Cisco OS 2000.2.7 does not support MCS 7825I1 ?

Hi Pros,
I have a new installation coming up of CCM 4.1.3 & Unity 4.0.5
Seems Cisco has sent wrong set of OS Cds for CCM. The Server is a IBM make (MCS 7825I1) with Prescott 3.4 CPU & 2GB RAM alongwith 2 * SATA 80GB HDD.
When I insert Hardware Detection CD for 2000.2.7 it says "This OS version does not support the detected server. Remove the disk and press any key to reboot.
My BoM says:
CM4.1-K9-7825= SW CallMgr 4.1, MCS-7825 2
MCS-7825-I1-IPC1 HW Only MCS-7825-I1 with 2GB RAM
and SATA RAID
2
Can I install like this - Run IBM ServeRaid, Prep server, Insert Win2k cd, then after install run OS Upgrade 2000.2.7
Will this work?
Regards,
Pratik

i am not sure why the CPU speed should matter.......
I don't know what to say, if you have the "a" hardware detection disk, this should work. I have never had a problem once i had the right media so i will step aside and wait to see if someone else can help.
Steve

Similar Messages

Cisco DCNM 6.2 does not support most of the switches in my network

Hi All,
I have just installed Cisco DCNM 6.2. I have run a discovery using SNMP v1 my core switch which is a 3750G stack. DCNM discovers all my switches but does not support the 2960 and 3750 switches. The only switches I can select to manage and are supported are a 4510 and 3550. I have also run another discovery using SNMPv3 on a different core switch (Nexus 3K) at one of our remote sites. DCNM found all the other 2960s in that network but I can only select the two Nexus switches in the core to manage. What do I need to do to be able to manage all my switches switch?
Thank you in advance.

Hello,
DCNM is meant for data centre network management and as such only supports the MDS, Nexus and the 6500 series switches, see the RN under supported Cisco platforms and software:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/dcnm/release/notes/dcnm_6_2_5a_relnotes.html#pgfId-314209
For the discovery issue DCNM should 'see' the other devices so you need to have a look at your SNMP and CDP (used for neighbour discovery on a per hop basis) settings on each of the devices.
For an software package to manage LAN/WAN environments you really need to be looking at Cisco Prime LMS.
We are going through the same problem, it would be nice to be able to manage the DC and LAN from DCNM.
Regards
Daniel Hunter

TestStand Open SQL Statement does not support SQL's ORDER BY clause???

TestStand 1.0.3
Windows 2000 SP1
SQL Server 2000 Personal
You've got to be kidding me...
It appears that the built-in TestStand Open SQL Step does NOT support the
"ORDER BY" clause in the SELECT statement, even though the documentation
says it does. Is this true?
I have an Open SQL Statement query:
"SELECT * FROM [MyTable] WHERE ([Batch ID]=1234)"
it works fine, returning a correct record count 120 records. If I change
the Open SQL Statement query simply by adding an ORDER BY clause, such as:
"SELECT * FROM [MyTable] WHERE ([Batch ID]=1234) ORDER BY [MyField] ASC"
it returns a record count of zero. I know that "MyField" exists in the
MyTable table and contains valid data. The
second query works fine in SQL
Server Enterprise Manager.
Am I missing something? Is it true that the TestStand Open SQL Step does
NOT support the "ORDER BY" clause? If not, what &#$!ing good is it and why
does the manual state it is supported? Is there any other way using just
the TestStand steps to order a database recordset on one or more fields?
Any help would be appreciated.
Grrrrr....
Bob Rafuse
Etec Inc.

