Cisco Prime 1.3.0.20 Maps

Hello All,
This is to see if I am the only one disappointed with the Mapping portion of Cisco Prime Infrastructure: my disappointments are as follows:
1. The Map can only be zoomed up to a certain size, under WCS and NCS we could almost zoom indefinitely into the map.
2. The edit map sizing tool bit and its working has changed and quite difficult to use, the tool tip has changed into a small square, and uses double click which are not as intuitive as before, why change a working thing?
3. Printing the Map is almost like priting the screen, when you say print you are telling it to print the map and not how it appears on your screen, for there are other tools like snagit or greenshot.
These are serious concerns for my team, are you experiencing this?
Prakash

Very similar issue at least.   The planning tool, which is reliant on the maps, is very difficult to use.  It is very difficult to scale maps for use in the planning tool.  Obviously this is important to calculations and placement of the AP's and also coverage computations.

Similar Messages

  • Network topology map Cisco Prime Infrastructure

    Hi just want to inquire if it is possible to create a network topology map on cisco prime infrastructure's dashboard that will display both wired and wireless devices or do we need another cisco product to accomplish it.
    Thanks

    At long last, Prime Infrastructure 2.2 was released yesterday (17 December 2014) and now includes the Topology map feature:
    "Cisco Prime Infrastructure provides a visual map that allows you to view the physical network topology, including the network devices and the links that connect them. The topology maps have indicators that show the current alarm status of network devices and links. By using the network topology maps, you can easily monitor your network by viewing alarms and viewing the interconnection between the devices." (Link)
    I'm migrating a system now and will open a new thread with first impressions.

  • Cisco Prime 1.2 (MAPS/FLOOR PLANS)

    Hi All,
    Does anyone have any idea on how to import and scale correctly campus, building and floor diagrams into Cisco PI?
    I have tried several times via the editor to rescale and it just doesn't work.
    Any advise would be greatly appreciated.
    Thanks in advance for any replies.
    Jason                  

    Yes you can add building and floor diagrams in Cisco Prime Infrastructure 1.2. For the same you can see the below link
    http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/maps.html
    Open this link and goto Adding Floor Areas to a Campus Building

  • Class Map Statistic Dashlet in Cisco Prime Inf. 2.1

    Dear All , 
    I installed the demo version of Cisco Prime infra . 2.1 and I saw that there is a specific Dashlet to monitor QOS class map . 
    As we have some policy-map configured  , it could be very interresting. 
    After a day spent on Google .. I didn't found how to configure it ..  I found that Cbqos must be enabled on the switch/router 
    So I did it by entering the following cmd 
    snmp-server ifindex persist 
    snmp mib persist cbqos 
    But nothing .  I also deployed the Cisco monitoring template for class map statistics . 
    Do I need another cmd to be entered  or any other device or appliance from Cisco .. ? 
    Thanks a lot 
    Marc 

    PI 1.2 definitely does not include all the regulatory compliance features of LMS. Reference.
    Even though the document says PI 1.2 will do baseline compliance, I haven't figured out how they expect you to do that.

  • Cisco Prime and Maps

    Hi
    When you create a map in Cisco Prime and place the APs, does this effect in any way the RRM configuration on the AP's? or there power\channel selection?
    Or are the maps a purely passive tool?
    Thanks in advance

    RRM operates at the controller level.  Prime maps are passive only and have no impact on RRM.  The maps are more of a visual/graphical tool for heatmaps and planning scenarios.

  • Issue with cisco prime adding aceess point in the map and move in the final position

    I have an Cisco Prime infrastructure with a 2.1.1 version, I created a new campus, a new building, a new floor after that i want to add access point in one floor i can add 4 access ponit but in other one floor I add first 3 access points successful bunt when i try to add a new access point in the same floor tha access point it is added but I can not move it to the final possition on the map.
    the cisco prime shows the followging message
    Cannot find feature by (Mac/Name/ID) null
    how can I move the access point into the last possiton ?

    Duplicate post. 
    Go HERE.

  • Cisco Prime 1.2 - cannot delete "Unassigned" Campus

    Hi,
    has anybody an idea how to delete Unassigned Campus?
    I went through I think all documentation and they are speaking that only "System Campus" cannot be deleted, but not a single word about "Unassigned" campus.
    All the campuses below behaves like a child of Unassigned campus. I know it's just cosmetic issue, but still I would like to get rid of it.
    I attached a screenshot.
    Thanks!
    K.

