Cisco platforms that support TTCP

I would like to test through-put from my routers to a managment station using TTCP. Does anyone know which platforms support TTCP. I am unable to test through-put using TTCP on Cisco 827's.

According to next document:
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094694.shtml
"TTCP requires Cisco IOS® Software Version 11.2 or higher and Feature Sets IP Plus (is- images) or Service Provider (p- images).
Note: The ttcp command is a hidden, unsupported, privileged mode command. As such, its availability may vary from one Cisco IOS software release to another, such that it might not exist in some releases. Some platforms, for instance, require the Cisco IOS Enterprise feature set in order to perform this activity."
HTH

Similar Messages

Cisco devices that support Multicast traffic?

Folks,
I am looking for list of Cisco devices that support Multicast traffic. Does anyone know how to get this information?
Thanks,
Nagesh

Cisco Feature Navigator

Cisco switches that support IPv6 L2 security

I'm looking for Cisco switches that support IPv6 layer 2 security. The following features are required:
MLDv2 snooping [RFC4541]
DHCPv6 snooping [RFC3315]
DHCPv6 messages must be blocked between subscribers and the network so that false DHCPv6 servers cannot distribute addresses.
Router Advertisement (RA) filtering [RFC4862, RFC5006]
RA filtering must be used in the network to block unauthorised RA messages.
Dynamic "IPv6 neighbour solicitation/advertisement" inspection [RFC4862]
There must be an IPv6 neighbour solicitation/advertisement inspection, as in IPv4 "Dynamic ARP Inspection". The table with MAC-address and link-local and other assigned IPv6-addresses must be dynamically created by SLAAC or DHCPv6 messages.
Neighbour Unreachability Detection [NUD, RFC4861] filtering
There must be a NUD filtering function to ensure that false NUD messages cannot be sent.
Duplicate Address Detection [DAD, RFC4429] snooping and filtering
Only authorised addresses may be allowed as source IPv6 addresses in DAD messages from each port.
Source: http://www.ripe.net/ripe/docs/ripe-501
I've looked around in some configuration guides for some Cisco access switches but I can't seem to find any switch supporting these functionalities.

See if this helps.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-roadmap.html
You may also want to consult with your sales team.
What is the application?

Which was the last version of Firefox that Supported Java Platform 6 ?

I want to know the the last version of Firefox that Supported Java Platform 6 update 45 (Java SE Runtime Environment 6u45) ?
In other words which version of firefox started support for Java 7 ?

Please also give links to the problem pages if they are public so that we and others may test them. You could also consider contacting the sites concerned directly yourself.
Using Java can raise security concerns,and especially so using outdated versions.
* see a couple of Mozilla blogs <br />https://blog.mozilla.org/security/2013/01/11/protecting-users-against-java-vulnerability/ <br />https://blog.mozilla.org/decoder/2012/04/06/why-an-outdated-java-plugin-is-so-serious/
* and one of their own,noting the long list of links and security fixes.<br />https://blogs.oracle.com/security/entry/july_2013_critical_patch_update

App that supports multiple IM platforms

does anyone know if there is an app for iphone that supports multiple IM platforms, such as is available on desktop machines e.g. Pidgin, Trillian etc?

Hello
A couple I know off the top of my head
IM+ Lite
IM+ Pro
Palringo Instant Messanger
Beejive IM

Cisco Nexus 5548UP support SFP-10G-LRM ?

Hi all, I have a question about Cisco Nexus 5548UP. Is Cisco Nexus 5548UP support SFP-10G-LRM ? Because in CCW, i can't configure the SFP-10G-LRM. There is only SFP-10G-LR, SR, and the others, but there's no LRM. Pelase help me to answer this question. Thanks a lot

The LRM is s special case transceiver which supports 10 Gbps over older FDDI grade multimode fiber when used with a mode conditioning patch cord. It is not supported on the Nexus 5548UP.
The SFP-10G-LR is used with single mode fiber for spans up to 10 km in length. It is supported on the 5548UP (and most every platform of Cisco's that takes SFPs).
Please see the product data sheet here.

Small, cheap NAS box that supports nfs/rsync/ssh ?

