Cisco Prime 1.3 and email alerts

I want to create some basic alarms on our infrastructure. I want to monitor only specific ports on specific switches. I do not want to monitor client ports, only uplinks to distribution/core and server ports. Is it possible to get alerts only from specific ports from specific switches ? If it is can you please tell me where exactly I have to look in the documentation of the PI.
Predrag Petrovic

Hi,
as far as I know, this is not possible.
We configured our core switches to send link-up-down events as traps to PI. With this configuration, we got alarms only for link-up-down events on our core switches. We could not restrict it to specific ports, but this worked for us.
Timo

Similar Messages

Ask the Expert: Overview of Cisco Prime Service Catalog and Process Orchestrator Solutions

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco Prime Service Catalog and Process Orchestrator solutions.
Cisco expert Jason Davis will discuss Cisco’s network management products offered under the Cisco Prime framework. If you have questions about Cisco Prime infrastructure or data center automation with our Cisco Prime Service Catalog and Process Orchestrator solutions, join us on the Cisco Support Community.
Jason Davis is a distinguished services engineer in the Intelligent Infrastructure Practice team of Cisco Advanced Services. His role is to provide strategic and tactical consulting for hundreds of Advanced Services customers, lead service innovation, and assess new services and technologies. Jason's primary expertise areas are in network management systems, intelligent automation, virtualization, data center operations, software-defined networking, and network programmability.
Based out of the Research Triangle Park (RTP) campus, Jason is also responsible for administering the Research Triangle Park Network Management Lab, Cisco's largest network management lab.
Since joining Cisco in 1998, Jason has been a frequent speaker at Cisco's Networkers and CiscoLive conferences in the United States and Europe. In the past five years he has also been involved in the conference network setup and monitoring. He is a much sought-after resource by the field sales teams to assist with presales solutions and executive briefings. He has provided strategic and tactical network management consulting for several hundred customers.
Jason is a subject matter expert with the following products and features:
Cisco Prime LAN management solution
Cisco Prime infrastructure
CiscoSecure ACS
Cisco Prime Network Registrar
Cisco Process Orchestrator
Cisco Prime Service Catalog
Cisco IP SLA
Embedded Event Manager
SNMPv3
onePK and OpenFlow
Cisco UCS
Device instrumentation
VMware ESX, ESXi, and vCenter
ITIL
Jason received his bachelor of science degree in electrical engineering from the University of Miami (FL). He has been married for 20 years and has 4 children. His interests include providing audiovisual technical support for churches and conference venues, camping and biking with his family, remote-control helicopter piloting, paintball, and recreational shooting.
Remember to use the rating system to let Jason know if you have received an adequate response.
Because of the volume expected during this event, Jason might not be able to answer every question. Remember that you can continue the conversation in Data Center > Intelligent Automation under the subcommunity Cisco Prime Service Catalog shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Jason,
Thank you very much for welcoming me to your expert discussion :) I feel to be in the right place, at the right time. Thank you also for answering question beyond your scope here, much appreciated. The information received will help me to go further as such I have submitted a 5 start rating for your first reply.
That sounds promising about the LMS part so yes, I stay tuned and wait patiently.
Ok, now let’s revert to the actual topic discussed here. Cisco Prime Service Catalog and Process Orchestrator solutions I have briefly read up on this on CCO (where elseJ) and picked out the following quote
---- Quote from the Cisco Prime Service Catalog Data Sheet
Today’s end users want self-service and easy access to IT tools and services.
Simultaneously, organizations are seeking ways to extend their cloud management
platforms beyond self-service delivery of virtual machines and infrastructure resources
while increasing their use of cloud-based solutions to enhance business agility and effectiveness.
Cisco Prime™ Service Catalog offers tremendous benefits to organizations that want to unify the ways in
which all types of IT services are ordered and fulfilled, not just infrastructure requests
---- un quote ---
I try to understand what (at high level of course) happens in the back ground when an order is raised and which vendor solution your product can interact with.
As mentioned in the quoted text, this service catalogue goes beyond the standard infrastructure.
Let’s say, a user wants to deploy a new email services, or in your example, extends or create a new web-portal (i.e. for HR to view and manage holiday, staff absence and benefits).
Your solution will need to interact somehow with the 3rd party vendor application that is capable building such portal I believe.
Without disclosing to many information, I assume the portal is linked to backend VM,s that spin up requested resources (and more magic of course). Perhaps I am mixing this up with another cisco product where a user can go on the portal and spin up virtual Firewalls, virtual Routers can be provisioned in now time.
Out if interest; Is this product also known as Mozart? (project code within Cisco?)
I hope query is ok.
Best wishes
Markus

How to set alert threshold and email alerts?