    Yes you can add building and floor diagrams in Cisco Prime Infrastructure 1.2. For the same you can see the below link
    http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/maps.html
    Open this link and goto Adding Floor Areas to a Campus Building

  • 1600 and 2600 series aps no heatmap on cisco prime 1.4.0.45

    after plotting 1600 series and 2600 series aps on the respective uploaded maps, there's NO heatmap coming out. 
    setup composed of:
    1600 series aps
    2600 series aps
    wlc running HA (7.4.121.0)
    cisco prime 1.4.0.45
    i noticed some errors from prime:
    error 1: Exception while computing Coverage Heatmap. Message: COMMON-1 Try Recompute RF Prediction - this error message shows after positioning the aps on the map and clicking save button. it took sometime to display then this error message shows. 
    error 2: Error in Recompute RF Prediction: SyntaxError:syntax error - this error shows after running recompute rf prediction option
    i tried 802.11a/n and 802.11b/g/n protocols but still no heatmap. i tried unselecting ap heatmaps option and select it again but still no heatmap.
    anybody have an idea what is going on? tia

    Hi,
    Try removing both APs from the map and saving. Next, go back into the map an assign the APs. If they still do not map then I would look at the traps on the controller and make sure that the AP is fine. I would also look at performing an on demand refresh from the controller to the WCS. You can do this from the management page in WCS.

  • Cisco Prime Infrastructure 2.0 - no traps/info are pushed from devices

    Good evening,
    I have setup Cisco Prime Infrastructure 2.0 and,  though I have added manually my 4 network cores as devices without any  problem, I can't get a single trap or a single SNMP information to be  pushed into my Cisco Prime Infra.
    Here is my SNMP config on my core :
    snmp-server user *edited* *edited* v3
    snmp-server  group *edited* v3 noauth notify  *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F
    snmp-server community *edited* RO
    snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
    snmp-server enable traps flowmon
    snmp-server enable traps transceiver all
    snmp-server enable traps call-home message-send-fail server-fail
    snmp-server enable traps tty
    snmp-server enable traps rf
    snmp-server enable traps memory
    snmp-server enable traps cpu_threshold
    snmp-server enable traps eigrp
    snmp-server enable traps ospf state-change
    snmp-server enable traps ospf errors
    snmp-server enable traps ospf retransmit
    snmp-server enable traps ospf lsa
    snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
    snmp-server enable traps ospf cisco-specific state-change shamlink interface
    snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
    snmp-server enable traps ospf cisco-specific errors
    snmp-server enable traps ospf cisco-specific retransmit
    snmp-server enable traps ospf cisco-specific lsa
    snmp-server enable traps flex-links status
    snmp-server enable traps fru-ctrl
    snmp-server enable traps entity
    snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
    snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
    snmp-server enable traps ether-oam
    snmp-server enable traps aaa_server
    snmp-server enable traps flash insertion removal
    snmp-server enable traps l2tc threshold sys-threshold
    snmp-server enable traps power-ethernet police
    snmp-server enable traps rep
    snmp-server enable traps vswitch dual-active vsl
    snmp-server enable traps udld link-fail-rpt status-change
    snmp-server enable traps vtp
    snmp-server enable traps vlancreate
    snmp-server enable traps vlandelete
    snmp-server enable traps auth-framework sec-violation
    snmp-server enable traps dot1x auth-fail-vlan guest-vlan no-auth-fail-vlan no-guest-vlan
    snmp-server enable traps envmon fan shutdown supply temperature status
    snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail
    snmp-server enable traps port-security
    snmp-server enable traps ethernet evc status create delete
    snmp-server enable traps energywise
    snmp-server enable traps ipsla
    snmp-server enable traps vstack
    snmp-server enable traps bfd
    snmp-server enable traps bgp
    snmp-server enable traps bulkstat collection transfer
    snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
    snmp-server enable traps config-copy
    snmp-server enable traps config
    snmp-server enable traps config-ctid
    snmp-server enable traps event-manager
    snmp-server enable traps hsrp
    snmp-server enable traps ipmulticast
    snmp-server enable traps isis
    snmp-server enable traps msdp
    snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
    snmp-server enable traps bridge newroot topologychange
    snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency
    snmp-server enable traps syslog
    snmp-server enable traps isakmp policy add
    snmp-server enable traps isakmp policy delete
    snmp-server enable traps isakmp tunnel start
    snmp-server enable traps isakmp tunnel stop
    snmp-server enable traps ipsec cryptomap add
    snmp-server enable traps ipsec cryptomap delete
    snmp-server enable traps ipsec cryptomap attach
    snmp-server enable traps ipsec cryptomap detach
    snmp-server enable traps ipsec tunnel start
    snmp-server enable traps ipsec tunnel stop
    snmp-server enable traps ipsec too-many-sas
    snmp-server enable traps errdisable
    snmp-server enable traps ethernet cfm alarm
    snmp-server enable traps vlan-membership
    snmp-server enable traps mac-notification change move threshold
    snmp-server enable traps vrfmib vrf-up vrf-down vnet-trunk-up vnet-trunk-down
    snmp-server host *ip-address-edited* version 3 noauth *edited*
    Basically all traps are enabled but absolutely nothing is showing up in my Prime Infra except that my 4 devices are "Reachable".
    Here is a show snmp on the same device :
    sh snmp
    Chassis: *S/N Edited*
    38554534 SNMP packets input
        0 Bad SNMP version errors
        14 Unknown community name
        0 Illegal operation for community name supplied
        0 Encoding errors
        38453185 Number of requested variables
        0 Number of altered variables
        17790703 Get-request PDUs
        20583581 Get-next PDUs
        0 Set-request PDUs
        0 Input queue packet drops (Maximum queue size 1000)
    38490708 SNMP packets output
        0 Too big errors (Maximum packet size 1500)
        0 No such name errors
        0 Bad values errors
        0 General errors
        38371069 Response PDUs
        13 Trap PDUs
    SNMP global trap: enabled
    SNMP agent enabled
    SNMP logging: enabled
        Logging to *edited*, 0/10, 13 sent, 0 dropped.
    Can anyone point out what is wrong or missing in my configuration? I can't seem to single it out myself.
    Thanks
    Jeremy

