Cisco Prime 2.0 - CLI credential
Hi PI Experts,
Is CLI credential mandatory on Cisco Prime?
What would happen if no dedicated CLI credential were configured on Prime to access Cisco network devices?
Right now we use TACACS+ to login to Cisco switches and routers and use Radius to login to PI.
However, our security policy prevents us from either creating a AD account on AD servers or creating a local TACACS+ user account on ACS server for PI appliance.
So, when we do device discovery, if we want to use SSH/Telnet, we need to put in our own AD user credentials, then remove them after the discovery is done.
Thanks
Cedar
Hi Ceder,
What would happen if no dedicated CLI credential were configured on Prime to access Cisco network devices?
why Telenet credentilas are required :
Telnet Credential
you can specify the Telnet credentials during discovery so that Prime Infrastructure can collect the device configurations and fully manage the devices. If you do not specify Telnet credentials in the discovery settings, Prime Infrastructure discovers the devices but is unable to manage the device until you specify the Telnet credentials.
In case you are using SSH on your devices:
SSH Credential
For full device support via SSH, you must use SSHv2 with a 1024 bit key. You can configure SSH before running discovery.
Telnet\SSH , credentilas would be required later on as well to Fetch the config , to push any template on the device etc..
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****
Similar Messages
-
Cisco Prime 2.1 CLI-Template for Switch configuration Backup
Hello everybody,
I am trying to write a CLI Template in cisco Prime to save the running-configuration of our core switch to the FTP server,
I have already configured the FTP username and Password in the core Switch
ip ftp username cisco
ip ftp password cisco123
in Cisco Prime I have created a template as follow:
copy running-config ftp:
$FTP_IP_addrress >> the FTP Server
$name >> the name of file and the date
After deploying this template on the core switch,
I received Error Msg in Prime as follow:
Error : Command returned an error : copy running-config ftp: 172.16.30.30 Run_Config_Core_19_2_2015 ^ % Invalid input detected at '^' marker. QAF-DC-4507-CORE(config)#
I know that the backup files can be fetched directly from Cisco Prime in the Configuration Archives, But also I need to test if we can take a backup directly to the FTP server using Prime.
Thanks in advance.Thank you Bkennedy for replying,
I changed my template to be as follow:
#MODE_ENABLE
copy running-config ftp:
$Mgmt_IP_addrress
$name
#MODE_END_ENABLE
but still I am receiving Error like :
Error : Exception while sending interactive commands to device, Expect timeout: Failed to match expected device output due to Expect timeout current timeout 60000. Current output : Address or name of remote host []? Current expects : (DC-450.{0,30}|DC-4507-AGG)\([^\)]+\)#\s*\z DC-4507-AGG#
I believe that we have to tell the Prime how to send the variables to Switch, because the switch is waiting for the remote host IP address and the destination file name???
DC-4507-AGG#copy running-config ftp:
Address or name of remote host []? X.Y.Z.W
Destination filename [dc-4507-agg-confg]?
% VRF table-id 0 not active
% VRF table-id 0 not active
Writing dc-4507-agg-confg !
24425 bytes copied in 1.500 secs (16283 bytes/sec)
DC-4507-AGG# -
Cisco prime 2.2.0 "Telnet/SSH : Unreachable"
Hi,
I've installed the Cisco Prime 2.2.0 OVA (VMware) and ran discovery with a Credential Profile.
some of the device has discovered with complete state and some with Partial Collection Failure state.
when trying to edit the device (under network inventory) and verify credentials i'm getting the above error "Telnet/SSH : Unreachable", but when SSH from the Cisco Prime CLI with the same credentials all works just fine.
%SSH-5-SSH2_SESSION: SSH2 Session request from X.X.X.X (tty = 1) using crypto cipher '', hmac '' Failed
please help...
10x
EyalHi Afroz,
All of my net devices use AAA for login.
I'm using credentials profile to discover my devices and some of them has discovered as they should and some of them are partialy discover with the Cisco Prime log it with CLI/ssh issue.
But when I'm SSH to the partialy discovered device via the Cisco Prime CLI with the same credentials as configured at the credential profile, I'm able to login with no issue.
Please note - while I'm editing the partialy discovered device and testing the credential via the Prime GUI, it display the error message "Telnet/SSH : Unreachable" - and the device log meeage is %SSH-5-SSH2_SESSION: SSH2 Session request from X.X.X.X (tty = 1) using crypto cipher '', hmac '' Failed.
What does it mean?
10x
Eyal -
Cisco Prime 2.1 Backup Device Configuration
Hi
Does anybody knows how I can change the credential of a group of devices to archive all the running configuration?
And other question is where this configuration is stored?
Thanks for your help
regardsThe Bulk update option has been started with PI 2.0.
You can either streamline or change the information on the devices, or if you have another set of credentials for a different subnet, you could add that to the CLI section of the discovery profile and rerun the discovery. If you have a handful of changes, you can click the devices with a status of Managed with Warning and then click the Edit button to modify the credentials.
With Cisco Prime Infrastructure 2.0, there is now an ability to export devices with credentials directly from the GUI. Navigate to Operate > Device Work Center and you should be able to see the “Export Device” button as shown in following figure:
At that point in time, you can export the device credentials, change them using a spreadsheet application, and import them back.
TIP: If you need to change the credentials for devices in bulk, this method can be used to do that.
Importing Devices Manually
If you maintain a spreadsheet that has all the devices and would rather get started with that, you do have this option in Cisco Prime Infrastructure 2.0. If you to go Operate > Device Work Center > Bulk Import, you get an import pop-up as shown in the figure below:
The configuration is stored in the oracle DB in various table and indexes. Unfortunately, it doesnt allows to see that configuration from the server directory. But you can manage and view from CPI GUI.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
Cisco Prime Collaboration backup doesn´t work
Hi I am trying to create a FTP backup with Cisco Prime Collaboration Version 9.5.34267
I set a backup job in the GUI. I attached the config via screenshot. The Prime contacts the ftp server (test in backup job was fine) and after loggin in it quits...
This is the log of the Filezilla FTP:
(000013)23.10.2014 15:08:26 - (not logged in) (10.48.207.85)> Connected on port 21, sending welcome message...
(000013)23.10.2014 15:08:26 - (not logged in) (10.48.207.85)> 220-FileZilla Server version 0.9.47 beta
(000013)23.10.2014 15:08:26 - (not logged in) (10.48.207.85)> 220-written by Tim Kosse ([email protected])
(000013)23.10.2014 15:08:26 - (not logged in) (10.48.207.85)> 220 Please visit https://filezilla-project.org/
(000013)23.10.2014 15:08:26 - (not logged in) (10.48.207.85)> USER test
(000013)23.10.2014 15:08:26 - (not logged in) (10.48.207.85)> 331 Password required for test
(000013)23.10.2014 15:08:26 - (not logged in) (10.48.207.85)> PASS ****
(000013)23.10.2014 15:08:26 - test (10.48.207.85)> 230 Logged on
(000013)23.10.2014 15:08:26 - test (10.48.207.85)> QUIT
(000013)23.10.2014 15:08:26 - test (10.48.207.85)> 221 Goodbye
(000013)23.10.2014 15:08:26 - test (10.48.207.85)> disconnected.
(000014)23.10.2014 15:12:47 - (not logged in) (10.48.207.85)> Connected on port 21, sending welcome message...
