Cisco Nexus 5596 does not boots up after NX-OS upgrade 5.1.3.N1.1 to 6.0.2.N2.5 [CSCun66310]

Hello Friends,
Just want to save your precious time & effort, while doing Nexus 5596 upgrades so wanted to share some useful info which you can have a look prior to your upgrades of Cisco Nexus 5596 device.
I recently ran into trouble when upgarding one of datacenter switch Nexus 5596 does not boots up and after investigation from Cisco TAC it comes out to be Bug documented below.
https://tools.cisco.com/bugsearch/bug/CSCun66310/?reffering_site=dumpcr
My Upgrade path of device was : 5.1(3)N1(1)  to  6.0(2)N2(5).
Since this upgarde involves upgrade of Bios and Power sequensor, I was having some doubts to get this succesfully upgraded,  But there was more twist involved in this upgrade which I came to know after contacting Cisco TAC for my died Nexus 5596 device and got info that if you have below impacted version in your Nexus 5596 device and you are planning to do Upgrade, then you migh RUN into this serious BUG aftre which device won't come up at all and only Option left is to replace with RMA device.
PID                            Impacted                   Hardware versions      Updated Versions
UCS-FI-6296UP                                            1.0                                       1.1
N5K-C5596UP                                              1.0                                        1.1
N5K-C5596T                                                 1.1                                         1.2
You can check hardware version using below command from your device.
5596# show sprom sup | inc H/W
H/W Version     : 1.1
So please be carefull when planning your Nexus 5596 upgrade and verify above things as this Bug is not present anywhere in Upgrade docuemntations unfortunately.
Hope this will help and save someone's precious Time.

Today "upgraded" our switch (N5k-C5596UP) to from 5.1(2)N1 to 7.0(5) and after reboot no life from the switch either. Even no console response. show sprom sup | inc H/W shows 1:0.
Only thing we could do is RMA the switch. So what must I do with these switches? Have still to do 3 of them.

Similar Messages

  • Cisco 7941G phones will not boot up after factory reset.

    Cisco 7941G phones will not boot up after factory reset.
    The following happens.
    1. Speaker light lit (Green)
    2. Phone displays a firmware upgrade page (see attachment) for a few minutes. (Doesn't seems to be upgrading, but it "saids" upgrading)
    3. Saw Cisco logo with a Java Powered page.
    4. The whole thing loops again and again...
    I think the reason why the phone isn't booting up is because the phone needs to know where to find the configuration/firmware files from a tftp server. I do have a TFTP server, but normally I need to go in settings to change the alternative tftp server, but the thing is that now I can't even press the settings button...
    Please help.

    How many phones were reset and upgrading at one time? What is the setting of the TFTP Maximum Serving Count (Advanced TFTP Service Parm) on each of the TFTP servers?
    Sounds like too many devices trying to use TFTP at once.

  • Satellite M30-107 does not boot correctly after Recovery disk usage

    Hi
    I've recently got hold of a second hand toshiba Satellite M30-107 laptop, and decided to freshen it up.
    I used the toshiba recovery disk, but after doing so the laptop no longer loads windows.
    When turned on it shows the Toshiba start up disk for about a second then goes to a blank screen and freezes.
    When turned off and on again a screen comes up reporting an error in shutting down and gives the options to start in safe mode etc. but choosing any of the options causes the machine to freeze.
    Any help or advice would be much appreciated.
    Thanks
    jt

    Hi
    Sounds a little bit like the notebook does not boot due to the Windows software issue
    Did you recover the M30 with the original Toshiba recovery CD which was supplied with this M30 unit?
    Maybe Im wrong but for me it looks like a wrong recovery CD was used and an image with non compatible drivers was installed
    You could try to install the OS from original Microsoft Win XP CD and could check if it would be possible to get the notebook ruining using clean OS.
    In such case we ( you and me ;) ) could find out if this issue could be related to the software or hardware.
    Bye

  • Ipad does not display charging after ios 6 upgrade plugged in

    After upgrading to iOS 6 OTA my iPad does not appear to be charging when plugged in using the default charging cable plugged into the AC outlet.  The battery icon has a lightning bolt through it as if it is not plugged in. 
    I did a reset and this did not solve it.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • X220t does not boot anymore after a few times running, does not get past BIOS

    I just bought a x220t and want to use it with Win8.1. I had before upgraded my x201t to win8 with no problem at all.
    After a few succesfull runs in wich I do the patching it stops booting completely. I can't even push F8. It will only go to Bios in witch I have fidled a bit, but nothing works. I have tried a fesh install for three times. It does boot an USB DVD drive with the origiganal win 8.1 disk, but it can't fix my problems.
    I have an I7 version whith Intel 160GB ssd. I did a lenovo check, all clear, I dit an Intel SSD check, all clear. Unfiortunatiely I have delated the restore partition. I am on the latest BIOS (1.39)
    Sometimes I get in to the Lenovo boot menu, with no result. I want to rip out my hairs!
    Any help?

