Cisco Prime 1.2 Licensing question

Hi all,
I am try to design a wireless solution where we will use WLC, MSE, ACS and we want to hace map location of the ap.
It is a new solution, no a upgrading
For the use of map and location in Cisco Prime wich license is required?, just with the lifecycle can i do?
This solution is for a 120 ap´s, i list the license what i think that i need
R-PI12-K9
R-PI12-BASE-K9
L-PI12-LF-100
L-PI12-LF-50
I hope be clear
Regards,
Sebastian

I beleive that with life cycle you should be able to do maps, although you will obviously need a base as well.
Also, I don't beleive that you can get ACS anymore, so you will be looking at ISE instead.

Similar Messages

  • Cisco Prime Collaboraiton Standard Licenses

    Dear Team,
    I have a customer purchased Cisco CUWL PRO & Enhanced Licenses for 10,000 Users for Unified CM version 8.0 and now he is asking for upgrade to version 10.5. The question is :
    1-since he did reinstatement for different type of licenses and already has the order, Should the customer entitle Cisco Prime Collaboration licenses by default or he has to purchase them separately?
    2-Does the customer going to receive Cisco Prime Collaboration Standard (Porvisioning and Assurance only) ?, If so for How many license Users it comes by default?. If less than 10000 ,then how to order the remaining?.
    Thanks in advance
    Regards,

    Prime collaboration standard is free and does not require any licenses. Advanced license is separate from any UC user licenses:
    Cisco Prime Collaboration Packaging: Standard and Advanced Options
    Beginning with version 10.0, Cisco Prime Collaboration is provided in two different offerings. Cisco Prime Collaboration Standard is included with all Cisco Unified Workspace Licensing and Cisco User Connect Licensing, and Cisco Prime Collaboration Advanced is available for upgrade. The Standard option is only available and compatible with Cisco UC 10.0. The Advanced option supports Cisco UC 8.x - UC 10.x. The Standard option enables provisioning of all voice and video services purchased and fault monitoring across voice and video for a single cluster environment. For deployments that require more advanced management, Cisco Prime Collaboration Advanced offers multi-cluster scale, additional automation, deeper diagnostic capabilities, and long-term reporting. This order guide addresses Cisco Prime Collaboration Advanced only.
    Customers who are interested in Cisco Prime Collaboration Advanced may activate the “Advanced Evaluation” from within the Prime Collaboration Standard GUI, for a 60 day term, or may purchase a permanent Cisco Prime Collaboration Advanced. For more information about license installation, please refer to the Cisco Prime Collaboration Quick Start Guide 10.0 posted on Cisco.com under ‘Install and Upgrade Guides.
    from:
    http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-collaboration/guide-07-729809.html
    Chris

  • Cisco Prime NCS appliance & license

    Hi all,
    I'm looking for getting a Cisco prime NCS appliance (PRIME-NCS-APL-K9). I'm a little bit confused regarding to the license scheme:
    1. Does the appliance has any license coming with it or we need to order the license separately?
    2. If I have an WLC 5508 (license support 12 APs) & 12 3500 APs, then number of devices counted will be 1 (WLC) or 12 (APs) or 13 (WLC + APs) ?
    Thanks for the help,

    Cisco Prime Infrastructure for the  first time you may access the lifecycle and assurance features using the  built-in evaluation license that is available by default. The default evaluation  license is valid for 60 days for 100 devices and 150 interfaces. You will need  to purchase the base license and the corresponding feature license before the  evaluation license expires. Cisco Prime Infrastructure 1.2 can be ordered using  the standard Cisco® ordering tools at http://www.cisco.com/go/ordering. More information about getting the  license files can be found in the Cisco Prime Infrastructure 1.2 Ordering and  Licensing Guide

  • Cisco Prime Infrastructure, Express, licensing

    Are there any funcionatility limitation between each edition of the Cisco Prime Infrastructure other than supported number of devices?
    Does it support turning APs on and off on a predefined scheduled?
    I read in the manual "Cisco Prime Infrastructure Classic View Configuration Guide for Wireless Devices" that it is possible to Managing WLAN Status Schedules.  Does it require the assurance license feature set or will lifecycle license will be sufficient?

