Cisco Netflow Collector 6.0 Data base

What is the database used by Cisco netflow Collector 6.0 ?

I guess it is IBM Informix IDS. Read it in one of the old release notes of Cisco NetFlow collector. Iam not sure if anything else is involved.
Regards,
Don Thomas Jacob
ME - NetFlow Analyzer

Similar Messages

Using Cisco Prime NAM as Netflow collector

Hi everybody,
I would like to know if it's possible to use a Cisco Prime Network Analysis Module for ISR G2 as a NetFlow collector. A draft of architecture is attached. What I need to do is monitor Gi0/0 and Gi0/2 and produce reports about the total amount of traffic to/from two groups of server in the remote data center. My customer doesn't want to use it's NMS neither wants to use a netflow collector. My company can't install and/or operate any kind of new software or hardware to do this job. VRF is not a problem, I can monitor them one at a time.
Reading documentation it seems me that it's possible configuring Netflow as a data source.
Has any body any experience in tis kind of config ?
Thx,
Enrico

The detailed view of the CDR based dashlets displays the CDR or CMR data only for the last 30 days.
The call details of the endpoints prior to 30 days is not displayed by the dashlets, however, the aggregation
of CDR or CMR data for the endpoints is available for the time period of one year.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-0/analytics/guide/Cisco_Prime_Collaboration_Analytics_Guide_10.pdf

Designing Cisco Netflow Architecture ?

My company isn't using a management system for analyzing the WAN traffic and we want to implement Cisco Netflow to analyse the network traffic on the backbone. We have a huge network with more then 100 sites across the world. We use 120x 2600 routers and 6x 7200 routers.
Now the question is : How to collect the data into a central place ?
The routers have netflow activated and they send the netflow information to a netflow collector. Now we need a program that collects the data from the netflow collectors to a central place and analyzes this. I searched the cisco site and found out that cisco uses a Netflow server for that solution. But Cisco has decided to partner with third-party vendors to deliver the Netflow Server product.
Does Anybody have any ideas ?

Hi
if I understand you correctly you need some application to make your netflow data human viewable , right ?
Take a look at this page, it is a very good listing of different vendors which deliever such products, also some freeware projects are listed ...
http://www.switch.ch/tf-tant/floma/software.html
here is a additional listing
http://www.inmon.com/technology/netflowapps.php
Michael

Netflow Collector 6.0 demo license

Hi,
It is said in the NetFlow Collector Installation and Configuration Guide that a limited-time demo license can be obtained from Cisco.com
How can i get this demo license?
Regards,
Velin

Hi,
I think you can obtain that (and more) demo licenses here:
https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet?DemoKeys=Y.
Good luck!
curtis

NetFlow Collector demo

Hi,
I installed netflow collector demo version 5.0 in a solaris server.
How can i log into web page because it's don't ask me for user and password.
Greats.

Hi,
I think you can obtain that (and more) demo licenses here:
https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet?DemoKeys=Y.
Good luck!
curtis

CCM 3.1 Corrupted Data Base

Hello Experts,
I am going to be assigned to a project which involves upgrading the current version (3.1) to 4.1 or 4.2 for a CallManager. The data base is corruped. We can't either read or wirte into the DB. My question is, is there any way to rebuild the corrupted DB? After rebuilding the DB, I need to back it up and restore it into a brand new 4.1 CallManager server. Could you please help?
Thanks,

Hi Bahman,
Just to add to Greg's excellent post;
You cannot upgrade directly from Cisco CallManager Release 3.2 or earlier to Cisco CallManager Release 4.1. If your server runs a version of Cisco CallManager Release 3.2 or earlier, you must first upgrade every server in the cluster to the latest version of Cisco CallManager Release 3.3 or 4.0 before you can upgrade to a version of Cisco CallManager Release 4.1. For information on upgrading to Cisco CallManager Release 3.3, refer to the latest version of Upgrading Cisco CallManager Release 3.3. (I think 3.3.5sr3). This is a major undertaking that will require some major planning and probably a Lab set up. The change from 3.1 to 3.3 involves a complete SQL upgrade from SQL7 to SQL2000 along with the server which went from 5.5 to Windows 2000
I believe. We spent a great deal of time in the lab on this build.
From this doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_installation_guide_chapter09186a00803fd70b.html
Upgrading Cisco CallManager Release 3.3(5)
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_installation_guide09186a0080379983.html#wp162154
Hope this helps!
Rob

