Cisco NX-OS and ASA Software Checker
Hi,
I'm sorry if I post this in the wrong section.
Currently we have a few Nexus switches and ASA Firewall in our network and I would like to check if there's any critical bug on the running OS/firmware on those devices.
May I know if Cisco has page to verify on this?
Bug Search Tool is what you want to use:
https://tools.cisco.com/bugsearch
You can also ask in the forums for those platforms.
This forum is to discuss specific bugs.
Similar Messages
-
Cisco Cean Access and Symantec (bad check)
Has anyone out there using CCA experienced the following issue where a requirement is set (any selected rule succeeds(AV updates)) and the users pass one of the selected rules but is thrown into the temporary access mode. The rule they are passing is "av_inst_SymantecClientSecurity_10_x_win_XP_2K". Has anyone seen this rule before??? Thanks for your response
You can go through the CCS FAQ
http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a97.shtml -
User from certificate with Cisco VPN client and ASA (and radius)
Hello,
we are trying to migrate a vpn client connection from GROUP to certificate. We want that client uses the user from the certificate and doesn't ask user, only password. Is it possible? Now, with user certificate, you can connect as another user if you know the user and the password of the other user with your own certifcate.
Thanks!
Santiago.mrbacklash wrote:
Ok with that being said will the MBA 11.6 1.4ghz have the guts to make it run mostly internet based programs over the VPN connection?
I think if you are running apps over the Internet the bottleneck will be the Internet and your VPN bandwidth. Your computer can certainly execute faster than Internet communications.
Besides, Internet or remote applications run on the remote server. All your local computer does is local processing of the data if necessary.
Message was edited by: BobTheFisherman -
What's the difference between 8.0 and 9.3 Cisco ASA software?
Is anyone show me the link with features of 8.0 and 9.3 Cisco ASA software? And what's the catch?
9.2(2.8) is what is known as an interim release of the software. Per Cisco interim release notes:
"They contain bug fixes which address specific issues found since the last Feature or Maintenance release. The images are fully supported by Cisco TAC and will remain on the download site only until the next Maintenance release is available. If you do not have a specific problem which is resolved by an Interim release, we recommend that you use the Feature or Maintenance release images.
Important: These images were not fully regression tested. Each individual fix was unit tested, and the image has had a limited amount of automated regression testing to confirm a baseline of functionality. Keep this testing status in mind if you decide to run them in a production environment. We strongly encourage you to upgrade to a fully tested Maintenance or Feature release when it becomes available."
Interim release notes are not generally published on the general product support page but if you go to the downloads page, there is usually a link to the release notes specific to the interim release.
Here is a link to the ASA 9.2(2.9) interim release notes. They describe the individual bug fixes rolled up in that release. -
Cisco call manager and ip phone software.
Hi everybody.
Does Cisco call manager also include software required for ip phone? Or software for ip phone needs to be installed on tftp server and it does not come with cisco call manager.?
thanks and have a great weekend.Hi Sarah,
by ip phone software, do you mean Cisco IP Phone Agent software?
if yes, then you need to have Customer Response Solution (CRS) and Call Manager together to setup ip phone software (services).
check this link for further info:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a00801c5765.shtml
plz Rate if it helped.
Soroush. -
NAT / PAT config conversion from PIX v6 to ASA Software 8.3 and above
Hi folks,
I'm currently working on converting some PIX firewall configs to ASA and wanted to check I was on the right track, as I don't currently have the ASA's so doing the configs up front!
Everything seems straight forward in the conversion and I've used the pixtoasa tool for some of it, but NAT is implemented differently on 8.3, the PIX was running v6 and I'm used to doing mainly static one to one NAT in ASDM.
The scenario that the PIX has 3 NAT groups which are mapped to 3 separate addresses, where multiple hosts are behint the NAT / PAT. Current config of the PIX is as follows (obviously the names are defined further up the config so this is an extract of the PIX):
global (outside) 1 10.50.50.38
global (outside) 2 10.50.50.39
global (outside) 3 10.50.50.49
nat (inside) 0 access-list no-nat-all
nat (inside) 2 Host_1 255.255.255.255 0 0
nat (inside) 2 Host_2 255.255.255.255 0 0
nat (inside) 2 Host_3 255.255.255.255 0 0
nat (inside) 1 Host_4 255.255.255.255 0 0
nat (inside) 1 Host_5 255.255.255.255 0 0
nat (inside) 1 Host_6 255.255.255.255 0 0
nat (inside) 1 Host_7 255.255.255.255 0 0
nat (inside) 3 Network_3 255.255.255.0 0 0
ASA Config
After a fair amount of reading up on this topic, I'm looking at changing the ASA config in software version 8.3 to the following - Also is it easier to just do this in ASDM? Looks pretty easy from youtube videos but rather have something to put on the box when I arrive at site NAT wise as opposed to working it out there!