    I believe you could create a scheduled Lightweight AP Configuration Template job and have it simply turn off the radios on the selected APs. Make it recurring (every night at a certain time) and add a complementary recurring job to turn the radios back on at the desired time.
    See the following screeenshot from PI 2.0 (click to enlarge):

  • Cisco Prime Infrastructure and VMWare Question

        We currently do not have any VMWare configurations. Do we need to have an existing VM server to deploy the virtual appliance. I have been told it comes with an instance that I can deploy. We have a server that is new and beefy with plenty of RAM and Xeon 6 core running windows server 2008 R2. I have deployed VMware in the past. I just want the community input - Talking about Prime Infrastructure 1.1 virtual appliance.
    Thanks              

    The virtual appliance needs to have a VMware hpervisor. You can use ESXi as a bare metal hypervisor.

  • Cisco Prime Infrastructure Channel utilisation question

    When I open Monitor - Site Maps - <building map> you can select a number of options on the left hand side for Access Points.
    I have selected utilisation as I wanted to see which APs were being used heavily on the b/g/n radio.
    Now what I'm seeing in some cases is RX=0 TX=0 Ch=94%, so is this the channel that's 94% used? I'm assuming it is.My understanding is that the channel utilisation being so high will cause traffic to buffer and queue...is that right?
    What can I do about it? It's a high density area with plenty of APs (I've even switched off the b/g/n radios on some of these to help) with a lot of users and transient through traffic.

    In high density and depending on how many APs and their location, you still need to tweak RRM. RRM of course will help, but not 100% of the time. So you have a mix of CleanAir and non CleanAir, so that tells me that you can't have CleanAir enabled... best practice. If you have your data rates at default, that is another issue. If your DCA is default at 10 minutes, your channels might be converging too much and that cause clients to drop. These are some of the thing that I have ran into in high density deployments and have had to tweak along with other stuff.
    Sent from Cisco Technical Support iPhone App

  • How view snmp Traps CISCO PRIME 1.2

                       It is posible to view snmp Traps from WLC to CISCO Prime ?? How ?

    Hi Steve :
    I need to view the traps which are generated in the Controller, I need to view that in the Cisco Prime Infractructure. I´ve configured Communities in WLC with IP Address to Cisco Prime and Trap Receiver with IP address to Cisco Prime.
    Now, How can I view these Traps in the Cisco Prime ?.
    Another question , Is it posible to configure Switch from Cisco Prime ?
    Thanks,
    Claudio

  • CISCO PRIME INFRA 1.1 License

    Hai Recently, we are installing cisco Prime NCS 1.1  and we are facing some issue for License.
    I would like to clarrify the below licneses.
    L-WCS-NCS1-M-K9
    L-PINCS11-300-U
      L-PINCSW11-300-U
    We installed the second licnese and got 300 device limit. But we have 500 access points in our network. We are using NCS only for Wireless Management and not for Network Devices which is using LMS .
    I am confused, we have additional 2 more licenses as above and why is that for??? can any one let me know these!!! Y we are using WCS-NCS license and it is having lonly 25 device limit support , which we cannot import since i already upload the second licnes. Also y this L-PINCSW11-300-u WAN license used for????

    You can always remove the license if you installed the wrong license....You need to install your base first then your adder.  You don't need to use the LMS or WAN as this comes free with NCS 1.1.  The WCS to NCS migration comes with a free 25 ap base license.  You just need to make sure you have purchased the correct license to cover your 500 ap count.
    Here is another thread regarding the license:
    https://supportforums.cisco.com/message/3672947#3672947
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Cisco Prime Infrastructure 1.2 licensing

    I have a customer that is running CiscoWorks 3.2 and they also have NCS 1.1 (upgraded from WCS 7.0).  They have found that it costs way more to upgrade CiscoWorks to Cisco Prime Infrastructure than it would be to just buy licenses after they finish upgrading NCS to Cisco Prime 1.2. 
    The main question about Cisco Prime 1.2 is how the licensing works, we need to know if the licensing will work the same as it did for CiscoWorks where they only needed one license for a full stack of switches.  They believe that Prime 1.2 will require a license for each switch in the stack, which will cause them to buy several more licenses than what they feel they can afford.
    If anyone knows how the licensing works, it would be appreciated.
    Thanks.

    Have you gone through the below link
    http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/guide_c07-714720.html

  • Can i install Cisco prime infrastructure 1.3 with 1.1 license.

