Cisco MX700 not saving system name or ntp

Hello,
We have a new MX700 telepresence system. When I set the system name under Configuration>System Configuration>System Unit and hit the save button the name will update as expect on the touch pad. If I reboot the system that setting is lost without fail. Same with the ntp server ip. Anyone else have this issue?
The issue is a problem because the system name is what the unit uses when it registers with DHCP, which in turn means the DNS name keeps changing back to "localhost" instead of the name I choose.
Code is
Current version
TC7.3.0.8cb420c
Thanks
Dallas

When you register a TelePresence endpoint to CUCM, configuration of the endpoint comes from CUCM.
Administering Endpoints Running TC7.2 on UCM 10.5.1
See pg 21 for SSH and pg 25 for System Name. Probably best to go over the entire document to make sure everything is set correctly, just in case.
I didn't see NTP in that guide, but found an older guide where it said to do the following:
Setting a NTP Reference for the endpoints
In UCM Administration > System > NTP Reference
Configure a Phone NTP Reference for the endpoints.
*The NTP Reference must be in Unicast Mode.
*Assign to Date/Time Group, which in turn is assigned to Device Pool.

Similar Messages

Apple Mail not saving attachment Name!!

I'm on OSX Mavericks 10.9.4 and using Apple Mail. I'm experience extreme frustration when trying to save attachments. Let's say I get an email with 2 attachments named smile.jpg and sunset.jpg and then I click on the icon in Apple Mail to save all and it brings up the dialogue box to select a folder; I navigate and select a folder Pictures>Images expecting smile.jpg and sunset.jpg to be saved in the images folder with the correct names. Instead what happens is the attachments are stored in the Pictures folder with the names Images-01.jpg and Images-02.jpg. Very frustrating! Is anyone else experiencing this or have a fix?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Lion not saving system preferences on restart

I'm using Lion on a new Macbook Air where it came pre-installed. I just updated to 10.7.2 and Lion is no longer saving my mouse and keyboard settings.
I have "Scroll direction: natural" unchecked but when I restart my Mac natural scrolling is enabled. When I open up Trackpad settings the setting is unchecked by I have to re-check and then uncheck this setting to turn off natural scrolling.
I have custom modifier key settings (General Settings -> Keyboard -> Modifier Keys) where I swap Command and Control. My modifier key settings are now getting reset to the default every time I restart my computer.
Any ideas on how to fix this? I've tried calling Apple Support but they are no help.

Make sure the systemprefs plist file is not locked. If it is, unlock it. If it isn't, delete it then restart.
To find the file
1. Make Finder active. Choose 'Go' from the menu bar, hold down the option key.
2. Choose Library (you must have the 'option' key held down).
3. Go to Preferences > com.apple.systemprefereces.plist
4. Right-click (or hit 'cmd-i' on the keyboard) and choose 'Get Info'. If the 'Locked' option is ticked, untick it. Then Restart. If the 'Locked' option is not ticked, close the dialogue, remove the file to trash. Restart.
5. What happens now is that system will restart at default system prefs. However, it should now save your new settings. To test it, just set one of the setting that you know didn't 'stick before', then restart and see if all is good.

Annotated PDF file not saved, + "System Error"

A few issues with the newly updated Adobe Reader app for the iPad (April 10, 2012):
1- I can mark-up a PDF with the annotation tools (pen, highlighting, underlining, etc) and then hit SAVE. When I then re-open the PDF, I do not see my comments/mark-ups,
2- From within the Adobe Reader app -- when I try the "open-in" (to another application), I receive a pop-up message: "A system error was encountered."

Luis,
I think the problem you describe is different. For SGFilipe1022, the issue is that while in Reader, the annotations are not visible after closing and opening the document within Adobe Reader. However, in your case I suspect that what you are seeing is that not all PDF Readers support the viewing of comments and markups. In particular, the previewer in Apple's Mail program for iOS does not render comments. Similarly, most PDF Readers on iOS use the device's built-in rendering to show PDFs. This also does not support viewing of annotations.
Can you please tell me where you are viewing the PDF after editing it in Reader? This will help me confirm (or disprove) my suspicion.
Thanks!
Pat

Pc suite restore not saving names for text message...

