Cisco optical specialist exam

I am planning to take the cisco optical exam and I will like to know about how many questions on this exam. Cisco web page has over 100 questions and i wonder if this is a typo. on the part of cisco or what? Thanks Barry

The following links will take you to a description of the SDH and SONET exams...
http://www.cisco.com/en/US/learning/le3/current_exams/642-321.html
http://www.cisco.com/en/US/learning/le3/current_exams/642-311.html
These pages should have enough info to answer your question (and more).

Similar Messages

  • I want to be a optical specialist SDH

    i cant get thing how to start reading and geathering material???

    For anyone with access to Cisco Learning Connection (any CCNA or above I believe), you can access a number of online courses for free following the links off of the Optical Specialist page. This will provide you some good insight into the basics of SONET/SDH and fiber optic communication.
    http://www.cisco.com/web/learning/le3/le2/le41/le82/le51/learning_certification_type_home_extra_level.html
    I recommend Cisco Press's Optical Network Design and Implementation book. It covers the basics of fiber optics as well as SONET/SDH, DWDM and provisioning on the 15454 as well.
    http://www.ciscopress.com/title/1587051052
    Also, http://www.cisco.com/en/US/products/hw/optical/ps2006/tsd_products_support_series_home.html includes lots of useful information on network setup, timing, design, etc, as well as links to all documentation for all software revisions.
    Hope this helps give you some direction,
    Josh

  • Cisco optical product advisor

    Is there any tool to calculate BOM (bill of material) for Cisco optical products?
    cheers

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    You can get Cisco TransportPlanner as a partner. You need to ask for it your Cisco representative (account group) and they’d be able request the tool for you.
    Note, this too is for 15454 (M2/M6/M15) MSTP platform.
    Regards,
    /A

  • How can i pass the cmrs-100-certified medical reimbursement specialist exam, ed.3 hitting up all the right answers?

    How can I prepare for the cmrs-100-certified medical reimbursement specialist exam, ed.3 hitting up all the right answers? because I do not want to fail this test.
    Sincerely,
    SonnyBoy

    How can I prepare for the cmrs-100-certified medical reimbursement specialist exam, ed.3 hitting up all the right answers? because I do not want to fail this test.
    Sincerely,
    SonnyBoy

  • Cisco wireless specialists certification

    Hi guys and girls
    last month I passed my CCDA and Cisco Lfecycle exam for wireless LAN.
    Now I should receive 2 certificates: CCDA and Cisco Advanced Wireless LAN implementation specialist.
    I received the CCDA certificate but no e-mail or certificate about Cisco Advanced Wireless LAN implementation specialist.
    When I look into my profile, I'm Cisco Advanced Wireless LAN implementation specialist.
    Why don't I receive any certificate?
    Do I need to submit a support case at the Certification Support Center?
    Tnx.

    You would need to open a case for this.
    Sent from Cisco Technical Support iPhone App

  • OPN Certified Specialist exam

    Hi ,
    I am a PL/SQL developer with over 6 years of experience.Currently I ma woking for a company who is an Oracle Gold Partner.
    I am plannining to take OCA  11G exam next month.When I request for sponsor ship for my exam to my company , they said  "Not sure how this is going to benefit the company at this moment. Something which would help the company like BI certifications can be looked at.".
    So I need to take my exam of my own. I searched for BI certifications provided by oracle.I got OPN and OCS.
    I feel OPN is best suitable for me as I am working for an oracle partner company.
    But I am confused  about they below FAQ provided in oracle site http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=353
    How is the OPN Certified Specialist designation different from the OCA, OCP, OCE or OCS certification?  
    The OPN Certified Specialist designation is layered on top of an OCA, OCP, OCE or OCS certification. So, any candidate can obtain the underlying OCA, OCP, OCE or OCS certification and individuals who are members of a partner organization will additionally receive the OPN Certified Specialist designation, provided they enter the correct OPN Company ID in the profile at www.pearsonvue.com/oracle.
    It means I dont need to take OCA /OCP if I take OPN certification?
    Also Please let me know whether I can go and take exam straight or any pre requisite  is there ( like OCA need to take before applying for OCP)
    Please clarify.

    ManjushaMuraleedas wrote:
    It means I dont need to take OCA /OCP if I take OPN certification?
    Also Please let me know whether I can go and take exam straight or any pre requisite  is there ( like OCA need to take before applying for OCP)
    Picking a test that I am more familiar with, anyone who passes the exam: 1Z0-528 -- Oracle Database 11g Security Essentials, would gain the following certification: Oracle Database 11g Security Certified Implementation Specialist. If the person is employed by an OPN company, then they would also become an OPN Certified Specialist and would help their company qualify for the Oracle Database Security Options specialization.  The certified specialist designation is just something that adds more meaning to OPN companies.
    Another example is the Database 11g Administrator Certified Professional certification.  Individuals who are 11G OCPs and work for an OPN company are also OPN Certified Specialists. Again, this helps the company's specialization status.  Don't ask me what the importance of a company's specialization status is... I have neither a clue nor any interest.
    So the answer is that OPN specializations are not done instead of OCA/OCP certifications but are something that sometimes come as an added bonus to getting an OCA/OCP.
    Most (again, perhaps all) of the OPN-specific exams are standalones and have no pre-requisites.

