Cisco ONE Software?

Hello,
I read about Cisco ONE Software launchin in 2015 , but it is not yet clear for me. Can anyone make it allitle clear to me , please?
also anyone know what exact date Cisco will start launching / selling it??
Thanks

yes you can
SAP

Similar Messages

  • Can I install 'Cisco connect' software on more than one PC in the network?

    Can I install 'Cisco connect' software on more than one PC in the network? Do multiple installs conflict? Who did try this before?

    yes you can
    SAP

  • Cisco connect software wants to match the admin password to cisco connect password?

    As much as possible i want only one SSID for my router, so i dont want to have another SSID for guest. To protect my router
    settings I need to have a different admin password from those of passphrase (i.e. wifi password).
    Why is it that cisco connect software wants to match the admin password to cisco connect password?
    The cisco connect password is the same as the passphrase. I think its unsafe to have similar passes for both admin password
    and passphrase.
    Is there any way that cisco connect software would work under different admin password & passphrase?

    From what I can tell, the router is set up so that it broadcasts two seperate SSID's with two unique passwords.  If you logon to the SSID-Guest network, you are not allowed any kind of Admin access to the router.  If you attempt to use the Cisco Connect software, you'll eventually get an error saying that it could not find a network (unless there is an unconfigured router running factory defaults in range).  I verified this using a Cisco Linksys E4200 and a few laptops.
    So long as you utilize the guest network properly, you should be able to maintain security on your network and use Cisco Connect.  Obviously this isn't ideal for most commercial use, but then again I don't know why you would want to use this software on that scale.
    If you are trying to keep one SSID for the network, I think you're going to have to use the web based service and do a little manual configuration.  
    TLDR:  Seta different password for the guest network and never give out the primary network password.  Guests don't have admin access, even while using Cisco Connect so long as they are connected to the -Guest SSID.

  • Cisco Connect Software

    Since upgrading to Mountain Lion, I can no longer use my Cisco Connect Software to manage my wireless network.  I get the following Error Message: 
    The router software supports these operating systems:
    - Mac OS X 10.5.8 or later
    - Mac OS X 10.6.1 or later
    - Mac OS X 10.7 or later
    Any help would be appreciated.
    Message was edited by: vatkins1906

    As you might know by now, Cisco Connect might not have an upgrade since Cisco basically came out with a new application named "Cisco Connect in the Cloud". This one need a firmware upgrade on your router first to Ver.1.1.38.138880 wich you will find at http://homesupport.cisco.com/en-us/support/ccc.
    Connect in the cloud is not bad, not great either but do as much as  the regular Connect and some but this time from anywere you have internet access. The Con is that you will never be able again to use the typical settings using the IP address of your router. Yap you read righ, never again unless you decide to roll back the firmware to the previous version. Cisco have instructions have to do it. Other Cons at least for me is that the download speed came from almost 12 mbps to 2 mbps. At least that what the speed test show, but i have not seen the reduce speed in real. My web access still good and super fast. If i connect directly to the modem shows almost 12, connect to the router 2mbps. Wierd.
    Any way good luck

  • How to install All-In-One software with network printer?

    I plugged my 7310xi into my Linksys WRT54G router. In Windows 7 64-bit I found the printer, installed the default drivers, and it's printing happily via the network.
    But I need to install the HP All-In-One software if I want more advanced functions like scanning to my computer. 
    Downloaded the software from the web. During installation I get to the part where it asks me to choose how the printer connects to the computer. I select "through the network," click next,and it just keeps on kicking me back to this screen and I can't proceed. Any ideas?
    Here's the error:
    Now Launching=X:\hpzdui40.exe -I XXX -f X:\DIVins??.DAT
    fail to load library X:\hpzscb01.dll
    CNetworkUIPlugInApp::InitInstance fail to initialize sacabod. Result = o;
    GetLastError = 193
    RUN: Driver UI Plug-In exits returning 50
    Exit code=50
    I've set it to run in Vista compatibility mode and Run as Admin.
    Message Edited by fuzzybabybunny on 08-06-2009 11:59 AM

    I had exactly the same problem with Windows 7 64-bit and HP Photosmart 2610xi. All you need to do is right click on the installation program, go to properties, go to compatibility mode, select Windows Vista SP2 and optionally check run as administrator. It worked after that.

