Cisco Phone VPN

Probably a stupid question, but if you connfigure a Cisco VoIP phone for SSL VPN, does it provide VPN connectivity to the switch port on the back of the phone?
Would a laptop connected to it get corporate access?

Hi GTG,
What you are facing is really weired. Please go through the following doc and see if your phone is configured properly:-
https://supportforums.cisco.com/docs/DOC-9124
Please keep us posted.
Regards,
Sian

Similar Messages

  • Cisco phone proxy will support on cucm 8.6 or not

    Hi as per document i can see that Cisco phone proxy . Without using vpn connect . Customer want to keep configured Cucm on there Jabber or cisco mobile on the iphone and need to get connected when ever they have an internet access .
    And also by keeping a small end router at branches havin only one cisco phone needs to connect to the corprate office using proxy.
    Is that possible and also is it possible on 8.6 cucm version . Here am just attaching a document info which says version supported
    Supported Cisco UCM and IP Phones for the Phone Proxy
    Cisco Unified Communications Manager
    The following release of the Cisco Unified Communications Manager are supported with the phone proxy:
    •Cisco Unified CallManager Version 4.x
    •Cisco Unified CallManager Version 5.0
    •Cisco Unified CallManager Version 5.1
    •Cisco Unified Communications Manager 6.1
    •Cisco Unified Communications Manager 7.0

    I understand the VPN solution is a good one, but we have already 100 proxy phones deployed and from what I read I'd need to first set up a VPN phone on the cluster before deploying it in the field. This would be difficult to do with users all over the country. Or am I missing something?
    I have a question about our ASA though if anyone can answer it. We have to move from an ASA 5510 to a 5520 due to the 100 UC proxy-phone license limitation (even though we have 70 phones it appears that a UC license is taken up for each TFTP server configured on the phone - primary and secondary). When I configured the 5520 I can register new phones no problem. None of the existing phones will register until the CTL file is manually deleted on each phone. Is there a way to seamlessly migrate to the 5520? Such as using the same certs, CTL file etc.. on the 5520? When I configured it it generated it's own self-signed key and CTL file. I did import the certificates from CUCM...

  • Cisco Phone Control and Presence 8.6.1.1185 with IBM Lotus Notes 8.5.2 (Integrated Sametime Client 8.0.2) - No presence status visible

    Hi community,
    I am trying to integrate Cisco Unified Presence 8.6.1.10000-34 with IBM Lotus Notes 8.5.2 with the integrated Sametime Client version 8.0.2 via the Cisco Plugins 8.6.1.1185.
    Phone control is working fine, whereas the presence status is not shown (= no handset symbol next to the Sametime user). When I look in the preferences of the plugin, I can see that the plugin has connected successfully to the CUCM (8.6.2.20000-2),whereas the connection to the CUPS has not been established.
    The user id as well as the password are all the same on all systems. Here is a description of what I have configured via the ciscocfg.exe tool:
    Feature Control:
    - Enable Phone Status -> checked
    - Enable Dial Using Cisco IP Communicator -> unchecked (not required)
    - Enable Control Desk Phone -> checked
    - Default Mode -> Control Desk Phone
    Control Desk Phone Settings:
    - Voicemail Pilot Number -> left blank (no voicemail)
    - Cisco Unified Communications Manager
         - Servers -> IP address of CUCM
         - Read Only -> unchecked
         - Use as Default CUCM -> checked
         - Synchronize Credentials -> checked
              - Use Sametime Credentials -> checked
    Use Secure Connection: -> not required
    LDAP Phone Attributes: -> not required
    Phone Status Settings:
    - Cisco Unified Presence Servers -> IP address of CUPS
    - Read Only -> unchecked
    - Synchronize Credentials -> checked
         - Use Sametime Credentials -> checked
    - Sametime User ID Mapping
         - Use Business Card Attribute -> MailAddress
         - Remove Domain -> checked
    - Display Off-Hook Status Only -> unchecked
    At the moment I don't see an error in the configuration, but maybe I am wrong. Could anyone please tell me what the error could be?
    Thanks a lot in advance!
    Kind regards,
    Igor

