Cisco Network Assistant C4948E

Greetings,
I'm experiencing considerable difficulties with CNA and my 4948E cat's. Front panel view, vLans and VTP utterly fail...and I have gone to GREAT lengths. I initially configured them all for comprehensive use in a vSphere environment. Storage switch fabric and multi-vlan guest networking. I wiped the config's across the board, factory reset all of them in an attampt to get CNA working. NO GO and it's been wildly frustrating, 80+ hrs spent with no results.
So is CNA truely compatible with the 4948e? And if so, WHAT IN THE HELL AM I DOING WRONG!!?!?!?!!!!!?
Errors:
Config and info:
C4948#show ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 15.1(1)SG2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 24-Oct-12 02:27 by prod_rel_team
ROM: 12.2(44r)SG11
C4948 uptime is 22 minutes
System returned to ROM by reload
System image file is "bootflash:cat4500e-entservicesk9-mz.151-1.SG2.bin"
Hobgoblin Revision 21, Fortooine Revision 1.40
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C4948E (MPC8548) processor (revision 8) with 1048576K bytes of memory.
Processor board ID CAT1549S3LR
MPC8548 CPU at 1GHz, Cisco Catalyst 4948E
Last reset from Reload
1 Virtual Ethernet interface
48 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x1
C4948#show mod
Chassis Type : WS-C4948E
Power consumed by backplane : 0 Watts
Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
1    52 4948E 10/100/1000 (RJ45) 10GE (SFP+)   WS-C4948E-E        CAT1549S3LR
M MAC addresses                    Hw Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
1 5057.a8d0.cd00 to 5057.a8d0.cd33 3.0 12.2(44r)SG1 15.1(1)SG2       Ok
C4948#show run
Building configuration...
Current configuration : 4082 bytes
! Last configuration change at 07:13:04 UTC Fri Dec 28 2012
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
service sequence-numbers
hostname C4948
boot-start-marker
boot-end-marker
enable secret 4 4HopspGORG5lisjFN8lm2FKJv0pK2yWy35.cHKTMILk
no aaa new-model
ip vrf mgmtVrf
crypto pki trustpoint TP-self-signed-15493
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-15493
revocation-check none
rsakeypair TP-self-signed-15493
crypto pki certificate chain TP-self-signed-15493
certificate self-signed 01
30820221 3082018A A0030201 02020101 300D0609 2A864886 F70D0101 05050030
2C312A30 28060355 04031321 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31353439 33301E17 0D313231 32323830 37303833 385A170D
32303031 30313030 30303030 5A302C31 2A302806 03550403 1321494F 532D5365
6C662D53 69676E65 642D4365 72746966 69636174 652D3135 34393330 819F300D
06092A86 4886F70D 01010105 0003818D 00308189 02818100 B98A90E9 C7944EDC
FEF7B950 47F1AD32 0B6AC34C 49D8FB56 D0189D62 CEC8F974 26E85187 C8EC9CEF
35885C3D BCFB436F EEEB5D54 84708363 77317248 67D8DA4C AC64FB04 225C3822
3A4D22B9 C12A712A B22E3A2B AE3839DF 4C7EBD6A B64D40E1 BC320307 D2ECEBF3
D35ED80E 6CB31C01 4D1A2763 AB96792F B53D8A03 8584FDB1 02030100 01A35330
51300F06 03551D13 0101FF04 05300301 01FF301F 0603551D 23041830 1680146D
6B5ED2DA 8BA3C329 99190C69 D3C267D5 3975AF30 1D060355 1D0E0416 04146D6B
5ED2DA8B A3C32999 190C69D3 C267D539 75AF300D 06092A86 4886F70D 01010505
00038181 003A131D 1D66E5A7 86BA776E 640A1206 2D4CB548 99F6C9C9 F6E94859
5CAF4906 2B85BC5B 6BD83927 06FE03E1 21CA9F8C 389598D8 0FAFED72 3F855E8A
948780EB BCF976E7 A24BADC7 68D009CB 3C481507 E94D4901 3E6CA71E 4CAFDAAA
E77F1461 92D05DDF B97C8F49 9E085908 DA6BF21B 9F602885 5F1FB532 1547110A
AEAB3A39 72
        quit
power redundancy-mode redundant
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet1
ip vrf forwarding mgmtVrf
no ip address
speed auto
duplex auto
interface GigabitEthernet1/1
interface GigabitEthernet1/2
interface GigabitEthernet1/3
interface GigabitEthernet1/4
interface GigabitEthernet1/5
interface GigabitEthernet1/6
interface GigabitEthernet1/7
interface GigabitEthernet1/8
interface GigabitEthernet1/9
interface GigabitEthernet1/10
interface GigabitEthernet1/11
interface GigabitEthernet1/12
interface GigabitEthernet1/13
interface GigabitEthernet1/14
interface GigabitEthernet1/15
interface GigabitEthernet1/16
interface GigabitEthernet1/17
interface GigabitEthernet1/18
interface GigabitEthernet1/19
interface GigabitEthernet1/20
interface GigabitEthernet1/21
interface GigabitEthernet1/22
interface GigabitEthernet1/23
interface GigabitEthernet1/24
interface GigabitEthernet1/25
interface GigabitEthernet1/26
interface GigabitEthernet1/27
interface GigabitEthernet1/28
interface GigabitEthernet1/29
interface GigabitEthernet1/30
interface GigabitEthernet1/31
interface GigabitEthernet1/32
interface GigabitEthernet1/33
interface GigabitEthernet1/34
interface GigabitEthernet1/35
interface GigabitEthernet1/36
interface GigabitEthernet1/37
interface GigabitEthernet1/38
interface GigabitEthernet1/39
interface GigabitEthernet1/40
interface GigabitEthernet1/41
interface GigabitEthernet1/42
interface GigabitEthernet1/43
interface GigabitEthernet1/44
interface GigabitEthernet1/45
interface GigabitEthernet1/46
interface GigabitEthernet1/47
interface GigabitEthernet1/48
interface TenGigabitEthernet1/49
interface TenGigabitEthernet1/50
interface TenGigabitEthernet1/51
interface TenGigabitEthernet1/52
interface Vlan1
ip address 172.20.0.2 255.255.255.0
ip http server
ip http secure-server
line con 0
stopbits 1
line vty 0
password poop
login
line vty 1 4
login
end
C4948#

