Cisco Modem Firmware (HWIC) upgrade Process

HI experts,
I need to upgrade firmware of my LTE ( Hwic) module for the router 2901. I am wondering if this is the part of IOS upgrade process , I mean ones I upgrade IOS to the latest version will it upgrade my modem firmware by own or I need to upgrade LTE modem separately?
can you guys please share your experience here?
any docs on this please?
Thanks!

Hi,
The LTE module is part of main Cisco IOS you load into the router. Once you upgrade the IOS, it also applies to the module.
ntegrated 4G LTE WWAN broadband: With the 4G LTE WWAN modem integrated into the router, you gain the benefits of simplified installation and management. In addition, the Cisco 4G LTE WWAN EHWICs are tightly integrated with Cisco ISRs, which run the industry-leading Cisco IOS® Software, giving access to all the advanced features of Cisco IOS Software such as quality of service (QoS), intelligent network queuing, and robust security.
Link:
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/4g-lte-wireless-wan-enhanced-high-speed-wan-interface-card/datasheet_c78-710314.html
HTH

Similar Messages

Iphone 3GS Modem Firmware 5.16.05

I upgraded my Iphone 3gs to Ios5 and I didn't know that the modem firmware also upgraded to 5.16.05. I then downgraded my os to 4.3.1 hoping that the baseband would also downgrade. Never thought it would be irreversible. Now i can't unlock my phone.:( I need to upgrade my modem firmware to Ipad baseband for me to unlock my phone. Well i read that if i upgraded to 6.15.00 it will affect the GPS of the phone. Any other solutions for this? Thanks guys!

Downgrading the iOS is NOT supported at all, and also voids your warranty. You cannot get help on this forum per the Terms of Use. You'll have to look elsewhere for help.

Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help

Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.

Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?

Does restoring iPhone to existing OS 4.3.3 upgrades modem firmware as well?

Does restoring iPhone to existing OS 4.3.3 upgrades modem firmware as well?

Those options don't exist for the iPhone. You can only restore to the most recent version (without doing some acrobatics outside of iTunes).
But the overwhelming majority of iPhone users have no problems with 3.0, and the few that do can almost always fix it. But the ones who can't are naturally (and justifiably) quite vocal.

Cisco meeting place 8.0 upgrade media download or PUT and upgrade process?

Hello all, I have been given the task to upgrade our cisco meeting place sever version 8.0.1.3 on both the app server and web sever.
We have a valid UCSS and I would like to go to version 8.5 Is this something I can order via PUT or can I download one of the upgrades I see on cisco's website?
Also I'm a little confused on the upgrade process. I've read another post that I have to export the exsisting data then do a fresh install of 8.5 then import the data..... Is this true?
Thanks,
Dan

Hi Playne,
It depend what kind of deployment is running right now. Please read this article:
http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/8_5/english/administration/migrate_matrix.html#wp1031995
From Release 8
For complete information on compatibility requirements for Release 8.5, see the Compatibility Matrix for Cisco Unified MeetingPlace Release 8.5 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_device_support_tables_list.html.
Table 5 Migration Process For Different Deployments From MeetingPlace Release 8.0
FROM
Current System
TO
Audio Only
TO
MeetingPlace Scheduling
MeetingPlace-Driven User Management
TO
WebEx Scheduling
MeetingPlace-Driven User Management
TO
WebEx Scheduling
WebEx-Driven User Management
Audio/Video Only
Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
Not supported
Not supported
Provision a new Cisco WebEx site.
Migrating Using the MPtoWebEx CSV Converter
Meetings are not migrated. Keep your existing system to play existing recordings.
MeetingPlace Scheduling
WebEx Conferencing
MeetingPlace-
driven User Management
Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
As required, coordinate with your Cisco WebEx CSM to upgrade to the Cisco WebEx WBS27 SP27 or later Release.
Not supported
Provision a new Cisco WebEx site.
Migrating Using the MPtoWebEx CSV Converter
Meetings are not migrated. Keep your existing system to play existing recordings.
WebEx Scheduling
WebEx Conferencing
MeetingPlace-
driven User Management
Not supported
Not supported
Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0 module
As required, coordinate with your Cisco WebEx CSM to upgrade to the Cisco WebEx WBS27 SP27 or later Release.
Provision a new Cisco WebEx site.
Migrating Using the MPtoWebEx CSV Converter
Meetings are not migrated. Keep your existing system to play existing recordings.
WebEx Scheduling
WebEx Conferencing
Webex-driven User Management
Not supported
Not supported
Not supported
Migrating from Cisco Unified MeetingPlace Release 7.x or 8.0
As required, coordinate with your Cisco WebEx CSM to upgrade to the Cisco WebEx WBS27 SP27 or later Release.
Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
LinkedIn Profile: do.linkedin.com/in/leosalcie