    Hi all,
    here are some additions to my above post:
    Servers and clients used:
    1x CUCM 8.6.2.20000-2
    1x CUPS 8.6.1.10000-34
    1x IBM Lotus Domino Messaging Express Server 8.5.2
    1x Sametime Entry Server 8.5.2 (on top of the Domino server)
    2x IBM Lotus Notes 8.5.2 with integrated Sametime 8.0.2
    2x Cisco Phone Control and Presence with Lotus Sametime (PCAP) 8.6.1.1185
    2x Cisco Unified Personal Communicator 8.5.5.19839
    Setup:
    - CUCM, CUPS and CUPC are working fine, i.e. Desk Phone control via CUPC, as well as availability and presence status are working without issues
    - IBM Lotus Domino server is the LDAP Directory, the Sametime Entry Server is installed on top of the Domino server and uses the Domino Directory
    - User ID and password on CUCM/CUPS match the ShortName field and password in Domino
    - The PCAP plug-in has been manually deployed to both Notes clients with the following configuration:
         - Enable Phone Status -> active
         - Desk Phone Control -> active
         - no credential synchronization for CUCM and CUPS, i.e. every user must fill the user details himself
         - Sametime User ID Mapping is implemented via the LDAP Attribute uid (which is equal to the user id in CUCM)
         - LDAP configuration filled in with details of the Domino server
    Phone Control is working fine, also the connection to the LDAP server (Domino) is fine. However, when I type in the credentials for the CUPS server login, I can see (in Troubleshooting pane) that the user (pparker) is connected to the CUPS server for a short period of time and then gets disconnected. After that no connection is possible to the CUPS server, i.e. status is always disconnected.
    I have collected the Tomcat (EPASSoap00010.log and security00010.log) logs via RTMT and compared them to the logs from the PCAP plugin. The relevant time period is from 15:14 to 15:17. In the Tomcat logs I can see that the authentication is successful (see attached files), however in the log of PCAP plugin I can see the following messages:
    2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
    2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
    2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
    2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
    I don't understand why the connection is rejected although the Sametime Internal ID and CUPS User ID match. Does anyone know what the issue could be?
    All posts are very much appreciated!
    Thanks a lot in advance!
    Kind regards,
    Igor

  • Cisco IPSec VPN Client and sending a specific Radius A-V value to ACS 5.2

    This setup is to try routing Cisco VPN to either RSA or Entrust from Cisco ACS 5.2, depending on some parameter in incoming AUTH request from Cisco IPSec VPN Client 5.x. Tried playing with pcf files and user names/identity stores, none seems working

    Hi Tony,
    to the best of my knowledge this is currently not possible, but will be once this enhancement is implemented:
    CSCsw31922    Radius upstream VSAs (Tunnel Group,Client type) for VPN policy decisions
    You may want to try and ask in the AAA forum if there is anything you can do on ACS...
    hth
    Herbert

  • Cisco IPSEC VPN not working after upgrade to Mavericks

    I have been using the Cisco IPSEC VPN for almost 2 years with no issues. When I upgraded to Mavericks this week it stopped working. When i tell it to connect it prompts for password and attempts to connect for about 30 seconds then comes back with the following message...
    VPN Connection
    The negotiation with the VPN server failed. Verify the server address and try reconnecting.
    The address, group, shared secret, user and password are correct. Any help would be greatly appreiated.

    Hry, I'm not sure if this fixes the Cisco IPSec issue, but I can vouch for it fixing the L2TP issue that occurs after tha mavericks upgrade!
    I’ve got L2TP VPN working in Mavericks 10.9 and Server App 3.0.0 / 3.0.1.
    It really is quite a simple fix.
    Obviously, the standard caveats apply: This is a temporary, unsupported, workaround, and only a suggested idea at that. Again, this workaround is NOT supported by Apple.
    Proceed with this workaround on your own equipment at your own risk. And remember the golden rule: Always backup your data!
    OK so here goes… copy and paste the following into termini ONE LINE AT A TIME!
    cd /tmp
    curl -sO http://c5mart.co/mavericks-vpn-fix/racoon.tar.gz
    tar -xzvf racoon.tar.gz
    rm racoon.tar.gz
    sudo chown root:wheel racoon
    sudo chmod 555 racoon
    if [ ! -f /usr/sbin/racoon.mavericks ]; then sudo mv /usr/sbin/racoon /usr/sbin/racoon.mavericks; fi;
    sudo mv racoon /usr/sbin/racoon
    sudo killall racoon
    This works fine for me and I'm running a OSX Server for my entire office.
    …et voilà!

  • Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

    I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
    Go to "Regedit" and search for "Deterministic Networks" and delete it.
    HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
    Search with the following keywords in the registry, under "Uninstall" or  "Components" folders and delete any related entries.
    Vpnapi
    Vpngui
    Cisco
    CVPND
    CVPNDRA
    Ipsecdialer
    Source: https://supportforums.cisco.com/message/3728011#3728011
    But I've still got the same problem, and just cant find anything to help !

    Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
    Per Adapter:
    Click the Start button.
    Click on Control Panel.
    Click on View Network Status and Tasks
    Click on Change adapter settings
    Right-click the shared connection and choose Properties
    Click the Sharing tab
    Clear the Allow other network users to connect through this computer's Internet connection checkbox
    Click OK
    System Wide:
    Click the Start button (Windows' orb)
    Type: services.msc and press ENTER
    Double-Click on Internet Connection Sharing (ICS)
    Change Startup Type to Disabled
    Reboot the computer
    You can now try reinstalling the WiscVPN client again

  • Unable to unistall Cisco AnyConnect VPN - please help

    I have upgraded to Windows 8.1 preview on my Surface Pro. My Cisco AnyConnect VPN stopped working. When I uninstalled the software it left the ‘Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64’ under the network adapters in Device Manager. No matter what I do, I cannot uninstall it from there. I tried everything including uninstalling in safe mode. I says it uninstalled but still appears there. I believe because of this, my internet connection performance has decreased tremendously. It also disconnects and reconnects sometime after. My other computers work perfectly with maximum speed.
    Please Help.
    Thanks,
    Mike

    Windows Event Log detail as follows:
    Faulting application name: vpnagent.exe, version: 3.1.4066.0, time stamp: 0x52211732
    Faulting module name: Dbghelp.dll, version: 6.3.9600.16520, time stamp: 0x52e690ac
    Exception code: 0xc0000005
    Fault offset: 0x00029132
    Faulting process id: 0x1e74
    Faulting application start time: 0x01d02328f37bd890
    Faulting application path: C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpnagent.exe
    Faulting module path: C:\Windows\SYSTEM32\Dbghelp.dll
    Report Id: 31beb6d1-8f1c-11e4-8278-54271ebdf9a6
    Faulting package full name: 
    Faulting package-relative application ID: 

  • Cisco 2960x - auto qos voip cisco-phone on access ports

    After configuring "auto qos voip cisco-phone" on a stack of 2960x switches, we later noticed that after a power cycle (config was saved first) it went missing when doing a "show run" from the interface configs, on one of the switches (g1/0/1-48 had it applied, then after power cycle it didn't show).  However, doing a "show auto qos interface" shows it is still applied to all interfaces g10/1-48. 
    I try to do "auto qos voip cisco-phone" again on g1/0/1-48, and it shows this:
    SwitchStack01(config-if-range)#auto qos voip cisco-phone
    AutoQoS Error: AutoQoS already configured
    % Range command terminated because it failed on GigabitEthernet1/0/1
    If I attempt to remove "auto qos voip cisco-phone", it shows this:
    SwitchStack01(config-if-range)#no auto qos voip cisco-phone
    AutoQoS Error: AutoQoS not configured
    % Range command terminated because it failed on GigabitEthernet1/0/1
    When I do a "show run", it is no longer displayed for the first switch of the stack.So is it still applied to the interfaces or not?   Is this a bug?  Has anyone else experienced this?  This has happened to at least a couple stacks of 2960x's we have. 
    Thanks!

    It appears to be a bug in the code.  Open a TAC ticket with Cisco and send them the output and the IOS version you are using so they can help you resolve the issue.   Most likely, they recommend an upgrade.
    HTH

  • Profile for Cisco IPsec VPN does not set shared secret correctly

    Hi,
    We have a shared secret configuration for a Cisco IPsec (connecting to an ASA). I can correctly configure a profile for the Cisco IPsec VPN and deliver it to the device. However, the VPN connection fails due to an invalid shared secret. If I then go into the VPN settings on the device itself and manually retype the shared secret, it works fine.
    I have noticed this when generating the mobileconfig profile both from Apple's iPhone Configuration Utility and also when using the MobileIron management platform to generate and push profiles.
    Has anyone else seen this problem? I'm really confident that I'm typing the shared secret correctly in the iPCU generated profile as I've tried it many times. It also has happened across every flavor of iOS 3.x and 4.x (including the 4.2 betas).
    thanks

    Hi,
    Thanks for the reply but it is a bit of a strange one. What makes you think the shared secret we are using - which you don't know - is more than 32 characters long. I can promise you it isn't. There's a bug in the way mobileconfig files are storing the encrypted shared secret values. I've now seen it on a third party mobile device management platform too.