I just tried with the latest IOS 15 and 12 (below) and neither made any difference...getting the exact same errors. This is crazy.
cat4500e-entservicesk9-mz.151-2.SG.bin
cat4500e-entservicesk9-mz.122-54.SG1.bin
Here are all the IOS versions I've tried, all of which exhibit the exact same errors:
cat4500e-entservicesk9-mz.122-54.SG1.bin
cat4500e-entservicesk9-mz.151-1.SG2.bin
cat4500e-entservicesk9-mz.151-2.SG.bin
cat4500e-entservices-mz.151-1.SG1.bin

Similar Messages

Cisco Network Assistant, unable to add a switch

I have a network running some 20 switches, two controllers and many AP's. All the devices that should be able to connect to cisco network assistant can successfully. However there is one switch that will show in neighbours but will give the message of “unable to connect to device” when I try and add it to the topology.
As far as I can see the config is identically to all other similar switches in the network. I can telnet from a switch (management VLAN) to the switch in question. However when I try to ping or telnet from the PC running network assistant (different subnet) I am unsuccessful. However I can ping/telnet to all other cisco device from this PC.
The switch is a WS-C3560-48TS and I have included the config for firstly the switch in question and another switch of the same model and config that works correctly. Any help would be greatly appreciated, thank you.
sho run
Building configuration...
Current configuration : 7363 bytes
version 12.2
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
hostname wc3_switch_1
enable secret 5 $1$Fn0U$2rG6DadA8JSUzQzSNmMc4/
enable password 7 1511021F0725
username dis privilege 15 secret 5 $1$b3d.$S43CM1xtXyEtO5Rsil6Bn1
username admin privilege 15 password 7 0811185C224C543341
no aaa new-model
ip subnet-zero
ip routing
no ip domain-lookup
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet0/1
description ### Connected to Parkside-AP05 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/2
description ### Connected to Parkside-AP06 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/3
description ### Connected to Parkside-AP07 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/4
description ### Connected to Parkside-AP08 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/5
description ### Connected to Parkside-AP12 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/6
description ### Connected to Parkside-AP13 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/7
description ### Connected to Parkside-AP20 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/8
description ### Connected to Parkside-AP21 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/9
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/10
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/11
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/12
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/13
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/14
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/15
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/16
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/17
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/18
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/19
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/20
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/21
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/22
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/23
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/24
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/25
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/26
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/27
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/28
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/29
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/30
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/31
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/32
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/33
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/34
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/35
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/36
description ### Connected to Parkside-AP36 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/37
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/38
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/39
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/40
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/41
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/42
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/43
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/44
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/45
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/46
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/47
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/48
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface GigabitEthernet0/1
description *** Connected to WC2A_Core_Switch ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/2
description *** Connected to wc3_switch_2 ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/3
shutdown
interface GigabitEthernet0/4
shutdown
interface Vlan1
ip address 10.0.0.31 255.255.255.0
ip default-gateway 10.0.0.254
ip classless
ip http server
control-plane
line con 0
password 7 144711185D07
logging synchronous
login local
line vty 0 4
password 7 144711185D07
logging synchronous
login local
line vty 5 15
password 7 094F471A1A0A
no login
end
wc3_switch_2#sho run
Building configuration...
Current configuration : 7239 bytes
version 12.2
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
hostname wc3_switch_2
enable secret 5 $1$Sfoj$a6AdO7PI0bP8ERhpWl3OP.
username dis privilege 15 secret 5 $1$D9c6$16yFzETOxBNHiPdTEqkxQ1
