Cisco Model 870 router for home office connected to WRT160NL wireless router for personal use

I am using a Cisco Model 870 router for home office. I just bought a WRT160NL wireless router for home use. I setup the personal wireless router off the personal port of the 870 and can connect with my PC but not with my MAC machines. It can see the Network but when it asks me for passwords, it says they are wrong, which after several attempts I know they are correct.
The new router is setup as WPA2 personal. Can you advise?
Cisco Account Manager- Services

I think I answered my own question. I tried downloading something on my desktop and checked my cellular usage afterwards didn't go up so it's using my home internet and not my data plan.

Similar Messages

How to connect a E1200 wireless router to a machine tool network for wireless communications

Hello all, I am new to the forum, hope someone can help me out. I am wanting to connect my E1200 wireless router to a machine tool in our factory that has programmable controllers and is connected to the machine components via ethernet connections. This is so we can troubleshoot the machine without having a wired laptop. We have several ethernet switches on the machine and a range of IP addresses say from 192.16.1.1 through 192.16.1.150, and 192.16.17.1 through 192.16.17.150, all of the addresses are not used but random addresses in the range. I would like to be able to connect my E1200 to either one of the networks without having to make a change in the router setup. I can make it work on either network but when I switch my cable to the other network it has to be reconfigured. I am currently connecting my data cable to a ethernet port on the router and changing my router address from 192.168.1.1 to 192.16.1.1 and selecting a range of 150 so it will assign numbers as needed. This works great until I change to the other network and I have to change my router address to 192.16.17.1, I know this can be done on some routers because the technicians from the machine builder use them when working on the machines. thanks

On the basic setup tab make the changes shown below:
This basically make the router disappear off the existing networks and turns it into a wireless AP.
Then when you set your laptop's wireless adapter to whatever IP network you want to connect to.
If you need to connect to your router again change the laptop's adapter IP to something like 192.168.200.2
Keep in mind nothing ever gets plugged into the Internet Port on the router.
What I do with these manufacturing machine's is put them on the company network with static IP's. Then so operators can transfer programs and view drawings I place ELO touchscreens at each location. For the Laser cutter operators that do nesting they have a desktop workstation for the CAD software and put the nests on a network share or direct to the laser cutters.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

What is the best software for home office for mac pro ?

What is the best software for home office for mac pro ?

Mac-HaBu X 12.2.0.3.841
Gnucash 2.4.11
QuickBooks Pro 2013 14.0.3 R4
MoneyWorks Gold 6.1r5
MoneyWorks Express 6.1.r1

Here's my dilemma...my iPhone will connect to my wireless router in the room where the router is located but won't outside if the room ie my living room for example...any suggestions??

Here's my dilemma...my iPhone 4 will connect to the wireless router as long as I am in the room where the router is located but won't if I'm in a different room...any suggestions?

iPhone 4 does not support 5 GHz
In that case I would manually change the channel the 2.4 GHz is broadcasting.
MacBook Pro, Mac OS X (10.8.2) 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop8.0 iPhone5_iOS6.1

My HP OfficeJet Pro 8600 won't connect to my wireless router

This is bizarre. I have had my HP OfficeJet Pro 8600 for about 6 months. It has generally worked fine, and we have used it wirelessly only. But now it refuses to connect to the router. It can FIND the router, and it can find other networks in the area, but it won't connect to the router. I ran the Wireless Network Test, and the results say:
Wireless On - Pass // Wireless Working - Pass //
Network Name (SSID) found - Pass // Wireless Networks Detected - 9
Printer Settings Consistent with Wireless Router Settings - Pass / No Filtering - FAIL //
So it recommends solution as follows: "1 If MAC Address filtering is enabled, and you would like to keep it enabled, you must add the Mac address of your printer to the list of permitted devices for your router before continuing."
Except, guess what, I don't have MAC Address filtering enabled. I wouldn't know how to do that, much less check for it.
Also, before today, this was never a problem. HELP!
Thanks....
If you are interested, here's more detail and background.
Before today, the only problem we have had is that frequently our Apple laptop (OS X 10.6) has trouble connecting to the printer. This has been odd because the printer is connected to the network, and so is the laptop, but the laptop can't find the printer - it thinks the printer is "offline" (even though it's not). Usually, if I wait a while, it will find the printer, and it will resolve itself work fine. If not, we sometimes have found that it can fix itself if you restart the laptop -- restarting the printer does not make a difference. In fact, I did exactly that today, and it resolved itself. And I printed. Fine, right?
But then I wanted to do more printing, and the problem of the laptop not finding the printer came up again, so I decided to really "get to the bottom of this." I don't remember exactly what I did, but somehow I was persuaded by the online help, that the correct solution would be to go into my System Preferences / Print and Fax, and click on the "-", which de-installs the printer, with the idea of re-installing the printer. But then when I tried to re-install the printer, it could not find the printer. Ugh! Wierdly, it found an 8600 Scanner, but not an 8600 printers. After installing and de-installing the 8600 scanner a few times, I eventually deinstalled everything, and I decided to start from scratch. I got my HP disk, and installed all the software again from the beginning (even though it was already there), and then it looked for my printer, but couldn't find it. So then I got a USB cord, and plugged that in.
So, now I have a situation where I do have a working printer via the USB cord, but no wireless connection at all. In particular, since the Office Jet Pro 8600 won't connect to the router, I don't know what else to do. My Apple MacBook pro is 2 feet away from the printer, and it is connected to the router just fine (as is my blackberry), and I have never before had a problem connecting to the wireless router by the printer.
Any suggestions?