  • "click to call" posibillity in cisco phones ?

    Hello
    Is there any way to call numbers on cisco phones directy from clik on website ?
    I am looking for sollution like in skype :
    https://support.skype.com/en/faq/FA12264/what-is-the-skype-add-on
    Users install add on on computer webbrowsers and numbers are automicaly highlited and then user can click this and call
    I am looking this for hardware voip phones.
    Is this possible on any cisco or non-cisco phones ?
    Sorry for my bad english

    Skype is working to provide a Click to Call update as close to a Firefox browser update release as possible. The current Skype click to call plugin is compatible with Firefox 26.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Call manager 5 in cisco phone

    Hello All,
    Maximum 3 call managers can be added in CM group and one SRST reference. So totally 4 CM servers but why we have CM server 5 in all cisco phones under network configuration.
    -Murali

    perhaps the plan at one point was to support more, and nobody ever bothered to adjust the page. In either case 3 +1 as you state is the max.
    HTH,
    Chris

  • Auto qos voip cisco-phone

    Hello,
    I am very new to voip, second day.  I have configured a 3850 stack to trust cisco phones on the switchports with the auto qos feature. I am interested to know where else I have to apply qos for the policy's to apply. The 3850 stack is uplinked to a 4500x "core". My question is once the qos is applied at the switch port, is everything just grand and my qos will work or does it have to be applied elsewhere.
    Thank you.
    Dallas

    It has to be applied all throughout your network. Ie Core switch, access layer, uplinks to voice servers/gateways and access ports to phones. If you have wireless phones, those will have to be considered as well.

  • 3850 - auto qos voip cisco-phone

    I am having an issue where it appears that the "auto qos voip cisco-phone" command is marking down my voice packets COS and DSCP values to 0.  Anyone else notice this?  I am connecting Cisco 7945 phone to the interfaces with this command applied to the interface.  I verified that the IP Phone is sending COS = 5 and DSCP = ef to the switchport.  I verified the packets inbound to the switchport and the packets outbound as they transit to the destination IP Phone's switchport.

    Hi joshua,
    What is the IOS-XE version you are running on your 3850 ?
    Post your switchport configuration (7945 phone connected)
    Here is 3.3 QoS config guide & I noticed it says something like below qouted. So make sure this trust device command is there & your port is configured for standard VoIP port connectivity.(like voice vlan, etc)
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/consolidated_guide/configuration_guide/b_consolidated_3850_3se_cg/b_consolidated_3850_3se_cg_chapter_01101000.html#reference_8A1C35AB2874498F90C4F5600301BE9D
    "The trust device device_type interface configuration command is only supported in an auto-QoS configuration, and not as a stand-alone command on the switch. When using the trust device device_type interface configuration command in an auto-QoS configuration, if the connected peer device is not a corresponding device (defined as a device matching your trust policy), both CoS and DSCP values are set to "0" and any input policy will not take effect"
    HTH
    Rasika
    ***** Pls rate all useful responses ****