    Hi thomas1921,
    Not an answer to your specific question, but I'm very surprised that a BIOS update would break DVD booting. Have you tried pressing F1 at boot to get to BIOS Setup and examining / changing the boot order? Or pressing F12 at boot to select the boot device? (Think the F12 feature must be enabled in BIOS Setup.)
    Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
    Did someone help you?
    Say thanks! with a kudo.
    Even better: Pay it forward, help someone else.

  • HELP ME T23 does not boot anymore after installing a Lenovo update. Any idea?

    Hi, I installed the updates and later I shut down the laptop as requested. Later that day I wanted to start it again but nothing happend other than the little round green light next to the switch button goes on. The monitor stays black. I removed the batterie and plug (the batterie is dead anyway) but that did not help. I believe my harddrive made noise lately, too. Is that the end?

    I was able to eject the dvd by pressing the usb mouse left button while booting. Then put it back in after a reboot
    After that selecting the alt-key, i selected the install dvd, and after a while (gray background and spinning weel) it took me again to the installation screen.
    Will tell you if it is working in a while...

  • IMac 24" does not boot up after Installing 10.6

    Hi,
    Last night i did the upgrade, well i put the dvd and clicked install, it rebooted, install everything.
    Then i saw the screen saying that the install was completed (hope it meant: upgrade!!!).
    But then, i just see the white background a the little circle running... after 1 hour same thing... So i shut it down, and restart, same thing ?
    What is going on ? The installation manual was not clear about performing an update !
    Any idea how i can fix this ?

    I was able to eject the dvd by pressing the usb mouse left button while booting. Then put it back in after a reboot
    After that selecting the alt-key, i selected the install dvd, and after a while (gray background and spinning weel) it took me again to the installation screen.
    Will tell you if it is working in a while...

  • Windows 2012R2 does not boot automatically after BSOD

    I have a Windows 2012R2 server with some critical applications.
    Sometimes one of that applications causes BSOD. It doesn't matter why - I need the server to reboot and continue running without manual intervention. Instead of it server restarts and then stays on "Choose an option" screen (with Continue/Use
    a device/Troubleshoot/Turn off your PC options).
    After that I need to go to server room and press Continue manually. It is not an option for me because it can happen during the night and server will not be operational until the morning. Is there the way to skip that screen automatically?

    Hi,
    Thank you for posting your issue in the forum.
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Thank you for your understanding and support.
    Best Regards,
    Justin Gu

  • FCP Studio will not boot up after Snow leopard upgrade.

    Everything was working fine on Leopard but decided to upgrade to Snow Leopard. Now the program stats up and we get to the splash screen then it quits. Anybody help me? so far Snow Leopard has been a complete waste of time, After effects on Mac will not work now either.

    They all work except FCP 6 and After effects cs3. FCP is my main worry. I have a deadline to finish.

  • Satellite L70-A-11C does not power on after 4GB RAM upgrade

    Hello,
    I wanted to add 4GB RAM and I've taken a DDR3 1600 MHz SoDimm from Corsair.
    When the RAM is plugged alone or with the original RAM, the laptop does no start at all!
    I tested this RAM with a other laptop and the RAM works perfectly.
    I suppose that only the DDR3L type (1.35V) is accepted and not the DDR3 (1.5 V). Can you confirm?
    Do you recommend a specific brand or a type of DDR3L which is for sure compatible with the Satellite L70-A-11C?
    Thx in advance
    CortX

    Hi
    As far as I know the compatible 4G RAM module from Toshiba has the part number +PA5104U-1M4G+
    The Toshiba PA5104U-1M4G module is exactly the same like the module from Kingston +KTT-S3CL/4G+
    The Kingston KTT-S3CL/4G supports *1.35V* and therefore I assume that you have to use the modules supporting the 1.35V and the 1.5V modules would cause the mentioned problems.
    Hope this would help you to get the right RAM module.