> Bob -
> The database step types do not do anything special to the SQL command
> that you give it. The step just passes the command to the ADO
> provider. I tried a simple query using the step types with the
> following command,
>
> "SELECT UUT_RESULT.* FROM UUT_RESULT WHERE ([UUT_SERIAL_NUMBER] =
> 12345) ORDER BY [EXECUTION_TIME] ASC"
>
> and this return the expected results and the record count parameter
> was as expected. I tried this on TS 1.0.2 and TS 2.0 with MS Access
> 2000 and MS SQL Server 7.0. I do not have MS SQL Server 2000 at this
> time.
>
> It would be surprised if the step types are messing something up.
I've been doing some experimenting over the past couple of days. Simple,
one-table queries seem to handle the ORDER BY clause fine. Th
ings seem to
get messed up when I try multi-table queries with ORDER BY clause with the
TestStand database steps. I get no errors but the returned record counts
are always 0 with the ORDER BY and positive without the ORDER BY. The exact
same queries work fine in Visual Basic/ADO and the SQL Server Query
Analyzer.
> Questions:
> 1. Have you verified whether the data is actually returned even though
> the record count is zero?
Hmmm... yes data IS getting returned (at least on the two instances I just
checked), but the record count is always zero. I was not proceeding with
processing if the record count was 0.
Still... I don't know how to loop through the recordset without knowing how
many records there are an not eventually generate an error by passing EOF.
Is there another way using the TestStand database steps to determine a) the
number of records in the recordset or b) when I'm at EOF?
> 2. Are you using any advanced options on the Opend SQL Statement step
> type, specifically
the cursor type set to forward only? Forward only
> cursors do not allow for record counts.
Everything on the Advanced tab of the Open SQL Statement step is set to "Use
Default".
Bob.

CS4 does not support XP 64....

I just read this from Curt:
"Premiere CS4 does not support XP64. It supports XP 32, Vista 32, or Vista 64 on PC"
Why not? and will it be supported in the future?
Will it work with Windows OS 7?

It works with xp64 but it's not supported. Vista 64 is what the program is optimized for. I have Windows 7 64 as test OS and it works perfect so far. Right now if I'm doing an After Effects project I'll do it in Win 7 64 because it is faster. Hands down.
I know there's a lot of hate for Vista but XP is going the way of Windows 2000. I know some people hate that but technology is what it is. I wouldn't be surprised if there is no support for xp when CS5 comes.
Actually I kinda wish 32 OS would die off so 64bit will become more widely supported.

TFTP, Protocol does not support listing directories

Hi everyone,
I am trying to install patch for PI 1.4 because of the browser problem. I have downloaded the patch.
I also have read the post https://supportforums.cisco.com/docs/DOC-26972#comment-22434 and followed the steps described.
I created repository and try to make the tftp server's root directory into the repository, as u can see in the picture below. Is it correct? Because when I want to display the file contain in the repository, the error message shown "Protocol does not support listing directories", what does it mean?
Thanks.

Here's another way:::
1) From your PC launch a CMD Prompt
2) CD to the directory where the patch is installed
3) ftp xxx.xxx.xxx.xxx (this is the IP address of the NCS/PI server)
4) login as ftp-user
5) enter the password created during the install of NCS/PI for the ftp user account (if you don’t know it, you can change it by entering
ncs password ftpuser ftp-user password
6) type bin then press return
7) type hash then press return
8) type put
9) login to the CLI of the NCS/PI server as an admin user
10) type dir disk:ftp and you’ll see the file stored in the /localdisk/ftp directory on the disk
11) if you don’t have a repo pointing to disk:ftp then create one using
     a) config t
     b) repository localftp
     c) url disk:/ftp
     d) exit
12) type ncs stop
13) type patch install localftp
Note: if a PC firewall is enabled, you may have to disable it in order to get the file transfer to work

JDBC-ODBC Bridge does not support Unicode UTF-16

Hi
I'm using Jdeveloper 10.0.3 IDE in order to develop an application for data transformation between MS Access 2003 (source) and Oracle 10g (destination). Clients use Windows XP.
JDBC-ODBC Bridge still does not support Unicode UTF-16 which is the Charest used by MS Access 2000/2003.
Note that when I changed locale in regional setting, destination Connection to Ora10g failed to open a connection, it works only with English locale, so I can't change my locale information.
How can I read Unicode from source DB?
Any help would be appreciated. I look forward to see your response.
Thanks,

i also heared that JDBC-ODBC Bridge still does not support Unicode UTF-16,
but i guess this is not in my case.That's the key in fact. JDBC-ODBC Bridge does not support UTF-16, which is the charset used by MS Access 2000/2003.
or do i need to use a third party driver for jdbc odbc bridge?Free library at http://jackcess.sourceforge.net/
Commerical JDBC driver at http://www.hxtt.com/access.html
Yonghong Zhao
System Analyst
www.hxtt.com