(000014)23.10.2014 15:12:47 - (not logged in) (10.48.207.85)> 220-FileZilla Server version 0.9.47 beta
(000014)23.10.2014 15:12:47 - (not logged in) (10.48.207.85)> 220-written by Tim Kosse ([email protected])
(000014)23.10.2014 15:12:47 - (not logged in) (10.48.207.85)> 220 Please visit https://filezilla-project.org/
(000014)23.10.2014 15:12:47 - (not logged in) (10.48.207.85)> USER test
(000014)23.10.2014 15:12:47 - (not logged in) (10.48.207.85)> 331 Password required for test
(000014)23.10.2014 15:12:47 - (not logged in) (10.48.207.85)> PASS ****
(000014)23.10.2014 15:12:47 - test (10.48.207.85)> 230 Logged on
(000014)23.10.2014 15:12:47 - test (10.48.207.85)> DELE /temp/transfer/assurance_Thu_Oct_23_15_08_25_CEST_2014.tar.gpg
(000014)23.10.2014 15:12:47 - test (10.48.207.85)> 550 File not found
(000014)23.10.2014 15:12:47 - test (10.48.207.85)> QUIT
(000014)23.10.2014 15:12:47 - test (10.48.207.85)> 221 Goodbye
(000014)23.10.2014 15:12:47 - test (10.48.207.85)> disconnected.
Where is the problem? Target path is c:\temp\transfer
Many thanksThis is my command:
Enter configuration commands, one per line. End with CNTL/Z.
PFM1EU-TEL70/admin(config)# repository PrimeBackupNew
PFM1EU-TEL70/admin(config-Repository)# url sftp://10.48.67.24
PFM1EU-TEL70/admin(config-Repository)# user test password plain test
PFM1EU-TEL70/admin(config-Repository)# exit
PFM1EU-TEL70/admin(config)# exit
PFM1EU-TEL70/admin# backup prime repository PrimeBackupNew application cpcm
% Creating backup with timestamped filename: prime-141024-1022.tar.gpg
arg0=/opt/emms/emsam/bin/cpcmbackup.sh, arg1=/opt/backup/backup-prime-141024-1022-1414138960/backup/appcomponent, arg2=, arg3=
Export: Release 11.2.0.2.0 - Production on Fri Oct 24 10:22:42 2014
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8MSWIN1252 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user CMUSER
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user CMUSER
About to export CMUSER's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export CMUSER's tables via Conventional Path ...
. . exporting table ACLAPPLIEDTOPEP 0 rows exported
. . exporting table ALARM 0 rows exported
. . exporting table ALARMNOTE 0 rows exported
. . exporting table ALARMSET 2 rows exported
. . exporting table ALARMSETCODEMAPPING 253 rows exported
. . exporting table APPLICATIONVERSION 0 rows exported
. . exporting table APPLICATIONVERSIONHISTORY 0 rows exported
. . exporting table ASSURANCEDOMAIN 5 rows exported
. . exporting table AUDITLOG 0 rows exported
. . exporting table AUTHORITIES 29 rows exported
. . exporting table AUTH_PROVIDER_CONFIG 0 rows exported
. . exporting table BASEENTITY 3442 rows exported
. . exporting table BASEENTITY_PROPS 7546 rows exported
. . exporting table BGPADJACENCY 0 rows exported
. . exporting table BGPNEIGHBORSTATEINFO 0 rows exported
. . exporting table BGPPROCESSSETTINGS 0 rows exported
. . exporting table CALLDETAILRECORD 0 rows exported
. . exporting table CALLQUALITYRCARESULT 0 rows exported
. . exporting table CALLQUALITYRCARUN 0 rows exported
. . exporting table CALLQUALITYRCASTATUS 0 rows exported
. . exporting table CALLQUALITYRCATEST 25 rows exported
. . exporting table CAMERA 0 rows exported
. . exporting table CDPNEIGHBORINFO 0 rows exported
. . exporting table CHRCTRSTCS10_PROTOCOLNAME 0 rows exported
. . exporting table CHRCTRSTCS7_DSTADDRESS 0 rows exported
. . exporting table CHRCTRSTCS7_PSSNGRPRTCL 0 rows exported
. . exporting table CHRCTRSTCS7_SRCADDRESS 0 rows exported
. . exporting table CMBACKUPSETTINGS 4 rows exported
. . exporting table CMCLSTR 0 rows exported
. . exporting table CMCOMPOSITEREPORTS 0 rows exported
. . exporting table CMCOMPOSITEREPORTS_PROPS 0 rows exported
. . exporting table CMCTXROUTE 0 rows exported
. . exporting table CMDEVICE 3442 rows exported
. . exporting table CMDEVICEREGIONMAPPING 0 rows exported
. . exporting table CMJOB 0 rows exported
. . exporting table CMJOBITEM 0 rows exported
. . exporting table CMJOBPROGRESS 0 rows exported
. . exporting table CMJOBRESULT 0 rows exported
. . exporting table CMJOBSPECPROGRESS 60 rows exported
. . exporting table CMLINK 0 rows exported
. . exporting table CMPATH 0 rows exported
. . exporting table CMPATHHOPS 0 rows exported
. . exporting table CMPNDCNDTNHSPLCYCNDTNS 0 rows exported
. . exporting table CMREGION 0 rows exported
. . exporting table CMREPORTSETTINGS 8 rows exported
. . exporting table CMRESOURCEGROUP 0 rows exported
. . exporting table CMROUTERSWITCHINFO 0 rows exported
. . exporting table CMSERVICEPROVIDER 0 rows exported
. . exporting table CMSIMPLEREPORTSETTINGS 0 rows exported
. . exporting table CMSIMPLEREPORTSETTINGS_PROPS 0 rows exported
. . exporting table CNEXPOSESPEPS 0 rows exported
. . exporting table CNHASINTERNALPEPS 0 rows exported
. . exporting table COMMSERVERCLUSTER 0 rows exported
. . exporting table COMMUNICATIONSSERVER 3 rows exported
. . exporting table COMPOUNDACTIONHASPOLICYACTIONS 0 rows exported
. . exporting table CONFIG_OBJECT_TRACKER 0 rows exported
. . exporting table CONNECTIVITYNETWORK 0 rows exported
. . exporting table CONNECTIVITYNETWORKHASFRS 0 rows exported
. . exporting table CONTACTDETAILS 0 rows exported
. . exporting table CREDENTIAL 0 rows exported
. . exporting table CTSSTATSCPU 0 rows exported
. . exporting table CTSSTATSMEMORY 0 rows exported
. . exporting table CTXCLUSTERDATA 0 rows exported
. . exporting table CTXCLUSTERNODESTATE 0 rows exported
. . exporting table CTXREGIONUTILSTATS 0 rows exported
. . exporting table CTXRESOURCESTATS 0 rows exported
. . exporting table CTXRESOURCEUTILSTATS 0 rows exported
. . exporting table CUCMCDR 0 rows exported
. . exporting table CUCMRTMTTHRESHOLDS 7 rows exported
. . exporting table DEPENDANTLINKRELATESLTPS 0 rows exported
. . exporting table DEVICE 0 rows exported
. . exporting table DEVICEACCESSCREDENTIAL 14 rows exported
. . exporting table DEVICEACCESSCREDENTIAL_MAP 92 rows exported
. . exporting table DEVICEACCESSPROFILE 7 rows exported
. . exporting table DEVICEACCESSPROFILE_MAP 37 rows exported
. . exporting table DEVICEEVENTCONFIG 0 rows exported