  • Docky does not launch anymore after big system upgrade

    Hi,
    I get this when trying to launch docky:
    [1111@MNAME ~]$ docky
    Could not load file or assembly 'Mono.GetOptions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=0738eb9f132ed756' or one of its dependencies.
    Unhandled Exception: System.TypeLoadException: Could not load type 'Docky.Docky' from assembly 'Docky, Version=0.1.0.0, Culture=neutral, PublicKeyToken=null'.
    I have searched and found that mono update broke docky, but people say that the problem should be fixed with docky version 2.0.7, however, I have that version and still have the same problem
    Any help?
    thanks in advance

    I've tried to recompile it but when i try to run it, it crashes here
    [Warn 06:48:58.437] [DrawingService] Failed to load icon resource menu.svg from assembly Docky, Version=0.1.0.0, Culture=neutral, PublicKeyToken=null: Formato del file di immagine non riconosciuto
    Unhandled Exception: System.ArgumentException: Width / Height must be greater than 0 if icon is not a file or embedded resource
    at Docky.Services.DrawingService.LoadIcon (System.String names, Int32 width, Int32 height) [0x00000] in <filename unknown>:0
    at Docky.Services.DrawingService.LoadIcon (System.String names, Int32 size) [0x00000] in <filename unknown>:0
    at Docky.Services.DrawingService.LoadIcon (System.String names) [0x00000] in <filename unknown>:0
    at Docky.Services.DrawingService.IsIconLight (System.String icon) [0x00000] in <filename unknown>:0
    at Docky.Menus.DockMenu.SetLight () [0x00000] in <filename unknown>:0
    at Docky.Menus.DockMenu..ctor (Gtk.Window parent) [0x00000] in <filename unknown>:0
    at Docky.Menus.DockItemMenu..ctor (Gtk.Window parent) [0x00000] in <filename unknown>:0
    at Docky.Interface.DockWindow..ctor () [0x00000] in <filename unknown>:0
    at Docky.Interface.Dock..ctor (Docky.Interface.DockPreferences prefs) [0x00000] in <filename unknown>:0
    at Docky.DockController.CreateDocks () [0x00000] in <filename unknown>:0
    at Docky.DockController.Initialize () [0x00000] in <filename unknown>:0
    at Docky.Docky.Main (System.String[] args) [0x00000] in <filename unknown>:0

  • IPhoto does not start up after upgrading

    On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
    But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
    What can cause this problem?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • New MBP i5 does not boot after hard disk swap

    Hi there,
    I received my new i5 MBP today. After booting it once with the installed HDD to check if it's ok, I exchanged the hard disk for the one in my Late 2008 Macbook Pro. After doing this, my Late 2008 Macbook Pro boots fine with the (new) hard disk from the new i5 MBP, but the i5 MBP does not boot with my old hard disk.
    To give you some details:
    - I have installed 10.6.3 on the (old) hard disk that's not booting.
    - The i5 MBP boots fine from the installation DVD
    - Disk utility finds and can read my hard disk, no errors
    - PRAM NVRAM reset did not help
    - when booting in safe mode, I can see the system stop booting after or while loading Extensions.mkext
    My guess is, it tries to boot and load the wrong Extensions for the new system (CPU? GPU?). I have no idea how to fix this.
    Any help would be greatly appreciated!

    Focx,
    Welcome to Apple Discussions.
    Inserting the drive from an earlier model MBP will probably not work. The version of the system you have on that HD is designed for earlier hardware so when you put in in your new machine it's going to be recognized. What I'd recommend is re-installing the disk that came with the new machine and of course putting the 2008's disk back in the old machine. Then use Migration Assistant on the new machine and migrate your data from the old machine into the new machine.
    This will provide a much more stable system and should work just fine.
    Regards,
    Roger

  • HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

    My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
    Unable to bootstrap transaction group 2517: inconsistent crosscheck
    No valid commit checkpoint found
    The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
    Problems were encountered during repair of the partition map
    Error: Storage system verify or repair failed.
    (the same with 2518, 2519 and 2520 transaction group)
    I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • After installing 10.7.2 update the OS does not boot.Any thoughts????

    After installing 10.7.2 update the OS does not boot. I tried to recover from recovery hd disk but after 3 attempts I am still not able to download lion! Any thoughts????

    Try the Lion Community, and bookmark the notebook community (this is not).
    You will probably need to provide others with more information too.
    Cloned backup? TimeMachine? using Disk Utilityh to repair Lion from the recovery partition (comnand r on startup)

Maybe you are looking for