Transfer of xml file elements to data base columns

hi all,
i have to store xml file's data(element values) into the data base(table columns).
i heard that we can acheive this by XSU.
IS it is mediator between xml and db? if yes how to install it.
i tried something as below
with t as (
select xmltype('<Message-Header>
<Message-Id>1234</Message-Id>
<Sender-Company-ID>4569</Sender-Company-ID>
<Sender-Company-Name>abc company</Sender-Company-Nam
<Sender-User-ID>AA</Sender-User-ID>
<Recv-Company-ID>050</Recv-Company-ID>
<Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
<Creation-Time>20101019 15:59:39</Creation-Time>
</Message-Header>') as xml from dual
)but i am getting following error. can anybody explain about this
SQL> ed
Wrote file afiedt.buf
1 with t as (
2 select xmltype('<Message-Header>
3 <Message-Id>1234</Message-Id>
4 <Sender-Company-ID>4569</Sender-Company-ID>
5 <Sender-Company-Name>abc company</Sender-Company-Name>
6 <Sender-User-ID>AA</Sender-User-ID>
7 <Recv-Company-ID>050</Recv-Company-ID>
8 <Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
9 <Creation-Time>20101019 15:59:39</Creation-Time>
10 </Message-Header>') as xml from dual
11* )
SQL> /
with t as (
ERROR at line 1:
ORA-01041: internal error. hostdef extension doesn't existPlease help me..
my db version is Oracle Database 10g Release 10.2.0.1.0 - Production

Hi,
What are you trying to achieve with a single WITH clause and no SELECT?
Please see this from the documentation if you want to use it properly :
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#i2077142
Apart from its true purpose of subquery factoring, the WITH clause is often use here and there to simulate a table content, but you'll always need a SELECT.
Maybe that's what you were trying to do?
As for your question, starting with release 10.2, Oracle provides XMLTable to shred XML documents into relational structures.
For example,
with t as (
select xmltype('<Message-Header>
<Message-Id>1234</Message-Id>
<Sender-Company-ID>4569</Sender-Company-ID>
<Sender-Company-Name>abc company</Sender-Company-Name>
<Sender-User-ID>AA</Sender-User-ID>
<Recv-Company-ID>050</Recv-Company-ID>
<Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
<Creation-Time>20101019 15:59:39</Creation-Time>
</Message-Header>') as xml from dual
select x.*
from t,
     XMLTable(
      '/Message-Header'
      passing t.xml
      columns
        message_id          number       path 'Message-Id',
        sender_company_id   number       path 'Sender-Company-ID',
        sender_company_name varchar2(30) path 'Sender-Company-Name',
        sender_user_id      varchar2(30) path 'Sender-User-ID',
        recv_company_id     varchar2(30) path 'Recv-Company-ID',
        recv_company_name   varchar2(30) path 'Recv-Company-Name',
        creation_time       varchar2(30) path 'Creation-Time'
     ) x
;If you're working in PL/SQL, and the XML resides in a variable, you can directly do (with necessary datatype conversion in the SELECT) :
insert into your_table ( <your_columns_list> )
select <your_columns_list>
from XMLTable(
      '/Message-Header'
      passing your_xml_var
      columns
        message_id          number       path 'Message-Id',
        sender_company_id   number       path 'Sender-Company-ID',
        sender_company_name varchar2(30) path 'Sender-Company-Name',
        sender_user_id      varchar2(30) path 'Sender-User-ID',
        recv_company_id     varchar2(30) path 'Recv-Company-ID',
        recv_company_name   varchar2(30) path 'Recv-Company-Name',
        creation_time       varchar2(30) path 'Creation-Time'
     ) x
;

How to export a data as an XML file from oracle data base?

could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
Bala

SQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2    doc DBMS_XMLDOM.DOMDocument;
3    xdata XMLTYPE;
4
5    CURSOR xmlcur IS
6    SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7                                  'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8                              ,xmlelement("EmployeeNumber",e.empno)
9                              ,xmlelement("EmployeeName",e.ename)
10                              ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11                                                      ,xmlelement("Location",d.loc)
12                                         )
13                   )
14     FROM   emp e
15     ,      dept d
16     WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19    OPEN xmlcur;
20    FETCH xmlcur INTO xdata;
21    CLOSE xmlcur;
22    doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23    DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
.