. . exporting table DEVICEEVENTCONFIGURATION 0 rows exported
. . exporting table DICTIONARY 40 rows exported
. . exporting table DISCOVEREDVIAPEP 0 rows exported
. . exporting table DISPLAY 0 rows exported
. . exporting table DJCNCY3_NCY5_LNKSPPRTDBYFR3 0 rows exported
. . exporting table DJCNCY3_U_DPNDNTLNKRLTSLTPS7 0 rows exported
. . exporting table DJCNCY4_NCY5_LNKSPPRTDBYFR3 0 rows exported
. . exporting table DJCNCY4_U_DPNDNTLNKRLTSLTPS7 0 rows exported
. . exporting table DJCNCY5_DPNDNTLNKRLTSLTPS 0 rows exported
. . exporting table DJCNCY5_LINKSUPPORTEDBYFR 0 rows exported
. . exporting table DJCNCY5_NCY5_LNKSPPRTDBYFR3 0 rows exported
. . exporting table DJCNCY5_U_DPNDNTLNKRLTSLTPS7 0 rows exported
. . exporting table DMM_CHANGENOTIFICATIONCONFIG 0 rows exported
. . exporting table DMM_DYNAMICGROUPRULE 0 rows exported
. . exporting table DMM_EXCLUDEASSOCIATION 0 rows exported
. . exporting table DMM_GROUP 0 rows exported
. . exporting table DMM_GROUPINGROUP 0 rows exported
. . exporting table DMM_GROUPMEMBERS 0 rows exported
. . exporting table DMM_GROUPNOTIFICATIONTASK 0 rows exported
. . exporting table DMM_MODELCLASS 483 rows exported
. . exporting table DMM_NOTIFICATIONBINDING 0 rows exported
. . exporting table DMM_PRIVILEGE 0 rows exported
. . exporting table DMM_PRUNESTATUS 0 rows exported
. . exporting table DMM_PRUNINGSERVICEDATA 0 rows exported
. . exporting table DMM_REPORT 0 rows exported
. . exporting table DMM_REPORTDATA 0 rows exported
. . exporting table DMM_REPORTDEFINITION 0 rows exported
. . exporting table DMM_RETRIEVALSPEC 0 rows exported
. . exporting table DMM_RETRIEVALSPECPROPERTIES 0 rows exported
. . exporting table DMM_ROLE 0 rows exported
. . exporting table DMM_ROLEGROUP 0 rows exported
. . exporting table DMM_ROLE_PRIVILEGE 0 rows exported
. . exporting table DMM_SYNCGROUPMEMBERTYPE 0 rows exported
. . exporting table DMM_TRANSACTIONALQUEUE
. . exporting partition PARTITION_0 1833651 rows exported
. . exporting partition PARTITION_1 3180996 rows exported
. . exporting partition PARTITION_2 1919197 rows exported
. . exporting partition PARTITION_3 3186350 rows exported
. . exporting partition PARTITION_4 1768849 rows exported
. . exporting partition PARTITION_5 6765965 rows exported
. . exporting partition PARTITION_6 1812452 rows exported
. . exporting partition PARTITION_7 3179884 rows exported
. . exporting partition PARTITION_8 1919512 rows exported
. . exporting partition PARTITION_9 3187226 rows exported
. . exporting partition PARTITION_10 1769187 rows exported
. . exporting partition PARTITION_11 6759413 rows exported
. . exporting table DMM_TRXQUEUESCANPOSITION 2 rows exported
. . exporting table DNGPTH4_CNNCTVTYNTWRKHSFRS 0 rows exported
. . exporting table DPNDNTLNKTYPSCNRLTLTPTYPS 0 rows exported
. . exporting table EIGRPADJACENCY 0 rows exported
. . exporting table EIGRPPEPSETTINGS 0 rows exported
. . exporting table EIGRPPEPSTATISTICS 0 rows exported
. . exporting table EIGRPPROCESSSETTINGS 0 rows exported
. . exporting table EIGRPPROCESSSTATISTICS 0 rows exported
. . exporting table EMSAMAUTHORITY 0 rows exported
. . exporting table EMSAMUSER 0 rows exported
. . exporting table EQUIPMENT 0 rows exported
. . exporting table EQUIPMENT_POSITION 0 rows exported
. . exporting table ETHERNETPROTOCOLENDPOINT 9 rows exported
. . exporting table ETHRNTPRTCLENDPNTEXTNDD 0 rows exported
. . exporting table EVENT 0 rows exported
. . exporting table FAULTALARM 54 rows exported
. . exporting table FAULTALARMNOTE 0 rows exported
. . exporting table FAULTALARM_ACTIVEEVENTS 3 rows exported
. . exporting table FAULTALARM_HISTORICALEVENTS 184 rows exported
. . exporting table FAULTDEPENDENCY 0 rows exported
. . exporting table FAULTEVENT 202 rows exported
. . exporting table FAULTEVENT_PROPS 3586 rows exported
. . exporting table FAULTROLLUP 3 rows exported
. . exporting table FEATUREACTIVEONPEP 0 rows exported
. . exporting table FEATUREAVAILABLETHROUGHLTP 0 rows exported
. . exporting table FEATUREDFUNCTION 0 rows exported
. . exporting table FEATURE_TEMPLATE 0 rows exported
. . exporting table FILESYSTEM 0 rows exported
. . exporting table FILESYSTEMENTRY 0 rows exported
. . exporting table FILESYSTEMSTATISTICS 0 rows exported
. . exporting table FLASHPARTITION 0 rows exported
. . exporting table FLASHSTORAGEDEVICE 0 rows exported
. . exporting table FLOORLAYOUT 0 rows exported
. . exporting table FORWARDINGPATH 0 rows exported
. . exporting table FORWARDINGRELATIONSHIP 0 rows exported
. . exporting table FREND 0 rows exported
. . exporting table FUNCTIONALCAPABILITY 0 rows exported
. . exporting table GEOGRAPHICSUBADDRESS 0 rows exported
. . exporting table GPRTTN3_INTRNLRSRCRLZDBY 0 rows exported
. . exporting table GRT 0 rows exported
. . exporting table GRT_ALTERNATE_KEYS 0 rows exported
. . exporting table HBRINF5_BRINF_NGMNTADDRSS67 0 rows exported
. . exporting table HBRINF5_DISCOVEREDVIAPEP 0 rows exported
. . exporting table HBRINF6_BRINF_NGMNTADDRSS67 0 rows exported
. . exporting table HBRINF6_DISCOVEREDVIAPEP 0 rows exported
. . exporting table HT_BASEENTITY
. . exporting table IMGINSTLLD5_FEATURES 0 rows exported
. . exporting table IMGINSTLLD5_RDWRPLTFRMS5 0 rows exported
. . exporting table INTERFACE 0 rows exported
. . exporting table INTERFACEPROTOCOLENDPOINT 9 rows exported
. . exporting table INTERFACE_IPADDRESSES 0 rows exported
. . exporting table INTRFCPRTCLENDPNTSTTSTCS 0 rows exported
. . exporting table INVENTORYENTITYCACHE 51 rows exported
. . exporting table IPACE_DSTNTNPRT 0 rows exported
. . exporting table IPACE_SOURCEPORT 0 rows exported
. . exporting table IPEPPARTICIPATESINSTPINSTANCE 0 rows exported
. . exporting table IPPROPERTIES 0 rows exported
. . exporting table IPPROTOCOLENDPOINT 6 rows exported
. . exporting table IPSLASESSION 0 rows exported
. . exporting table ISISADJACENCY 0 rows exported
. . exporting table ISISPEPSETTINGS 0 rows exported
. . exporting table ISISPEPSTATISTICS 0 rows exported
. . exporting table ISISPROCESSLEVELSETTINGS 0 rows exported
. . exporting table ISISPROCESSSETTINGS 0 rows exported