    Hi Jeremy,
    SNMP traps are shown in the events and alerts section of PI.
    SNMP config looks fine. Can  you run the SNMP debug (debug snmp packets ) .check the logs and see if the device is actually sending the TRAPS to the PI server.
    Thanks-
    Afroz
    [Do rate the useful post]
    ****Ratings Encourages Contributors ****

  • Ask the Expert: Cisco Prime Infrastructure - Implementation and Deployment

    Welcome to the Cisco Support Community Ask the Expert conversation.
    This Ask The expert Session will cover questions spanning Cisco Prime Infrastructure on Implementation and Deployment on Wired and Wireless. This will be more specific to Customer’s and Partners questions product covering PI on configuration, Features and Menu, Network Monitoring, Maps, Implementation, High Availability and Maintenance and t/s parts.
    Monday, February 2nd, 2015 to Friday, February 13th, 2015
    Dhiresh Yadav is a customer support engineer in High-Touch Technical Services (HTTS)  handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco Prime Infrastructure and Cisco Wireless products. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS) and CCIE (DC) certifications.
    Afroz Ahmad is a customer support engineer in High-Touch Technical Services (HTTS)  handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco NMS products like Prime Infrastructure, LMS, IP SLA and SNMP etc. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS),CCIE (DC), and SCJP (Sun Certified Java Professional )
    Vinod Kumar Arya is a customer support engineer in High-Touch Technical Services (HTTS)  handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco NMS products like Prime Infrastructure, LMS, IP SLA and SNMP etc. He has over 8 years of industry experience working with large enterprise and service provider networks. He also holds VCP 5 and RHCE certifications.
    ** Remember to use the rating system to let the experts know you have received an adequate response.**
    Because of the volume expected during this event, the experts might not be able to answer every question. Remember that you can continue the conversation in the Network Infrastructure community, > Network Management, shortly after the event. This event lasts through February 13th 2015. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