  • Problem installing Photosmart C6180 All-In-One software

    I've "googled" and found several similar installation issues but none quite match mine.   When I attempt to install the All-In-One software, I receive a dialog box error "The system cannot find the file specified."   The file that it is attempting to find is found in the Dialog window heading:
    c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksys...
    Using %temp% I am able to verify that the 7zS52C3 folder structure exists.  However the ",sourcepath.setup" folder shown above is incorrect.  it should be just "setup".  
    I've ran this install several times under  different accounts, including creating a new admin account.
    I've cleared all temp files, removed tsr files using msconfig as described and cannot seem to solve this issue.  I even renamed the setup folder to ",sourcepath.setup" to see if this would solve the install but it failed on another file.
    I am running Windows Professional x64,  My HP Photosmart c6180 is connected to the network and I am able to print properly to it from my computer.  I need the software primarily for "scanning to computer" functionality.
    Any help is appreciated.

    Hello @DirkPittP,
    Welcome to the HP Support Forums!
    I understand that when installing your HP Photosmart C6180 All-in-One Printer on your Windows 7 64 bit computer, you are encountering a 'c:\users\Myusername\AppData\Local\Temp\7zS52C3\,so​urcepath.setup\blocksysinstall.exe The system cannot find the file specified' error. I would like to assist you with this issue today.
    Now in your original post, I can see that you have already attempted installing the printer on administrator accounts, clearing the temp files, running an msconfig, and renaming the folder to no avail. At this time I would like you run the following steps to see if we can get this working for you.
    Step 1: Uninstall Drivers:
    First, I would like you to clean up your system of any software or drivers for your HP Photosmart that may have made their way onto your system during the failed installs. Rather than running the 'normal' uninstall process, I would like you to click here to download the Microsoft Uninstaller Tool.
    Once the website opens, please select the Run now button on the right hand side. Please follow through any recommended fix steps provided. When prompted, choose that you need assistance with 'uninstalling'. You will be brought to a list of populated programs from your computer. Scroll through this list until you see your HP Photosmart. Select your HP Photosmart and allow it to uninstall.
    This Microsoft Tool will also check your computer for any registry corruptions. Should any system corruptions be found, this Microsoft Tool will fix those corruptions for you.
    Once the uninstall has completed, please close the Microsoft Tool and proceed to the next step.
    Step 2: Clear the Temp Files:
    Click on your Start menu
    In the 'search programs and files' box type %temp% and hit enter
    In the Temp folder select Ctrl + A at the same time on your keyboard to highlight everything
    Select the 'delete' button on your keyboard. If you get a pop up to skip an item, just skip it.
    Once the Temp folder is emptied, close the window
    Right click on your Recycling Bin and select Empty Recycling Bin
    Step 3: Download Drivers:
    Please click here to download the latest drivers for your printer.
    Once the website opens select the Download button on the top left
    Allow the download to Run
    Once the download has completed the installer will automatically extract
    After the extraction if you get the error again for 'blocksysuserinstall.exe' take note of the temp folder 7z . . .  number sequence it refers to this time around.
    Step 4: Rename Temp 7z Installer package:
    Click on your Start menu
    In the 'search programs and files' box type %temp% and hit enter
    In the Temp folder locate the 7z . . . folder that shows in there
    Right click on the 7z folder and left click on 'rename'
    Rename the folder to the 7z. . . to the name that the 'blocksysuserinstall.exe' points to
    NOTE:  Ensure that you are logged into the same User Account that the error points to: "c:\users\Myusername\AppData . . . " when you make the change to the 7z folder. There shouldn't be any  'sourcepath.setup' folders at all.
    Step 5: Install Printer:
    Once the 7z folder is renamed to the name the error wants than click on the 7z folder to open it
    Scroll down to the bottom of the installer files
    Double click on the setup.exe file at the bottom. It may show an HP logo to the left of it
    An installer window should pop open
    Follow through the with the onscreen instructions to reinstall your printer
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!  
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Help! Why is there a on one software  "X" popping up when I select a menu item (ie, file, edit)?