. . exporting table ISISPROCESSSTATISTICS 0 rows exported
. . exporting table ISSNGHBRINF_AREAADDRESSES 0 rows exported
. . exporting table JBSPCFCTN_CPBLTYRQRMNTS 0 rows exported
. . exporting table JBSPCFCTN_TINPTPRMTRS3 0 rows exported
. . exporting table JOB 53738 rows exported
. . exporting table JOBSPECBELONGSTOMXGROUP 0 rows exported
. . exporting table JOBSPECIFICATION 107 rows exported
. . exporting table JOBTRIGGER 111 rows exported
. . exporting table JOB_NPTPRMTRS 0 rows exported
. . exporting table JOB_RSLTPRMTRS 0 rows exported
. . exporting table KNOWNNEIGHBORINFO 0 rows exported
. . exporting table KNWNNGHBRINF_NGMNTADDRSS6 0 rows exported
. . exporting table LAG8023ADAGGPORT 0 rows exported
. . exporting table LAG8023ADMEMBERPORTSETTINGS 0 rows exported
. . exporting table LAGBASEAGGPORT 0 rows exported
. . exporting table LCLLCTNRLTVTGLCTN 0 rows exported
. . exporting table LGCLSNSR_INTRNLRSRCRLZDBY 0 rows exported
. . exporting table LICENSEINFO 1 rows exported
. . exporting table LINK 0 rows exported
. . exporting table LINKSPEC 0 rows exported
. . exporting table LINKSUPPORTEDBYFR 0 rows exported
. . exporting table LINKTERMINATIONPOINT 0 rows exported
. . exporting table LINKTERMINATIONPOINTREALIZEDBY 0 rows exported
. . exporting table LINKTERMINATIONPOINTSPEC 0 rows exported
. . exporting table LLDPNEIGHBORINFO 0 rows exported
. . exporting table LOCATION 0 rows exported
. . exporting table LOGICALSENSOR 0 rows exported
. . exporting table LOGICALSENSORSTATISTICS 0 rows exported
. . exporting table LOGICALSENSORTHRESHOLD 0 rows exported
. . exporting table LTPSUPPORTEDBYPEP 0 rows exported
. . exporting table MANAGEDELEMENTINTERFACE 6 rows exported
. . exporting table MANAGEDNETWORKELEMENT 6 rows exported
. . exporting table MANAGEDNETWORKELEMENTLOC 0 rows exported
. . exporting table MANAGEMENTSYSTEM 0 rows exported
. . exporting table MCUBLADE 0 rows exported
. . exporting table MDLROSINSTLLBLACTVTDON 0 rows exported
. . exporting table MEDIAFLOW 0 rows exported
. . exporting table MEDIANODE 0 rows exported
. . exporting table MEDIANODECONNECTION 0 rows exported
. . exporting table MEDIASTREAMINFO 0 rows exported
. . exporting table MEDIATRACESESSION 0 rows exported
. . exporting table MEETING 0 rows exported
. . exporting table MEETING_NATIVE_ID 0 rows exported
. . exporting table MEMORYDEVICE 0 rows exported
. . exporting table MEMORYPOOL 0 rows exported
. . exporting table MEMORYPOOLSTATISTICS 0 rows exported
. . exporting table MICROPHONE 0 rows exported
. . exporting table MMRYDVC_INTRNLRSRCRLZDBY 0 rows exported
. . exporting table MMRYPL_INTRNLRSRCRLZDBY 0 rows exported
. . exporting table MODULAROSINSTALLABLE 0 rows exported
. . exporting table MODULAROSROLLBACKPOINT 0 rows exported
. . exporting table MONTHLYENDPOINTNOSHOW 0 rows exported
. . exporting table MONTHLYENDPOINTUTILIZATION 0 rows exported
. . exporting table MTG_SRC_ND_PRTCPNTS 0 rows exported
. . exporting table MUTUALEXCLUSIONGROUP 0 rows exported
. . exporting table NAMAUTH 0 rows exported
. . exporting table NAMINFO 0 rows exported
. . exporting table NECLIENTCOUNT 0 rows exported
. . exporting table NETWORKRESOURCE 6 rows exported
. . exporting table NETWORKRESOURCECOMPOSEDOF 0 rows exported
. . exporting table NETWORKRESOURCEREALIZEDBY 0 rows exported
. . exporting table NETWORKRESOURCESPEC 0 rows exported
. . exporting table NETWORKVLAN 0 rows exported
. . exporting table NOTIFICATIONPROFILE 1 rows exported
. . exporting table NOTIFICATIONPROFILECATEGFILTER 0 rows exported
. . exporting table NOTIFICATIONPROFILEDESTCNF 0 rows exported
. . exporting table NOTIFICATIONPROFILEDGM 1 rows exported
. . exporting table NOTIFICATIONPROFILETRAPCNF 0 rows exported
. . exporting table NRISCAPABALEOFFUNCTION 0 rows exported
. . exporting table NRMEMBEROFREDUNDANCYSET 0 rows exported
. . exporting table NRPLAYSROLEINREDUNDANCYSET 0 rows exported
. . exporting table NTWRKELMNT4_NTWRKFNCTNS 0 rows exported
. . exporting table NTWRKRSRCEXPSSLNKTRMNTNPNTS 0 rows exported
. . exporting table NTWRKRSRCSPPRTDBYNTWRK 0 rows exported
. . exporting table NTWRKRSRCTYPCNEXPSLTPTYPS 0 rows exported
. . exporting table NUMERICRANGE 0 rows exported
. . exporting table ORDEREDCLASSES 0 rows exported
. . exporting table ORGNZTNUNT_BSNSSCTGRS 0 rows exported
. . exporting table OSPFADJACENCY 0 rows exported
. . exporting table OSPFAREAINFO 0 rows exported
. . exporting table OSPFAREAINFOSTATISTICS 0 rows exported
. . exporting table OSPFAREASTATISTICS 0 rows exported
. . exporting table OSPFPEPSETTINGS 0 rows exported
. . exporting table OSPFPEPSTATISTICS 0 rows exported
. . exporting table OSPFPROCESSSETTINGS 0 rows exported
. . exporting table OSPFPROCESSSTATISTICS 0 rows exported
. . exporting table OSPFVIRTUALLINK 0 rows exported
. . exporting table PAGPMEMBERPORTSETTINGS 0 rows exported
. . exporting table PARAMETER 0 rows exported
. . exporting table PARTY 0 rows exported
. . exporting table PARTYISATLOCATION 0 rows exported
. . exporting table PARTYPLAYSROLEFORNR 0 rows exported
. . exporting table PARTYPLAYSROLESFOREQUIPMENT 0 rows exported
. . exporting table PARTYROLE 0 rows exported
. . exporting table PARTYROLESPEC 0 rows exported
. . exporting table PASSWORDPOLICY 0 rows exported
. . exporting table PATHVIAFRS 0 rows exported
. . exporting table PCDOMAIN 0 rows exported
. . exporting table PCDOMAINCONTACTINFO 0 rows exported
. . exporting table PEPBOUNDTOPEP 0 rows exported
. . exporting table PHONE 0 rows exported
. . exporting table PHYSCLPRTCLENDPNTRLZDBY 0 rows exported
. . exporting table PHYSICALCONNECTOR 0 rows exported
. . exporting table PMCATEGORY 0 rows exported
. . exporting table PMDOMAIN 0 rows exported
. . exporting table PMROLE 0 rows exported
. . exporting table POLICYACTIONBASE 0 rows exported
. . exporting table POLICYCONDITIONBASE 0 rows exported
. . exporting table POLICYGROUPHASPOLICIES 0 rows exported
. . exporting table POLICYSET 0 rows exported
. . exporting table POLLERDATA 0 rows exported
. . exporting table POSTTSSESSIONMETRICS 0 rows exported