There are two things that can trip the mac filtering test to fail: actual MAC address filtering setup (sounds like this is not the case) and using wireless channel 6 or automatic for wireless channel in the wireless network settings (in the router). Since it does show failed for MAC filtering and you do not use this option, try changing the wireless channel in the router to 1 or 11. Those two channels provide the best compatibility with printers due to less interference. Almost everything defaults to auto or 6 for the channel and this causes a lot of interference. This change should not affect anything at all. To do this, you may need to contact the router manufacturer as the process differs from router to router.
What brand and model is the router?
Has anything in the network settings changed at all?
What version is the Mac OS X? There may be additional steps to take as it sounds like there are two separate issues involved and this could be revisited later.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Since upgrading to Mountain Lion I cannot connect to my wireless router

Since upgrading to Mountain Lion I cannot connect to my wireless router. I have 2 wireless networks in my home. One is the primary whuch all of my devices connect to. The other is for backup only. I cannot connect to the primary with my iMac but have no trouble with any of the other devices which include iphones and ipads.phones and iPads. I can however connect to the backup without a problem. I have tried upgrading the firmware of the router as well as changing the security from WEP to WPA-2, no luck. Can anyone help?

Try this, it's for information.
In Finder, open the Go menu, press and hold the option key, 'Library' will appear on the menu, click and scroll to Application Support, open the folder and scroll to 'AddressBook-v22.abcddb'. Click on the file and press Command-I. Towards the bottom you'll see Permissions, tell me what they are please.

Will a desktop connected to a wireless router via network cable be able to use a wireless printer?

My computer is a Dell runing XP home edition. This computer is connected via a network cable to the wireless router.
My deskjet 4580 printer is connected to the wireless router network and printing and scanning via wireless network with a laptop that is connected to the network wireless.
Now I want to print and scan using the desktop computer also. Should I install the wireless driver for the printer? Do I need to connect the printer with USB cable with my desktop computer?
Please help. I do not want to disturb the laptop that can print and scan wirelessly with the printer.
Thanks.

if the printer is connected to the router wired, then the router is the hub, so you should just need to install the driver for the printer in the machine that is not working.
If you install the full feature driver to the printer on the computer you want to print via wired to the router to the printer that should work. Run this too:
HP Print Diagnostic Utility
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&lang=en&softwareitem=mp-91788-1
Signature:
I currently work on behalf of HP for numerous support departments. The opinions expressed above are the personal opinions of myself, not of HP. There is no guarantee that the opinions expressed are 100% correct.

My ipad nor my iphone will connect to the wireless router, and i have no internet connection

In my previous place I had all my Mac Book, iphone and iPad connected through the wireless router. Now in my new place my macbook is connecting occasionally, and my iphone and ipad are not connecting at all, although in "settings" it looks that they are, but when I open the browser it says "safari cannot open page because it is not connected to the internet" What is wrong?

nandasaboia wrote:
The networks show up, but since I haven't been able to connect, I don't get the "forget this network" option.
Yes, other users are iphone users.
Where the network shows up settings >>>wifi >>>Office network >>>click the small i in a blue circle click and you will find option to forget network

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.

Satellite Pro L300-1B9 cannot connect to my Wireless router

Hi!
I have activated the wireless nw on SAT L300 PRO 1B9 - but with many fight...
First I needed to find the switch to enable (I never though that it have... :-) ).
Then I needed to deinstall Atheros in Windows, and set the flags on (enable) in the Windows driver.
But in both Linux and Windows I couldn't connect to my Wireless router.
My luck was that some of my neightbours have security-disabled, open wireless network, what I could map to test.
The test was succecfully with that network, but my wireless router was unreachable.
From other machine I could reach it.
The result was:
If I set the router to broadcast the SSID, both OSs (Ubuntu + Windows) can use wireless network.
But if I disable the broadcasting (to protect my router), the network driver cannot use my router, it does not matter I pre-set the SSID...
A router is WRT54G, and it is working with other computers if I hide the SSID, but with SAT L300 Pro cannot connect (with this option).
Do anybody knows why? What I need to do to I could hide the SSID from the bad guys?
Thanks for any help!
Regards:
dd

I dont know which Windows OS do you use but if you use original Vista, I think, right WLAN driver is part of the package. So WLAN card must be installed properly.
It is not easy to say what is wrong there but if the notebook can see and detect your WLAN network on notebooks side everything must be OK. Try to restart your router and check all settings.
In my opinion there is some problem with WLAN settings.

