Cisco Operation Manager and Service Monitor on Separate Machine?

Hi,
Can we install Cisco Unified Operation Manager and Server monitor on separate machines?
What will be the procedure to do so?

Yes You can install Service Monitor in a stand alone server. For Service Monitor to coreside on a system with other applications in the Cisco Prime Unified Communications Management Suite, see the coresidence requirements in
Installation Guide for Cisco Prime Unified Operations Manager 9.0.
Also you can check Coresidence Guidelines and Coexistence Guidelines.
Here you can see the server requirements for a coexistent installation of Service Monitor:
http://www.cisco.com/en/US/docs/net_mgmt/prime/unified_service_monitor/9.0/install/guide/prereq.html#wp1080694
-Thanks

Similar Messages

CUOM and Service Monitor

Hi Everybidy,
I have CUOM 2.1 with Service Monitor installed. When i try to configure the sensor using service monitor, the web page giving HTTP 500 Internal server error. and also please advice from where do i get the configuration file for sensor( Cisco 1040 sensor- cnf file)
Regards
Nahas

HI,
Please remove Operation manager and then install again to fix the issue.
Thanks

Cisco Operations Manager

I have an issue to setup synthetic tests for a customer. Because of a bug in cube software we occasionally see that incoming calls are not possible before we choose another active cube gateway or restart the inactive cube gateway.
The issue is that we do not get an alarm when this problem occurs and we will not be able to detect the outage which affects all phones in this specific company.
My goal is to setup a synthetic end-to-end test from Cisco Operations Manager to perform random test calls to the customers call center numbers or main numbers. E.g. I would like to setup a test where incoming calls can be tested for success or not.
I am not sure if that is possible at all or if there would be some other ways to work around this.
Cisco Operations Manager 8.6

You need to make sure CUOM is like a station on the clients lan.
How you achive this is up to you. You can create a VPN towards the client networks.
I think its best to avoid NAT.
Cheers,
Michel

After installing and configuring Workflow Manager and Service Bus, I'm getting 403.

I've spent the day installing SharePoint 2013 on a Windows Server 2012 environment. This server is not the domain controller. Following instructions on how to install and configure Workflow Manager and service bus, it appears although I'm following the instructions
(and I get no errors), something is not working.
If I try to go to the website that it creates in IIS
http://localhost:12291 I get a 403 error. Also if I perform the powershell query to get the port number "Get-WFFarm | ft WFMgmtHttpPort" I don't get any value returned to me.
Until I validate that the Workflow Manager is installed and working, I will not attempt to pair it to the SharePoint 2013 farm. Which hopefully makes this a Workflow Manager question not a SharePoint issue.
Can anyone offer any suggestions please? Should I even get a valid webpage if I hit localhost:12291? According to one walkthrough I've looked at I should get an XML display of workflow and security configurations.

I experienced the same two issues mentioned in this thread today.
Regarding the proper XML not appearing at <workflowhost>:12291 I was experiencing the same with an error message in Chrome saying the caller lacked read permissions, and 403 in IE. I had checked IIS, database permissions and connections and more.
All of the setup messages and status checks were a-okay. I voted Zimo's comment as helpful because it cued me in to examine the service in Central Administration - where I found there was no administrator assigned to the workflow service. As soon as that was
done, the workflow host site was brows-able.
The resolution to SharePoint Designer not offering 2013 workflows as an option was in my case that there was an additional WFE on which I had not installed the Workflow Manager
Client. This is noted with a bright yellow box in the section about configuring workflow with HTTP here:
http://technet.microsoft.com/en-us/library/jj658588(v=office.15)
If puzzles are good for your BRAIN then SharePoint will keep it really healthy!
Ramona Maxwell MCPD
SharePoint 2010, MCITP
SQL Server 2008

Basic Network Monitoring for Cisco Operation Manager 2012

Hello,
Please bear with me as i'm new the Operations Manager 2012 world. I've just installed operations manager 2012 in our environment and i've setup a network management point. I've discovered my networking gear which is primarily cisco equipment. The devices
are appearing as CERTIFIED. It appears that they are HEALTHY however in most cases i'm getting some arbitrary monitors. I have a 6509 switch where memory and processor appear to be being monitored out of the box. I'm receiving alerts and everything.
My question is how do I turn on monitoring for other discovered components. I seem to understand I can make SNMP monitors under the authoring pane if i know the OID. That sounds like it'd be tedious work for such a simple and basic monitor. However I was
under the impression I would be able to monitor a lot of these components with a simple click of a button. Is this not the case? I'm primarily interested in monitoring the state and performance of particular interfaces as well as the state of the power supplies
in our switches. Is there a guide that explains the basic principles of this. What are my options?
Thanks!
-Brandon