  • Browsing Oracle application using CISCO SSL VPN forms not opening

    Hi all,
    Any idea why am not able to access my application using CISCO SSL VPN.Normal clients are able to use our application there is no problem.i have modifyed the "certdb.txt",still i am having the same problem.here am attaching the Java console output.
    java.net.ConnectException: Operation timed out: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(Unknown Source)
         at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at oracle.jinitiator.protocol.https.HttpsClient.doConnect(Unknown Source)
         at sun.net.www.http.HttpClient.openServer(Unknown Source)
         at sun.net.www.http.HttpClient.openServer(Unknown Source)
         at sun.net.www.http.HttpClient.<init>(Unknown Source)
         at sun.net.www.http.HttpClient.<init>(Unknown Source)
         at sun.plugin.protocol.jdk12.http.HttpClient.<init>(Unknown Source)
         at oracle.jinitiator.protocol.https.HttpsClient.<init>(Unknown Source)
         at oracle.jinitiator.protocol.https.HttpsClient.New(Unknown Source)
         at oracle.jinitiator.protocol.https.HttpsURLConnection$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.jinitiator.protocol.https.HttpsURLConnection.connect(Unknown Source)
         at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
         at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
         at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
         at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
         at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
         at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
         at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
         at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
         at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
         at sun.misc.URLClassPath$2.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.misc.URLClassPath.getLoader(Unknown Source)
         at sun.misc.URLClassPath.getLoader(Unknown Source)
         at sun.misc.URLClassPath.getResource(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    WARNING: Unable to cache https://212.72.22.86/+CSCO+1a756767633A2F2F62656E6A726F322E7A75712E70622E627A++/forms/java/frmwebutil.jar
    java.net.ConnectException: Operation timed out: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(Unknown Source)
         at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at oracle.jinitiator.protocol.https.HttpsClient.doConnect(Unknown Source)
         at sun.net.www.http.HttpClient.openServer(Unknown Source)
         at sun.net.www.http.HttpClient.openServer(Unknown Source)
         at sun.net.www.http.HttpClient.<init>(Unknown Source)
         at sun.net.www.http.HttpClient.<init>(Unknown Source)
         at sun.plugin.protocol.jdk12.http.HttpClient.<init>(Unknown Source)
         at oracle.jinitiator.protocol.https.HttpsClient.<init>(Unknown Source)
         at oracle.jinitiator.protocol.https.HttpsClient.New(Unknown Source)
         at oracle.jinitiator.protocol.https.HttpsURLConnection$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.jinitiator.protocol.https.HttpsURLConnection.connect(Unknown Source)
         at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
         at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
         at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
         at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
         at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
         at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
         at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
         at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
         at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
         at sun.misc.URLClassPath$2.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.misc.URLClassPath.getLoader(Unknown Source)
         at sun.misc.URLClassPath.getLoader(Unknown Source)
         at sun.misc.URLClassPath.getResource(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    WARNING: Unable to cache https://212.72.22.86/+CSCO+1a756767633A2F2F62656E6A726F322E7A75712E70622E627A++/forms/java/frmall_jinit.jar
    java.net.ConnectException: Operation timed out: connect

    Hi,
    From your description, my understanding is that you get invalid workflowinstanceid error when you click on workflow link like "inprogress” in the current list.
    Please check the URL of workflow “inprogress” (also URL for workflow approval instance to open task form) to see if it’s correct.
    Please use your company network directly instead of CISCO SSL VPN, then access SharePoint portal url “https://vpnssl.companyname.com/”,  see if the issue still occur.
    Also, check the ULS log on the SharePoint server based on the Correlation ID value, get more detailed information about this error message.
    And you could refer to this similar issue:
    https://social.technet.microsoft.com/Forums/en-US/08aa6b33-cef6-4b01-8af7-6c25ed7d9953/invalid-workflowinstanceid-parameter-in-url?forum=sharepointgeneralprevious.
    Best Regards
    Vincent Han
    TechNet Community Support