    Can i install Cisco prime infrastructure 1.3 with 1.1 license.To be more precise it will be fresh installation
    but the licenses I have is of 1.1.As per my overview from Cisco prime Infrastructure 1.2 NCS and NCS(WAN)
    has been bundled into one service.But both were seperate entities in Cisco Prime Infrastructure 1.1.

    It doesn't matter if you want to make a new installation or an upgrade. The questions is the license.
    The base license is necessary for network management nodes (devices). But to get updates for your system you need the additional to your Base License the Lifecycle License (which can be ordered for 12, 24 or 36 months).
    The Lifycycle License is also based on the number of managed devices. In your case 50 devices. So you have that License - congratulations!
    Otherwise order the Lifecycle License for 50 devices (L-N-PI12-50-M). This generates CON-PSUU-PI12LF50 for 12 months, list price 414,81$. Then Upgrade from 1.1 to 1.2, patch the system and upgrade to 1.3.
    Have fun,
    Chris

  • Cisco Prime Collaboration Deployment with BE7K and VMWare license

    Hello, I am looking for some help trying to figure out if Cisco Prime Collaboration Deployment can be used to upgrade our existing 7.1.5 cluster.  From what I have read there is a API problem with the VMWare license that comes with the BE7K.  But after reviewing the BOM/quote from my VAR it lists the foundation license which based of the release notes is supported.
    UCSS-U-VMW-FND-5-1
    UCSS Cisco UC Virt. Foundation  Five Year - 1 server
    Has anybody out there had expericne with PCD and BE7K'?
    This is from release notes of PCD
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_P139675A_00_pcd-rns-1051/CUCM_BK_P139675A_00_pcd-rns-1051_chapter_010.html
    Search for “Business Edition 7000” and it will state it is not supported with PCD.  It is because the licenses that the BE 6k and 7K are shipped with don’t enable certain VMware APIs that PCD needs.
    “Virtualization Software License Compatibility
    Cisco Prime Collaboration Deployment is not compatible with all license types of VMware vSphere ESXi, as some licenses do not enable required VMware APIs.
    The following are compatible with Cisco Prime Collaboration Deployment:
    Cisco UC Virtualization Foundation (appears as "Foundation Edition" in vSphere Client)
    VMware vSphere Standard Edition, Enterprise Edition, or Enterprise Plus Edition
    Evaluation mode license
    The following are not compatible with Cisco Prime Collaboration Deployment:
    Cisco UC Virtualization Hypervisor (appears as "Hypervisor Edition" in vSphere Client)-preloaded on Cisco Business Edition 6000 and Business Edition 7000
    VMware vSphere Hypervisor Edition
    Any help would be appreacted.
    JP

    Thanks Jamie for repsonding, we haven't made any purchase's yet but I wanted to ensure we are purchasing a solution that won't lead to a lot of frustration.  We only have 1000 phones so we are pretty small and the BE7K seems to be a good fit and value.
    Cheers,

  • Cisco Prime NCS 1.3 Licensing issue

    Hello,
    I am installing Cisco prime NCS x 2 servers. I downloaded the licenses which are ordered allong with the devices as follows.
    Product Name                : L-PI12-LF-50-LIC
        Product Description         : L-PI12-LF-50-LIC:Prime Infrastructure 1.2 - Lifecycle - 50 Device Lic PAK
        Product Qty                 : 1
        UDI                        : PID: PRIME-NCS-APL-K9
    The issue is, the NCS appliance was not started properly and then I used the CD which came along with the server (NCS 1.3). Now my system is up and running but it is NCS 1.3 and when i upload the licenses, it shows that the UID is not matching with the system. Is this because the licenses are issued for NCS 1.2 and my system runs on 1.3? If so, what do you suggest, do i need to download NCS 1.2, install it, add the license and then upgrade to 1.3?
    Thanks for your advise,
    Regards
    Jay

    Prime Infrastructure has a support forum at:
    https://supportforums.cisco.com/community/netpro/network-infrastructure/network-management
    Please post this to that forum to reach PI experts.
    Regards

  • Cisco prime license confusion

         Hi I have installed cisco prime 1.2 to manage router, AP, controller, switch and ISE
    and I am confused wiht license
    I have this 3 item
    1. L-PILMS42-100
    2. L-PINCSW11-100                  
    3. L-PINCS11-100
    I have already genereted and added item 3 on prime and it work
    I gererated item 1 but I cannont add it on cisco prime, he dont reconnize the file
    I am unnable to add my ISE on cisco prime
    Do I need special licence fro ISE
    Do I need to add the 3 license
    Please advise

    Do you want to use Prime Infrastructure or Prime LMS to manage the Catalyst 2960 switches? In either case it is possible - simply add the devices manually or discover them. Procedure for PI is here. Procedure for LMS is here.
    The ISE appliances are not manageable in any but the most basic sense as they are not a supported Cisco device (for either Prime Infrastructure or Prime LMS) and will be seen the same as a generic non-Cisco deivce. i.e., only SNMP polling and traps (and, with LMS, potentially syslog data).