Define NAT Objects (outside IP addreses)
object network NAT_1_outside_10.50.50.38
host 10.50.50.38
object network NAT_2_outside_10.50.50.39
host 10.50.50.39
object network NAT_3_outside_10.50.50.49
host 10.50.50.49
exit
Define NAT Objects (inside IP addreses)
object-group network NAT_1_Objects
network-object Host_4 255.255.255.255
network-object Host_5 255.255.255.255
network-object Host_6 255.255.255.255
network-object Host_7 255.255.255.255
nat (inside,outside) dynamic NAT_1_outside_10.50.50.38
object-group network NAT_2_Objects
network-object Host_1 255.255.255.255
network-object Host_2 255.255.255.255
network-object Host_3 255.255.255.255
nat (inside,outside) dynamic NAT_2_outside_10.50.50.39
object-group network NAT_3_Objects
network-object Network_1 255.255.255.0
nat (inside,outside) dynamic NAT_3_outside_10.50.50.49
Any assistance with this would be appreciated.
cheers
MalcolmI cannot make heads or tails of what your trying to accomplish in plain english first before looking at router setup.
If your talking about hosting servers behind the router on your private LAN (asssuming one public WANIP). Then one uses ACLs to control external users by individual OR GROUP and static NAT to port forward users to the correct server. One does not worry about groups of users for this direction of nat rule.
If what your saying is that you have a LAN and 3 different groups of users on the LAN that need to go to specific external IP addresses (external servers) then once again I would say you should ACLs to limit-authorize users and simply use NAT for port translation purposes. So conceptually speaking allow all lan users static nat, and then only allow group 1 hosts access to first external IP, group 2 hosts to second external IP, and group 3 hosts to third external IP. Note you will have to add a deny rule in firewall in general because normally higher to lower security interface is allowed by default.
Am I close......... before going any further need more details on the requirements nevermind setup. -
VPN with Cisco 877 and ASA 5505
Hi Experts
this is my scenario :
remote clients ----> Internet----> Cisco 877---> ASA5505---->LAN
i would like to allow remote users to connect to my LAN to chek their mails and work as they are in the office. Actually i have configured Cisco877 as VPN Server this is working Fine. but now i'm trying to use ASA with the router because it permit 25 connections at the same time.
i'm connected to internet using a public ISDN IP.i have heard that i need a second IP adresse for ASA ! and the ASA must act as VPN server and the router as Client, is that right ?
if i need to configure the link between the router and ASA how can i do it ? i can't find any document or example in the net :/
please i need your support to make this dream real lol.
i will poste my configuration step by step following your help.
many thanks.ASA need public ip address that is sure and also ASA acts as vpn. Client server will be remote not router. For that you can use any Ethernet. Trying to make a remote VPN connection via the cisco client, authenticate against an RSA Secure Token server and provide the client an IP address via DHCP.
-
Hi,
I am trying to update a number of items which the software check brings up:
It runs and says it is installing but at the end I get this error message:
BUT then I ge tthis:
Can anyone help me to enable the software to update?
ThanksThanks. Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
Think will have to take it into the store.....
thanks for replying. -
My MacKeeper says iPhoto is out of date. When I try to update it, the App Store says I need IOS 10.9 or later. I have 10.7.5 and when I check for updates my Mac says the OS software is up to date. How do I solve this problem??
1. First step to solving the Problem: Trash MacKeeper. It's a pile of trash that does far more harm to your computer than good.
https://discussions.apple.com/docs/DOC-3691
2. What version of iPhoto do you have? (iPhoto Menu -> About iPhoto) -
With Namit Agarwal and Rahul Govindan
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Adaptive Security Appliance (ASA) version 9.x (Context Aware Security and VPN Features) with experts Namit Agarwal and Rahul Govindan.
This is a continuation of the live webcast.