    I started up my photoshop CS4 today, same as usual, havent changed anything on my computer since the last time I used my PS, then I select File to open a recent file and a pop up come up with On One Software and an "X". Doesnt say anything else, and you have to push the close window "x" a lot of times to get rid of it, then then I selected File again and gibberish in a thin drop down (I memorized which one I need, so I knew which one to click) shows up. I downloaded the latest flash player (not sure if this is relevant but i gave it a shot, Im not much of a guru) and nothing has changed. Please help and if you can put it in lameman (sp?) terms that would be super, thanks in advance!

    Thanks anyway, I figured it out, had to delete the onOne library files...which I can remember doing before, so Im not sure why this became a problem again.

  • Cisco connect software for MAC OSX 10.8.2

    Cicso,
    Please hurry up with releasing Cisco Connest software for MAC OSX 10.8.2
    Mine doesn't work anymore with the wireless Linksys router E3000

    I think we just need to wait until they update the software that will be compatible with this router. Who knows Cisco will be able to read this thread.

  • Installati​on fail for HP c4780 in All in One software Windows 8.1

    I downloaded and attempted to install
    PS_AIO_06_C4700_140_408
    into Windows 8.1
    The install fails part way through with the message box
    Message box header contains:   ....\Setup\hpzsh...
    Message box content displays: The system can not find the file specified
    Clicking close ends the the install with no further messages.
    I attempted to use HP Print and Scan Doctor.  The software apparently identifies the C4780 with the help of an installed basic printer driver (which also indicates that it can not find the specificed file and crashes but leaves a printer driver installed.  This basic printer driver allows me to pull up its web page).  HPPSD then indicates that it is downloading the appropriate All in One software.  Downloading commences but after several minutes then stops with a failed download message.
    I have to admit that I am rather disappointed with all the hoops I am having to perform to get a supposedly compatible printer installed.
    I'd appreciate some help.
    Thank you

    Hello jmayoral,
    Welcome to the HP Support Forums!
    I see you where able to locate a solution to the file not found error you got while installing the Photosmart C4780 on the thread: I cannot install my HP Photosmart C4780 - I can't install my drivers and the HP solution center. Was there anything else you need a hand with?
    Thanks for posting,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Manually managing E3000 / not using cisco connect software

    ok  now i have totally by pass the cisco connect  software, and manually managing my e3000 / updating the firmware manually  and i have the ssid disabled due to people trying to connect to our router all the time and our router is password protected (wpa/aes) i need to know if manually managing the network is a good idea or not i've manage other linksys routers in the network page, i am finally able to connect and i get my full download speed 10MB/Second  now  before i was getting 5MB/second and upload speed is at a good 1MB/second before i was getting 0.3MB/second are these good speeds or what i dont know i've also ran a few test - both the hdtv & xbox on at the same time running the same item (netflix's ) both at the same speed 

    For better wireless connection, use WPA2 with AES security.
    I think disabling the SSID broadcast will make any difference.
    You can also try changing the advanced wireless settings on the router.
    Connect the computer to the router with the Ethernet cable. Open the setup page of the router and go to Wireless tab. Click on Advanced wireless settings sub tab. Change the Beacon interval to 75, RTS and Fragmentation threshold to 2304. Save the settings.
    Click on Setup tab and change the MTU size to 1365.Save the settings and power cycle the router.
    Now observer the wireless connection and see if that makes any difference.
    Also make sure that your router is running on latest firmware.