username admin privilege 15 password 7 133543002059550E78
no aaa new-model
ip subnet-zero
no ip domain-lookup
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet0/1
description ### Connected to Parkside-AP24 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/2
description ### Connected to Parkside-AP27 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/3
description ### Connected to Parkside-AP28 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/4
description ### Connected to Parkside-AP30 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/5
description ### Connected to Parkside-AP31 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/6
description ### Connected to Parkside-AP32 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/7
description ### Connected to Parkside-AP33 ###
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/8
description *** Curric4 VLAN Port ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface FastEthernet0/9
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/10
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/11
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/12
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/13
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/14
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/15
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/16
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/17
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/18
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/19
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/20
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/21
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/22
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/23
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/24
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/25
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/26
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/27
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/28
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/29
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/30
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/31
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/32
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/33
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/34
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/35
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/36
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/37
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/38
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/39
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/40
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/41
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/42
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/43
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/44
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/45
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/46
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/47
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface FastEthernet0/48
description *** Curric4 VLAN Port ***
switchport access vlan 6
spanning-tree portfast
interface GigabitEthernet0/1
description *** Connected to wc3_switch_1 ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/2
description *** Connected to wc3_switch_3 ***
switchport trunk encapsulation dot1q
switchport mode trunk
spanning-tree portfast
interface GigabitEthernet0/3
shutdown
interface GigabitEthernet0/4
shutdown
interface Vlan1
ip address 10.0.0.32 255.255.255.0
ip default-gateway 10.0.0.254
ip classless
ip http server
control-plane
line con 0
password 7 135514015A0F
logging synchronous
login local
line vty 0 4
password 7 135514015A0F
logging synchronous
login local
line vty 5 15
no login
end

The switch configurations look pretty straightforward and mostly correct.
I notice that the problem switch has "ip routing" global command. Why is that necessary? You are only using it as a L2 switch, yes? If you use "ip routing" and have no routing process (ospf, eigrp, etc.) running you would need to add a static default route (ip route 0.0.0.0 etc.) and not use the "ip default-gateway" command. Otherwise the switch itself (the SVI) does not know how to leave the management VLAN routing-wise since it is the only L3 interface defined.
(I might also add "ip http authentication local" on each and I'd definitely disable telnet in favor of ssh)

Software Cisco Network Assistant for Switch SMB?

Is there any management software as the Cisco Network Assistant for smb switch as SLM224G or SRW224G4-K9-NA, or only works with models 2960 and higher?

The SX300 series switch will work with CCA. But it does not work with CNA.
-Tom
Please rate helpful posts

Can't create VLAN's with Cisco Network Assistant

Hello everyone
I have a problem with my newest Switch, a WS-C2960X-48TS-L
Normaly I can programm all my Switches with Cisco Network Assistant. But now I have a problem with creating VLAN's. I can create them, safe them but after a refresh, all the new VLAN's are gone!
I updated the CNA to the newest Build 6.0 and updated the Switch to 15.2(2)E, but nothing helps!
Over the CLI I can do everything, but this is not a option for me! To programm sometimes a switch CNA is perfect for me! If it works!!
Thanks
Tobi

yes I can programm the vlan's over CLI. That's works. I have not tested this if its really works, but the VLAN's are programmed.
hmm I checked the STP / VTP settings with a second identical Switch, but there are no differents. Made a backup of one Switch and restore on the other One, but I'm still not able to create VLAN's.
however, I contacted my vendor today, he tell me that it shouldt be a problem to take back the switch.
Best regards
Tobi