Hi all,
for my personal backup needs, I'm looking for a standalone NAS box ("networked hard disk/raid solution"). I need to have support for at least one of rsync/nfs/ssh. (smb/ftp is not enough for me)
It shouldn't be too big (eg not the size of a regular pc.) and it shouldn't cost more then 350 euro or so without disks.
If I can mount one or two sata 1TB disks I'm happy.
Bonus points for solutions where I have total control over the "OS" on it, where the hardware platform exists of standardized easily replacable parts and if it's powerfull enough to do encryption. (I'm prepared to throw in extra cash for these features)
I guess my options are:
1) a product that supports what I want out of the box. I couldn't find that (unless ridiculously expensive, eg 500 euro or more without disks)
2) a product that *almost* does what I want, but where you can install a small Linux distro/freenas over the original firmware so you can do what you want. Basically any appliance (be it a storage device, embedded platforms, network equipment, ...) that can host hard disks and where you can overwrite the OS is worth looking into.
3) building something myself. I've seen some really small motherboards based on Atom cpu's, or even embedded stuff can be enough (something like soekris, pc-engines, etc). But it needs 2 sata ports then, I need to find a housing, a psu, etc. SFF-pc's such as shuttle's etc can also be good options
Any tips, pointers, ideas ?
Thanks
UPDATE:
Here is a list of some devices/urls/thoughts/questions I'm working on. Work in progress! I'll update.
Interesting url's
http://www.hardware.info/nl-NL/productd … S_devices/ off-the-shelf-nas
http://www.mini-itx.com/ all stuff mini-ITX
http://www.epiacenter.com all stuff epia
http://www.logicsupply.com/ mini-itx and SFF resource
http://www.logicsupply.com/matrix/mainboard mainboard matrix
http://www.mini-itx.com/reviews/atoms/ review of 5 Atom mini-itx boards with power comparison between the 2 intel chipsets
http://resources.mini-box.com/online/po … lator.html power calculator (not prepared for Atom though)
http://forums.vr-zone.com/showthread.php?t=275906 power comparison atom vs C2D
Chipsets
TDP's taken from http://download.intel.com/design/proces … 309219.pdf page 399, http://ark.intel.com/chipset.aspx?familyID=28994
type - TDP - usage - url
945 GM /GME express - 7 - used with atoms? - http://www.intel.com/products/notebook/ … erview.htm
945 GMS/GSE express - 6 - used on some atom boards who are not available yet (eg the MSI 9830/9832) - http://www.intel.com/design/chipsets/em … /index.htm
945 GC - 22.2 - used on nearly all current atom boards - http://ark.intel.com/chipset.aspx?familyID=28994
945 PM express - 6 - ?
943 GML express - 7 - ?
940 GML express - 7 - ?
945 GT express - 15 - ?
ultra mobile 945GU express - 5 - ?
G45 - 24 - "rich media" socket 775 boards - http://www.intel.com/Assets/PDF/designguide/319972.pdf
Q45 - 17 - "business" socket 775 boards - http://www.intel.com/Assets/PDF/designguide/319972.pdf
P45 - 22 - ?? - http://www.intel.com/Assets/PDF/designguide/319972.pdf
TDP's of complete systems
type - TDP idle - TDP loaded cpu - TDP loaded cpu+video - source url
945 GSE setup without HDD - 15 - 17 - ? - http://www.mini-itx.com/reviews/atoms/
945 GC setup without HDD - 25 - 27 - ? - http://www.mini-itx.com/reviews/atoms/
945 GC (and ich7) full setup - 27 - 31 - 38 - http://www.silentpcreview.com/article865-page5.html
G45 Express + C2D E6400 65nm full setup - 49 - 97 - 98 - http://www.silentpcreview.com/article869-page5.html
G45 Express + C2D E7200 45nm full setup - 35 - 64 - 65 - http://www.silentpcreview.com/article869-page5.html
Off-the-shelf NAS
* LaCie Ethernet Disk mini: needs to connect to internet to activate? or is this only for the remote feature? can you run custom OS on it?
* ximeta ndas seems to need special/proprietary drivers/calls to be able to use it?
* linksys nas200
seems pretty customizable. some 3rd party firmwares
http://www.linksysinfo.org/forums/showt … hp?t=60232
http://www.nslu2-linux.org/wiki/NAS200/Hardware
http://www.iomega-europe.com/section?SI … ecid=40380 (nslu2 firmwares)
slow: 3MB/s over 100Mbps