Hi, I have a nokia N95 and recently got the N95 8gb. I backed up everything from my original N95 using pc suite and then restored onto my new handset and i found that it has done everything except it has not saved the names with the text messages, just the numbers. The names are in the phone book and aren't duplicated. It has saved names for the my picture messages just not text messages. I am finding it really annoying!! I hope someone is able to solve this for me! Thanks

You can try to restore category by category: phonebook first then the text messages. I'm not sure if it works. But it seems to be caused by the wrong order of restore.
What's the law of the jungle?

ICloud mail settings not saved in System Preferences on Mountain Lion

I note that iCloud mail settings not saved in System Preferences on Mountain Lion even if I tick mail in Icloud then close system preferences then open system preferences and it is untiked again?
Does anyone know how to fix this?
Cheers
Paul

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Logical System Name Not appearing in the Business System

Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
Rehan

Hi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan

Non admin user - changes not saved (Safari settings, system prefs, etc.)

iMac, 2 users, one is administrator and other is standard user. Recently, in the non-admin user account, it has become impossible to make any changes. For example, adding an application to the the Dock, after logging out and back in next time, the application is not in the Dock any more. Also, making changes to the prefs in Safari, changes are not saved.
I noticed this after installing FireFox v4. I installed it as admin whilst in the non-admin users account. However, I don't believe that the installation of FF has anything to do with the problem, it just highlighted it. I've checked the permissions for the various directories that hold prefs info such as user/libraries/application prefs/etc. etc. and also Safari prefs. Nothing I can see that has changed in system prefs.
Any ideas on what has caused the problem (kids are known to fiddle from within the non-admin account) and any ideas on how to fix it?
Thanks

Hi PPRuNe,
You could try making the standard user an Admin too. To do this, make sure you are logged in to the standard user, go to System Preferences > Accounts > Standard user (you may have to unlock the padlock) > Allow user to administer this computer
This will allow changes to be made without being prompted for a password all the time.
However, if you had Parental Controls on, they probably won't work on an admin account because as an admin you have complete control over a computer, so the computer thinks there is no point in having the controls turned on. And if the kids are known to "fiddle," just think carefully!
Hope this helps you.
Chris.

Desktop setting not saving after system update

Hi All,
I did a system wide update including the changing the kernel from 2.6.25 to 2.6.28 and now I cannot change my desktop setting.
that is, my desktop background picture and font size is not saving. First I could not shutdown and i read the forum where
it was suggested to downgrade from hal-0.5.11-7 to hal-0.5.11-4. and that work for me. but my system
not saving my desktop setting. I have the "automatically save session on logout" check.
I am using xfce4 as my DM
any help please.

hi,
check your home folder permissions. open up your /home/ right click on your username folder click properties and in permissions dialog check that owner can view/edit files and then check something like apply to all subfolders and files

Query View name not saved in "Analysis Grid Properties" under Data Provider

Hi BW World;)
We are on BI 7.0
I have created a BI workbook which contains a query view.
However when we go into design mode and then "analysis grid properties" for this query view then "change data provider" it does not show the query view name but the query name. (we have saved the workbook)
Is this the normal scenario?
Surely should show the "query view name " and not the "query name" as confuses what data provider is being used?
Is this a bug?
Best
Stevo.... Points of course... Thanks in advance.;)
Edited by: bw4eva999 on Sep 10, 2009 4:40 PM spelling

Hi,
You have created a workbook on top of a Query View which is again depends on a Query.Now the base for Query View is a Query.So the underlying Data Provider for a workbook is a Query.
Hence when you go to Properties of grid->Change Data Provider,it shows the Query and the InfoCube,but not the Query View.
So this is not a bug and this how its been designed.
If you click for the Information of that workbook,it will show the Query and Info Provider,but not the query View.
Though it looks like wierd,it is not a bug.
Rgds,
Murali

FACT SHEET Configuration not saving in transport to move to QA system

hi Experts
I am setting up the Account Fact Sheet BP_ACCOUNT_FS for my users and the only configuration that is saving is the configuration of the layout of the fact sheet to a transport. The actual settings or configuration within the fact sheet is not saving. For example, I used a BI report and added my query and parameter and while this saves in our development box, this will not save in the transport to move up through the systems.
Any thoughts? I already have a message open with SAP but checking to see if anyone has an immediate solution.
Thanks,
Chris

Hi,
P-table is an time independent attribute table ie it contains all the attribute info. in that table. so when u added a characteristic to that infoobject, u can find that entry in the P-table.
Also M is a view on P & Q tables. It is not a table.
T- ie Text table will contain only short,medium and long texts related to that info object.
so when u add a characteristic to infoobject it will be refelcted in P-table or Q- only. Not in Text tables.
Narendra Reddy