Hi everyone, I have an old g4 desktop it runs on 0S 10.3. I want to get connected to my wireless router but I am getting a bit confused on what I need to buy to do this. I have looked on ebay at pci cards, usb cards

Hi everyone,
I have an old g4 desktop which runs on osx 10.3. I want to get it connected to my wireless router but I don't know what I need to buy to do this. I have tried a usb card which did not work. Do I need a pci card or an airport extreme card?
Many thanks,
Acphot

To build on what Tesserax says, not all USB sticks will work on Panther, but here is one that does:
http://eshop.macsales.com/item/NewerTech/MXP3802NU2C/
I have one of these and it works with both a PowerMac G4 running Leopard and a 1998 PowerBook G3 running Panther.
And here's a little more free advice.
Some of the older G4 desktops like my PowerMac 3,6 only take the original AirPort card, which is different from the newer machines that take the newer AirPort Extreme card. Both are available if you hunt for them, but modern WPA-2 encryption is not supported on the original AirPort card, so it will not be able to join your network if it has this encryption. The newer AirPort Extreme airport card does support WPA-2 encryption, as does the NewerTech USB AirPort stick. If your G4 takes the older card, you cannot plug in the newer AirPort Extreme card. I have not looked lately, but I believe the sockets themselves are different. In any event, the NewerTech USB stick is cheaper than an AirPort card.
If you don't already have Mactracker, you can download it for free here:
http://mactracker.ca/
You can look up your Mac on it and see which AirPort card it has. You can also check out what upgrades are available.
A couple of good things to do is to max out the RAM and upgrade the OS. OWC will have the RAM and they are very knowledgable about Macs and can advise you on any hardware upgrades they offer. You would probably have to look at EBay to find a retail disc for upgrading to Tiger or Leopard, and preferably the latest version of the OS that is supported. Panther has some limitations, and I beleve that Google no longer supports Panther so you might need to find a different browser if you stay with Panther.
Good luck!

Connecting to a wireless router

I have an older wireless router, the DLink DI-714P+ connected to a DSL modem, and would like my Satellite Pro L300D's wireless LAN to connect through it to the Internet. I do not see any instructions how to use the Atheros 802.11b/g wireless LAN on the laptop.
My router does have settings for wireless LAN and supports the 802.11b wireless network. The D-Link settings for the wireless access point are network ID(SSID), set to 'default', channel, set to '6', and security, set to 'None' with options for 'WEP','802.1','WPA-PSK', and 'WPA". There is also a page of wireless performance settings I can set in the D714P+ setup.
Any help hooking up my laptop to my wireless router so that it can access the Internet through the router would be most welcome. Thanks !
Solved!
Go to Solution.

eldiener wrote:
I have an older wireless router, the DLink DI-714P+ connected to a DSL modem, and would like my Satellite Pro L300D's wireless LAN to connect through it to the Internet. I do not see any instructions how to use the Atheros 802.11b/g wireless LAN on the laptop.
My router does have settings for wireless LAN and supports the 802.11b wireless network. The D-Link settings for the wireless access point are network ID(SSID), set to 'default', channel, set to '6', and security, set to 'None' with options for 'WEP','802.1','WPA-PSK', and 'WPA". There is also a page of wireless performance settings I can set in the D714P+ setup.
Any help hooking up my laptop to my wireless router so that it can access the Internet through the router would be most welcome. Thanks !
Hi,
Satellite Pro L300D series is wifi capable . Here are the things that you need to do to connect to a wireless router.
. Check if Wireless Switch is on ( for this system the on / off switch is located infront of the system aligned to the Audio jack )
. Click Start then go to Connect to
. Look for the name of your Router and Double click it.
Once it says connected. Try opening up Internet Explorer.
That should help you out connect to your router
"I'm Not the Message... Just the Messenger.. i Don't Play the Music... The music plays through me... Im just a Channel..... That's all I AM "

Linksys wireless router connected to BT wireless router

I have my linksys wireless connected to another wireless router through lan cable.Internet connection regularly drop down.can I do something about it or what setups I have to do on my wireless router so both routers works without conflict.

Let me know the Model Number of the wireless router ....

When you can use Airplay without the need to connect to a wireless router?

My question / request is, when you can use Airplay without the need to connect to a wireless router? Able to connect your iphone / ipod touch / ipad to your Apple TV directly without a wifi router, something like a "Airplay Direct"

This is not supported. Speculation about upcoming Apple products or features is prohibited by the Terms of Use of this forum.
Feedback to Apple goes here: http://www.apple.com/feedback

Trying to connect IPAD to wireless router

Help & advise needed. I have been trying to connect to my wireless router. I can see my network in the IPAD and when I try to join and enter my password it give me a message " incorrect password". I have reset my router 2x now and created new user & password ID.

I am having the same problem. It is very frustrating. My lap top connects to my router just fine and my iPad can connect to other routers with no problem. PLEASE help us!

Cisco Model 870 router for home office connected to WRT160NL wireless router for personal use

Similar Messages

Maybe you are looking for