C887VA modem firmware via SNMP

The dutch isp KPN started to enroll VDSL vectoring, the problem is that several dsl-modem firmwares, embedded in the ios, don't support vectoring.
In the best case this means the line will train in on ADSL instead of VDSL but there are also a couple of firmware versions which are blacklisted and then the router will no longer establish a connection at all, so not via VDSL and not via ADSL.
I'm trying to use snmp to read-out the current firmware-version of the dsl-modem in the 700+ cisco 887va(g) routers we manage, but I can't find the oid. Does anyone know if this oid exists and if so, what the oid is...?

I'd like to use my own script to do the upgrades. Which would be easy to do with SNMP if I new the right OIDs to set...
Don't have WLSE or CiscoWorks RME.

Cisco Prime 1.3 Upgrade Hangs

I'm trying to upgrade our Cisco Prime 1.2 to 1.3. When I complete the command to upgrade, it then asks if I want to save the current ADE-OS to the running configuration. I say yes and it saves it. Then it begins the upgrade process. I get:
Initiating Application Upgrade...
Stage 1 of 7: Transferring file ...
That is where it is stuck at. I have looked at the server I have the upgrade file on and it shows the transfer. The transfer has been running for close to an hour.
Any thoughts or ideas why it would hang here?

Please check the link below to download the software as I feel the steps you are following is correct and you may try to do it again downloading this software. Might the software is not downloaded proper.
http://software.cisco.com/download/release.html?mdfid=284652876&flowid=38562&softwareid=284272933&release=1.3.0&relind=AVAILABLE&rellifecycle=&reltype=all
even for step by step installation.
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.3.1/release/notes/cpi_rn_13_update1.html#wp99493

Cisco 5508 Firmware update 6.x 7.0.98 Questions

Hi guys,
Have not done an update on any cisco gear since about 2001
We have a cisco services contract with IBM that supplies us access to the usb drivers, firmwares etc, and we have a Cisco 5508 6.x running ~30 Cisco 1252's, some 1231's and (potentially) some 1262's once the firmware update is done.
We have a base-count license(permanent) of 50AP's, no expiry
So I guess my questions are:
1) When flashing the new firmware - do the licenses require any sort of modification, or will they work as per normal
2) Are any serial numbers or codes required to be entered once the 7.0.98 firmware is installed?
3) I assume that the old firmware/config becomes 2nd in line to the primary boot option of the firmware during boot process?
Thanks

7.0.98.0 is deferred code.
Browse to deferred release on bottom:-
http://www.cisco.com/cisco/software/release.html?mdfid=282600534&flowid=7012&softwareid=280926587&release=7.2.110.0&relind=AVAILABLE&rellifecycle=ED&reltype=latest
Deferral Notice:-
Wireless Lan Controller (WLC) software version 7.0.98.0 is being deferred due to the following issue :
CSCtj21464 - WLC data plane core crashes, causing WLC reboot
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html
5500 supports 7.2 code but AP 123X is not supported on 7.2, And 126x supported from 7.0.116.0 code. it is suggested to update to 7.0.235.0.

DMM 5.3 upgrade process failing

We are running the Digital Media Manager version 5.2.3 on a UCS-C210.
I have attempted to upgrade to version 5.3 twice, but each time the process is failing.
I have downloaded the ISO and burned to disk, backed up the system and kicked off the upgrade. It states it completes, informs me that I can eject the disk and reboot the system. However I have discovered I've been having to manually shut the server down and restart it, but it boots up into 5.2.3.
Is there something I am missing?
Thanks much.

Paul,
I assume that you were connected to CIMC, KVM or Physical Monitor/Keyboard when the remote upgrade was triggered. You do have to select few options when the remote upgrade happens, The only thing you avoid in remote upgrade process is - burning the DVD and inserting it in the drive.
I'd recommend that you setup CIMC (SETUP instructions :
http://www.cisco.com/en/US/products/ps10493/products_configuration_example09186a0080b10d66.shtml)
or KVM and open a TAC case, TAC can see where exactly the failure is happening.
I assume that you have already backed up 5.2.3's CONFIG+CONTENT before starting the upgrade to 5.3. The sysmptoms described in this thread are vey unique and would need deeper investigation.
Also once the device is UP via SSH , Get a syslog out of the device for analysis. The syslog contains dmsupgrade.log which should help TAC determine the root cause.
Worst case scenario, you may have to re-image the system using 5.2.3 FRESH ISO (different than upgrade ISO, this image can be obtained via TAC) , restore the CONTENT and CONFIG (assuming you have the backup of both) and re-trying the upgrade.
Or if this is fairly new setup you can also choose to run 5.3 FRESH ISO (assuming you don't want to retain any content and config)
I'd recommend opening a TAC case to troubleshoot this further.
Thanks,
Sagar Dhanrale