slower then dlink and qnap. see http://www.trustedreviews.com/networkin … -NAS200/p2
* intel SS4000E or something?
* qnap ts-509 or other qnap?
http://www.qnap.com/pro_detail_feature.asp?p_id=86 -> 480euro
http://www.qnap.com/pro_detail_feature.asp?p_id=104 -> 800 euro
* iomega storcenter
* netgear readynas: they have decent pricy ones who are big and consuming as much as an atom based server or something.
they also have smaller ones.:
2disk 310euro
4disk -> 1000 euro
http://www.netgear.nl/producten/product … od=RND2150 -> 300 euro
6disk http://www.netgear.nl/producten/product … d=RNDP6610 -> runs on an intel C2D -> 1500euro
* dlink
* thermaltake muse looks pretty cool http://www.xpcgear.com/n0001lnu.html 390 euro http://tweakers.net/pricewatch/149904/t … -wit).html
* synology has lots of stuff. eg http://www.synology.com/enu/products/CS407/index.php
http://www.synology.com/enu/products/DS207+/index.php -> 285 euro
http://www.synology.com/enu/products/DS408/index.php -> 510+ euro
http://www.synology.com/enu/products/DS508/index.php -> 800+ euro
* hp
http://www.hp.com/united-states/campaig … martserver
DIY-style (TODO: look up motherboards, enclosures, etc) miniITX, arm, via, intel atom,...
* info/tutorials
** http://blogs.sun.com/paulie/entry/zfs_n … _the_intel
** http://www.mashie.org/casemods/udat2.html (note: the 5disks into 3 bays thing is discontinued)
* complete boxes/barebones:
** Asus eeebox: perfect except that it can only contain 1 disk, of the format of 2.5"
** http://www.norcotek.com/DS-520.php 5x hotswap sata. Celeron, 2x Gbps,... looks great although very hard to get in EU apparently + you're bound to custom motherboard etc
** Shuttle XPC X27D dualcore atom, 1x 2.5 hdd. but 645GC http://loveno.be/product/16866
* motherboard/cpu combos
** http://www.via.com.tw/en/products/mainb … ard_id=610 Via C7 1.5Ghz, 4-8x sata, padlock engine, via gigabit controller. CF and miniPCI slot, 1xddr2
** http://www.intel.com/Products/Desktop/M … erview.htm . Atom 230 1.6Ghz. 1x IDE, 2x sata. only 100Mbit/s, 1x PCI, 1xddr2
** MSI MS-9830. fanless. 2x Gigabit. 2x sata. available yet?
** MSI MS-9832. http://www.logicsupply.com/products/ms_9832 2x Gbps, 4x sata. 1x ata. expected 1/20/2008
** Intel D945GCLF2 -> like D945GCLF, but dualcore,Gigabit.
** Intel DG45FC http://www.intel.com/Products/Desktop/M … erview.htm socket775, 4x sata, 2x Gbps,... -> based on intel G45 "media center" chip (eg more media features), but same price as DQ45EK !
** Intel DQ45EK http://support.intel.com/Products/Deskt … erview.htm socket775, 4xsata,Gigabit. -> based on intel Q45 "business" chip. perfect for the chenbro case, except no 5th sata (unless i loop the esata back in) or ide for the 5th 2.5" disk
** http://www.asus.com/products.aspx?l1=3& … odelmenu=1 Similar, but more media-features and 6x sata
** Jetway J7F4K1G5D-PB. Via C7. 2X Gbps, 2x sata 150, 1x ata 100
** Epia SN xx -> various epia boards with 4x sataII
* cases
** http://usa.chenbro.com/corporatesite/pr … ?serno=100 (nice mini ITX server case with 4x hotswap bays and PSU) (just make sure you have good AHCI suppport) 170euro
** http://www.xpcgear.com/pcv350b.html Lian-Li PC-V350B , 2x 5,5", 2x 3.5", microATX
Notes
* I heard via Epia is rather expensive especially for it's quite low performance
* Via nano might be a good platform (must google more for this, stable?)
* There are no Atom boards with more then 2 sata ports. (the msi's still are to be expected)
* Taking an intel board with a slow celeron / amd with sempron can be an option, it will be fast , stable and not expensive. I'm told it wouldn't pull too much power either. (although more then atom/epia)
* "ready-to-go" SFF-pc's/barebones can be found in the <300 euro price range, making this a good target for a simple 1/2-disk NAS
* AHCI problems with AMD/ATI RS400-200, RS480 HBA and Nvidia nForce 560. see http://en.wikipedia.org/wiki/Advanced_H … _Interface
* An intel G45/Q45-based system would be sweet, they have
- http://en.wikipedia.org/wiki/List_of_In … _Factor.29
- http://en.wikipedia.org/wiki/List_of_In … C_45_nm.29
with very low TDP, but they don't fit in socket 775
Last edited by Dieter@be (2009-01-30 10:11:53)

