Cisco PCA contacts not importing all of them

Trying to get contacts imported into Cisco PCA (Cisco Unity Personal Communications Assistant) so we have certain users call by voice command...
I am able to get most of the contacts in, but only about 50% will import from Exchange. I cannot figure out why others are not importing. I cannot find anything obvious different between the contacts.

So after much back and forth with TAC and getting the right people involved, there's a hard limit of 150 on Cisco's side. We are putting in a PER with our partner, but I'm guessing this is a "don't hold your breath" situation Its too bad this isn't documented anywhere and wasted a lot of my time and their time.

Similar Messages

How can I set up my contacts so that I do not see all of them on ipad from iCloud?

How can I set up my contacts so that I do not see all of them on ipad from iCloud? I don't need/want to view contact info for casual contacts on the ipad. (I.e. contacts entered so that I can identify a caller for ID/screening purposes)
Also would like to limit email contacts from yahoo- no need to view emails for every "safe list" address.
Thanks!

Keyboard shortcut for FullScreen is command + control + F
For more on this:
http://support.apple.com/kb/PH11941

HT4489 Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

1 - Select the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option. This will take you to the folder containing the original file with that file selected by the Finder.
You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also. Made sure what is found is the large, original version and note were it's located. Search all of your drives with FAF just in case.
If you don't fine the full sized version then the only recourse is to use a file recovery application like SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered. If you find enough files to make the purchase of the software worthwhile buy it and recover the files. However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
2 - book projects are just entries in the library databases and can't be exported to another library.

Iphoto does not import all items from camera

I have been importing photos into Iphoto from my canon SD300. I have noticed that on occaissions it has skipped a few files while importing. In particular it has skipped movie clips. When the camera is connected Iphoto says it is ready to import and tells you the number of images and movie clips, and it recognizes all of them. However, once the import function is over on the last occaision I noticed that two clips and one image was not imported. I manage to get the missed image/clips by inserting the memeroy card in a card reader and dragging the missed image/movie clips into Iphoto.
I would appreciate if any one knows why Iphoto does not import all the items from the camera even though it recognizes that they exist and how I should fix this problem.
Thanks.

Hi imac2,
I don't know why iPhoto skips some of your files. I can tell you that I use Image Capture to download my images and video clips. My video clips from my Canon can get quite large (over 1010 mg). iPhoto can import smaller clips that digital camera made, but now a lot of the newer camera can create very large video clips and I don't think iPhoto can handle importing them.
Once I download my images and video clips I put them in dated folders. This makes it much easier to back up the video clips and images. I then import the folders of images into iPhoto. I like having more control.
Lori

New photo app does not import all of my photos from iphoto library

I have just installed 10.10.3 on my Macbook and the new photo app does not import all of my photos from iphoto library. I have about 3200 photos in the library and only 2300 are presented for import. I only have 1 library so I didn't choose the wrong one. Any suggestions?

Upon closer inspection it appears that the missing photos are in a folder called IPhoto Library. This folder is greyed out when I choose the import folder.
When I use 'show package contents' it reveals the missing photos (below). Why is my iphoto library so scrambled! Thanks for any insight.

Aperture 3.2.1 not importing all photos from card reader

Aperture is not importing all photos from the card reader, i tried importing 720 photos and it was only seeing 480 photos, the card reader stopped reading, aperture was saying "loading assets", still, like if it was still reading the card. and the first time it loaded the pictures the import button was not availllable once not all the photos were not all loaded when the loading assets message stopped.
i had to force quit aperture, ejecting the card from the reader, aperture, on relaunch was still seeing the card as present but it was ejected from the finder , and physicaly on the desk.
i had to go in Apple Acticity monitor to find a process that was still active , someting called mass media and had to stop it.
my work around was manually copying the content of the card on the external hard drive about 9 gig of photos on the external HDD where i keep my aperture photos. copying 9 gig of photos over usb2 took an 50 minutes.
i had jpegs raw and some videos in 720p
i have a MBP 2.26 ghz 13"
a Canon 7D and a Lexar 16 gig compact flash card.