ESW-520-24-K9 and Cisco Network Assistant

HI,
Is this switch model ESW-520-24-K9 is supported by Cisco Network Assistant.
In the leatest release notes of CNA are supported Catalyst Express 520 Series Switches and this model WS-CE520-24TT-K9 is on the supported list.
But the mention model above is EoL and the new one is ESW-520-24-K9.
Thanks,
Kamil

Hi Dave,
Thanks for your replay.
Yes, you are right that this switch model is supported by CCA but not by Cisco Network Assistant.
These programs are different in functionality.
The situation has become clearer, since the customer bought the Cisco Catalyst 2960 series switch.
Kamil

Wrong Port Statistics in Cisco Network Assistant

Hello,
I'm having some troubles with CNA (version 6.0). There's a few switches in the network that displays wrong information about sports activities/statistics. I've got some ports administratively down, without activity, however CNA is showing Tx and Rx rates, etc. I've already cleared counters from the application and from CLI too. If I do "show interface Gix/x/x" in the CLI, it returns results that I waited, but not in CNA, where it's showing wrong information. Moreover, some ports which should have activity and statistics, don't displays info. All rates and statistics shows 0 when I'd must see any number except 0.
I'm talking about a stack with 3 Catalyst 3750-X 48P.
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.0(2)SE5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 25-Oct-13 12:38 by prod_rel_team
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)
Thanks,
Kind regards,

In Cisco Network Assistant, under smart ports, if I configure the switch port as Cisco Wireless/Router, it hard codes the interface as Trunk.In this particular case what is the reason for hard coding it as trunk?
When you are dealing with autonomous wireless access point, it's very common to have mutiple VLANs configured in the WAP, therefore you need a Trunk switch port.
You can also configure the trunk port to allow VLANs of your choice.

Support Cisco Catalyst 6880 in Cisco Network Assistant

Hello, tell me, when will support cisco catalyst 6880 in Cisco Network Assistant?

No it doesnt support.
Ref:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html#73942
HTH
Inayath
*plz dont forget to rate if this info is helpfull.

Are the SG500P SMB switchs supported for Cisco Network Assistant?

Hi, we need to enroll some SG500-28P switches to a CNA? Is this possible? I suppose that CDP feature allow this. Actually, i have installed CNA Ver. 6.0. Thanks in advance.

Hello Fernando,
Thank you for visiting the Cisco Support Community!
Here is a list of all the devices supported by the Cisco Network Assistant for the 6.0 version and later. Many of the 500 series switches, including the SG500-28P Managed Switch, are supported by the CNA. This page will also give you any additional information you may need such as the features of the CNA 6.0 version, any system requirements, and more.
If this post was helpful, please remember to mark this question as resolved to help others in the community! If you have any further questions, please do not hesitate to ask!
Best,
LP

Cisco Network Assistant doesn't start correctly

Hi!
A bit of background:
We've been replacing our 'old' Catalyst 3550 boxes with 3750 Switches, and since the web-interface on these are 'a bit lacking' in functionality(to say the least), we figured that CNA(downloaded latest version) would be just the thing...
Except, when we try to start it, we get this message:
Read/write access problems:
Ingen tilgang
=======================================
Note: Read/write access is required for user home directory and installation directory:
C:\Documents and Settings\BOFH
C:\Programfiler\Cisco Systems\Cisco Network Assistant
=======================================
'Ingen adgang' is Norwegian for 'No access'.
Also, I've altered my profile name in the message(No need to give away login name, is there? :-)
Now, my PC is set up according to 'best practices' for a SECURE NETWORKED PC In an office environment.
In other words, my user doesn't have write access to any folder in the %Program Files% areas, and that's the way we like to keep it...
So, Who goofed up the software, and how do I get around it without compromising the security of my PC?

That is NOT a solution.
The reason why a user shouldn't have write access to the \program files\ folder is that it contains EXECUTABLE BINARIES, which many virii likes to infect.
Moving the install to another folder and giving a user write access to that just moves the problem to another place.
What COULD help is a list of subfolders(which doesn't contain binaries or other easily-infected files) or files which the program needs to have write access to, or an updated version which stores its config data somewhere else...

2960S-48FPD and Cisco network Assistant

Hi all,
I'm using Cisco network Assistant V5.5 and when I try to discover WS-C2960S-48FPD-L I have this message :
Unsuported device type ... cannot add device to commuity
Any have a solution to that problem ??
Thank's, Laurent

Hi Laurent,
This switch is not supported by Cisco Network Assistant yet.