Hi,
You will need to edit the discovery and broaden the range. You may use recursive discovery.
Recursive discovery will try to discover any other network devices it knows about through its Address Routing Protocol (ARP) table, its IP address table, or the topology Management Information Block (MIB) to grow the network map and present all applicable
devices to you for monitoring.
You can also filter out devices that you don't want to be discovered by using properties such as the device type, name, and object identifier (OID). This is a handy option if you wanted to quickly discover all the network devices in your network except,
a small number or some with a specific criteria.
In really large networks with a lot of network devices, keep in mind that there is a default limit of 1500 network devices that can be discovered recursively. You can of course tweak this limit to suit your environment if you wish, but for most people, this
won't be needed.
More details, please go through the article below:
http://kevingreeneitblog.blogspot.com/2012/07/scom-2012-network-monitoring-explicit.html
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Cisco call manager and ip phone software.

Hi everybody.
Does Cisco call manager also include software required for ip phone? Or software for ip phone needs to be installed on tftp server and it does not come with cisco call manager.?
thanks and have a great weekend.

Hi Sarah,
by ip phone software, do you mean Cisco IP Phone Agent software?
if yes, then you need to have Customer Response Solution (CRS) and Call Manager together to setup ip phone software (services).
check this link for further info:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a00801c5765.shtml
plz Rate if it helped.
Soroush.

Event ID: 1418 Operations Manager SDK service threw an exception

Hi
Today we have received the below event in application event viewer. I have checked connector service working without any issues.
We are using SCOM R2 with CU2 and we are using universal connector
Event Type:   Error
Event Source:   OpsMgr Universal Connector
Event Category:   None
Event ID:   1418
Date:       6/14/2012
Time:       5:09:58 AM
User:       N/A
Computer:   INDRMS1
Description:
2012-06-14 05:09:58.283 [Microsoft.SystemCenter.Interop.Framework.Modules.OpsMgrModule] ERROR Error 1:\nFailure message: Request to update alert ignored due to invalid TimeModified\n0cc6a0f1-08cc-4a44-9c2f-7461c97c9fbd\nMicrosoft.EnterpriseManagement.Common.ConcurrentUpdateException:
Request to update alert ignored due to invalid TimeModified ---> Request to update alert ignored due to invalid TimeModified
   --- End of inner exception stack trace ---\n\n
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
Help us to understand/troubleshoot on this issue.
Donald D'souza (http://donald-scom.blogspot.com/)

Hi,
Please check if you have applied the following update:
Systems Center Operations Manager 2007 R2 Connectors Cumulative Update 2
http://support.microsoft.com/kb/2274165
If the issue persists, please also check the Event Log on the server and see if there are any related errors.
I also noticed you were using SCOM 2007 R2 Cu2, please try CU6:
OpsMgr 2007 R2 CU6 rollup hotfix ships – and my experience installing it
http://blogs.technet.com/b/kevinholman/archive/2012/05/18/opsmgr-2007-r2-cu6-rollup-hotfix-ships-and-my-experience-installing-it.aspx
Hope this helps.
Thanks.
Nicholas Li
TechNet Community Support

Cisco Call Manager and MGCP Question

Hello,
I appreciate if somebody can help.
Scenario:
Site 1 PSTN E1----VG----Call Manager----VG--- PABX---Site 2 PSTN1 E1
I have configured a dialing pattern on Cisco call manager 6.xxxxxx to Send to VG on Site1
Both VG routers are using MGCP with call Manager.
The problem if from Site 2 tries to call 6xxxxxx the call manager is not routing the call to the VG in site 1.
I did debug ccapi inout and on Site 2 VG the call response was the number unassigned. This means that the call Manager is searching the directory for the destination but it is not searching the route patterns.
Any ideas to override this and ask the call manager to check it's destination pattern?
Thanks,