    Hello Wilson,
    Thanks for joining us.
    1841 should just work fine for net flow . Hope you have a valid "PI Assurance license" installed on the server.
    "PI Assurance license" is required for "net-flow"  feature
    Devices supporting Netflow in PI ::
    1400, 1600, 1700 & 1800
    2500, 2600 & 2800
    3600, 3700, 3750 & 3800
    4500 & 4700
    AS5300 & 5800
    7200, 7300, 7400 & 7500
    Catalyst 4500 ASCI
    Catalyst 5000, 6500, & 7600 ASCI
    ESR 10000 ASCI
    GSR 12000 ASCI
    Cisco IOS Software Release Version
    Supported Cisco Hardware Platforms
    11.1CA, 11.1CC
    Cisco 7200 and 7500 series, RSP 7200 series
    12.0
    Cisco 1720, 2600, 3600, 4500, 4700, AS5800 
    RSP 7000 and 7200 series
    uBR 7200 and 7500 series
    RSM series
    12.0T, 12.0S
    Cisco 1720, 2600, 3600, 4500, 4700, AS5800 
    RSP 7000 and 7200 series
    uBR 7200 and 7500 series
    RSM series, MGX8800RPM series, and BPx8600 series
    12.0(3)T, 12.0(3)S
    Cisco 1720, 2600, 3600, 4500, 4700, AS5300, AS5800
    RSP 7000 and 7200 series
    uBR 7200 and 7500 series
    RSM series, MGX8800RPM series, and BPx8650 series
    12.0(4)T
    Cisco 1400, 1600, 1720, 2500, 2600, 3600, 4500,
    4700, AS5300, AS5800
    RSP 7000 and 7200 series
    uBR 7200 and 7500 series
    RSM series, MGX8800RPM series, and BPx8650 series
    12.0(4)XE
    Cisco 7100 series
    12.0(6)S
    Cisco 12000 series
    NetFlow is also supported by these devices Cisco 800, 1700, 1800, 2800, 3800, 6500, 7300, 7600, 10000, CRS-1 and these Catalyst series switches: 45xx, 55xx, 6xxx.
    NetFlow export is also supported on other Cisco switches when using a NetFlow Feature Card (NFFC) or NFFC II and the Route Switch Module (RSM), or Route Switch Feature Card (RSFC). However, check whether version 5 is supported, as most switches export version 7 by default.
    You can check the below steps to diagnose the issue::
     To verify that NetFlow is exported from a device to PI, follow the steps below:
    1)    Browse to Administration > Data Sources page. Check the value in column ‘Last Active Time’  for the ‘Device Data Sources’ table. If the table is empty or  the value does not represent recent time, then
    it is possible that the device is not exporting NetFlow or PI Assurance license is not applied / expired.
    2)    Login to PI console ( via SSH) as root user and run the command:
                    netstat –an | grep 9991 – Output of this should be like :  udp        0      0 :::9991         :::*
                    Check the firewall settings on PI server using the command: firewall -L
    1)    Check the configuration on an IOS / IOS –XE device. Run the commands
    a)    sh running-config | inc destination
    1)    This should list the IP address of the PI SERVER ( along with other outputs if any)
    b)    sh running-config | inc 9991
    1)    This should list at least one entry.
    c)    If the above are fine, then verify that the flow monitor, flow exporter and the flow records are correctly configured on the device.
    Refer to the URLs below to configure NetFlow export.
    http://preview.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/user/guide/setup_monitor.html#wp1056427
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Cisco Prime Infrastructure MESH LINK ISSUE

    Hi,
    a Customer of us has a trouble with cisco Prime Infrastructure 1.2.0.12 and AP mesh link.
    There is an huge database ( i suppose the issue can be here ) and when we display some map ( each floor has about 6 RAP and 24 MAP ) we cannot see the MESH information and link draw.
    The only way to dipley them is to disable "refresh from network": this way I'm able to show these link..... until a click before.
    What i noticied when all was working fine, after i click to some floor:
    1) the software started to show the map with normal color and no mesh info displayed ( just ap and coverage cloud )
    2) after few time ( less than 1 second ) the map was becoming a little bit lighter and the mesh info was merged to the map
    We are missini the second step
    Anyone had the same issue ?
    best regards
    Luigi
    PS: I opened a case with WCS version 6.0 ( same issue ) but, after some months, no risult. The last version working fine was WCS 5.2

    Just to add some more informations:
    - disabling "refreshj from network" ( building properties ) the link and mesh info are showed
    - while I'm on a floor, after some refresh, i loose the mesh link draw and, if i click on an AP, i loose also mesh info in the popup. It' s like, after some refresh, the AP are no more recognized as Mesh ( !?!? )
    regards
    Luigi

  • Cisco Prime Infrastructure 1.3 to 2.1

    I have a Cisco Prime Infrastructure version 1.3 virtual appliance and we have a new Prime Infrastructure version 2.1 virtual appliance set up. I would like to get the wireless information put into the new server. This includes the WLC and APs and then the campus maps and the location of each AP on the map Im not sure if the heat mapping is a feature of Prime or if I have to set that up too. But I would like the heat maps.
    What would be the easiest way todo this?