This image cannot be rendered for editing because Aperture does not support

Editing Error: This image cannot be rendered for editing because Aperture does not support the image format.
I have been having this issue when trying to open photos in CS4. It only seems to be affecting images from the last year or so, although I'm using the same cameras (Canon 7D, 5D, and S90) as before. My library is large, going back to year 2000, and all the older images seem to work fine, but most all of the recent files display this error when trying to open them is CS4. I've tried the methods described in other threads and on the support website, namely starting aperture while holding option and command, pulling up the options to rebuild the library in various ways. I've done all three options, the last two twice, with no change. This is very frustrating to not be able to use the program in the way I had planned... Any ideas? I'm wondering if my library is simply too large- although I'm not sure if breaking the library into smaller chunks is the best way to go. I prefer having all my photos together. I have found that iMovie fails to operate properly when events get too large. Is this a similar problem?

Again, thanks for the input. As for the first suggestion, when I import without renaming they all work, but as of late, all appear to work no problem. It seems like it was a block of time from roughly October 2009 through November 2010 where most all the files imported during this date demonstrate the problem. As for the second suggestion, I've tried both 8 and 16 bit TIFF and PSD file types selected in the editor preferences, with no luck.
My next move has been to relocate the offending files out of their current location to another location (they are referenced, not managed). In doing this, I encountered what seems to be a file access or privelege error message, although about 20% of the files were moved, and in doing so, it seems to have solved the problem for those. But I don't have a good way of isolating the involved images outside of Aperture, and I don't want to move them with Finder anyways since that would ruin the referencing.
This bug is getting so complicated I'm ready to throw my hands in the air and just go back to Lightroom. Aperture has so much potential, especially in regards to integration with ipods, iPads, other Macs, etc. but in the 4 months I've been using it, I have spent WAY more time addressing buggy issues like this one than the amount of time supposedly saved using Aperture instead of Lightroom.

3905 SIP phone does not support extension mobility?

Does any one can confirm if 3905 SIP phone support extension mobility? I subscribed "extension mobility" service under phone, but I can not see it after I press "application" button on the phone. But I can not find any document says 3905 does not support it. Anyone can confirm that?
Thank you.

Hello,
3905 phones do not support Extension Mobility, check out the phones comparison below:
https://supportforums.cisco.com/sites/default/files/legacy/1/5/5/15362551-ip_phone_comparison_matrix.pdf
Thank you,
Shadi

K8T Neo - Core Center does not support your motherboard!

I installed the latest version of Core Center utility on Windows XP x64. But if I attempt to run it "Core Center does not support your motherboard!" is displayed. The download website clearly states that Windows XP x64 is supported. The message does not mention Windows XP x64 but the problem appears to have something to do with it because there is no problem on Windows XP x86.
Any suggestion is appreciated.

Quote from: Kaz Honjo on 02-September-07, 21:33:39
I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly.
"I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
Support list :
   MS-6570E,MS-6580(v5.0),MS-6585(v5.0),MS-6590(v2.0),
   MS-6702(v1.0,v2.0),MS-6702E,MS-6714(v5.0),MS-6728(v1.0,v2.0,v3.0),MS-6741,MS-6758(v1.0,v2.0),MS-6788(v1.0,v2.0),MS-6799,
MS-7003,MS-7008,MS-7021,MS-7025,MS-7028(v1.0,v2.0),MS-7030,MS-7031,MS-7032,MS-7033,MS-7037,MS-7043,MS-7047,MS-7052,MS-7053,MS-7058,MS-7066,MS-7088,
   MS-7100,MS-7125(v1.0,v3.0,v3.A),MS-7133,MS-7135,MS-7143(v2X),MS-7151,MS-7157,MS-7158,MS-7160,MS-7166,MS-7175,MS-7176(v1.0,v2.0),MS-7185,MS-7194
   MS-7203,MS-7220,MS-7226,MS-7235(v1.1),MS-7236(v1.0,v2.1,v2.2,v2.4),MS-7246,MS-7250(v1.0,v2.0),MS-7260,MS-7267(v2.1,v3.0,v3.1,v3.2),MS-7279(v1.0,v2.3),MS-7280
OS : Windows 98/Me/2000/XP32/XP64
Basically should work...
"I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly."
go to "Control", "Automatic Profile" and select the right senzor to be used.

