in the background, I can receive calls.
    It is an ipad2 with iso 5.0.1 (9A405)
    I reverse the ID of the IPAD and IPHONE, and it is the same.
    The problem is only on the IPAD when there is my VPN connection
    Could you help me?
    Thanks
    nicolas

    A double click on the Home button will reveal a tray containing all apps that are currently running (suspended?).
    Side swiping this will reveal as many as are active, with a swipe to the right when on the first display will reveal further controls for the iPad, mainly relating to the iPod part, but also containing a screen lock option I believe.
    Click and hold any one of them till they 'jiggle' and show a - you can then click this to remove it, relaunching the app as required in the normal way.
    Regards,
    Colin R.
    Message was edited by: Colin Robinson
    PS Tap the Home button once to get out of this mode.

  • HT2404 in incoming calls how to display company name with name

    Hello
    How we can get display of company name along with name while receiving incoming calls in iphone 4.
    Thanks

    actually according to this, t-mobile became the first carrier to offer the paid feature in 2011
    http://www.geek.com/mobile/t-mobile-becomes-first-major-us-carrier-to-add-caller -id-feature-1402597/
    i don't know if anything changed with verizon after 2011, but i don't see any such feature on their website. I know you can set/remove your own name that is displayed to others, with verizon. but i cant' specifically find this incoming name feature.

Maybe you are looking for

  • HT4413 I migrating from my macbook to new imac. nothing showed up until I turned off the imac but everything I had done previously on the imac disappeared.

    I was migrating from macbook to a new imac. Nothing showed up until I turned off the imac. When I restarted the imac everythign I'd previously done was gome and the migrated macbook desktop had taken over. How do I bring back the original imac settin

  • IP Address agregation- SGE2010P

    I have a SGE2010P and I would like to konw how to agreggate an ip address to a port.  Ex...force the IP address 192.168.0.1 use the port g01 only, if another computer using the same IP try use another port the switch must block that.  The intention i

  • [JSF] How Do I set the image's ID.

    Hi All!! Im nab. Im Japanese and new of JSF.. plese give me some advice about ID. <h:dataTable value="#{Multi.class}" var="item" rowClasses="odd_row,even_row" columnClasses="" > <h:column> <h:selectBooleanCheckbox id="class0" value="#{item.selected}"

  • Material issued for Production order

    Hello Friends, Is there a report in SAP that gives the quantity of material with drawn for  a production order. Eg: When run by a part number ...report should give the production order number and the quantity withdrawn. COOIS when ran by component nu

  • Reciver determination-Condition error

    Hi Friends, in my idoc to file.. I am gettinfg this error while clicking Condition editor in reciver determination. <b>Message interface does not exist in any software components installed on this business system</b> i came to know that this error is