Macuser72 wrote:
Aperture is not importing all photos from the card reader, i tried importing 720 photos and it was only seeing 480 photos, the card reader stopped reading, aperture was saying "loading assets", still, like if it was still reading the card. and the first time it loaded the pictures the import button was not availllable once not all the photos were not all loaded when the loading assets message stopped.
I'm sorry, but I can't understand this paragraph. It seems like the "loading assets" message stopped but not all the photos were showing up in the import window. Were any of the photos duplicates? How long did you wait until you forced quit?
When you say "the first time it loadedthe pictures" you mean you attempted before and got the same result?
It does seem like it is either getting stuck on an image or is taking a long time to read the images off the card since the import button is not available...
When you copied the files to your external drive, you were then able to import to Aperture?
Thanks

ITunes does not import all artists/songs from folder

I have had several issues with getting itunes to import all the music I have. I have selected the folder that I want itunes to be associated with. But when I go into itunes not all the artists imported. However, if I select add a folder, and then the artist, it imports the artist. I have tried to add the whole folder again, but still does not import all the artist/songs. At first I didn't think that I had imported the CDto the folder, but then when I went into my music folder it was there.
A couple of times when I have opened iTunes it was like starting over. I lost my playlists. I am not as concerned in getting those back as long as I won't lose all the changes I am now making. We also own two iPod shuffles, don't know if that makes a difference.
Thanks inadvance for any information!

I had a similar problem with a Jimmy Buffett album,I sent the iTunes store an e-mail described the problem including the album title and receipt number and within 24 hours they responded and had done a "reset" and problem solved.
Give it a try

Firefox will not import all of the favorites from Internet Explorer 11 in Windows 8.1 64-bit OS!

There is another post about this problem in the forum, but the answer does not work. This is the first time I've ever encountered this problem when installing/using Firefox on my desktop PC. I have a new (3/25/14) Dell XPS 8700 desktop tower with Windows 8.1 64-bit (and now Update 1) installed, along with Internet Explorer 11. I previously had a 2005 Dell Dimension 5100 desktop tower running XP Pro SP3 32-bit, which never had any issues running Firefox, but has since died. I used to run Firefox as my default browser, but not any longer. Now, during the install process, Firefox asks if you want to import from Internet Explorer, as it has always done before. I chose yes, and it reported that it pulled everything in from IE. However, it only imported my favorites folders whose names start with a numeral, and then A, B, and onward down the alphabet, but it doesn't import anything more after getting to the folders whose names start with E. So, all of my remaining Favorites folders whose names start with F, G, and forward down the alphabet from there are all absent from Firefox's Bookmarks. I also tried importing the favorites after installing Firefox, which I don't prefer since Firefox installs a folder called Internet Explorer to go to first to get to your favorites. However, still, Firefox only brought in my favorites folders from A to E, and stopped there again. I do not see any way to export my favorites from Internet Explorer (there is no import/export option under favorites, nor anywhere else in IE 11). Uninstalling and reinstalling Firefox resulted in the same problem, even after making sure to delete my settings, etc., in the process. Please update Firefox's installation executable so it's able to import ALL of Internet Explorer 11's favorites folders and their contents, complete, as it has always done before. Please contact me when the corrected executable to install Firefox properly is ready for download. Thank you.