SL500 " this program does not support this system"

I've an SL500 with windows 7 64bit system. It has a fresh system installed. I've installed all the necessary drivers correctly.Now I'm not able to install the followind items with system update utility:
Thinkpad ultranav driver for windows 7
Thinkpad hotkey features integration driver
Thinkpad Ultranav utility
If I try to install manually I receive an error message " this program does not support this system".
Solved!
Go to Solution.

I had the same problem with Thinkpad hotkey features integration driver Version 3.84.1500
(and the latest version 3.84.2000)
It is a faulty installation!
2 Files missing.
Solution until Lenovo fixes the installation:
Download and extract latest version.
Download and extract version 3.81.0100.
Copy the files SWI32.sys and SWIX64.sys from version 3.81.0100 to the corresponding folder of the latest version.
Start setup.exe of latest version.
According to the file properties SWI32.sys and SWIX64.sys are used as 'System Information Detector'.
No wonder we get the error message 'this program does not support this system'
Lenovo, please fix it.

Does the later 2009 MacBook support the Apple DVI to Video Adapter (s-video). I want to connect it to an old tv which does not support HDMI. Any suggestions?

I have a late 2009 MacBook which I want to connect to an old LG tv. The tv does not support HDMI it only has the (red, while, and yellow) ports. Sorry I dunno the exact name for it.
So I was thinking of using the Apple Mini DVI to Video Adapter (s-video), link below...
http://store.apple.com/Catalog/dk/Images/M9319_screen.jpg
But I'm afraid that the MacBook might not support the adapter.
Can anyone give me a solution for this? Is there an alternative way of doing this? I'm kinda new to apple display adapters.

The Late 2009 model 6,1 has a Mini DisplayPort not the Mini-DVI. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When the System Profiler comes up check the Model Identifier.
Composite is the name for the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs. If you want to use the Composite input on your TV there’s no Mini DisplayPort to Composite. You’ll have to get a Mini DisplayPort to VGA adapter http://www.amazon.com/s/ref=nb_sb_ss_i_1_19?url=search-alias%3Delectronics&field -keywords=mini+displayport+to+vga&sprefix=mini+Displayport+to and a VGA Adapter to TV S-Video RCA Out Cable for PC Video. http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
Only the Yellow plug or the S-Video plug for video will work. For sound you'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

IE11/Win 8.1 error 'Your client does not support opening this list in windows explorer'

I hoping someone might be able to help with this frustrating issue.
I work on a project where we are using various versions of on-line SharePoint (2007/O365). In order to quickly drag and drop folders we need to often open the document libraries by using the 'open in windows explorer view'.
Using the same device, on occassion this works. But often it gives a rather unhelpful message 'Your client does not support opening this list in Windows Explorer'.
I've searched for this issue over the net and confirm that the sites are added to the 'trusted' sites area and that the 'remember you credientials' is checked on logging in.However, the searches do not seem to apply to IE11/Win8.1 or on-line version of sharepoint
(the suggested hot fix is not suitable)
Only this morning, using the same device I was able, for a short while to open in explorer view, and then for no apparent reason, it began to display the error message. I had changed nothing regarding settings or even closed the browser.
Do you have any support/ideas/fixes on how to resolve this.
Many thanks
val

Hi Val,
sometimes an answer can be found on the internet by typing the error message from your computer into your favourite search engine.
eg.
http://www.bing.com/search?q=your+client+does+not+support+opening+this+list+in+windows+explorer&form=IE10TR&src=IE10TR&pc=HPNTDFJS
see
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
follow the directions given above.... you need to add the domains to your Intranet sites list, not the Trusted sites list.
Perhaps you already have it mapped to your intranet zone....in which case make sure that you have unchecked "Enable Enhance Protected Mode" on the Intranet zone dialog in Internet Options.
If this is happening 'randomly' on client machines, then users are probably changing their internet security settings in Internet Options. Ensure they are accepting the default.... Internet Options>Security tab, click "Reset all zones to default".
Consult with your system administrators to find out if they are applying a custom security template for the Intranet zone... It may be removing the sharepoint domains from the client Intranet zone's domains lists.
HTH.
Rob^_^

AS I FOUND OUT LATE, LION DOES NOT SUPPORT ROSETTA, WHICH SUPPORTS QUICKEN AND CLASSIC AOL, AND MANY OTHER APPS. CAN I TAKE LION AWAY AND GO BACK TO SNOW LEOPARD?