Problem solved. The VG in Site 2 was in a CSS that is not allowed to dial PSTN.
Regards,

Cisco Call Manager and LifeSize Endpoints

Hello dear support community,
last week I asked which version of Cisco Call Manager supports BFCP (https://supportforums.cisco.com/message/3966334).
Unfortunately I asked the wrong question.
As it turns out I just didn't need to know which version of Call Manager supports BFCP, which I know now, I also need to know if Call Manager is compatible with LifeSize systems?
Here is the setting, so you know what I'm dealing with:
The costumer uses Cisco Call Manager (Ver. 9.1) as SIP registrar for his LifeSize endpoints. The problem is, when he is making a video conference (via SIP) and he wants to share a presentation, the other side either sees him or the presentation, but not both.
We tried it with our Call Manager (Ver. 9.0) and some LifeSize endpoints. As soon as the LifeSize endpoint uses CUCM as SIP registrar, the option to share the presentation is completely gone.
I guess the costumer switched sources from cam to pc. That would explain why he just sees either video or presentation. But, as you might have guessed, it's not an acceptable solution for the costumer.
And yes, we made sure that BFCP is enabled for the endpoints.
So, what I'm asking myself and you is:
Is this known? And more important, is there a reliable workaround?
Thanks a lot in advance.
Best regards
Tobias

I've been down this road and when I asked the question Lifesize's stance was that it wasn't supported by THEM. I pointed out that CUCM now supports line-side BFCP but they essentially shrugged their shoulders. Either they are blatently disabling content sharing by virtue of using a SIP Proxy or they have a priorietary SDP/header that CUCM isn't passing through.
Either you can call Lifesize and shake them up a bit or you can wireshark the SIP dialog to see what the codec asks CUCM before disabling the sharing button. Once you know that you might be able to use SIP transparancy to pass the header through.

Hyperion 11.1.1.3 and Oracle Database on separate machines, any experience?

Hi,
anybody has experience on installing Hyperion 11.1.1.3 (and paths) on Windows 2003 Server with Oracle Database 11g installed on separate machine?
Is there any known issue?
thanks a lot
robo

Hi,
Many installs the Oracle database is situated on a separate server than the hyperion install, it is quite common.
As long as there is a good link between the machines you should be fine.
Cheers
John
http://john-goodwin.blogspot.com/

How to Install Forms11g and Report11g alone in separate machine

Hi All,
Can i Install Forms11g and Reports11g separately on a separate machine for development of forms and report purpose.
How can i achive this
Please need it urgently
Immediate responses will be really appreciated
Thanks in Advance
Gunisetty Venkatesulu

You can install IAS on the same machine that Oracle and IFS are on. Install IAS into a new Oracle Home (i.e. D:\IAS).
This worked for me.
I am still waiting to hear how (look for my post about 20 below yours) how to configure IFS to use the Apache Web Server that is part of IAS.
Good Luck.
Maybe one of these days Oracle will create an IAS discussion forum. This is my third request and I haven't heard anything back from them yet.
null

Cisco Security Manager and User-aware firewall rules

Hello !
I have a firewall ASA which is managed with CSM and I try to create some user-aware rules. To do this, I need to match CSM with an Active Directory server.
I added an AAA server group matching my Active Directory server in the Identity Setting menu from Security Manager Administration and when i click on "Test", I obtain the error message "Unsuccessful Bind prevented to fetch data, please reconfigure AAA server".
What can I do to solve this problem ?
Thank you !
Stephane

You can contact your local AM to get an evaluations version, this is related to the new 'restricted' downloaded access on CCO. You need to have a service contract assocaited for that 'specific' product to download software (I know it does not make sense in case of an evaluation).
And you also have the following alternate:
Note:
This download does not include CiscoWorks Resource Manager Essentials (RME). For customers that wish to also evaluate CiscoWorks RME or that prefer a media format rather than a large download, an evaluation DVD can be ordered from Cisco Marketplace. At http://www.cisco.com/pcgi-bin/marketplace/welcome.pl, navigate to the Collateral and Subscriptions Store and search for part number EVAL-CSMGR-4.0.
Regards
Farrukh

Solution manager and CCMS monitoring of remote database

I have Solution Manager 7 SP Basis 6 installed. I have oracle remote databases connected successfully. Under DBCockpit I see the instances I want to monitor. I can see the backup, tablespaces, etc. These remote instances are SAP Portal JAVA only version 7 but under the dbcockpit alerts only shows alert monitor. The database check and check conditions are in white. Is there a way to see these and be able to report on them? The CCMS tree under the local solution manager also shows these connected remote instances but they are also white in color as if inactive. All CCMS agents and saposcol are running perfectly on the remote systems. The stats tables have been built, the synonyms for the solution manager are in place. What am I missing?