Cisco ASA CX (Context-Aware) is a next generation firewall service that serves as an extension to the Cisco Adaptive Security Appliance (ASA) firewall platform. In addition to the proven stateful inspection firewall capabilities, it provides us with next-generation capabilities and a host of additional network-based security controls for end-to-end network intelligence and streamlined security operations.
Namit Agarwal is a customer support engineer at the Cisco Technical Assistance Center in Bangalore, India. He has more than four years of experience in the security domain. His areas of expertise include ASA firewalls, IPS, and ASA content-aware security (ASA CX). He has been involved in various escalation requests from around the world. He holds CCIE certification (number 33795) in security.
Rahul Govindan has been an engineer with the Security Technical Assistance Center team in Bangalore for more than three years. He works on security technologies such as VPN; Cisco ASA firewalls; and authentication, authorization, and accounting. His particular expertise is in Secure Sockets Layer VPN and IP security VPN technologies. He holds CCIE certification (number 29948) in security.
Remember to use the rating system to let Namit and Govindan know if you have received an adequate response.
Because of the volume expected during this event, Namit and Govindan might not be able to answer every question. Remember that you can continue the conversation in the Security community, subcommunity VPN shortly after the event. This event lasts through November 1, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.
Webcast related links:
Slides from the live webcast
Video Recording of the live webcast
Introduction to Cisco Adaptive Security Appliance (ASA) version 9.x (Context Aware Security and VPN Features): FAQ from live webcastHello Namit and Rahul,
Here are few questions that came in directly during your live webcast hence posting them here so that users can benifit:
1) How is ASA CX different from other UTM solutions ?
2) How is dynamic application inspection of CX better than other inspection engines ?
3) What features or functionalities on the CX are available by default ?
4) what are the different ways we can run or install CX on the ASA platform ?
5) What VPN features are supported with multi context ASA in the 9.x release ?
6) What are the IPv6 Enhancements in the ASA version 9.x ?
Request you to please provide your responses to them individually.
Thanks. -
Macbook Pro, OS X 10.8.1 when start software update receive error msg NSURLErrorDomain error -1100, pls advise what is this error and how to check software update?
Thank you, best regards
SergeySeveral users are reporting a server problem with Software Update. Why not wait and try again later today or tomorrow to see if the problem is resolved.
If the problem is on your computer then give this a try:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist where "xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder) -
Can I format the CF in a cisco 1800 router and then use it on the ASA 5520?
Can I format Compact Flash in a cisco 1800 router and then use it on the ASA 5520?
You don't have to format the card in the router. You can do that on your PC. Just format the CF-card as FAT32 and plug it into the ASA.
BUT: If you just want to "upgrade" the old card with a different one, then first attach the original card from the ASA to your PC and copy all files (including the hidden ones) to your PC and then copy them back to the new card. That way you also move your licenses to the new card which are stored in hidden files and your private data like keys. -
I'm trying to update my software to iTunes 10.5.2. I click on the install button, click the Accept button, the software checks for updates, and then I am back at the original download screen. I can't seem to get past this loop. Any suggestions?
If I go through the setup that you suggested, won't I screw up the existing software on my system?
No. The iTunes installer will first uninstall the existing version of iTunes and then put in the new one. (That's actually also what happens when you use Apple Software Update to install a new version ... it just doesn't show the uninstall phase like the iTunes64Setup.exe or iTunesSetup.exe does.) -
Site to Site VPN Problems With 2801 Router and ASA 5505
Hello,
I am having some issue setting up a site to site ipsec VPN between a Cisco 2801 router and a Cisco ASA 5505. I was told there was a vpn previously setup with an old hosting provider, but those connections have been servered. Right now I am trying to get the sites to talk to the 2801. Here ere are my current configs, please let me know if you need anything else. Im stumped on this one. Thanks.