. . exporting table PREFERENCESNODE 395 rows exported
. . exporting table PREFERENCESNODE_VALUES 1205 rows exported
. . exporting table PROPERTYNAMEANDVALUE 53349 rows exported
. . exporting table PROTOCOL 0 rows exported
. . exporting table PROTOCOLENDPOINT 15 rows exported
. . exporting table PRTCNFGINF8_LLWDVLNLST 0 rows exported
. . exporting table QRTZ_BLOB_TRIGGERS 0 rows exported
. . exporting table QRTZ_CALENDARS 0 rows exported
. . exporting table QRTZ_CRON_TRIGGERS 4 rows exported
. . exporting table QRTZ_FIRED_TRIGGERS 0 rows exported
. . exporting table QRTZ_JOB_DETAILS 41 rows exported
. . exporting table QRTZ_JOB_LISTENERS 0 rows exported
. . exporting table QRTZ_LOCKS 5 rows exported
. . exporting table QRTZ_PAUSED_TRIGGER_GRPS 0 rows exported
. . exporting table QRTZ_SCHEDULER_STATE 0 rows exported
. . exporting table QRTZ_SIMPLE_TRIGGERS 37 rows exported
. . exporting table QRTZ_TRIGGERS 41 rows exported
. . exporting table QRTZ_TRIGGER_LISTENERS 0 rows exported
. . exporting table QUANTITY 0 rows exported
. . exporting table RCSSSTTNGS3_NTWRKADDRSSS 0 rows exported
. . exporting table RCSSSTTNGS3_VRFNAME 0 rows exported
. . exporting table RCSSSTTNGS4_RTDBGPVRSNS3 0 rows exported
. . exporting table RCSSSTTNGS5_NTWRKADDRSSS 0 rows exported
. . exporting table RCSSSTTNGS5_VRFNAME 0 rows exported
. . exporting table REDUNDANCYSET 0 rows exported
. . exporting table REDUNDANCYSETMEMBER 0 rows exported
. . exporting table REDUNDANCYSETROLE 0 rows exported
. . exporting table REDUNDANCYSETROLESPEC 0 rows exported
. . exporting table REDUNDANCYSETSERVICEDBYSET 0 rows exported
. . exporting table REDUNDANCYSETSPEC 0 rows exported
. . exporting table REDUNDANCYSETSPECHASROLES 0 rows exported
. . exporting table RIPADJACENCY 0 rows exported
. . exporting table RIPPEPSETTINGS 0 rows exported
. . exporting table RIPPEPSTATISTICS 0 rows exported
. . exporting table RIPPROCESSSETTINGS 0 rows exported
. . exporting table RIPPROCESSSTATISTICS 0 rows exported
. . exporting table ROLE_PRIVILEGE 0 rows exported
. . exporting table ROOTSWITCHFORVLAN 0 rows exported
. . exporting table ROUTINGADJACENCY 0 rows exported
. . exporting table ROUTINGAREAINFOSTATISTICS 0 rows exported
. . exporting table ROUTINGAREASTATISTICS 0 rows exported
. . exporting table ROUTINGNEIGHBORINFO 0 rows exported
. . exporting table ROUTINGNEIGHBORINFOSTATISTICS 0 rows exported
. . exporting table ROUTINGPEPSTATISTICS 0 rows exported
. . exporting table ROUTINGPROCESSSTATISTICS 0 rows exported
. . exporting table RTCLENDPNT7_SPPRTDSPDS 0 rows exported
. . exporting table RTLLNK5_DPNDNTLNKRLTSLTPS 0 rows exported
. . exporting table RTLLNK5_LINKSUPPORTEDBYFR 0 rows exported
. . exporting table RTNGNGHBRDSCVRDVPEP 0 rows exported
. . exporting table RUNNINGAPPLICATION 0 rows exported
. . exporting table RUNNINGPROCESS 0 rows exported
. . exporting table RUNNINGPROCESSSTATISTICS 0 rows exported
. . exporting table SBCADJACENCIES 0 rows exported
. . exporting table SBCCALLPOLICYSET 0 rows exported
. . exporting table SBCINSTANCE 0 rows exported
. . exporting table SFCTNCNDTN8_TRFFCFLTRDT 0 rows exported
. . exporting table SOFTWAREAPPLICATIONINSTALLED 0 rows exported
. . exporting table SOFTWAREELEMENTINSTALLED 0 rows exported
. . exporting table SOFTWAREIMAGEINSTALLED 0 rows exported
. . exporting table SPEEDQUANTITYRANGEASYMMETRIC 0 rows exported
. . exporting table STACK 0 rows exported
. . exporting table STACKPORT 0 rows exported
. . exporting table STACKSWITCH 0 rows exported
. . exporting table STATICROUTEENTRY 0 rows exported
. . exporting table STATICROUTETABLE 0 rows exported
. . exporting table STATSAGGREGATED 0 rows exported
. . exporting table STATSCISCOCPU 0 rows exported
. . exporting table STATSCISCOMEMORY 0 rows exported
. . exporting table STATSCISCOPHONECALLSTREAM 0 rows exported
. . exporting table STATSCISCOTBGCALL 0 rows exported
. . exporting table STATSCISCOTBGCALLCHANNELSAUDIO 0 rows exported
. . exporting table STATSCISCOTBGCALLCHANNELSVIDEO 0 rows exported
. . exporting table STATSCISCOTBGCALLSTREAMSOURCE 0 rows exported
. . exporting table STATSCISCOTBGPERIPHERAL 0 rows exported
. . exporting table STATSCISCOTBGPERIPHERALHISTORY 0 rows exported
. . exporting table STATSCISCOTPCALL 0 rows exported
. . exporting table STATSCISCOTPCALLSTREAMSOURCE 0 rows exported
. . exporting table STATSCISCOTPCALLSTREAMTYPE 0 rows exported
. . exporting table STATSCISCOTPPERIPHERAL 0 rows exported
. . exporting table STATSCISCOTPPERIPHERALHISTORY 0 rows exported
. . exporting table STATSCODIANHEALTH 0 rows exported
. . exporting table STATSCODIANSUPERVISORBLADES 0 rows exported
. . exporting table STATSCODIANSUPERVISORFANTRAYS 0 rows exported
. . exporting table STATSCODIANSUPERVISORPOWER 0 rows exported
. . exporting table STATSCODIANSUPERVISORVOLTAGE 0 rows exported
. . exporting table STATSCONDUCTORMCUINFO 0 rows exported
. . exporting table STATSCTMSPROCESS 0 rows exported
. . exporting table STATSCTMSSEGMENTS 0 rows exported
. . exporting table STATSCTSMANSERVICE 0 rows exported
. . exporting table STATSCUCMCPU 222 rows exported
. . exporting table STATSCUCMDBSUMMARY 0 rows exported
. . exporting table STATSCUCMMEMORY 222 rows exported
. . exporting table STATSCUCMPARTITION 1554 rows exported
. . exporting table STATSCUCMSERVICE 16650 rows exported
. . exporting table STATSDEVICEREGISTRATION 0 rows exported
. . exporting table STATSDEVICESTATUS 6 rows exported
. . exporting table STATSHRPROCESSORENTRY 0 rows exported
. . exporting table STATSHRSTORAGEENTRY 0 rows exported
. . exporting table STATSHRSWRUNENTRY 0 rows exported
. . exporting table STATSINTERFACE 0 rows exported
. . exporting table STATSMEDIAFLOW 0 rows exported
. . exporting table STATSPERFMON 0 rows exported
. . exporting table STATSTPCONDUCTORHEALTH 0 rows exported
. . exporting table STATSVCSHEALTH 0 rows exported
. . exporting table STATSVCSPEERS 0 rows exported
. . exporting table STATSVCSRESOURCEUSAGE 0 rows exported
. . exporting table STATSVCSZONES 0 rows exported
. . exporting table STATSVIDEOIPSLATESTAGG 0 rows exported