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Ask the Expert: Overview of Cisco Prime Service Catalog and Process Orchestrator Solutions

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
Jason is a subject matter expert with the following products and features:
Cisco Prime LAN management solution
Cisco Prime infrastructure
CiscoSecure ACS
Cisco Prime Network Registrar
Cisco Process Orchestrator
Cisco Prime Service Catalog
Cisco IP SLA
Embedded Event Manager
SNMPv3
onePK and OpenFlow
Cisco UCS
Device instrumentation
VMware ESX, ESXi, and vCenter
ITIL
Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
Remember to use the rating system to let Jason know if you have received an adequate response.
Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Jason,
Thank you very much for welcoming me to your expert discussion :) I feel to be in the right place, at the right time. Thank you also for answering question beyond your scope here, much appreciated. The information received will help me to go further as such I have submitted a 5 start rating for your first reply.
That sounds promising about the LMS part so yes, I stay tuned and wait patiently.
Ok, now let’s revert to the actual topic discussed here. Cisco Prime Service Catalog and Process Orchestrator solutions I have briefly read up on this on CCO (where elseJ) and picked out the following quote
---- Quote from the Cisco Prime Service Catalog Data Sheet
Today’s end users want self-service and easy access to IT tools and services.
Simultaneously, organizations are seeking ways to extend their cloud management
platforms beyond self-service delivery of virtual machines and infrastructure resources
while increasing their use of cloud-based solutions to enhance business agility and effectiveness.
Cisco Prime™ Service Catalog offers tremendous benefits to organizations that want to unify the ways in
which all types of IT services are ordered and fulfilled, not just infrastructure requests
---- un quote ---
I try to understand what (at high level of course) happens in the back ground when an order is raised and which vendor solution your product can interact with.
As mentioned in the quoted text, this service catalogue goes beyond the standard infrastructure.
Let’s say, a user wants to deploy a new email services, or in your example, extends or create a new web-portal (i.e. for HR to view and manage holiday, staff absence and benefits).
Your solution will need to interact somehow with the 3rd party vendor application that is capable building such portal I believe.
Without disclosing to many information, I assume the portal is linked to backend VM,s that spin up requested resources (and more magic of course). Perhaps I am mixing this up with another cisco product where a user can go on the portal and spin up virtual Firewalls, virtual Routers can be provisioned in now time.
Out if interest; Is this product also known as Mozart? (project code within Cisco?)
I hope query is ok.
Best wishes
Markus

Moving from 32-bit to a 64-bit OS how will this impact ebs upgrade process

we are planning to upgrade from ebs 11.5.10.2 to r12.1 .3
My concern is since we will be moving from 32-bit to a 64-bit OS how will this impact our upgrade process?

Hi;
we are planning to upgrade from ebs 11.5.10.2 to r12.1 .3
My concern is since we will be moving from 32-bit to a 64-bit OS how will this impact our upgrade process?I assume your EBS single machine. EBS r11 is not certified wiht 64 bit OS.So you need to upgrade first than migrate it 64 bit
See:
32bit to 64 bit migration-EBS-Linux
EBS r12 migrate 32-bit to 64-bit.
32 bit to 64 bit 11i migrate
Migrattion of E-Business Suite.
Regard
Helios

BPC 7.5 upgrade process - Doubts

Hi,
Once we had the confirmation and approval to upgrade the system from SP00 to SP03 (on .NET server components), we noticed that some functional configurations had been made in the meantime. This new scenario where new things had been done from a functional perspective makes me wonder if any of that configuration could be lost while or after upgrading the server component?
Also, after reading Note 1453797 - Planning and Consolidation 7.5 SP03 NW Central Note, section "Before you install" to be more specific it says to uninstall any previous version of the .NET server and client components. Also Scott recommended me that as a best practice. This applies when the upgrade is being done from BPC 7.0 to BPC 7.5 for example or it also applies to my case (uprading BPC 7.5 system from SP00 to SP03)?
Thanks again for your help.
Regards