WS-2960-48TC-L and Cisco Network Assistant

Hello all!
I have WS-2960-48TC-L in
#show ver
Switch Ports Model SW Version SW Image
* 1 50 WS-C2960+48TC-L 15.0(2)EZ C2960-LANBASEK9-M
In Cisco Network Assistant (ver. 5.8.(9.1)) I can not add a switch to the community? And Why in Model string we have + (plus) but not - (dash)
Sorrry for my bad English.

Hi Dave,
Thanks for your replay.
Yes, you are right that this switch model is supported by CCA but not by Cisco Network Assistant.
These programs are different in functionality.
The situation has become clearer, since the customer bought the Cisco Catalyst 2960 series switch.
Kamil

What's the username & password when i connect device from cisco network assistant

what's the username & password when i connect device from cisco network assistant?
http://i200.photobucket.com/albums/aa273/wallfire02/Capture_zpsa8f5fd2b.jpg

Although that may be true...
If I click the "Connect As..." button it asks for a username and password.
I've experienced connecting to other user's computers on a network. To gain access to their computer, I just use their username and password. I've done this before to transfer files without using a flash drive or burned disk.
I'm trying to find out what I'm supposed to log on as to gain access to this device...
My point is that yes, I'm connected to it by wifi. Otherwise it wouldn't show up; ha-ha!
Is my point really that hard to grasp?

Cisco Network Assistant (CNA) Error: Connect

Best regards community,
Please I need your help, I installed Cisco Network Assistant 5.8 (9.1) for manage some catalyst switches as 2950, 2960, 2960S, 2960X, 3750X. I can manage all devices except WS-C2960X-24TS-LL model, I have following message from CNA: "Error: Connect Index: 26, Size:26". This device have same configuration for level 15 access as other devices with user name and password. the catalyst switch IOS version is 15.0(2)EX4
This problem is about either software or hardware? How can solve?
Thanks in advance

You're welcome.
I know the product team monitor the Network Management Forum. If you post your question there, one of them may pick up on it.
The CNA support typically lags the new product release by about 4-6 months, sometimes longer depending on how well the hardware product release matches up with the network management product's latest release date. The 2960XR just started shipping in July 2013 so a good guess would be that CNA might support it in the next release (5.9?). That's just a guess though.

Cisco Network Assistant gui is erratic 5.6.3

Cisco Network Assistant opens up fine, but i have to click and/or mouseover the center to be able to see the pop-up to connet to a device or comunity
it is strange
OS Name:                   Microsoft Windows XP Professional
OS Version:                5.1.2600 Service Pack 3 Build 2600
OS Manufacturer:           Microsoft Corporation
OS Configuration:          Standalone Workstation
OS Build Type:             Uniprocessor Free
System Manufacturer:       Acer
System Model:              TravelMate 290
System type:               X86-based PC
Processor(s):              1 Processor(s) Installed. x86 Family 6 Model 9 Stepping 5 GenuineIntel ~1 298 Mhz
Total Physical Memory:     2,031 MB
Available Physical Memory: 745 MB
Virtual Memory: Max Size: 2,048 MB
Virtual Memory: Available: 1,997 MB
Virtual Memory: In Use:    51 MB
thanks

Hi Luis,
Few questions :
- is it the same on all machines you tested CNA on ?
- is this an upgrade from a previous (and working) version ?
- is it the English version of Windows, or a localized one ?
Regards,
Marc

Cisco Network Assistant MAC auth issue

I have few Autonomous Access Points all managed by the Cisco Network Assistant. Users have access to wireless only based on MAC authentication.
Every once in a while the wireless access to the Access-Point fails and the following error is showed in the Cisco Network Assistant.
ERROR: The MAC address filter 700 used for association access was not created by the web interface and cannot be displayed.
also
WARNING: Filter 700 was configured on interface Dot11radio 0.170 using CLI. It must be cleared via CLI to ensure proper operation of the web interface.
The Network Admin does not use CLI but this problem keeps coming. To fix this problem I had cleared the access-list 700 via CLI and created a new access-list 700 via Cisco Network Assistant. Adding all the MAC's each time the network goes down is a cumbersome process. Is there a solution for this?
Thanks in advance
error snapshot attached.

I have some site admins that use CNA. I just upgraded their LAN to 3560v2 switches running 12.2(58)SE2 and had them upgrade their CNA software to CNA 5.7(6). They reported the same error.
I think you clearly indentified the problem. At one time the IOS command parser accepted both "show mac-address" and "show mac address". At some point IOS stopped accepting the older "show mac-address" format, and CNA is still issuing this command regardless of the IOS version it is trying to manage.

Cisco Network Assistant C4948E

Similar Messages

Maybe you are looking for