Can any one help me to configure the mysql table to enable user expiration to function, I have tryed most things, but not dates are being passed back to the data base from the form

Im trying to build user expiration into my registration form, but I cant get the form to send back the date registering.
in my data base i have tried every thing from timestamp to datetime. I can get a timestamp but it is not functioning with the expiration?

just have a look at my tutorial Login tables: installation & configuration where the required column attributes are explained and where you can obtain a fully functional SQL dump for a typical ADDT "login" and (optionally) "login_stats" table.
BTW, "expiration" will have to be an "int" column.
Cheers,
Günter

Quota Generation not happen's on Pro data basis .

Dear experts,
Time evalution status - 1.
1.Employee service 0 - 5 years - 24 Days entitlement
2.Employee service 5 - 10 years - 29 days entitlement.
when generating quota for employee less than five years its calculating correctly.when come's to employee more than 5 years its not calculating on pro-data basis of employee joining month. Instead of Month it's looking at the year and calculating it.
DOJ of employee
Mar-09
Year
TOTAL quota accrued
2009
20
2010
24
2011
24
2012
24
2013
24
Client requirement
System calculation as of now
2014
28
29
Calculation part.
below screen shot show how system calculating and how client needed.
how this scenario can be configured.
Regards
Vinodh

Check the Deduction rule for that Quota
once check the Groupings for ESG and PSA
V_001P_ALL
V_503_ALL

How to stored data after clicking checkbox in data base table

REPORT ZT                                      .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
              smatnr FOR mseg-matnr MODIF ID m2,
              swerks FOR mard-werks MODIF ID m3,
              slgort FOR mard-lgort MODIF ID m4,
              slgpbe FOR mard-lgpbe MODIF ID m5,
              scharg FOR mseg-charg MODIF ID m6,
              sbwart FOR mseg-bwart MODIF ID m7,
              skostl FOR mseg-kostl MODIF ID m8,
              saufnr FOR mseg-aufnr MODIF ID m9,
              srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
          pse RADIOBUTTON GROUP radi,
          bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*&      Form get_data
      Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
   msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
              JOIN mkpf ON msegmblnr EQ mkpfmblnr
              WHERE mseg~matnr IN smatnr.
ENDFORM.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
     t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title   TYPE lvc_title,
       w_comm    TYPE slis_formname,
       w_status TYPE slis_formname,
       x_layout TYPE slis_layout_alv,
       t_event    TYPE slis_t_event,
       t_fieldcat TYPE slis_t_fieldcat_alv,
       t_sort     TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
       1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
       4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
       5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
       6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
       9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
   14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   i_callback_program       = V_REPID
   it_fieldcat              = t_fieldcat
   is_layout                = x_layout
   it_sort                  = t_sort
   i_callback_pf_status_set = w_status
   i_callback_user_command = w_comm
   i_save                   = 'X'
   it_events                = t_event
   i_grid_title             = w_title
TABLES
   t_outtab                 = t_data
EXCEPTIONS
   program_error            = 1
   OTHERS                   = 2.
IF sy-subrc <> 0.
   MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
     t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
       x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event   TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
     t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
     p_outputlen p_noout
     p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
     p_hotspot p_showasicon p_checkbox p_edit
     p_dosum
     t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
   wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
   wa_fieldcat-ref_tabname = p_ref_tabname.
   IF p_ref_fieldname EQ space.
     wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
   ELSE.
     wa_fieldcat-ref_fieldname =   p_ref_fieldname.
   ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
   wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
   wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
   wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
   wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
   wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
   wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
   wa_fieldcat-INPUT     = 'X'.
   wa_fieldcat-EDIT     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
     i_logo             = 'TRVPICTURE04'
   it_list_commentary = t_heading.
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
FORM user_command USING r_ucomm     LIKE sy-ucomm
     rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
   IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR.                              " U CAN DELETE
SY-MSGV2 = WA-MATNR.                              " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888'          " U CAN DELETE
        WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
   INSERT ZTABLE.
   ENDIF.
endloop.
ENDCASE.
ENDFORM.                    "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.