  • Problem with implementing license in Cisco Prime Infrastructure 2.2

    Goodday,
    For Cisco Prime Infrastructure 2.2 I downloaded an license from the license portal.
    This concerns a eval/demo license, for an demo of Cisco Prime Infrastructure 2.2.
    When selecting the the type of license you get a few options, from which I selected the basic, advanced and lifecycle evaluation licenses. This is the type of license that is required for our demo.
    After completing the wizard I can download en implement the license.
    Until this point everything goes as it supposed to be.
    When i go to the Prime Infrastructure 2.2 appliance (running on VMWare ESXi 5.5.0).
    When I go to the license section in Cisco Prime Infrastructure I can implement the license, however if I implement the .lic file I get the error “Unknown feature (PI_VM)”.
    I have done implementing license files before, but this is the first time i encounterd this problem.
    Who can help me with this error?
    Regards,
    Dennie Verhoeven

    Hi Dennie,
    PI2X-BASE-LF-AS-US-VM-N-EVAL-90   >> I think you have used this product name while generating the license
    Either you try generating a new license or  contact cisco license team to generate a new license
    with the information  like below ::
    Product Name                : R-PI2X-K9
        Product Description         : R-PI2X-K9:R-PI2X-K9 : Cisco Prime Infrastructure 2.x
        Product Qty                 : 1
        UDI                        : PID: PRIME-NCS-VAPL  SN: ANY:ANY
    Serial no : with ANY:ANY will work as  starting from PI 2.2 , there is no node locking with license.
    Thanks-
    Afroz
    ****Ratings Encourages Contributors ****

  • Cisco Prime TFTP Server Question

    Our organization recently installed Cisco Prime 1.3 on a Linux box.  I am used to using the older WCS which also had a built in TFTP server.  The old WCS was installed on a Windows Box and thus I was able to navigate to the TFTP server using Windows Explorer and the UNC path.  However, I cannot seem to access the TFTP server on the new Prime 1.3 server via that method.  I have verified that the TFTP and FTP servers are both enabled in Prime server settings and I have also verified that I can access the FTP port via a PC on the network and that the WLCs on the network are sucessfully backing up to the Prime TFTP server each night. 
    How can I access the TFTP server to retrieve these WLC backups if needed?  

    you need to enable root access.  then you can scp the files out of the directory easily enough.
    from cli
    root_enable
    follow prompts
    root
    psswd - set password
    should be abel to ssh as root at that point, if you can want to say it's /localdisk/tftp, or just ls /localdisk
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

Maybe you are looking for

  • Using DMZ to connect to internet

    I am having problems accessing the internet when changing route from using outside to DMZ to access the internet. Reason for this change is because I have a FTP-server in DMZ that also needs access to the internet through DMZ. The main server has two

  • Fetching prices from price list without condition technique

    Hi, I have a situation where i need to create a price list of materials which will not be used in my regular sales process pricing. I would require these prices to send the data to an external interface. As per my understanding the price list is used

  • Vendor consignment warehouse

    Hi All, I wonder if you can give me some tips on how to handle the following requirement. My company wants to put in place a consignment warehouse for one vendor. This vendor is now delivering components directly to 5 different plants (1 SAP & 4 lega

  • What are the advantages of utilizing a dynamic VI compared to utilizing the VI Call Configuration Dialog Box Reload for each call option?

    Is it more efficient to use a dynamic VI or utilize the VI Call Configuration Dialog Box which apparently can perform the same function? I realize that there are restrictions on using the VI Call Configuration Dialog Box, however, if my scenario does

  • Sync rfc vs async rfc

    1)what are the basic designs in IR for Syn RFc and Async RFC.. What could be the diffrence wrt. IR 2) regarding RFC which is imported do we need import/Export or simply Table is sufficient in R/3 Side. Edited by: sapient on Feb 28, 2008 10:03 AM