    Are you logged in with a cisco.com (CCO ) userid? I just checked it and it works fine for me.
    You can navigate down to it via:
    HOME
    SUPPORT
    PRODUCT SUPPORT
    CLOUD AND SYSTEMS MANAGEMENT
    CISCO PRIME INFRASTRUCTURE
    INSTALL AND UPGRADE
    INSTALL AND UPGRADE GUIDESCisco Prime Infrastructure 2.1 Quick Start Guide

  • Cisco Prime Infrastructure 1.2

    Hello,
    I have some maps of our building in PDF format and i want to load them on the cisco prime infrastructure 1.2, could you tell me how?
    FYI: i opened : Design tab => Site maps Design but after this i don't know if i have to create a group or no;
    Thanks

    Thanks, i done it.
    I have a problem to fill out some information in the New Floor Area tab:
    our building has 1 basement and a ground floor and 3 floors, may I consider the ground floor as a the first floor because i have to fill out Number of floors on the edit building tab then i have to put 4 floors otherwise in the new floor area i'll have only 3 floors on the drop down list. (and the last floor will not has an id floor)
    and the problem is
    ground floor has floor id 1
    1st floor has floor id 2 ......
    have you any suggestion?

  • Cisco Prime Infrastructure 2.1 Express OVA failing to boot up

    Hi all, i'm wondering if you can help me, i'm trying to deploy Cisco Prime Infrastructure in a lab envrionment but it's not working correctly.
    I've deployed "PI-VA-2.1.0.0.87-Express.ova" to a VMware ESXI 5.1U2 hypervisor with 2x AMD 8128HE CPUs, 96GB RAM, ASUS KGPE-D16 motherboard. The installation works fine, I can answer all the questions and enter the IP address. Once the system reboots, it hangs at the following screen:
    "Kernel direct mapping tables up to 340000000 @ 10000-1c000" is the last thing I see
    Interestingly at this point I can actually ping the VM... I cant connect to the managemnet console on HTTPS though :(
    I did find some related info on a blog https://deekayen.net/kernel-alive-lock which mentions booting with "noapic", however when I try to press "P" on the grub boot loader it prompts me to enter a password which I dont know! My normal admin passwords arent working.
    Any help to ge tthis running would be greatly appreciated
    Thanks in advance
    Ben

    The server takes about 30 mins to boot up, it's not actually broken it's just extremely slow .. I have found numerous people reporting this issue online, and our production system also does this! I guess my original problem is solved, although I would prefer this issue not to exist!

  • Cisco Prime 1.2 Licensing question

    Hi all,
    I am try to design a wireless solution where we will use WLC, MSE, ACS and we want to hace map location of the ap.
    It is a new solution, no a upgrading
    For the use of map and location in Cisco Prime wich license is required?, just with the lifecycle can i do?
    This solution is for a 120 ap´s, i list the license what i think that i need
    R-PI12-K9
    R-PI12-BASE-K9
    L-PI12-LF-100
    L-PI12-LF-50
    I hope be clear
    Regards,
    Sebastian

    I beleive that with life cycle you should be able to do maps, although you will obviously need a base as well.
    Also, I don't beleive that you can get ACS anymore, so you will be looking at ISE instead.

Maybe you are looking for

  • How do I Get My Router to Work With iChat ? FAQ 2

    Replaces iCh: FAQ 2 How to get my router to work with iChat? Getting your router started with iChat. Appropriate for using iChatAV 2 upwards Glossary for this FAQ Routers: Any configurable device that sits between your computer and the internet link

  • Mac mini only logs on to guest

    I seem to have lost my admin account access....when I boot up, all I get is the guest account access. How do I get my admin account back?

  • Font Licensing Restriction Issue

    I recently transferred a lot of ttf and otf fonts (originally purchased for and used on a Windows NT machine) to Mac Book Pro. When I try to use the fonts in Abode CS5.5 (In illustrator) I'm told I need a license. Won't let me embed the fonts, for ex

  • Acrobat Pro XI goes to trial mode and signing in fails when printing (in not Adobe programme)

    I'm from Finland and when I joined Creative Cloud, I soon found out that Creative Cloud signing in doesn't work in Finnish even though it is possible to install some programmes in Finnish. So I uninstalled everything and installed all the programmes

  • Logic Express 9 not saving transport bar settings

    I changed my transport settings by adding buttings and clicked the 'save as default' button, but the the settings do not stay when I quit logic and reopen the project file.