IP scheme at SIte A:
IP 172.19.3.x
sub 255.255.255.128
GW 172.19.3.129
Site A Ciscso 2801 Router
Current configuration : 11858 bytes
version 12.4
service timestamps debug datetime localtime
service timestamps log datetime localtime show-timezone
service password-encryption
hostname router-2801
boot-start-marker
boot-end-marker
logging message-counter syslog
logging buffered 4096
aaa new-model
aaa authentication login userauthen group radius local
aaa authorization network groupauthor local
aaa session-id common
clock timezone est -5
clock summer-time zone recurring last Sun Mar 2:00 1 Sun Nov 2:00
dot11 syslog
ip source-route
ip dhcp excluded-address 172.19.3.129 172.19.3.149
ip dhcp excluded-address 172.19.10.1 172.19.10.253
ip dhcp excluded-address 172.19.3.140
ip dhcp ping timeout 900
ip dhcp pool DHCP
network 172.19.3.128 255.255.255.128
default-router 172.19.3.129
domain-name domain.local
netbios-name-server 172.19.3.7
option 66 ascii 172.19.3.225
dns-server 172.19.3.140 208.67.220.220 208.67.222.222
ip dhcp pool VoiceDHCP
network 172.19.10.0 255.255.255.0
default-router 172.19.10.1
dns-server 208.67.220.220 8.8.8.8
option 66 ascii 172.19.10.2
lease 2
ip cef
ip inspect name SDM_LOW cuseeme
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp
ip inspect name SDM_LOW udp
ip inspect name SDM_LOW vdolive
no ip domain lookup
ip domain name domain.local
multilink bundle-name authenticated
key chain key1
key 1
key-string 7 06040033484B1B484557
crypto pki trustpoint TP-self-signed-3448656681
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3448bb6681
revocation-check none
rsakeypair TP-self-signed-344bbb56681
crypto pki certificate chain TP-self-signed-3448656681
certificate self-signed 01
3082024F
quit
username admin privilege 15 password 7 F55
archive
log config
hidekeys
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key XXXXX address 209.118.0.1
crypto isakmp key xxxxx address SITE B Public IP
crypto isakmp keepalive 40 5
crypto isakmp nat keepalive 20
crypto isakmp client configuration group IISVPN
key 1nsur3m3
dns 172.19.3.140
wins 172.19.3.140
domain domain.local
pool VPN_Pool
acl 198
crypto isakmp profile IISVPNClient
description VPN clients profile
match identity group IISVPN
client authentication list userauthen
isakmp authorization list groupauthor
client configuration address respond
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map Dynamic 5
set transform-set myset
set isakmp-profile IISVPNClient
qos pre-classify
crypto map VPN 10 ipsec-isakmp
set peer 209.118.0.1
set peer SITE B Public IP
set transform-set myset
match address 101
qos pre-classify
crypto map VPN 65535 ipsec-isakmp dynamic Dynamic
track 123 ip sla 1 reachability
delay down 15 up 10
class-map match-any VoiceTraffic
match protocol rtp audio
match protocol h323
match protocol rtcp
match access-group name VOIP
match protocol sip
class-map match-any RDP
match access-group 199
policy-map QOS
class VoiceTraffic
bandwidth 512
class RDP
bandwidth 768
policy-map MainQOS
class class-default
shape average 1500000
service-policy QOS
interface FastEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0$$FW_INSIDE$
ip address 172.19.3.129 255.255.255.128
ip access-group 100 in
ip inspect SDM_LOW in
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface FastEthernet0/0.10
description $ETH-VoiceVLAN$$
encapsulation dot1Q 10
ip address 172.19.10.1 255.255.255.0
ip inspect SDM_LOW in
ip nat inside
ip virtual-reassembly
interface FastEthernet0/1
description "Comcast"
ip address PUB IP 255.255.255.248
ip access-group 102 in
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map VPN
interface Serial0/1/0
description "Verizon LEC Circuit ID: w0w13908 Site ID: U276420-1"
bandwidth 1536
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type ansi
interface Serial0/1/0.1 point-to-point
bandwidth 1536
ip address 152.000.000.18 255.255.255.252
ip access-group 102 in
ip verify unicast reverse-path
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
frame-relay interface-dlci 500 IETF
crypto map VPN
service-policy output MainQOS
interface Serial0/2/0
description "PAETEC 46.HCGS.788446.CV (Verizon ID) / 46.HCGS.3 (PAETEC ID)"
ip address 123.252.123.102 255.255.255.252
ip access-group 102 in
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
encapsulation ppp
crypto map VPN
service-policy output MainQOS
ip local pool VPN_Pool 172.20.3.130 172.20.3.254