If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks

IPTC legacy Contact - not imported by 3.4.1

Last year I tried out Aperture and found that it was able to see the 'IPTC legacy Contact' field. This is important for me, as it corresponds to the field "People" in the wonderful iView programme that I've been using for ever. It lists the people on my images. Recently when I upgraded to Mountain Lion, this old program stopped working however. And so I decided to buy a fresh Aperture, and import my pictures.
However: the new version of Aperture does not import the IPTC legacy Contact anymore!
This XMP:People field is equal to the IPTC:Contact (legacy) field, and in iView it is used to list the people on the image.
I've checked the jpeg file using exiftool to see if Aperture can write fields using 'Metadata'->'Write IPTC Metadata to original', or do the inverse with 'Metadata'->'Update from Original'. The result is:
-- Aperture can write the IPTC legacy Contact field
-- Aperture does not input the IPTC legacy Contact field
That means that the new Aperture 3.4.1 version cannot do what the older version did half a year ago??
Something else I notice, is that when I fill in the name of a face, this name is added as one of the IPTC Keywords.
.. so should I try to copy my "XMP:People" = "IPTC:Contact" (the two are equal) to the Keywords?
Is this is a known bug, where can I see a list of other known bugs in metadata handling?
How soon it will be fixed? And will I then be able re-read my metadata from the original files?
Another question: in iView, I was used to being able to merge the metadata that I had entered with the fields in the file, where either information in the file or in iView would 'win' in the merger. How should I do such an operation in Aperture?

Same here. I checked on my iMac and an MBP in Aperture 3.4.1, MacOS X 10,8.2, and I see the same. Aperture exports the legacy contacts field, but it does not show it in the versions when importing an image.
However, when I check the imported original/master image file, the IPTC field is not erased - the version just does not reflect the data stored in the legacy contacts field.
Something else I notice, is that when I fill in the name of a face, this name is added as one of the IPTC Keywords.
.. so should I try to copy my "XMP:People" = "IPTC:Contact" (the two are equal) to the Keywords?
Keywords? or do you mean IPTC tags? The keywords are a special kind of metadata tags, and I do not see the "faces" names in the Aperture keywords. In which tag do you see them?
if you want to use another IPTC field to store the Contact info, I'd recommend to copy your info to one of the metadata fieldds, that are not marked as "legacy". Any feature labelled "legacy" is likely not to be supported in the near future.
Is this is a known bug, where can I see a list of other known bugs in metadata handling?
I have not seen this bug reported before, and do not know of any list of known bugs.
How soon it will be fixed? And will I then be able re-read my metadata from the original files?
Write a bug-report to Apple: http://www.apple.com/feedback/aperture.html
They should be told, that users still depend on this legacy tag, otherwise the chances are slim that they will bother to fix it - the name "legacy" clearly indicates that this metadata tag is doomed and only supported for compatibility reasons.
Your imported originals/masters still have this field and carry the data - at least mine do - so you might consider to write an Automator service to access them with a shell script using exiftool.
But it might be easier in the long run to simply copy these data to a different tag that is still supported.
in iView, I was used to being able to merge the metadata that I had entered with the fields in the file
Aperture keeps the data you enter in the versions. Also, when you import an image file, the tags should be copied to the version. When you edit the tags and want to add these changes to the original file, you can use the command "Metadata > Write IPTC Metadata to Original". That will write your changes to the original file, but not merge the data.
Just some thoughts - sorry that I do not have a solution for your problem
Regards
Léonie

Does not import all JPG photos from local folders

Hi,
Using Lightroom 5.3 under Windows 7.
Photos are located on local disk.
I received a selection of photos from our research project which I want to import.
Most of the photos have been imported correctly.
However, import of some 500 photos fails.
"synchronize folder" detects the new photos (501)
"synchronize" command reports that "no photos or videos were found to import"
Windows security settings on the files are all the same (inherit from parent folder).
Disk has enough empty space left (56 GB)
The photos are in Jpeg format, typically around 500 to 2000 kB each.
Produced from Photoshop CS5, up to 3267x2244 pixels at 300 dpi.
Photos open correct in other viewers.
Are the any limitations to
- folder and file name length?
- spaces in file names?
Thanks in advance,
Roger.

JPGs will not import for one of the following reasons
you have shot JPG+RAW on your camera and the Lightroom option is set only to recognize the RAWs but not the JPGs from the pair
the JPGs have previously been imported into Lightroom, and so Synchronize or Import will not import them a second time (nor is there a good reason to import them a second time).

Ipad contacts not displaying all fields from mac address book, ipad contacts not displaying all fields from mac address book

After syncing mac address book to ipad contacts, the ipad does not display all the fields that were in Mac address book (in my case all the email addresses). Anyone have a fix?