deadrabbit wrote:I recently bought an MSI Wind desktop, with pretty much the same thing in mind. I ended deciding against a NAS enclosure, since I wanted to be able to install a conventional Linux distro, and have complete control over it. The Wind is cheap, and all the hardware is Linux compatible (http://www.newegg.com/Product/Product.a … 6856167032). I ended up installing the OS on a CompactFlash card, so the hard drive would have to run constantly. As a result, it's nice and quite, uses little power, and the OS on the CF card is automatically backed up to the hard drive. I wrote up a detailed description of the project here: http://rockhoppernotes.blogspot.com/200 … sktop.html.
Thanks, looks quite good.
Except one thing: the 945GC chipset has a TDP of 22.2W.. that's stupid imo, and defeats the whole purpose of a low-tdp cpu such as the Atom. Right now I'm still doubting between waiting for an Atom board based on the 945GM(S)/945GSE chip (TDP 6Watt) (eeebox has that one, some MSI mini-ITX boards should be available in january) or going for a socket775 board with an intel core2 45nm cpu, which would consume not much more then Atom+ 945GC chipset (when idle, loaded is much more but I don't plan to load it ).
Nvidia is also working on an Atom chipset but I don't think I'll wait for that.

Dialling plan that supports star services for the UK

Wendy has sent me a dialling play that supporrts *21, but I need a UK dialling plan that supports all fo the UK star services as below - Can anyone help please?
SET ANONYMOUS CALL REJECTION *227#
CHECK ACR *#227#
CANCEL ACR #227#
Call Divert on all calls
SET CALL DIVERSION * 21 * [phone number] #
CHECK CALL DIVERSION * # 21 #
CANCEL CALL DIVERSION # 21 #
Call Divert on no reply
SET DIVERSION ON NO REPLY * 61 * [phone number] #
CHECK DIVERSION ON NO REPLY * # 61 #
CANCEL DIVERSION ON NO REPLY # 61 #
Divert on no reply: *61*number*wait# == (Extra System Y facility only - does not work on 410567 as of Dec 2011)
Wait is two digit time in seconds (05 to 60) before redirection takes place.
Call Divert on busy
SET DIVERSION ON BUSY * 67 * [phone number] #
CHECK DIVERSION ON BUSY * # 67 #
CANCEL DIVERSION ON BUSY # 67 #
Call Divert on no reply or busy
SET DIVERSION ON NO REPLY & BUSY * 66 * [phone number] #
CHECK DIVERSION ON NO REPLY & BUSY * # 66 #
CANCEL DIVERSION ON NO REPLY & BUSY # 66 #
Call Minder (Voicemail)
CALL MINDER SERVICE 1571
Call Waiting
SET CALL WAITING * 43 #
CHECK CALL WAITING * # 43 #
CANCEL CALL WAITING # 43 #
Caller Display
SET CALLER DISPLAY DATA ON *234#
CHECK CALLER DISPLAY DATA *#234#
CANCEL CALLER DISPLAY DATA #234#
Caller ID
WITHHOLD CALLER ID 141 [phone number]
RELEASE CALLER ID 1470 [phone number]
CALLER RETURN 1471
ERASES LAST NUMBER GIVEN ON CALLER RETURN 1475
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Charge Advice
SET CHARGE ADVICE (BEFORE A CALL) * 40 * [phone number] #
SET CHARGE ADVICE (FOR ALL CALLS) * 411 #
CHECK CHARGE ADVICE *# 411 #
CANCEL CHARGE ADVICE # 411 #
Choose to Refuse
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
I
ncoming Call Barring
SET INCOMING CALL BARRING * 261 #
CHECK INCOMING CALL BARRING * # 261 #
CANCEL INCOMING CALL BARRING # 261 #
Miscellaneous
CHECK WHICH SERVICES ARE ACTIVE * # 001 #
BT LINE TEST & RINGBACK FACILITY 17070
REDIAL LAST NUMBER DIALLED **0
Outgoing Call Barring
SET OUTGOING CALL BARRING * 34 option #