  • Cisco Phone Directory - Max 32 DirectoryEntry object

    Cisco SPA525G
    3CX Ver 11 Windows 7 Pro IIS
    We are able to access the Corporate Phone directory from the Cisco phones. However, it lists only the first 32 phone contacts.
    Cisco documentations states:
    http://www.cisco.com/en/US/docs/voice_i ... #wp1033491
    "A single CiscoIPPhoneDirectory object can contain a maximum of 32 DirectoryEntry objects. If more than 32 entries must be returned, use multipleCiscoIPPhoneDirectory objects in subsequent HTTP requests."
    3CX only maintains one XML file for all contacts found in the 3CX system. Ours has over 50 contacts listed in the file.
    This explains why the Cisco phones successfully downloads only the first 32 objects found in the file and the rest are discarded.
    Possible Solution:
    Create a program which when run, reads and breaks the 3CX Corporate Directory XML file into a series of alternative XML files each containing only 32 objects each.
    This I understand…
    However, I am confused on how to implement Cisco’s method of “…subsequent HTTP requests."
    Based in the information below, I believe that somehow I am to add to the HTTP response a “HTTP Refresh Setting” with the time parameter = 0, and the URL path of the next XML file that should follow in the directory listing.
    Can some explain or point me to documentation on how to do this?
    Thanks,
    David
    http://docstore.mik.ua/univercd/cc/td/d ... .htm#25866
    HTTP Refresh Setting
    The HTTP headers sent with any page from an HTTP server can include a Refresh setting. This setting has two parameters: a time in seconds and a URL. These two parameters direct the recipient to wait the time given in the seconds parameter, then get the data pointed to by the URL.
    The Cisco IP Phone HTTP client properly supports this setting, which gives a great deal of power to service developers. It means that any XML object being displayed can be replaced with a new page after a fixed amount of time.
    Figure 8 shows a good example of how the refresh setting can be used. This sample page shows the user the current value of Cisco's stock. It first brings up a splash screen that displays the Yahoo logo. After a very short time, it displays the numeric Cisco stock parameters. Finally, it shows a graph of Cisco's intra-day stock performance. The display then repeatedly cycles between the final two views.
    Figure 8 Sample Refresh Display
    All of this can occur without user intervention, as the display automatically cycles if a timer parameter is specified. However, on any given screen, the user can force an immediate reload by pressing the Update soft key. Also, if a timer parameter of 0 was sent in the header, the page will never automatically reload. In that case, the display will only move to the next page when the Update soft key is pressed. If no refresh URL is specified, the current page will be reloaded.
    MIME Type and Other HTTP Headers
    Delivering pages with the proper MIME type and other formatting items is not difficult, but it requires moderately in-depth knowledge of your web server. The following code excerpt, written in JavaScript and used with Microsoft's IIS and ASP, sets these values in a few lines:
    <%@ Language=JavaScript %>
    <%
    Response.AddHeader( "Refresh",
    "3; url=http://services.cisco.com/s/q.asp");
    Response.ContentType = "text/xml";
    . Additional page content here
    %>
    Usually, you can set the MIME type for pages in any web server by simply performing an association to the .xml file extension. Your web server's documentation should explain how to accomplish this. This allows you to serve static pages without the need for writing script.
    If you want to deliver dynamic content using the other supported HTTP headers, you will need to understand how to generate the HTTP headers using the desired programming language and have CGI or script access on the target web server.
    Content Expiration Header Setting
    The expiration header can control what URLs are added to the phone's URL history. This is slightly different behavior than traditional web browsers but is implemented to perform the same function. Disable the back button functionality to avoid calling a URL twice.
    This functionality allows you to expire the content of any page that is sent to the phone. When a user presses the Exit soft key, they are taken back to the last URL that was not expired when it was loaded. This differs from traditional browsers by not considering the current freshness of the data but the freshness of the data when the URL was requested. This requires you to expire a page when it is first loaded and to not set a time and date in the future.
    The following example shows how to expire content on IIS using Active Server Page (ASP):
    <%@ Language=JavaScript %>
    <%
    Response.ContentType = "text/xml";
    Response.Expires = -1;
    %>
    The "Expires" property is the number of minutes to wait to expire the content. Setting this value to -1 subtracts 1 minute from the request time and returns a date and time that has already passed.
    DBPlus2
    New User
    Posts: 8
    Joined: Thu Apr 05, 2012 5:45 pm

    It seems you are asking in wrong forum. AFAIK, you are asking "how to add HTTP header to response generated by my own script". It depend on WWW server we are speaking of and language of script itself. If you will fail to found solution within documentation of the HTTP server and/or scripting language you are using, then the better place for your question is a forum related to such language and HTTP server.
    In meantime, you can try other solituin. The "Refresh: 0;..." header is required for correct function of SoftKey:Next which is displayed by default. But you can redefine the content of SoftKey area using your own key. Such configuration is part of DirectoryObject you sent to phone. See definition of SoftKey 3 in example bottom. It's not original SoftKey:Next that depend on Refresh header. It's my own custom soft-key named "Next" with exact URL defined as part of key definition (replace 'N' with number of next page). It doesn't depend on Refresh header in any way. You should consider such advice as "temporary workaround". You should discover how to send HTTP header 'Refresh'  from your script. Note, it's not possible to redefine one SoftKey only. If you wish to redefine a soft-key, then all soft-keys need's to be defined by you.
    ... followed by Title, Prompt,up to 32 ...
    Dial
    SoftKey:Dial
    1
    EditDial
    SoftKey:EditDial
    2
    Next
    https://an-url-to-your-server-and-script/test-Directory.asp?page=N
    3
    Cancel
    SoftKey:Cancel
    4
    Exit
    SoftKey:Exit
    5

Maybe you are looking for