I have a problem similar to DeeRun's.. I would like the IM fields to be synced.. I use them to send e-mails to when the e-mail field is empty or when i just want to use that specific address.. Very annoying, would take hours if not days to transfer all those IM adresses to e-mail fields in addressbook..
EDIT: not to mention the mess it would make in my address book!
Message was edited by: 1NStanley

Photos did not import all my iPhoto images

I have an iPhotos Library containing over 33,000 photos. When I attempted to import them into the new Photos app only 22,000 came across. I tried to open the old library again with iPhoto using the library in the same folder (Pictures) but the same photos were missing. Photos had obviously done something ,to not only fail to import all my images into the new library but had also removed them from my existing iPhoto Library as well. I suspect that there is a problem with Photos creating a large SQL database. I have repeated this a second time but with the same result.
The only work around I can find is to delete both the iPhoto and Photos libraries from the folder and recover yesterday's iPhoto library backup from Time Machine. Now when I go back to iPhoto all my photos are there again. This means that I have to keep using iPhotos and not continue with Photos until this problem is fixed.
Does anyone else have an answer?

Try repairing the iPhoto Library and see if that comes over correctly.
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Aperture does not import all files in folder.

I have a folder with 3460 images. They are a combination of NEF, TIF, and PSD and xmp files.
When it was finished importing it said it had imported the 3460 images; however, there are only 3278 images showing.
I tried starting a new library, and importing the same folder again. Again, I got 3278 images.
If I use the Finder and go to the folder, it shows 3496 files; however, 36 of those are .xmp files.
Any idea how I can check to see which files are not importing? Or what I can do to get these 182 files in Aperture?
Many thanks for any help.

Could be just chasing a ghost, but at least we'll know we don't have to capture it. Let's do two things to determine how many Images Aperture thinks are in the Library.
1.)
Select the container "Photos" listed near the top of the Library Inspector.
Clear the filter. (In Browser view, click the magnifying glass icon _inside_ the search field, and select "Show all" from the dropdown menu.)
Deselect all. ("Edit ▹ Deselect All".)
Expand all Stacks. ("Stacks ▹ Open all Stacks".)
What does Aperture report in the bottom border of the Browser? Should be something like "1234 items displayed".
2.)
Close Aperture.
"{option}+{click}" the Aperture Dock icon. (Hold {option} down until the dialog shows up.)
Select your Library from the list.
What does Aperture report below the list of Libraries (you may have only one Library in the list)? Should be something like "1234 versions, 1234 originals".
—Kirby

Primary Contacts Not Importing HELP!

I have tried for years to get my Primary Contacts to import with my Accounts. The Business Contacts and Accounts import separately but there is not a single Account that is showing a Primary Contact. I have thousands of Accounts and Contacts and it would
take forever to do it manually. Is there a way for me to import the Primary Contact names to my Accounts?

I have tried for years to get my Primary Contacts to import with my Accounts. The Business Contacts and Accounts import separately but there is not a single Account that is showing a Primary Contact. I have thousands of Accounts and Contacts and it would
take forever to do it manually. Is there a way for me to import the Primary Contact names to my Accounts?
Far too much missing information.
1) Outlook version being used?
2) How many email accounts (along with the applicable account "types" as in POP, Imap, etc) are configured in your Outlook profile?
3) What exactly do you mean by "tried for years...............to import with my Accounts"? Import from where?
4) Please clarify what you mean by "thousands of Accounts and Contacts" - specifically - the difference between an Account and a Contact as used in your description?
Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com

Lightroom not importing all images

I have a folder of 900 small jpegs in a folder on desktop.
Lightroom is only importing 898 of them. I don't have the energy to decipher what 2 are not getting imported. any idea out there? thanks.

How many images do you see in the Import dialog? Any duplicates? Are there any JPEGs which might be imported along with the Raw?
Beat Gossweiler
Switzerland

Cisco PCA contacts not importing all of them

Similar Messages

Maybe you are looking for