Hi!
I have configured Solution manager 3.2 to monitor
our R/3 systems.
I want to be able to set the threshold for tablespace
usage and be able to send an email if the usage
of the tablespace is 80% full.
Could anybody tell how to implement it?
Thanks!

Hi Christy:
There are different approaches to configure alerts, if you are using Solution Manager; I think you can benefit if you choose SolMan and the Central System (CEN) to handle all the monitoring and email alerting.
If this is the case, you will need to install the CCMS Agents on every satellite system in order to trigger remote alerts.
Let me know what is your idea and I can follow with you with the required steps.
Best Regards,
Federico G. Babelis
NetWeaver Certified Consultant
GAZUM Technologies S.A.
Consulting Services and Software Solutions
http://www.gazum.com
...download FREE Marketplace Manager at: http://www.gazum.com/products

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

For each mail account, along with designating a primary SMTP server, you should be able to just turn off any and all other SMTP servers you have listed. In that case, if there is a problem with comcast, the message send should just fail.
Also make sure your comcast smtp settings are correct (port, likely 587 but might be something else for comcast, whether you should be suing SSL or not, do you need authentication or not).
You might find the comcast forums useful for getting the settings right - I found this:
http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/iphone-email/m-p/66 1151?view=by_date_ascending#M131151
The second poster notes, SSL should be on, authentication should be "password" and you should be using port 995

IPhone 5 iOS 8.1. Message and email alerts don't work. Help!

Message and email alerts are not working. Vibration working fine. Alerts also produce vibration. I've seen a number of similar posts. Thanks!

OK. Called my service provider today. Apparently razmee209 was right. Bell/Virgin network is experiencing LTE problems since September and it affects random people all LTE phones. They said they are working on it. And the solution for now is to turn LTE off and keep the phone on 3G network.
Hopefully it will be fixed soon.

Why have my purchased text and email alerts vanished?

II'm not connected to I tunes and have purchased 2text alerts and email alerts. After assigning them, they disappear. Where are they?

Thanks for the reply. It was after the upgrade. I brought the same alerts again afterwards (it knew I had already purchased them and asked me if I wanted to buy them again). I did but within a day, they had vanished again! Be careful not to buy them again until Apple sort this costly issue out!! They now owe me money!!!!

Cisco Prime Infrastructure 2.2 Email frequency (alert reminders)

Hi,
We have deployed a Cisco PI 2.2 and are able to receive emails when alerts are generated in the network, but emails are ony sent once. Is there any way to set the email frequency for alerts? In the case an alert hasn't been cleared in a certain period, to have the PI send another alert notification.
Thanks.

Have you found a solution to this issue? We are having the same issue at our location.

Prime Infrastructure 2.0 - Email alert when device is unreachable

Is there a way for PI to send email alerts when a device becomes unreachable? I know there are alerts when an interface goes down, but I can't find how to get prime to alert me ONLY when a device becomes unreachable.
Does anyone know how to do this? I can't believe such a simple feature would be so difficult to configure...

PI also generates an event when it finds unreachable device. An event is an occurrence or detection of some condition in or around the network. An event is a distinct incident that occurs at a specific point in time. Examples of events include:
Port status change
Device reset
Device becomes unreachable by the management station
You can view the list of events using the Event Browser.
Choose Operate > Alarms & Events , then click Events to access the Events Browser page.
Prime Infrastructure discovers events by automatically polling devices and discovering changes; for example, device unreachable.
For more details on Events, please check here :
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/user/guide/prime_infra_ug/alarms.html#pgfId-1054357
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