  • Oracle Linux 6 Certified Implementation Specialist  Exam 1Z1-460

    Reading though the syllabus for this exam, I can across the following:
    - Verify proper creation of vmcore by kdump using crash+D23
    Anybody know how to do this or is it some sort of typo?

    Looks like a typo to me, probably means crash utility.
    The deployment guide has further info, chapter 25: The kdump Crash Recovery Service
    https://linux.oracle.com/documentation/

  • Preparing for 642-311

    Hello all,
    I am preparing the exam with only now "Optical Network Design and Implementation by Vivek Alwayn, published by Cisco Press.
    I don't plan to take cisco course along with the exam, only through self study.
    Does any Cisco optical specialist provide me the information of useful paper materials, Links and practical software.
    Thanks
    [email protected]

    You can check this link for more infor:
    http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Networking%20Solutions&topic=Optical%20Networking&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd95930

  • Ask the Expert: Installation, Operation, and Troubleshooting of RF Gateway 1 (RFGW1)

    With Ron Hanson
    Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions from Cisco expert Ron Hanson about the RF Gateway 1 (RFGW1) including installation, operation, configuration, and troubleshooting.
    Ron Hanson is a customer support engineer in the Technical Assistance Center, where he supports major RF Gateway 1 customers as part of the Service Providers Video team. He started working with the RF Gateway before its general release in 2008, and worked in the field on large Gateway deployments before joining product support. Hanson has been in the cable TV industry for 38 years. He previously spent 22 years at Scientific-Atlanta, which was acquired by Cisco in 2007. He holds two joint patents and is certified as a Cisco Optical Specialist. 
    Remember to use the rating system to let Ron know if you have received an adequate response. 
    Ron might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Service Provider sub-community discussion forum shortly after the event. This event lasts through Sept 7, 2012. Visit this forum often to view responses to your questions and the questions of other community members.

    Hi John,
    Thanks for your reply.  The process of moving a license to another gateway can be done by the customer on the web site named HESULE  https://online.sciatl.com/license-it/.  You will need the HOST ID which can be found on the SYSTEM/License management tab. The HOST ID is essentially the 7 digit serial number with all leading zeros removed.
    Be sure to use Firefox when logging in.  Entering your email is important because the new license will be sent back to this address.
    In the License management tab, on the gateway you wish to remove the license from, record the 32 digit validation key number to the right of the license you wish to transfer.
    Go to HESULE and start the transfer process.  Hesule is very secure - therfore you must "prove" to Hesule the license has been removed from the first chassis.  Hesule will issue you a new license with the license you wish to transfer removed.  When you load this new license and new validation key will come up on the screen.  Go back to Hesule and enter this key to prove the license has been removed.  Hesule will then email you another new license containing the license you are transfering. Load this license on the new RFGW1 and the process is complete.
    Yes I understand I said a lot.  However, the process is described step by step on the Hesule site.
    If you have any problems do not hesitate to contact me.
    Thank you   RON HANSON

  • What is the prerequisite for cisco ips exam

    Hello everyone
    What is the prerequisite  for cisco ips exam?
    I read 640-553 is required. and for 640-553 is ccna prerequisite?.  i am not sure please guide me as i am new to cisco world

    You can take the Cisco IPS exam, however, you will only get the Cisco IPS Specialist certificate if you pass both CCNA Security and the Cisco IPS exam.
    Here is the URL for your reference:
    http://www.cisco.com/web/learning/le3/le2/le41/le85/le58/learning_certification_type_home_extra_level.html
    However, you can take the Cisco IPS exam first prior to taking the CCNA Security. The order of exam does not matter, and you will only get the Cisco IPS Specialist certificate once you pass both CCNA Security and Cisco IPS exam.
    Hope that helps.