  • Anybody worked on Bar-One Software for Bar coding?

    Hi Experts,
    Anybody worked on Bar-One Software for Bar coding?
    I have following questions
    Q)Is ZEBRA printer is necessary to print Bar Code using Bar One software?
    Q)If we dont have ZEBRA printer at least can we see the Print Preview after designing it?
    Q)I have created a sample script using one Barcode and tried for Print Preview, but not able to see the Preview.
    Please help
    Sameer

    Hi Sameer,
    Q)Is ZEBRA printer is necessary to print Bar Code using Bar One software?
        No.
    Q)If we dont have ZEBRA printer at least can we see the Print Preview after designing it?
        Check with the driver of the printer supportive for Bar-Codes Prinitng.
    Q)I have created a sample script using one Barcode and tried for Print Preview, but not able to see the Preview.
        Please check the driver of the printer.
    Whereas, without using Bar One Software also, you can print Barcode with the standard Barcode tech. available in SE73.
    Regards,
    Anmol Saxena.

  • When is the update for Cisco Connect software with OS X 10.8 Mountain Lion?

     @OfficialLinksys When will @Cisco_Support update Cisco Connect software with OS X 10.8 Mountain Lion compatibility?

    I believe all Mac users are waiting for that update but so far it is not yet available. We are yet to hear from Cisco for its official release for the software that is compatible already for Mountain Lion.

  • Cisco Connect software issue

    I am having problems trying to load the Cisco Connect application software from the CD.  I am able to connect to router, but the Cisco Connect software never loads to the hard drive.  Any suggestions?

    I think the Cisco connect software is running successfully but it is not giving you the option to lauch the Cisco connect utility. If you get the ' congratulations ' page that means it is running successfully.
    When you install the Cisco connect on your computer, it generally creates option on your computer to launch the utility.
    On windows computer you will find Cisco connect under All programs. Click on Start and go to All Programs and see if you can find Cisco connect.
    On MAC computer you will find Cisco connect under Applications. On your desktop, locate and double-click on the Macintosh HD icon. A window will then appear on your screen.  Select Applications from the left panel on this window.  This will display all contents under the Applications category.From the list of Applications, locate and double-click on the Cisco Connect icon.  This will launch Cisco Connect and take you to its main screen.
    If you are still not finding Cisco connect software on your computer then I will suggest you install Cisco connect after installing settings up your router manually.
    Uninstall Cisco connect from your computer if there is any. Follow this link to install Cisco connect after installing the router manually.

  • Cisco Connect Software Download

     I just purchased the E3000. I am trying to set up my laptop with Cisco Connect software but my CD seems to be broken now. Is there anywhere I can download it?
    Thanks
    Darlene

    If you want to see your router's settings, you don't have to use Cisco Connect.  You can use the web GUI for browsing settings using your web browser by logging in at http://192.168.1.1.  Then you'll see the administrative "dashboard", and by following the tabs to the settings that you want to look at, you can see everything. I'd also recommend downloading the user guide for your router from Linksys Support, if you haven't already.  This explains all the settings in the administrative GUI and will make it much easier to find what you're looking for. By the way, your English is perfectly understandable *smile*.

  • Can I assign one software component to multiple products

    Hi
    Let me know Can I assign one software component to multiple products if so explain me in detail.

    See this
    http://help.sap.com/saphelp_nw04s/helpdata/en/9e/35d022edd4d646a53a56a4da60f9db/content.htm
    <i>4. To view details about a software component, choose the Software Components tab.
    5.From the Software Component dropdown box, select the software component whose details you want to view.
    A table with software component versions appears.
    6.Select the software component version whose details you want to view. Choose one of the following tabs:
    General
    Displays general details about the software component version.
    Products
    <b>Displays the products, which contain the software component version</b>.</i>
    At this location u can see multiple products for one SWC
    Regards,
    Prateek

Maybe you are looking for