. . exporting table STATSVIDEOIPSLATESTLATEST 0 rows exported
. . exporting table STLLBL8_IMGINSTLLD5_FEATURES 0 rows exported
. . exporting table STLLBL8_TLLD5_RDWRPLTFRMS56 0 rows exported
. . exporting table STORAGEDEVICE 0 rows exported
. . exporting table STORAGEPARTITION 0 rows exported
. . exporting table STORAGEPARTITIONSTATISTICS 0 rows exported
. . exporting table STPINSTANCE 0 rows exported
. . exporting table STPNESETTINGS 0 rows exported
. . exporting table STRGDVC_INTRNLRSRCRLZDBY 0 rows exported
. . exporting table STTNGS11_CSSDFNSPSSVINTRFCS6 0 rows exported
. . exporting table STTNGS7_CSSDFNSPSSVINTRFCS6 0 rows exported
. . exporting table STTNGS8_CSSDFNSPSSVINTRFCS6 0 rows exported
. . exporting table STTNGS9_CSSDFNSPSSVINTRFCS6 0 rows exported
. . exporting table SWITCHCONTROLCLUSTER 0 rows exported
. . exporting table SWITCHCONTROLCLUSTERMEMBER 0 rows exported
. . exporting table SWTCHCNTRLCLSTRHSCNDDTMMBRS 0 rows exported
. . exporting table SYSTEMNODE 0 rows exported
. . exporting table SYSTEM_PREF_VALUE 0 rows exported
. . exporting table TASKELEMENT 53738 rows exported
. . exporting table TASKELEMENTSPECIFICATION 107 rows exported
. . exporting table TASK_NPTPRMTRS 0 rows exported
. . exporting table TASK_RSLTPRMTRS 53245 rows exported
. . exporting table TCUDEVICE 0 rows exported
. . exporting table TELEPRESENCECONDUCTOR 0 rows exported
. . exporting table TELEPRESENCEEXCHANGE 0 rows exported
. . exporting table TELEPRESENCEMCU 0 rows exported
. . exporting table TELEPRESENCESCHEDULER 0 rows exported
. . exporting table TELEPRESENCESCHEDULERPROPS 0 rows exported
. . exporting table TELEPRESENCESYSTEM 3392 rows exported
. . exporting table TESTMODELOBJECT 0 rows exported
. . exporting table TOPOLGYNEGROUPBELONGSTOCLOUD 0 rows exported
. . exporting table TOPOLOGYIPPEPHASVLANCONFIG 0 rows exported
. . exporting table TOPOLOGYNEGROUP 0 rows exported
. . exporting table TOPOLOGYNEINFO 0 rows exported
. . exporting table TOPOLOGYVLANPORTCONFIGINFO 0 rows exported
. . exporting table TOPOLOGYVTPCONFIGFORNE 0 rows exported
. . exporting table TOPONEGROUPHASNES 0 rows exported
. . exporting table TOUCH 0 rows exported
. . exporting table TPLGYNINF_TROUTERID 0 rows exported
. . exporting table TPPERIPHERAL 0 rows exported
. . exporting table TRAFFICCHARACTERISTICS 0 rows exported
. . exporting table TSEVENT 0 rows exported
. . exporting table TSKGRPSPCHSTSKELMNTSPCS 0 rows exported
. . exporting table TSKSPCFCTN_TINPTPRMTRS3 104 rows exported
. . exporting table TSPROFILEINFO 0 rows exported
. . exporting table TSSESSION 0 rows exported
. . exporting table TSSESSIONTRIGGEREVENTS 0 rows exported
. . exporting table TSSESSION_CONTEXT 0 rows exported
. . exporting table USERACCOUNT 0 rows exported
. . exporting table USEREXTENSIONS 6 rows exported
. . exporting table USERNODE 0 rows exported
. . exporting table USERS 6 rows exported
. . exporting table USER_PREF_VALUE 0 rows exported
. . exporting table VALUEMAPPING 154 rows exported
. . exporting table VIRTUALSWITCHMEMBER 0 rows exported
. . exporting table VLANIDLIST 0 rows exported
. . exporting table VLANIDLIST_VLANIDRANGE 0 rows exported
. . exporting table VLANIDLIST_VLANIDSET 0 rows exported
. . exporting table VLANINTERFACE 0 rows exported
. . exporting table VLANSETTINGSFORNE 0 rows exported
. . exporting table VLANSWITCHPORTSETTINGS 0 rows exported
. . exporting table VLANTRUNKINGSETTINGS 0 rows exported
. . exporting table VSAAAGENTSTATUS 0 rows exported
. . exporting table VSAAENTITY 0 rows exported
. . exporting table VSAASESSIONS 0 rows exported
. . exporting table VSAATESTRESULT 0 rows exported
. . exporting table VSLENDPOINTSTATISTICS 0 rows exported
. . exporting table VSLINKENDPOINTSETTINGS 0 rows exported
. . exporting table VSLPORTSTATISTICS 0 rows exported
. . exporting table VTPSETTINGSFORNE 0 rows exported
. . exporting table XGS_DYNAMICGROUPRULE 89 rows exported
. . exporting table XGS_DYNGROUP_MEMBERTYPE 623 rows exported
. . exporting table XGS_GROUP 92 rows exported
. . exporting table XGS_GROUPATTRIBUTE 0 rows exported
. . exporting table XGS_GROUPINGROUP 87 rows exported
. . exporting table XGS_GROUPMEMBERS
. . exporting partition XGS_GROUPMEMBER_P0 0 rows exported
. . exporting partition XGS_G_P_630630 6 rows exported
. . exporting partition XGS_G_P_630631 2489 rows exported
. . exporting partition XGS_G_P_630632 0 rows exported
. . exporting partition XGS_G_P_630633 0 rows exported
. . exporting partition XGS_G_P_630634 0 rows exported
. . exporting partition XGS_G_P_630635 0 rows exported
. . exporting partition XGS_G_P_630636 0 rows exported
. . exporting partition XGS_G_P_630637 0 rows exported
. . exporting partition XGS_G_P_630638 0 rows exported
. . exporting partition XGS_G_P_630639 0 rows exported
. . exporting partition XGS_G_P_630640 0 rows exported
. . exporting partition XGS_G_P_630641 0 rows exported
. . exporting partition XGS_G_P_630642 0 rows exported
. . exporting partition XGS_G_P_630643 0 rows exported
. . exporting partition XGS_G_P_630644 0 rows exported
. . exporting partition XGS_G_P_630645 2203 rows exported
. . exporting partition XGS_G_P_630646 19 rows exported
. . exporting partition XGS_G_P_630647 234 rows exported
. . exporting partition XGS_G_P_630648 0 rows exported
. . exporting partition XGS_G_P_630649 0 rows exported
. . exporting partition XGS_G_P_630650 0 rows exported
. . exporting partition XGS_G_P_630651 0 rows exported
. . exporting partition XGS_G_P_630652 32 rows exported
. . exporting partition XGS_G_P_630653 0 rows exported
. . exporting partition XGS_G_P_630654 1 rows exported
. . exporting partition XGS_G_P_630655 0 rows exported
. . exporting partition XGS_G_P_630656 0 rows exported
. . exporting partition XGS_G_P_630657 0 rows exported
. . exporting partition XGS_G_P_630658 0 rows exported
. . exporting partition XGS_G_P_630659 0 rows exported
. . exporting partition XGS_G_P_630660 0 rows exported
. . exporting partition XGS_G_P_630661 0 rows exported
. . exporting partition XGS_G_P_630662 0 rows exported
. . exporting partition XGS_G_P_630663 0 rows exported