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 50.00.000.110 track 123
ip route 0.0.0.0 0.0.0.0 111.252.237.000 254
ip route 122.112.197.20 255.255.255.255 209.252.237.101
ip route 208.67.220.220 255.255.255.255 50.78.233.110
no ip http server
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip flow-top-talkers
top 20
sort-by bytes
ip nat inside source route-map COMCAST interface FastEthernet0/1 overload
ip nat inside source route-map PAETEC interface Serial0/2/0 overload
ip nat inside source route-map VERIZON interface Serial0/1/0.1 overload
ip nat inside source static tcp 172.19.3.140 21 PUB IP 21 extendable
ip access-list extended VOIP
permit ip 172.20.3.0 0.0.0.127 host 172.19.3.190
permit ip host 172.19.3.190 172.20.3.0 0.0.0.127
ip radius source-interface FastEthernet0/0
ip sla 1
icmp-echo 000.67.220.220 source-interface FastEthernet0/1
timeout 10000
frequency 15
ip sla schedule 1 life forever start-time now
access-list 23 permit 172.19.3.0 0.0.0.127
access-list 23 permit 172.19.3.128 0.0.0.127
access-list 23 permit 173.189.251.192 0.0.0.63
access-list 23 permit 107.0.197.0 0.0.0.63
access-list 23 permit 173.163.157.32 0.0.0.15
access-list 23 permit 72.55.33.0 0.0.0.255
access-list 23 permit 172.19.5.0 0.0.0.63
access-list 100 remark "Outgoing Traffic"
access-list 100 deny ip 67.128.87.156 0.0.0.3 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit tcp host 172.19.3.190 any eq smtp
access-list 100 permit tcp host 172.19.3.137 any eq smtp
access-list 100 permit tcp any host 66.251.35.131 eq smtp
access-list 100 permit tcp any host 173.201.193.101 eq smtp
access-list 100 permit ip any any
access-list 100 permit tcp any any eq ftp
access-list 101 remark "Interesting VPN Traffic"
access-list 101 permit ip 172.19.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 101 permit ip 172.20.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 101 permit ip 172.19.3.128 0.0.0.127 host 172.19.250.10
access-list 101 permit ip 172.19.3.128 0.0.0.127 host 172.19.250.11
access-list 101 permit tcp any any eq ftp
access-list 101 permit tcp any any eq ftp-data
access-list 102 remark "Inbound Access"
access-list 102 permit udp any host 152.179.53.18 eq non500-isakmp
access-list 102 permit udp any host 152.179.53.18 eq isakmp
access-list 102 permit esp any host 152.179.53.18
access-list 102 permit ahp any host 152.179.53.18
access-list 102 permit udp any host 209.000.000.102 eq non500-isakmp
access-list 102 permit udp any host 209.000.000.102 eq isakmp
access-list 102 permit esp any host 209.000.000.102
access-list 102 permit ahp any host 209.000.000.102
access-list 102 permit udp any host PUB IP eq non500-isakmp
access-list 102 permit udp any host PUB IP eq isakmp
access-list 102 permit esp any host PUB IP
access-list 102 permit ahp any host PUB IP
access-list 102 permit ip 72.55.33.0 0.0.0.255 any
access-list 102 permit ip 107.0.197.0 0.0.0.63 any
access-list 102 deny ip 172.19.3.128 0.0.0.127 any
access-list 102 permit icmp any any echo-reply
access-list 102 permit icmp any any time-exceeded
access-list 102 permit icmp any any unreachable
access-list 102 permit icmp any any
access-list 102 deny ip any any log
access-list 102 permit tcp any host 172.19.3.140 eq ftp
access-list 102 permit tcp any host 172.19.3.140 eq ftp-data established
access-list 102 permit udp any host SITE B Public IP eq non500-isakmp
access-list 102 permit udp any host SITE B Public IP eq isakmp
access-list 102 permit esp any host SITE B Public IP
access-list 102 permit ahp any host SITE B Public IP
access-list 110 remark "Outbound NAT Rule"
access-list 110 remark "Deny VPN Traffic NAT"
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.10.0 0.0.0.255
access-list 110 deny ip 172.19.10.0 0.0.0.255 172.19.3.128 0.0.0.127
access-list 110 deny ip 172.20.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 host 172.19.250.11
access-list 110 deny ip 172.19.3.128 0.0.0.127 host 172.19.250.10
access-list 110 permit ip 172.19.3.128 0.0.0.127 any
access-list 110 permit ip 172.19.10.0 0.0.0.255 any
access-list 198 remark "Networks for IISVPN Client"
access-list 198 permit ip 172.19.3.0 0.0.0.127 172.20.3.128 0.0.0.127
access-list 198 permit ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
access-list 199 permit tcp any any eq 3389
route-map PAETEC permit 10
match ip address 110
match interface Serial0/2/0
route-map COMCAST permit 10