CHECK OUTGOING CALL BARRING * # 34 #
CANCEL OUTGOING CALL BARRING # 34 option * [PIN] #
Reminder Call Service
SET REMINDER CALL (using 24 hour clock with 4 digits) * 55 * [time] #
CHECK REMINDER CALL * # 55 #
CANCEL REMINDER CALL # 55 #
SET REGULAR REMINDER CALL * 56 * [time] * [day option] #
CHECK ALL REGULAR REMINDER CALL * # 56 #
CANCEL A REGULAR REMINDER CALL # 56 * [time] * [day option] #
CANCEL ALL REGULAR REMINDER CALLS # 56 #
Day options numbers: Monday - 1, Tuesday - 2, Wednesday - 3, Thursday - 4, Friday - 5, Saturday - 6, Sunday - 7, Monday - Friday: 8 Every Day - 9.
Remote (Smart) Call Divert on all calls
SET REMOTE CALL DIVERT ON ALL CALLS * 44 * [PIN] * [your full phone number] * [number to divert to] #
CHECK REMOTE CALL DIVERT ON ALL CALLS # 44 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON ALL CALLS * # 44 * [PIN] * [your full phone number] #
Remote (Smart) Call Divert on no reply
SET REMOTE CALL DIVERT ON NO REPLY * 64 * [PIN] * [your full phone number] * [phone number to divert to] #
CHECK REMOTE CALL DIVERT ON NO REPLY # 64 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON NO REPLY * # 64 * [PIN] * [your full phone number] #
Remote (Smart) Call Divert on busy
SET REMOTE CALL DIVERT ON BUSY * 65 * [PIN] * [your full phone number] * [phone number to divert to] #
CHECK REMOTE CALL DIVERT ON BUSY # 65 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON BUSY * # 65 * [PIN] * [your full phone number] #
Ringback
SET RINGBACK [phone number] 5
CHECK RINGBACK *#37#
CANCEL RINGBACK #37#
SET RING BACK INHIBIT *02*37#
CHECK RING BACK INHIBIT *#02*37#
CANCEL RING BACK INHIBIT #02*37#
CALL ROUTING VIA BT
(when using another provider) 1280

Hi Jon,
After thorough discusiion with engineering team and marketing team, we have decided to support most star services you requested except the following items. I have created a PMF for it. Please send me an email at [email protected]. I will reply you with the PMF.
Call Minder (Voicemail)
CALL MINDER SERVICE 1571
Call Waiting
SET CALL WAITING * 43 #
CHECK CALL WAITING * # 43 #
CANCEL CALL WAITING # 43 #
Caller ID
WITHHOLD CALLER ID 141    [phone number]
RELEASE CALLER ID 1470 [phone number]
CALLER RETURN 1471
ERASES LAST NUMBER GIVEN ON CALLER RETURN 1475
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Choose to Refuse
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Incoming Call Barring
SET INCOMING CALL BARRING    * 261 #
CHECK INCOMING CALL BARRING    * # 261 #
CANCEL INCOMING CALL BARRING    # 261 #
REDIAL LAST NUMBER DIALLED **0
Outgoing Call Barring
SET OUTGOING CALL BARRING * 34 option #
CHECK OUTGOING CALL BARRING    * # 34 #
CANCEL OUTGOING CALL BARRING    # 34 option * [PIN] #
Reminder Call Service
SET REMINDER CALL (using 24 hour clock with 4 digits)    * 55 * [time] #
CHECK REMINDER CALL * # 55 #
CANCEL REMINDER CALL # 55 #
SET REGULAR REMINDER CALL    * 56 * [time] * [day option] #
CHECK ALL REGULAR REMINDER CALL    * # 56 #
CANCEL A REGULAR REMINDER CALL    # 56 * [time] * [day option] #
CANCEL ALL REGULAR REMINDER CALLS    # 56 #
Day options numbers: Monday - 1, Tuesday - 2, Wednesday - 3, Thursday - 4, Friday - 5, Saturday - 6, Sunday - 7, Monday - Friday: 8 Every Day - 9.
Ringback
SET RINGBACK [phone number] 5
CHECK RINGBACK   *#37#
CANCEL RINGBACK #37#
SET RING BACK INHIBIT *02*37#
CHECK RING BACK INHIBIT *#02*37#
CANCEL RING BACK INHIBIT #02*37#
Best regards,
Wendy