  • Cisco Route Exam Expiring 642-902

    Hi Guys,
    I'm schedule to take the route exam early next year. But I receive an email from pearson that the exam is expiring. Please see email below. I'm a little bit confused , can someone clarify the details below..
    Dear Cisco Candidate,
    We are contacting you to inform you that Cisco is retiring exam 642-902 - Implementing Cisco IP Routing onJanuary 31, 2015. Our records indicate that you are currently scheduled for this exam after the retirement date. You will need to reschedule this exam either on or before January 31, 2015. If you are not able to reschedule this exam before the retirement date, you may cancel the exam and reschedule the replacement exam 300-101 (TShoot). 
    Please visit www.pearsonvue.com/cisco to reschedule/cancel your exam appointment.
    Thank you,

    yes it means Tshoot exam(with new code), it depends on you which u like to take first tshoot or route.
    Do I need to accomplish 3 exams for CCNP before January 31, 2015?
    you should ask this question to pearsonvue, they will answer you within 5 working days.
    The email you have received reply it as soon as possible.
    "Please rate and select correct answer, if post helpful"

  • About CCNA, CCNP & CCIE exams codes & expiration

    Hi,
    Pleas help me out, I am about to write the ccna 640.802 exam and what is the expiration periode between ccna to ccnp, ccnp 4 papers and ccie.
    And what are the latest ccna, ccnp and ccie exam codes.
    Please conforme me so that i can plan to write the exams.............
    I am looking for any one help.
    Thanks & Regards,
    Srinivas.

    In this page you could find all of the information about Cisco Certifications.
    http://www.cisco.com/web/learning/le3/learning_career_certifications_and_learning_paths_home.html
    Regarding the preparation time dependents of your experience and you goals.
    HTH
    Please rate this post if was helpful
    Walter Solano
    CCVP, Cisco UCCX Specialist
    Cisco IP Communications Express Specialist

  • Guidance for CCNP collabration exam

    I M CCNA voice certified and my expiry of certification will be on Month of Oct 15, I m preparing for CIPT 1 exam, today i got to know from cisco website about  CCNA collabration and CCNP collabration, can you please help me for collabration certificate track
    My queries listed below
    1) If I will complete my CIPT 1(642-447) paper then will it be my validity of certification extended for more 3 yrs ?
    2) If I will complete my CIPT 1(642-447) paper then will i be applicable for CCNP collabration with 3 yr validity.
    3) Or shall i go for CCNA collabration with  CIVND (200-060) paper
    please refer below tools from cisco website
     CCNP Collaboration Exam Migration Tool
     CCNA Collaboration Exam Migration Tool

    CCNA Voice certifications are valid for three years. To recertify, pass ONE of the following before the certification expiration date:
    Pass any current Associate-level exam except for ICND1 exam or
    Pass any current 642-XXX Professional-level or any 300-XXX Professional-level exam, or
    Pass any current 642-XXX Cisco Specialist exam (excluding Sales Specialist exams or MeetingPlace Specialist exams, Implementing Cisco TelePresence Installations (ITI) exams, Cisco Leading Virtual Classroom Instruction exams, or any 650 online exams), or
    Pass any current CCIE Written Exam, or
    Pass the current CCDE Written Exam OR current CCDE Practical Exam, or
    Pass the Cisco Certified Architect (CCAr) interview AND the CCAr board review to extend lower certifications
    When using a higher level of certification to extend other certifications, the expiration date of other certifications will extend to the expiration date of the higher certification (i.e.: If you have one year left on your CCNA Voice certification and you earn a CCIE certification (which has a two-year certification life) then both your CCIE certification and your CCNA Voice certification will expire two years from the date you achieved the CCIE certification).

  • Digital Optical Monitoring Transceiver SNMP monitoring C7206VXR NPE-G2

    Hello,
    We have C7206VXR NPE-G2 platform with transceiver which support DOM.
    Could we monitor DOM tx/rx level statistic through snmp for 7206 platform?
    In CLI result of command "sh interf GigabitEthernet0/1 transceiver" give some information.
    We tried search for some MIB In "MIB locator" on cisco.com.
    The MIB CISCO-ENTITY-SENSOR-MIB is supported for:
    Release: 12.2(33) SRE3
    Platform: 7200-NPE-G2
    Featur Set: SP Services
    But there is no result on SNMP for these OIDs.

    I believe the parameters you want should be available by using the CISCO-OPTICAL-MONITOR-MIB.

  • Scjp 1.5 exam details

    I am planing to take scjp 1.5 exam. Can someone tell me the details about the exam. How many questions will be there , what is the time allowed & what is the pass mark of the exam.
    Please let me know from where I can get any further details, example questions.
    Thank you...

    Interested in taking the Cisco [642-901 exam |http://www.pass-guaranteed.com/642-901.htm] our [642-901 practice exams |http://www.pass-guaranteed.com/642-901.htm] and study questions are composed by experts, who use their experience in preparing you for your future in Cisco.
    Pass-Guaranteed is the one of the best site for passing the Cisco exam.
    Pass-Guaranteed also offers you [642-642 test exam|http://www.pass-guaranteed.com/642-642.htm], [640-802 exam question|http://www.pass-guaranteed.com/640-802.htm], [640-816 practice exam|http://www.pass-guaranteed.com/640-816.htm], [642-812 dumps |http://www.pass-guaranteed.com/642-812.htm]

Maybe you are looking for