match ip address 110
match interface FastEthernet0/1
route-map VERIZON permit 10
match ip address 110
match interface Serial0/1/0.1
snmp-server community 123 RO
radius-server host 172.19.3.7 auth-port 1645 acct-port 1646 key 7 000000000000000
control-plane
line con 0
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
scheduler allocate 20000 1000
ntp server 128.118.25.3
ntp server 217.150.242.8
end
IP scheme at site B:
ip 172.19.5.x
sub 255.255.255.292
gw 172.19.5.65
Cisco ASA 5505 at Site B
ASA Version 8.2(5)
hostname ASA5505
domain-name domain.com
enable password b04DSH2HQqXwS8wi encrypted
passwd b04DSH2HQqXwS8wi encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 172.19.5.65 255.255.255.192
interface Vlan2
nameif outside
security-level 0
ip address SITE B public IP 255.255.255.224
boot system disk0:/asa825-k8.bin
ftp mode passive
clock timezone est -5
clock summer-time zone recurring last Sun Mar 2:00 last Sun Oct 2:00
dns server-group DefaultDNS
domain-name iis-usa.com
same-security-traffic permit intra-interface
object-group network old hosting provider
network-object 72.55.34.64 255.255.255.192
network-object 72.55.33.0 255.255.255.0
network-object 173.189.251.192 255.255.255.192
network-object 173.163.157.32 255.255.255.240
network-object 66.11.1.64 255.255.255.192
network-object 107.0.197.0 255.255.255.192
object-group network old hosting provider
network-object host 172.19.250.10
network-object host 172.19.250.11
access-list 100 extended permit ip 172.19.5.64 255.255.255.192 object-group old hosting provider
access-list 100 extended permit ip 172.19.5.64 255.255.255.192 172.19.3.128 255.255.255.128
access-list 10 extended deny ip 0.0.0.0 255.0.0.0 any
access-list 10 extended deny ip 127.0.0.0 255.0.0.0 any
access-list 10 extended deny ip 169.254.0.0 255.255.0.0 any
access-list 10 extended deny ip 172.16.0.0 255.255.0.0 any
access-list 10 extended deny ip 224.0.0.0 224.0.0.0 any
access-list 10 extended permit icmp any any echo-reply
access-list 10 extended permit icmp any any time-exceeded
access-list 10 extended permit icmp any any unreachable
access-list 10 extended permit icmp any any traceroute
access-list 10 extended permit icmp any any source-quench
access-list 10 extended permit icmp any any
access-list 10 extended permit tcp object-group old hosting provider any eq 3389
access-list 10 extended permit tcp any any eq https
access-list 10 extended permit tcp any any eq www
access-list 110 extended permit ip 172.19.5.64 255.255.255.192 172.19.3.0 255.255.255.128
access-list 110 extended permit ip 172.19.5.64 255.255.255.192 object-group old hosting provider
pager lines 24
logging enable
logging timestamp
logging console emergencies
logging monitor emergencies
logging buffered warnings
logging trap debugging
logging history debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip verify reverse-path interface inside
ip verify reverse-path interface outside
ip audit name jab attack action alarm drop reset
ip audit name probe info action alarm drop reset
ip audit interface outside probe
ip audit interface outside jab
ip audit info action alarm drop reset
ip audit attack action alarm drop reset
ip audit signature 2000 disable
ip audit signature 2001 disable
ip audit signature 2004 disable
ip audit signature 2005 disable
icmp unreachable rate-limit 1 burst-size 1
icmp permit 75.150.169.48 255.255.255.240 outside
icmp permit 72.44.134.16 255.255.255.240 outside
icmp permit 72.55.33.0 255.255.255.0 outside
icmp permit any outside
icmp permit 173.163.157.32 255.255.255.240 outside
icmp permit 107.0.197.0 255.255.255.192 outside
icmp permit 66.11.1.64 255.255.255.192 outside
icmp deny any outside
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0
access-group 10 in interface outside
route outside 0.0.0.0 0.0.0.0 174.78.151.225 1
timeout xlate 3:00:00
timeout conn 24:00:00 half-closed 0:10:00 udp 0:10:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 24:00:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http 107.0.197.0 255.255.255.192 outside
http 66.11.1.64 255.255.255.192 outside
snmp-server host outside 107.0.197.29 community *****
snmp-server host outside 107.0.197.30 community *****
snmp-server host inside 172.19.250.10 community *****
snmp-server host outside 172.19.250.10 community *****
snmp-server host inside 172.19.250.11 community *****
snmp-server host outside 172.19.250.11 community *****