Does it have a feature that supports management with accounts, fixed IP, VLAN ?

I'm not quite familiar with those advanced features if it does exist as the fact that i've been primarily using cheap and unknown AP products for years :D I'm planning on upgrading my APs for personal reasons. Could anyone tell me does it have a feature that likely supports management with accounts, fixed IP, VLAN? What is it called and which product could fit my needs?
Thanks.

My name Eric Moyers. I am an Engineer in the Small Business Support Center.
Thank you for the question. Currently all of our Small Business Wireless Access Points support Management accounts, fixed ip's and vlans.
Here is a link for some model comparisons.
http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html
http://www.cisco.com/c/en/us/products/wireless/small-business-100-series-wireless-access-points/models-listing.html
http://www.cisco.com/c/en/us/products/wireless/small-business-300-series-wireless-access-points/models-comparison.html
http://www.cisco.com/c/en/us/products/wireless/small-business-500-series-wireless-access-points/models-comparison.html
If you have any other questions or some specific questions, I am most happy to answer them. You can repost here or if you mouse over my picture you will see my email and can email me directly.
Eric Moyers
.:|:.:|:. CISCO | Cisco Presales Technical Support | Wireless Subject Matter Expert
Please rate helpful Posts and Let others know when your Question has been answered.

Does CISCO C3560X VLAN support multiple Network segments which are further configured with HSRP function

Hi Cisco experts,
My name is Kumagai and I need your expert opinions below.
I am trying to configure one VLAN1 support multiple network segments as below.
(this should be a very straight forward configuration and should be OK, I think ? )
interface Vlan1
ip address 172.30.0.0 255.255.128.0
ip address 172.30.31.253 255.255.254.0 secondary
ip address 172.30.61.253 255.255.254.0 secondary
ip address 172.30.71.253 255.255.254.0 secondary
ip address 172.30.4.253 255.255.255.0 secondary
The only issue that is eating me is the above network segments are using HSRP too
and I am not sure is this possible with a combination of VLAN1 supporting multiples which are
further supported with HSRP settings in Cisco environment.
!example of HSRP:
interface Vlan4
ip address 172.30.4.253 255.255.255.0
no ip redirects
standby 4 ip 172.30.4.254
standby 4 priority 105
standby 4 preempt
<<< what will happen if I add the HSRP configuration as below into the above VLAN1 with multiple Network segment ??)
I would like to summarize my "Combined" configurations as below but I need your expert opinions on
whether the configuration below is workable without any problem ??
Or it is a total flop because Cisco does not support the configuration below !!!
interface Vlan1
ip address 172.30.0.0 255.255.128.0
ip address 172.30.31.253 255.255.254.0 secondary
ip address 172.30.61.253 255.255.254.0 secondary
ip address 172.30.71.253 255.255.254.0 secondary
ip address 172.30.4.253 255.255.255.0 secondary
standby 30 ip 172.30.31.254
standby 30 priority 105
standby 30 preempt
standby 60 ip 172.30.61.254
standby 60 priority 105
standby 60 preempt
standby 70 ip 172.30.71.254
standby 70 priority 105
standby 70 preempt
standby 4 ip 172.30.4.254
standby 4 priority 105
standby 4 preempt
Thanking you in advance !!!!!