. . exporting partition XGS_G_P_630664 0 rows exported
. . exporting partition XGS_G_P_630665 0 rows exported
. . exporting partition XGS_G_P_630666 0 rows exported
. . exporting partition XGS_G_P_630667 0 rows exported
. . exporting partition XGS_G_P_630668 0 rows exported
. . exporting partition XGS_G_P_630669 0 rows exported
. . exporting partition XGS_G_P_630670 0 rows exported
. . exporting partition XGS_G_P_630671 0 rows exported
. . exporting partition XGS_G_P_630672 0 rows exported
. . exporting partition XGS_G_P_630673 2 rows exported
. . exporting partition XGS_G_P_630674 6 rows exported
. . exporting partition XGS_G_P_630675 0 rows exported
. . exporting partition XGS_G_P_630676 0 rows exported
. . exporting partition XGS_G_P_630677 0 rows exported
. . exporting partition XGS_G_P_630678 0 rows exported
. . exporting partition XGS_G_P_630679 0 rows exported
. . exporting partition XGS_G_P_630680 0 rows exported
. . exporting partition XGS_G_P_630681 0 rows exported
. . exporting partition XGS_G_P_630682 4 rows exported
. . exporting partition XGS_G_P_630683 0 rows exported
. . exporting partition XGS_G_P_630684 0 rows exported
. . exporting partition XGS_G_P_630685 0 rows exported
. . exporting partition XGS_G_P_630686 0 rows exported
. . exporting partition XGS_G_P_630687 0 rows exported
. . exporting partition XGS_G_P_630688 3 rows exported
. . exporting partition XGS_G_P_630689 0 rows exported
. . exporting partition XGS_G_P_630690 0 rows exported
. . exporting partition XGS_G_P_630691 0 rows exported
. . exporting partition XGS_G_P_630692 0 rows exported
. . exporting partition XGS_G_P_630693 0 rows exported
. . exporting partition XGS_G_P_630694 0 rows exported
. . exporting partition XGS_G_P_630695 0 rows exported
. . exporting partition XGS_G_P_630696 0 rows exported
. . exporting partition XGS_G_P_630697 0 rows exported
. . exporting partition XGS_G_P_630698 0 rows exported
. . exporting partition XGS_G_P_630699 1 rows exported
. . exporting partition XGS_G_P_630700 0 rows exported
. . exporting partition XGS_G_P_630701 1 rows exported
. . exporting partition XGS_G_P_630702 0 rows exported
. . exporting partition XGS_G_P_630703 0 rows exported
. . exporting partition XGS_G_P_630704 2489 rows exported
. . exporting partition XGS_G_P_630705 0 rows exported
. . exporting partition XGS_G_P_630706 0 rows exported
. . exporting partition XGS_G_P_630707 33 rows exported
. . exporting partition XGS_G_P_630708 2456 rows exported
. . exporting partition XGS_G_P_630709 42 rows exported
. . exporting partition XGS_G_P_630710 0 rows exported
. . exporting partition XGS_G_P_630711 0 rows exported
. . exporting partition XGS_G_P_630712 0 rows exported
. . exporting partition XGS_G_P_630713 0 rows exported
. . exporting partition XGS_G_P_630714 253 rows exported
. . exporting partition XGS_G_P_630715 0 rows exported
. . exporting partition XGS_G_P_630716 33 rows exported
. . exporting partition XGS_G_P_630717 2203 rows exported
. . exporting partition XGS_G_P_630718 3481 rows exported
. . exporting partition XGS_G_P_630719 6 rows exported
. . exporting partition XGS_G_P_3098699604 1570 rows exported
. . exporting partition XGS_G_P_3098699605 471 rows exported
. . exporting table XGS_VDOBJECTGRAPHRULE 0 rows exported
. . exporting table XGS_VD_OBJECT_GRAPH 0 rows exported
. . exporting table XMPPRIVILEGE 0 rows exported
. . exporting table XMPROLE 7 rows exported
. . exporting table XMPTASK 0 rows exported
. . exporting table XMPUSERDOMAINROLE 0 rows exported
. . exporting table XMPUSERGROUPDOMAINROLE 0 rows exported
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting materialized views
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully without warnings.
^@Backup completed successfully..
^@^@
I can see that the user is logged into the FTP Server. A file has been also created 544415 kb... (prime-141024-1022.tar.gpg) So it works fine with CLI but I want to get it done with GUI and a schedule.
Thanks so far! :-) -
What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?
What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?
• PI provides visibility for autonomous clients within the same list view as lightweight and wired clients (client list page).
• Rogue AP detection for autonomous AP's is not supported (it's supported in CUWN).
• Alarms/events for client authentication issues (e.g. authentication failure) are displayed in PI.
• Config management for autonomous AP's is via CLI template. Config comparison and archiving functionality in PI leverages these same features that were brought in from LMS, so need to defer to others in terms of whether this is a cross-platform feature in PI or is only supported on a subset of platforms. Config comparison/archive is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client sessions, etc.) reports, and there are extensive reports for CUWN -
User Name and Password for Cisco Prime Infrastructure 2.1
Hi all:
I am stuck at the login page of Cisco Prime Infrastructure 2.1.
I have tried using the user name root and its password (when log in with root at Vsphere Client) and also the login user name "before" get into the appliance infrastructure, all cannot work.
Anybody knows what is the default username or password or any way to set the username and password for this Cisco Prime Infrastructure 2.1 website?
Thanks!
tangsuanHi Tangsuan,
Following is the documented procedure for password recovery..
In order to modify the GUI root user password, you will need to login to the NCS CLI
as an admin user, and enter the command
"ncs password root password <new password>" (without the quotes)
This should set the web interface root user password :
http://www.cisco.com/en/US/docs/wireless/ncs/1.1/configuration/guide/manag.html#wp1268889
If you have lost your CLI password , try the default logging that is ,
CLI user is admin and not root, so please try logging in as admin with
the password that was set during setup. If that does not work , you need
the install disk that came with the appliance to recover that password.