I found out after the install of LION, that it does not support Rosetta, which runs Quicken and the classic AOL software and a myriad of other apps.
Can I go back to Snow Leopard? Is there a way to retrieve my thousands of saved E mails, which are saved on my Mac?
I still see the filing cabinet with my screen name but cannot get them to open.
Please help! Lion may roar, but the fact it does not support apps like quicken means it purrs.

I had the Apple store wiped out my hard drive and I restore my last hard drive downloard by first placing Snow leopard DVD in the DVD drive and holding "C" when turning on the machine then I follow the instructions. I am back on snow leopard and trying out two finance software to replace Quicken for mac 2007. I am trialing Quicken essentials and ibank. They are both compatable with LION. So when I am ready will download Lion again. Also, Micorsoft Office needs to be 2011 version for it to work on Lion

I am told that my browser does not support iframes when trying to access a web site.

This is Google's cache of http://sitetrail.com/askearth.com. It is a snapshot of the page as it appeared on Sep 19, 2010 10:44:02 GMT. The current page could have changed in the meantime. Learn more
Full version These search terms are highlighted: history askearth com
* Contact Us
SiteTrail - Website News and Analysis
* Business
* Dev & Design
* Entertainment
* Mobile
* Social Media
* Tech
Search in SiteTrail askearth.com (visit site) This data was last updated 6 months ago (update data).
Site Profile Estimated Value: $5,582.16 USD Estimated Revenue: $7.60 USD per day $227.90 USD per month $2,772.81 USD per year Estimated Pageviews: 3,355 per day 100,648 per month 1,224,551 per year Alexa Rank: #447,581 Google Index: show google links Yahoo Index: show yahoo links Bing Index: show bing links History: show history Site Title: Interesting Questions - AskEarth Site Traffic
Site Server Server IP Address: 140.174.79.37 Server IP Decimal: -1934733531 Server IP Location: Pordenone, Friuli-Venezia Giulia, Italy
Your browser does not support iframes. Whois Information Welcome to the Network Solutions(R) Registrar WHOIS Server.
The IP address from which you have visited the Network Solutions Registrar WHOIS database is contained within a list of IP addresses that may have failed to abide by Network Solutions' WHOIS policy. Failure to abide by this policy can adversely impact our systems and servers, preventing the processing of other WHOIS requests.
To see the Network Solutions WHOIS Policy, click on or copy and paste the following URL into your browser:
http://www.networksolutions.com/whois/index.jhtml
If you feel that you have received this message in error, please email us using the online form at http://www.networksolutions.com/help/email.jsp with the following information:
Whois Query: askearth.com YOUR IP address is 174.129.155.56 Date and Time of Query: Tue Feb 23 00:49:37 EST 2010 Reason Code: IE DNS Records Host Class Type IP TTL Target Other askearth.com IN A 140.174.79.37 7199 askearth.com IN NS 7200 ns53.worldnic.com askearth.com IN NS 7200 ns54.worldnic.com askearth.com IN SOA 7200 mname: NS53.WORLDNIC.com rname: namehost.WORLDNIC.com serial: 108121504 refresh: 10800 retry: 3600 expire: 604800 minimum-ttl: 3600 HTTP Headers HTTP/1.1 302 Found Date: Tue, 23 Feb 2010 05:59:34 GMT Server: Apache/2.2.11 (Unix) mod_fastcgi/2.4.2 PHP/4.4.9 with Suhosin-Patch mod_ssl/2.2.11 OpenSSL/0.9.7m mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8.7 Location: http://askearth.com/go/home Content-Length: 417 Connection: close Content-Type: text/html; charset=iso-8859-1
HTTP/1.1 200 OK Date: Tue, 23 Feb 2010 05:59:35 GMT Server: Apache/2.2.11 (Unix) mod_fastcgi/2.4.2 PHP/4.4.9 with Suhosin-Patch mod_ssl/2.2.11 OpenSSL/0.9.7m mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8.7 Set-Cookie: id=11010246; EXPIRES=Sun, 01-Apr-29 00:00:00 GMT; PATH=/ Set-Cookie: pass=u0zit0yv; EXPIRES=Sun, 01-Apr-29 00:00:00 GMT; PATH=/ Set-Cookie: since=1266904775; PATH=/ Connection: close Content-Type: text/html Firefox Add-on SiteTrail Firefox Add-onPerform SiteTrail lookups via right-click menu straight from your web browser! Popular Lookups
* google.com#1
* facebook.com#2
* youtube.com#3
* yahoo.com#4
* live.com#5
* baidu.com#6
* wikipedia.org#7
* blogspot.com#8
* msn.com#9
Browse Lookups
A B C D E F G H I
J K L M N O P Q R S T U V W X Y Z Recent Lookups
* askearth.com#447,581
* evdenevenakliyatv.com#442,990
* mytaskhelper.com#756,476
* fikralari.net#639,299
* typemytape.com#1,547,530
* tmmod.info#1,078,434
* torrentplus.org#233,938
* communitycollegelistin...#430,008
* cadbury.co.uk#104,852
* myhobbyblogs.com#297,443
Random Lookups
* solidmastermind.com#931,183
* homelegance.com#277,584
* homepage-anleitung.de#1,091,134
* icicigroupcompanies.co...#1,513,887
* ptiboo.ch#744,058
* fachportal-paedagogik....#312,102
* lcpo.com#336,926
* spitinet.gr#904,561
* sportingpulse.com#37,069
* v-pillsbuyutucuhap.com#543,342
* sameskyboard.com#51,252
* alparslanpazarlama.com...#1,444,281
* ventausa.com#221,470
* dentalmag.org#234,937
* digitalfoci.com#1,214,872
* blank-label.com#273,247
* efun.ir#446,350
* greatamericandays.com#579,258
* it007.com#58,123
* hairyclipz.com#760,892
Navigation
* Contact Us
Categories
* Business
* Dev & Design
* Entertainment
* Mobile
* Social Media
* Tech
Recent News
* VP of Twitter Says Twitter is NOT A Social Network
* Google Puts White Spaces To Use
* YouTube Instant Experiment Gives Creator a Job At YouTube
* YouTube Time Machine – A New Website To Waste Hours On
* Google’s New Instant Search – Saving 11 Hours Every Second
* Facebook Notes Gets New Tools
Recent Lookups
* askearth.com#447,581
* evdennakliyateve.com#442,990
* mytaskhelper.com#756,476
* maximumwoman.com#639,299
* typemytape.com#1,547,530
* tmmod.info#1,078,434
© 2010 SiteTrail. All Rights Reserved.