System Log Event ID 4321 every 30 seconds, system name conflict for a name not in use

-- Symptom --
System event log shows an error with event ID 4321 every 30 seconds:
The name "pac-1 :2d" could not be registered on the interface with IP address 172.20.51.206. The computer with the IP address 172.20.21.2 did not allow the name to be claimed by this computer.
-- Environment --
OS: Windows 7 x64 Enterprise
Network: Enterprise domain
DHCP: Yes
WINS: via DHCP
-- Additional information --
This computer was set up from an image. The image was built with the system being named 'pac-1'. This system's name was changed to 'pac-11' before (or possibly shortly after) joining the domain and now has a completely different name, and there
is no system on the network with the name 'pac-1' (there are 'pac-3', and other numbers, but no 'pac-1')
I have renamed the system with no change to the frequency of the error, and I cannot find 'pac-1' in the registry anywhere except for strings located in HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\LANDesk\Inventory\LogonHistory\Logons that list prior logons.
I've done my google research and have found great information for plenty of other people's situations, just not this one. Any helpful advice is welcome.
Thank you!

c0lorless wrote:
-- Symptom --
System event log shows an error with event ID 4321 every 30 seconds:
The name "pac-1 :2d" could not be registered on the
interface with IP address 172.20.51.206. The computer with the IP
address 172.20.21.2 did not allow the name to be claimed by this
computer.
-- Environment -- OS: Windows 7 x64 Enterprise
Network: Enterprise domain
DHCP: Yes
WINS: via DHCP
-- Additional information -- This computer was set up from an image. The image was built with the
system being named 'pac-1'. This system's name was changed to
'pac-11' before (or possibly shortly after) joining the domain and
now has a completely different name, and there is no system on the
network with the name 'pac-1' (there are 'pac-3', and other numbers,
but no 'pac-1')
I have renamed the system with no change to the frequency of the
error, and I cannot find 'pac-1' in the registry anywhere except for
strings located in
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\LANDesk\Inventory\LogonHistory
\Logons that list prior logons.
I've done my google research and have found great information for
plenty of other people's situations, just not this one. Any helpful
advice is welcome.
Thank you!
I'd check my WINS server's registration entries, if they contain an
entry with that NETBIOS name. If the machine with the ip-address
172.20.21.2 is not your WINS server you need to check, what services
etc. are running on that machine. Also look if the domain/workgroup
name, which is used by this machine is correct and identical to all
other machines.
Wolfgang

Logical system name has not been assigned to

Hi, Expert
I m trying to transferr DATA from ECC to APO . when I configured my ECC and APO systems according the SCM 210, but I still meet the error like this
logical system name has not been assigned to
syste: user:
Function/Q/SAPAPO/CIF_PRODUCT_INBOUND
text: logical system name has not been assigned to
my ECC is ECC6.0,and APO 7.0
Can u help me,Thank u. I m waiting the solution on desk
Rockey
Edited by: Xinyou Dong on Jun 2, 2011 9:11 AM

Hi,
I think you dont have partner profile created.
Try to create one with the RFC which is connecting ECC and APO.
Thanks,
Deepthi

Logical System Name 'WD_RFC_METADATA_DEST' is not properly defined in SLD

Hi,
Im getting this error message:
<h3>
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: 'WD_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
</h3>
What action should I take to fix this error? is this a web dynpro side error or basis error?
Thanks!

Dear TJ Ronald Amorado
Please test the JCO destination for the model data and meta data which you are using in the webdynpro model.
As per the error message you are getting 'WD_RFC_METADATA_DEST' is not defined in the QA.
Please create it in the QA manually and test it. Refer to document : - [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true]
Copy the name of the modeldata and metadata and use the same name in logical destination during model creation in webdynpro.
Hope it will helps.
Best Regards
Arun Jaiswal

System name for alias GD4_500 not found in portal

Hi people,
I want to launch a query from analyzer, but i have the next error message "System name for alias GD4_500 not found in portal".
What can i do??
More thanks

Read,
http://help.sap.com/saphelp_nw70/helpdata/en/fb/93ed3d72fe4b5ae10000000a11405a/content.htm
Regards
Juan

Cisco MX700 not saving system name or ntp

Similar Messages

Maybe you are looking for