Hi Ethan,
Thanks for the quick response.
Actually I'm new installing BO BPC and maybe I've not used the correct words to describe that configuration I've detected while trying to install SP03. What I've noticed is that an Initial Application Set has been created. Actually, this is the only thing I have found but I'm not sure if that imply any other configurations either in .NET server or ABAP server that could be lost after upgrading the server component from SP00 to SP03. The same question arises if I decide to uninstall the current installation to perform a fresh one using SP03 directly as its described in note 1453797.
In summary, is there any chance to lost the configuration made on a BPC system (.NET and ABAP servers or client) if any of the above upgrade process is performed?
Hope being clear enough this time thanks so much for your help.
Kind regards

Is R3load used in Upgrade process

Hi all,
During Upgrade in CONFIGURATION PHASE when we select
> MANUAL SELECTION OF PARAMETERS & provide values R3load is by default 3
I am pretty confused where R3load is used in Upgrade process
Why is R3load not mentioned in the Upgrade Guide if it is effectively used
SAP ERP 6.0 Including Enhancement Package 4 Support Release 1 ABAP
Based on SAP NetWeaver 7.0 Including Enhancement Package 1
Pls advice on the following
-Rahul

Hi,
As already mentioned R3load is what will load the database tables during Upgrade process. If you have enough resources you can speed up the downtime Upgrade Process using more R3load parallel processes but this will depend in how many CPU's and memory you have. Usually each R3load process will take around 512Mb of RAM and you can use 1.5 R3load processes per CPU.
I have used this numbers given to us by SAP and did not have any problem at all.
Good luck,

Upgrade Process from SQL 2005 to SQL 2012

Hi All,
I have gone thru multiple threads and would like to understand some steps in detail for me to upgrade SQL 2005 to SQL 2012.
Below is my understanding and questions around it, I would be setting up a new environment with OS 2007/2008 with SQL 2012:
Environment Readiness - Ensure new environment is ready with Win 2007/2008 with SQL 2012 Server
Run Upgrade Advisor on the new environment and point to SQL 2005 instance
Find the breaking/discontinued changes to be done before or After Upgrade
<Question>: Over here I would like to know what should be our approach to make the required changes
<Question>: Obviously I should not be making changes directly on the Production SQL 2005 server, then in that case should I take a backup/restore on the new SQL Server 2012 and then make the required changes to the database objects
like (Table schema(changing column names/datatypes etc.), Stored Procedure, Functions & Views)
<Question>: When I do a backup/restore I would also get the data along with it, so is this a recommended approach or should we only run/use the table schema creation scripts, fix the issues identified by UA and then do an Table to Table import,
any thoughts on this ?
<Question>: If I have to do a table to table Import then I should ensure there's a downtime during the Import or would I have any other better approach
So, basically my questions are around the approach of fixing the issues identified by UA and moving the database to SQL Server 2012 environment, I have around 300 databased to me upgraded.
Please do let me know what should be a good/proven approach ? Pl. do let me know if you would need any more details from me.
---Umesh

Thanks all for the replies.
I am trying summarize what I have understood here:
Document SQL Server 2005 environment details, Is there any tool which could give us all relevant details
I would take the backup from the SQL Server 2005 Production environment and then restore the same in a test environment which again has SQL Server 2005 and Run Upgrade Advisor on that
Probbaly run SQL Profiler as well to find out the deprecated changes to be done
I should fix all the breaking, discontinued changes on the Test system identified by UA
I should fix all the deprecated changes on the Test system identified by SQL Profiler
Steps 3 & 4 should give me the changed scripts for all database objects (i.e. Table Schema, Stored Procedures, Functions & Views)
<Question> Perform test, I understand this acitivity test can be captured by having SQL profiler running in the background on the SQL Server 2005 production environment where we can identify some days in a week or a month where maximum activity is
expected to ensure we cover most the scenarios, let me know is this approach looks fine or is there a better approach
Now, with regards to acutal upgrade I need to identify a time window where in less activity is done during which I could have a downtime for the actual SQL Server 2005 production environment
Post downtine, I should do a BackUp for all databases from SQL Server 2005 production environment
Test on environment readiness of SQL Server 2012 can be compared against the documentation done as part of the first Step
<Question> Ideally I should a restore first in the new environment which has SQL Server 2012
<Question> Then run the Scripted changes where we fixed all the breaking, discontinued & deprecated changes
<Question> Does above sequence of Step 9 & 10 make sense or is there a better approach of doing it
<Question> Post Upgrade and running of changed scripts, I should run the Upgrade Advisor again and see if everything looks fine
<Question> Perform test again which we ran on SQL Server 2005 Test environment
<Question> These steps should complete the Upgrade process.
Please do let me know if the above sequence look ok to all of you and does it really work in a practical scenario, do let me know your feedback or any change in sequence/process or any other tools that can be used here.
Thanks Again ...

Cisco Modem Firmware (HWIC) upgrade Process

Similar Messages

Maybe you are looking for