I'm not clear on where you are seeing that text. When I view Google's cached page from the page found in this search
https://www.google.com/search?q=site%3Asitetrail.com%2Faskearth.com
It doesn't match yours exactly. There is an iframe with a Google map in it in the "Hosting Analysis" section, which in your pasted page seems to be the "Site Server" section.
Which Google site did you search?

Adobe Creative Cloud does not support Bootcamp by Apple IOS operating system, but does work with boot camp Win 8.1 why"

Adobe Creative Cloud does not support APPLE latest IOS operating system, but does allow Windows 8.1 to be accepted. This seems a shame to me, as
Apple IOS is the leader in graphics, photography. The advertising states it is usable under both APPLE IOS and Microsoft 8.1 windows operating systems. Adobe Support Chat Sooraj tells me on 02/19/2015 that i must buy two computers to have it operate on both operating systems. Adobe will not support apple's Boot CAMP allowing both operating systems.
i love the apple product and love the ADOBE Photoshop CC, but it simply does now work with an apple keyboard and a WiN operating system. .[email protected] Adobe Creative Cloud

In Thehatters defence, this was initially posted in the MacbookPro forum and then moved to Boot Camp,
If you have any joy solving your trackpad device driver issue, feel free to post here (there might be a similar fix for my wireless adapter device)
Thanks

Cisco OS 2000.2.7 does not support MCS 7825I1 ?

Similar Messages

Maybe you are looking for