Ask the Expert: Cisco Prime Infrastructure - Implementation and Deployment

Welcome to the Cisco Support Community Ask the Expert conversation.
This Ask The expert Session will cover questions spanning Cisco Prime Infrastructure on Implementation and Deployment on Wired and Wireless. This will be more specific to Customer’s and Partners questions product covering PI on configuration, Features and Menu, Network Monitoring, Maps, Implementation, High Availability and Maintenance and t/s parts.
Monday, February 2nd, 2015 to Friday, February 13th, 2015
Dhiresh Yadav is a customer support engineer in High-Touch Technical Services (HTTS) handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco Prime Infrastructure and Cisco Wireless products. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS) and CCIE (DC) certifications.
Afroz Ahmad is a customer support engineer in High-Touch Technical Services (HTTS) handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco NMS products like Prime Infrastructure, LMS, IP SLA and SNMP etc. He has over 7 years of industry experience working with large enterprise and service provider networks. He also holds CCNP (RS),CCIE (DC), and SCJP (Sun Certified Java Professional )
Vinod Kumar Arya is a customer support engineer in High-Touch Technical Services (HTTS) handling supporting Wireless and Network Management based Cisco products and is based in Bangalore. His areas of expertise include Cisco NMS products like Prime Infrastructure, LMS, IP SLA and SNMP etc. He has over 8 years of industry experience working with large enterprise and service provider networks. He also holds VCP 5 and RHCE certifications.
** Remember to use the rating system to let the experts know you have received an adequate response.**
Because of the volume expected during this event, the experts might not be able to answer every question. Remember that you can continue the conversation in the Network Infrastructure community, > Network Management, shortly after the event. This event lasts through February 13th 2015. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

Hello Wilson,
Thanks for joining us.
1841 should just work fine for net flow . Hope you have a valid "PI Assurance license" installed on the server.
"PI Assurance license" is required for "net-flow" feature
Devices supporting Netflow in PI ::
1400, 1600, 1700 & 1800
2500, 2600 & 2800
3600, 3700, 3750 & 3800
4500 & 4700
AS5300 & 5800
7200, 7300, 7400 & 7500
Catalyst 4500 ASCI
Catalyst 5000, 6500, & 7600 ASCI
ESR 10000 ASCI
GSR 12000 ASCI
Cisco IOS Software Release Version
Supported Cisco Hardware Platforms
11.1CA, 11.1CC
Cisco 7200 and 7500 series, RSP 7200 series
12.0
Cisco 1720, 2600, 3600, 4500, 4700, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series
12.0T, 12.0S
Cisco 1720, 2600, 3600, 4500, 4700, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series, MGX8800RPM series, and BPx8600 series
12.0(3)T, 12.0(3)S
Cisco 1720, 2600, 3600, 4500, 4700, AS5300, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series, MGX8800RPM series, and BPx8650 series
12.0(4)T
Cisco 1400, 1600, 1720, 2500, 2600, 3600, 4500,
4700, AS5300, AS5800
RSP 7000 and 7200 series
uBR 7200 and 7500 series
RSM series, MGX8800RPM series, and BPx8650 series
12.0(4)XE
Cisco 7100 series
12.0(6)S
Cisco 12000 series
NetFlow is also supported by these devices Cisco 800, 1700, 1800, 2800, 3800, 6500, 7300, 7600, 10000, CRS-1 and these Catalyst series switches: 45xx, 55xx, 6xxx.
NetFlow export is also supported on other Cisco switches when using a NetFlow Feature Card (NFFC) or NFFC II and the Route Switch Module (RSM), or Route Switch Feature Card (RSFC). However, check whether version 5 is supported, as most switches export version 7 by default.
You can check the below steps to diagnose the issue::
To verify that NetFlow is exported from a device to PI, follow the steps below:
1)   Browse to Administration > Data Sources page. Check the value in column ‘Last Active Time’ for the ‘Device Data Sources’ table. If the table is empty or the value does not represent recent time, then
it is possible that the device is not exporting NetFlow or PI Assurance license is not applied / expired.
2)   Login to PI console ( via SSH) as root user and run the command:
                netstat –an | grep 9991 – Output of this should be like : udp        0      0 :::9991         :::*
                Check the firewall settings on PI server using the command: firewall -L
1)   Check the configuration on an IOS / IOS –XE device. Run the commands
a)   sh running-config | inc destination
1)   This should list the IP address of the PI SERVER ( along with other outputs if any)
b)   sh running-config | inc 9991
1)   This should list at least one entry.
c)   If the above are fine, then verify that the flow monitor, flow exporter and the flow records are correctly configured on the device.
Refer to the URLs below to configure NetFlow export.
http://preview.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/user/guide/setup_monitor.html#wp1056427
Thanks-
Afroz
***Ratings Encourages Contributors ****

What is the difference in the features between Cisco prime 1.2 and Cisco prime 1.4 ?