Hi,
As far as i know we dont set the ip helper address on the radio interface. It should be on the L3 interface of corresposding VLANs i.e.
int vlan 20
ip helper-address 192.168.33.xxx
int vlan 60
ip helper-address 130.20.1.xxx
I'm assuming that your using SVI's (int Vlan 20 and int Vlan 60) rahter than physical interfaces. Also hope you have configured switch port as trunk where this AP is connected.
Modify the AP config as below since you are using data vlan as the native vlan
interface Dot11Radio0.20
encapsulation dot1Q 20 native
interface FastEthernet0.20
encapsulation dot1Q 20 native
Ideally your AP fastethernet configuration should looks like below and not sure how you missed this as this comes by default when you have multiple vlans for multiple ssids.
interface FastEthernet0.20
encapsulation dot1Q 20 native
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.60
encapsulation dot1Q 60
no ip route-cache
bridge-group 60
no bridge-group 60 source-learning
bridge-group 60 spanning-disabled
Hope this helps.
Regards
Najaf

What are all the o/ss that support java?

I have been coding and testing java apps under windows NT. I have been asked to provide information of all the o/s that support java, to enable platform independence. So for eg, if I were to run my java application on Hp or Sun, do I need different runtimes of java, or is there a common java runtime for all flavors of unix. Also, is the ide for linux different from other unix versions. Basically I need a complete list of vendor, o/s and java runtime version that will run on the same. Where can I get this list.
Thanks,
Durga

this link may help u
http://java.sun.com/products/plugin/1.3/docs/quick_start.html
-Mala

Is Cisco Nexus 5596UP support vlan base Policing and traffic shaping on code NX OS version: 5.1(3)N1(1)

Is Cisco Nexus 5596UP support vlan base Policing and traffic shaping on code NX OS version: 5.1(3)N1(1)
where i couldn't see any police command under the policy map

I have tested this issue on another 5548UP with L3 running the same NX-OS version and get the same problem. Show CDP from the switch is not discovering devices, but the neightbors can see the 5K in question. Reboot sometimes will fix it, but not always. I suspect a problem with the software since that doesn't happen in NX-OS 5.2. The one I am using is
Software
BIOS:      version 3.6.0
loader:    version N/A
kickstart: version 5.1(3)N2(1)
system:    version 5.1(3)N2(1)

I Want Buy Cisco ASA Firewall Supporting SIP

Hello Guys I want to buy cisco ASA Firewall , that support SIP and Session Border Controller (SBC) So please can any one tell me the most power full that support this protocols ,, Than you guys

Hi Vijay,
If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you
HTH,

Cisco supervisor Desktop support for Windows 7

We are getting ready to rollout Windows 7. We ran into a problem while testing Historical Reports and Cisco supervisor Desktop on Windows 7. Historical Reports installs just fine while CSD give us an error that the operating system is not supported by Cisco. Is there a current version that supports Windows 7?
Our IPCC version is:
Cisco Application Administration - 7.0(1)SR05_Build504
Package: Cisco Unified CCX Enhanced
Any help with this issue would be greatly appreciated.
Thanks,
Yefim

Yes, you are wandering down a long and lonely road.
Repackaging an install package from an .exe (which could be one of a million types of installer, such as InstallShield) to an MSI isn't a trivial task - it's a fairly specialist piece of work.
You can only open MSIs with Orca, it doesn't support other types of install package.
I would suggest if you have a workable solution with ThinApp you'd be best to leave it there...
Aaron

Oracle Adapter for SAP that supports Integration with SAP 6.0??

Hi,
I am working currently with Oracle Adapter for SAP with SAP 4.6.
But my company is looking for upgrading the Enterprise SAP system to 6.0.
Do we have Oracle Adapter for SAP that supports SAP 6.0? Please let me know if anyone has already worked on this?
Thanks,
Sasi Bhushan

Sasi,
There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
12.4.1 MySAP ERP Versions and APIs
The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
ERP:
■ SAP R/3 Enterprise 47x100
■ SAP R/3 Enterprise 47x200
■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
■ SAP Java Connector (SAP JCo) Version 2.18.
For the current release status of the SAP Java Connector, refer to SAP Note #549268
in the SAP Service Marketplace.
Release versions may vary by product component. In addition, SAP functions may
vary by SAP product version and support package.
Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
It is not recommended to use the OracleAS Adapter for MySAP ERP with older
versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
example SAP R/3 4.6C, prior approval from iWay Software Product Management is
required.

Cisco platforms that support TTCP

Similar Messages

Maybe you are looking for