snmp-server host outside 68.82.122.239 community *****
snmp-server host outside 72.55.33.37 community *****
snmp-server host outside 72.55.33.38 community *****
snmp-server host outside 75.150.169.50 community *****
snmp-server host outside 75.150.169.51 community *****
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map VPNMAP 10 match address 110
crypto map VPNMAP 10 set peer 72.00.00.7 old vpn public ip Site B Public IP
crypto map VPNMAP 10 set transform-set ESP-3DES-MD5
crypto map VPNMAP 10 set security-association lifetime seconds 86400
crypto map VPNMAP 10 set security-association lifetime kilobytes 4608000
crypto map VPNMAP interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 20
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet 172.19.5.64 255.255.255.192 inside
telnet 172.19.3.0 255.255.255.128 outside
telnet timeout 60
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 60
console timeout 0
management-access inside
dhcpd dns 172.19.3.140
dhcpd wins 172.19.3.140
dhcpd ping_timeout 750
dhcpd domain iis-usa.com
dhcpd address 172.19.5.80-172.19.5.111 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection scanning-threat shun except object-group old hosting provider
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ntp server 128.118.25.3 source outside
ntp server 217.150.242.8 source outside
tunnel-group 72.00.00.7 type ipsec-l2l
tunnel-group 72.00.00.7 ipsec-attributes
pre-shared-key *****
tunnel-group old vpn public ip type ipsec-l2l
tunnel-group old vpn public ip ipsec-attributes
pre-shared-key *****
tunnel-group SITE A Public IP type ipsec-l2l
tunnel-group SITE A Public IP ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect netbios
inspect tftp
inspect pptp
inspect sip
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:
: endI have removed the old "set peer" and have added:
IOS router:
access-list 101 permit ip 172.19.3.128 0.0.0.127 172.19.5.64 0.0.0.65
ASA fw:
access-list 110 extended permit ip 172.19.5.64 255.255.255.192 172.19.3.128 255.255.255.128
on the router I have also added;
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.5.64 0.0.0.63
Here is my acl :
access-list 110 remark "Outbound NAT Rule"
access-list 110 remark "Deny VPN Traffic NAT"
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.10.0 0.0.0.255
access-list 110 deny ip 172.19.10.0 0.0.0.255 172.19.3.128 0.0.0.127
access-list 110 deny ip 172.20.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 host 172.19.250.11
access-list 110 deny ip 172.19.3.128 0.0.0.127 host 172.19.250.10
access-list 110 permit ip 172.19.3.128 0.0.0.127 any
access-list 110 permit ip 172.19.10.0 0.0.0.255 any
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.5.64 0.0.0.63
access-list 198 remark "Networks for IISVPN Client"
access-list 198 permit ip 172.19.3.0 0.0.0.127 172.20.3.128 0.0.0.127
access-list 198 permit ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
Still no ping tothe other site. -
Problem with Cisco 861W router and outgoing VPN
We have a Cisco 861W router that is blocking an outgoing PPTP on the internal access point only. The outgoing VPN works when the traffic is through a wired connection or the connection is on another access point. We fail to make a connection only when connection to the 861W's internal Access Point.
Here is the Access Point Configuration:
Current configuration : 2100 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname obap
enable secret 5 $1$.1RF$go1D7WITXUn3s8TUaw3tC.
no aaa new-model
dot11 syslog
dot11 ssid OLIVER
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 XXXXXXXXXXX
username XXXXXX privilege 15 secret 5 $1$Wc0K$OzcQDDQfjHP6La31eXMoG/
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm tkip
ssid OLIVER
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecti
ng AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.0.2 255.255.255.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
banner login ^CC
% Password change notice.
Default username/password setup on AP is cisco/cisco with priv¾ilege level 15.
It is strongly suggested that you create a new username with privilege level
15 using the following command for console security.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to
use. After you change your username/password you can turn off this message
by configuring "no banner login" and "no banner exec" in privileged mode.