Dears,
Please i need to know what is the difference in the features between Cisco prime infrastructure 1.2 and Cisco prime 1.4.
Already i see the release note for each one but the release indicate only the New feature for every one. so i need to know the difference between them not new features.
Wait your kind feedback plz
Regards,

Hi,
New Features and Enhancements
The following topics describe new features and enhancements in Cisco Prime Infrastructure 1.4.
Management Support for WLC Release 7.5
Support for 802.11ac Module
Support for Cisco AP 700
Policy Classification Engine
FlexConnect Audit Support
Autonomous AP Support
Client Stateful Switchover
Cable Modem Monitoring
Support for Secure File Transfer Protocol
and please go through the link and check the data sheet for further clearance.
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/datasheet-c78-729879.html

Cisco Prime 1.2 and image management

Does Cisco Prime 1.2 have the ability to work with image management? I was told yes but I do not see the options and I have verified I have the correct license...

Hi,
Go to Operate > Device work Center > software Image Management
check the below link:
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/user/guide/maint_images.html
Thanks-
Afroz
[Do rate the useful post]

WRVS4400N - Logging and Email Alerts when I use a VPN client - Firmware bug?

Hi folks -
I've got a problem with my WRVS4400N that has been dogging me for a long time now, and I'm finally fed up with the email alerts.
My wife has a VPN client for her work, on her laptop. It is nothing fancy, normal IPSec VPN, details on it I can get if needed, but it's just VPN.
My WRVS4400N is running 1.1.03 firmware, latest on the site. I have all VPN pass-throughs enabled. VPN connectivity for the wife works great, no problems that I'm aware of for her functionally.
The problem is, that I have logging turned on with email alerts. When my wife uses her VPN connection, I get flooded with alerts from the router with all sorts of goobly goo information. It's almost like there is a bug in the router firmware that is parsing information incorrectly.
Log levels are set to 0,1,2,3. Email alerts enabled. DoS threshold is 50, Log Queue is 100, Log Time is 60. SMTP information for my mail server populated of course, and Local Log enabled.
Below is a sample of the email body that gets sent. My wife has been using her VPN connection for about 3 hours tonight, and already I've been flooded with over 1000 emails.
Here's some body content:
Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN05 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN07 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENv8 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENW9 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN20 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN43 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENb CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN=CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=w GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136 Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136
Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 7
Does anyone have any ideas? This seems like a code bug to me, but how do I go about reporting to Linksys?
Of course, I can turn off email alerts, but then that defeats the purpose of the router being able to tell me when something is awry.
Any help would be appreciated!
Thanks,
Jesse T.

hay,
Nobody can test this?
nobody has a 5520?

Cisco Prime 2.0 and monitoring FWSM transparent context

Hi All,
We have FWSM and ASASM configured in mixed mode (routed and transparent) In transparent mode, there is no IP address linked to the interface.
Cisco Prime save just the admin context, not the global context and other context.
My question is: how to save multiple context using Cisco Prime when context are configured in transparent mode? .
Rgds
Silvere

Omer,
"You can schedule when Prime Infrastructure collects the configurations of selected devices and specify recurring collections by choosing Operate > Configuration Archives , then clicking Schedule Archive ."
The quote is from the User Guide.
Hope this helps.

CC4.0 - Management report and email alerts

Greetings-
1. In Abap based CC4.0, Managemnet Report tab is not showing any result.
2. Email alerts are not reaching out to monitors email id.
CC cockpit's config for enabling these looks ok. Pls suggest wat are the steps(and how to) required outside cc cockpit in this regard.
Would appreciate your quick response.

2. Email alerts are not reaching out to monitors email id.
Did you check with your basis guy on SMTP server configuration in ABAP client (tcode SCOT)?
Thanks
Himadama

Prime Infrastructure 2.0 email alerts with hostname?

I have configured email alerts however in the message it shows up with the IP address instead of hostname.
Is there a way to configure the hostname to be added? Custom text or adding the switch differently (added by direct IP search)?
Thanks,
Chris

I see now, this is a poor carry over from NCS. The option that says include "controller" in email does provide the switch hostname. Hopefully by version 3.0 they will have all the wireless naming fixed when it applies to converged.
Thanks Rob!

Cisco Prime 1.3 and email alerts

Similar Messages

Maybe you are looking for