Hi Lakshmi,
       Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...

Differnace b/w SID and Global data base name

please tell me what is differance b/w SID and global data base name.

Hi,
Oracle System Identifier (SID)
A name that identifies a specific instance of a running pre-release 8.1 Oracle database. For any database, there is at least one instance referencing the database.
For pre-release 8.1 databases, SID is used to identify the database. The SID is included in the connect descriptor of a tnsnames.ora file and in the definition of the listener in the listener.ora file.
http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14213/glossary.htm#i433004
Global database name
The full name of the database which uniquely identifies it from any other database. The global database name is of the form "database_name.database_domain," for example, sales.us.acme.com.
The database name portion, sales, is a simple name you wish to call your database. The database domain portion, us.acme.com, specifies the database domain in which the database is located, making the global database name unique. When possible, Oracle Corporation recommends that your database domain mirror the network domain.
The global database name is the default service name of the database, as specified by the SERVICE_NAMES parameter in the initialization parameter file.
http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14213/glossary.htm#i435858
Adith

REPORT AND DATA BASE SETUP

i have been using CView Manager 11 to do my reports and is relatively easy to setup reports to the data base, but not all of my reports work with this program plus there is no user manual available. So I am trying to switch over to Chrystal Reports 11 with little success. I can not figure out how to setup the data base server with this program. I am trying to access the McKesson IntelliShelf Supply (Supply Scan) data base server. Is there anyone that can help me with this?

McKesson is an OEM partner of ours. I suggest you ask them how to.

Creating a Crystal Report from a non-SAP data base

I have the following scenario
server1\myDataBase
server1\SAP\sapDataBases
in sapDataBases I have about 30 company databases. I am trying to create a report, that gets informatino from a table/view/SP from server1\myDataBase, when I try to PREVIEW or SAVE such report on SAP Business One, I always get errors as
I understand that this eerror means taht I can't invoke the data from out of SAP; it needs to be inside SAP (at least the SP, incoking some other data bases and stuff..)
Some bodies have told me that it is beacuase I can only create a report from a table/view/sp that resides in the running/currently SAP company database. Is this right?
Also, If this is the case, this means that If I have an SP taht I use for a crystal report, and 30 companies, I have to create such SP in the 30 companies?
This is my software details:
SQL Server 2012
SAP Business One 9 PL 11
SAP BusinessObjects Crystal Reports 2013 Support Pack 2 version 14.1.2.1121
What I want to do is to create a non-SAP data base to create all the SPs/Views for reports, to centralize it, and the just create one reporte and do the 30-imports in each company database, without the need of creating such sps/views in each company-database. Is this possible?
Thanks

Moved to Integration Kit forum.
The people in this forum will know more about the data structure than the CR Design forum which typically doesn't know much about the SAP Data sources Structure.
Don

Creating a Single Report from Oracle Data Base and BI Answers

Hi,
I wanted to create a single report by using a BI Report where in we have project and Activity columns,now I want to add column with Program to see the results.Program data is in Oracle Database.
Can some one help me how to create the report.
ii.How to edit a pivot table in BI word designer.What I am doing present is creating every time a new report.
Thx In Adv.
From Sravan

Hi Pivot table was a general question.Is is nothing to do with the qus 1.
See I have a report which have a programme and Activity.So I need to get the data of Prject from Data base how to do this in BIP.....I am not using any pivot table here.

Cisco Netflow Collector 6.0 Data base

Similar Messages

Maybe you are looking for