Hi,
Please download that attachment "scripts_1139623.sar" provided in SAP Note 1139623 - Using transaction RZ20 to monitor remote Oracle databases.
Upon extraction of scripts_1139623.sar the following files you will get.
rz20_nonabap.sql
dbcheckora10_oltp.sql
dbcheckora.sql
Then Perform the below mentioned Steps to resolve your issue.
Step 1: Create tables DBCHECKORA and DBMSGORA:
sqlplus SAPSR3DB/<pwd>
SQL> @rz20_nonabap.sql
Step 2: Fill the table DBCHECKORA:
sqlplus SAPSR3DB/<pwd>
SQL> @dbcheckora10_oltp
Step 3: Create the synonyms (as user ora<sid>):
brconnect -u / -c -f crsyn -o SAPSR3DB
sqlplus "/as sysdba"
CREATE PUBLIC SYNONYM SAP_DBSTATC FOR SAPSR3DB.DBSTATC;
CREATE PUBLIC SYNONYM SAP_DBCHECKORA FOR SAPSR3DB.DBCHECKORA;
CREATE PUBLIC SYNONYM SAP_DBMSGORA FOR SAPSR3DB.DBMSGORA;
Step 4: Grant Privileges for OPS$<SID>ADM User for the above created Tables
sqlplus "/as sysdba"
grant all on SAPSR3DB.DBSTATC to OPS$<SID>ADM;
grant all on SAPSR3DB.DBCHECKORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBMSGORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTAIHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATIORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATTORA to OPS$<SID>ADM;
commit;
Step 5:
Now after successful execution of above mentioned Steps , in DBACOCKPIT (system configuration), try to save the Remote DB entry with "Collect Alert Data". It will be saved without any error.
If you find any errors, post the error contents as a reply of this thread message.
Regards,
Bhavik G. Shroff

E164 dialling through Cisco Call Manager and its Gate Keeper

Hello,
one of our customers has succesfully setup a few Polycom VSX Endpoints and they are registered to a Gatekeeper.
Calls can be made manually in both directions but if a IP Communicator/IP Phone calls a VSX the recent call list will only include the IP Address of the Gatekeeper and not the E.164 Number so calls cannot be returned.
Is there a way to configure this ?
I am unaware of the Version of the CCM.
Regards
Steff

configuration has two gatekeeper zones. An internal gatekeeper
zone and an external gatekeeper zone.
Devices registered to the internal zone can call devices on the external
Calls through H.323 address but not by e164 alias. However the devices on external zone
Can call devices on internal zone through e164 alias.
Call Manager is not involved in this problem.

Cisco Interaction Manager and PCCE

Having an issue trying to integrate CIM 9.0(2) with PCCE 9.0(4).
Emails are not being delivered to integrated queue's. Looking into the DB the activities are not being queued to CCE at all.
TAC is following the path that this is related to ECC variables being mis-configured.
Only issue is that since this is PCCE, ECC's are configured with deployment scripts and cannot be viewed or modifed since the tools are removed.
Did a full- reinstall (This was a new install the begin with), after running the integration wizard, and going to the queue properties, then to the ECC variables tab, and recieve a message that "CIM has detected ECC variables have been deleted from UCCE, and thus have been deleted from CIM".
Has anyone seen this before?

defiantely looks database issue, i wonder how the integration wizard ran without any issues.
since it has already ran once, i think you will not be able to run it once again and you have to tweak the config from system console.
to prove further, can you please zip the full log folder and share it here.
also please attach the DB config screenshot if possible.
for that you have to login to system partition and explore under,
system --> partition --> <whatever partition>-->database tab under properties.
screenshot is attached for the reference.
regards
Chintan

Cisco Operation Manager and Service Monitor on Separate Machine?

Similar Messages

Maybe you are looking for