^C
line con 0
privilege level 15
login local
no activation-character
line vty 0 4
login local
cns dhcp
end
obap#
Here is the Router's Configuration:
Current configuration : 5908 bytes
! No configuration change since last restart
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname obrouter
boot-start-marker
boot-end-marker
logging buffered 51200
logging console critical
enable secret 5 $1$i9XE$DjxFVAEC9nC4/r6EQKCd6/
no aaa new-model
memory-size iomem 10
clock timezone PCTime -5
clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
crypto pki trustpoint TP-self-signed-1856757619
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1856757619
revocation-check none
rsakeypair TP-self-signed-1856757619
crypto pki certificate chain TP-self-signed-1856757619
certificate self-signed 01
3082024D 308201B6 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383536 37353736 3139301E 170D3036 30313032 31323030
34345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38353637
35373631 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B1A4 FB786547 3D582260 03DB768D 116BDE9A 309FBA04 B53F77B0 BFE32344
7C3439B3 97192B36 760A9411 1D5C7549 8D86F532 ABA44F53 0D08B7F4 A9A747D5
071330C3 65BF25A8 927F3596 29BB5A80 90C8D169 22268476 3B8DDE1E FDB7170D
B4820D03 5580A849 A92C7E76 9AC10867 505A2FEE 64360741 7F9DBDBF 3D79982C
F81D0203 010001A3 75307330 0F060355 1D130101 FF040530 030101FF 30200603
551D1104 19301782 156F6272 6F757465 722E6272 75736868 6F672E63 6F6D301F
0603551D 23041830 168014D8 5BC2FFB2 967A4C7B 11B44122 5C8D31F7 749B9230
1D060355 1D0E0416 0414D85B C2FFB296 7A4C7B11 B441225C 8D31F774 9B92300D
06092A86 4886F70D 01010405 00038181 005901F1 C239074B B8213567 CF7B65BF
DAFE4557 69B2A3B1 5F2593C7 A54B9598 23FD5E7A 563AA6E0 AFB25801 FA0061E8
F9545372 DB600B3A BE68AE65 1EDA593E 6A0C96B8 5A4136AF 393F9AAC 651E1C36
B8B7C6C0 47936C24 D2ECE9A5 9446EE32 FC7461FA AD8CF1CE A7FBF341 07E9C3C6
505AB88D 0E7FCAFC 5792298A E5E4D1FE CC
quit
no ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.99
ip dhcp pool ccp-pool1
import all
network 192.168.0.0 255.255.255.0
dns-server 216.49.160.10 216.49.160.66
default-router 192.168.0.1
ip cef
no ip bootp server
ip domain name brushhog.com
ip name-server 216.49.160.10
ip name-server 216.49.160.66
license udi pid CISCO861W-GN-A-K9 sn FTX155281FY
username tech38 privilege 15 secret 5 $1$d/4Z$n/23EsXbzfHF5XfJ8Nv.y0
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description $ES_WAN$$FW_OUTSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
duplex auto
speed auto
pppoe-client dial-pool-number 1
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Dialer0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXXXXXXXXXX
ppp chap password 7 XXXXXXXXXXXXXXXX
ppp pap sent-username XXXXXXXXXXXXXX password 7 XXXXXXXXXXX
no cdp enable
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source static tcp 192.168.0.25 80 interface Dialer0 80
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
logging trap debugging
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
line con 0
login local
no modem enable
transport output telnet
line aux 0
login local
transport output telnet
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
privilege level 15
login local
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end
Any help would be appreciatedHello,
i have the same problem with router CISCO861W-GN-E-K9. Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Can someone help?
Thank you.
Here is my config for internal AP and router.
Maybe you are looking for
-
I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help? The firewire port reads the dj software and I can hear music playing through the sound card whe
-
Cannot open the Infoview error " HTTP 500 - Internal server error Internet
Hi All, I am new to Business Object XI, now i have a situation where i cannot open Infoview from one the four IBM web sphere, but i can open from rest of the there web sphere and all the other links are working properly in the same websphere. its giv
-
Error deploying in Studio when using 2 data sources
I have built a cube using multiple datasources in Essbase Studio. The sources are Oracle database and EPMA dimension server. When I deploy the cube, I receive the following error. However, when I deploy using one source and specify DSN, it works. It
-
When I try to open a premiere pro CS6 file I obtain the following message: How to solve this? Many thanks for the help.
-
I receive a notice saying my early access to synchro is OK. But it's not-
I restart my computer, nothing changes. What do I have to do to get my synchro and access to the fonts ?