Follow these steps:
Recovering a Lost Admin Password
If you lose or forget the admin password for NCS appliance, follow these steps.
Step 1 Reboot the NCS appliance with the ISO DVD inserted. The Cisco Prime Network Control
System Welcome screen appears:
ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin
Welcome to Cisco Prime Network Control System
To boot from hard disk, press <Enter>.
Available boot options:
[1] Network Control System Installation (Keyboard/Monitor)
[2] Network Control System Installation (Serial Console)
[3] Recover administrator password. (Keyboard/Monitor)
[4] Recover administrator password. (Serial Console)
<Enter> Boot existing OS from Hard Disk.
Enter boot option and press <return>.
boot:
Step 2 Select the desired recovery option, 3 or 4, depending on how you
are connected to the appliance and then follow the prompts.
Thanks-
Afroz
***Ratings Encourages Contributors **** -
Cisco prime 2.1 / 2.2 support for Cisco ise 1.3 ?
Hi, I just tried to connect cisco PI 2.1 to cisco ISE 1.3, but fails.
I read the release Notes, only ISE 1.2 ist supported.
But I was wondering that the ssl handshake fails (I have done a packet capture).
So PI 2.1 has not tried to connect to ise 1.3 via api, because of the connection fails at the ssl handshake stage.
Anyway, does anybody know if ISE 1.3 will be supported with PI 2.2 or a version of PI 2.1.x ?Why doesn't the REST API communication in Prime 2.1 (2.1.0.0.87) support TLS? The platform itself seem to be able to handle TLS-DHE-RSA with AES-128-CBC-SHA. Why is it trying to use SSLv2 ?
These protocol is incompatible and very much outdated: http://en.wikipedia.org/wiki/Transport_Layer_Security#SSL_1.0.2C_2.0_and_3.0
Can this behavour be reconfigured in CLI or at least be allowed in ISE 1.3 to make a workaround until a working patch or upgrade is done? Could or should adding the Cisco Prime server as managed node in ISE circumvent the incompability? -
Cisco Prime 2.1 patch pi211_20140630_01.ubf install
To the Cisco Prime Community;
I have upgraded and installe dthe patch for 2.1 on the primary server. Where the HA is concerned, how would thw patch be installed ? I've tried via the command line and receive the following error;
disk: 1% used (363860 of 133885104)
temp. space 2% used (35964 of 1967952)
Internal filesystems:
all internal filesystems have sufficient free space
xxxxxx/sysadmin# patch install pi211_20140630_01.ubf defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Please ensure you have a backup of the system before proceeding.
Proceed with the patch install ? (yes/no) [yes] ? yes
Initiating Application Patch installation...
% Unable to unbundle the package. Package may be corrupt or there is not enough disk space
I received this error several times. Last time I ran a cleanup and copied the file again, please advise.This patch is not intended to be installed from CLI. You have to update this from the GUI of Cisco Prime Infra.
To install this patch from GUI :
>> Log in to the Prime Infrastructure server using an ID with administrator privileges and choose Administration > Software Update .
>> Click Upload Update File and browse to the location where you saved the patch file. Click OK to upload the file.
>> When the upload is complete:
a. On the Software Upload page, confirm that the Name, Published Date and Description of the patch file are correct.
b. Select the patch file and click Install .
c. You will see a popup message indicating when the installation is complete. You should also see a listing for the patch in the “Updates” table, with a “Yes” opposite the patch under the “Installed” column, and a “Yes” under the “Pending Restart” column.
>> Restart the server by first executing the ncs stop command and then the ncs start command, as explained in Running Commands.
Step 7 Verify that the patch is installed by logging into the server and choosing Administration > Software Update . You should see a listing for the patch in the “Updates” table, with a “Yes” opposite the patch under the “Installed” column, and a “No” under the “Pending Restart” column.
For more details check the Release notes for PI 2.1.1.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
Cisco Prime Infra 1.2 Web server
Hello,
I have installed a version of Cisco Prime Infrastructure 1.2.11 with a kickstart .ova file on my production network.
Everything goes fine and I follow the instructions for installation ; i can ping my Cisco PI server and ssh into it as admin.
However, when I try to reach the web server via https, it does not work. I have reviewed my proxy settings and they are not to blame. The nslookup returns the IP address when I poll it. I have read elsewhere that I would need "NCS" service to be started, but I can't find anything called NCS on my Prime Infra server in CLI mode.
Anyone with a suggestion for this issue ?
Thanks
JeremyActually I know what's happening ; the PnP (plug n play) setup was not configured, and so 443 port was not up.
I configured PnP using "pnp setup" command, but then I have to supply a list of certificates and keys :
Enter absolute pathname of PnP Gateway server key file:
Enter absolute pathname of PnP Gateway server certificate file:
Enter absolute pathname of Prime Infrastructure server certificate file:
I tried to do this with the private key I had for my server. I created it on my Certificate Authentication and got a .key and a .csr (certificate server request).
However when i feed them to my PnP setup I get this error :
Setup is in progress.......
Stop PnP Gateway server
OpenSSL command failed for mycert.csr and mykey.key
any idea as to why this is happening?
I read elswhere again that i need to run commands with "ncs" but I don't have "ncs" commands on my prompt...
Thank you for your time -
Cisco Prime Infrastructure 1.3 Web Log Invalid user password
Hi,
I recently installed Cisco Prime Infrastructure 1.3 per the set up guide. I was able to login into the webinterface.
Then I insert the radius server and reload ncs. Since then I'm not able to login to the web interface. I get the following error message "Invalid Username or Password. Please try again". Even when I set the ncs root user with a new password. One issue could be that i forgot the enable fallback to local.
Is there a way to change the radius config back via cli?
Thanks a lot
HansruediHi Hansruedi,
Thanks you for your help and your time.
I followed your recomandation until the fourth step.
But after this step, I lost the web page connection.
I check nsc status but all is running :
NMS still stopped. NMS must be running to have an access by web page ?
I restart Prime (by reload command) but nothing changed.
Thanks -
Cisco Prime Infrastructure patch 2.1.1 - installed or no?
I’ve reinstalled new Cisco Prime using the newest ISO image version 2.1.0.0.87. After that I installed the patch file (pi211_20140630_01.ubf) for version 2.1.1 and rebooted the server. After that I don’t see any information in CLI that I have version 2.1.1 installed. When I type sh ver I still see version 2.1.0.0.87. The only information which confirm this information is a “Software update” site in GUI interface where status of the patch is "Installed". Is this normal behavior?
Regards
LukasPatch installed through ubf not showing info in CLI and login page
CSCup78886
Description
Symptom:
After installing the "2.1.1" patch (filename pi211_20140630_01.ubf) for Prime Infrastructure 2.1.0.0.87 through the Administration > Software Update page and issuing an "ncs stop/ncs start" sequence from the CLI, the version information on the Prime Infrastructure login page, the CLI output of "show version" or Help > About pages does not indicate version 2.1.1.
Conditions:
Workaround:
At this time, there is no workaround. Please confirm proper patch installation on the Administration > Software Update page. Column "Installed' with the value "Yes" and column "Pending Restart" with the value "No" indicate that the 2.1.1 patch is indeed correctly installed.
Last Modified:
Jul 22,2014
Status:
Open
Severity:
6 Enhancement
Product:
Network Level Service
Known Affected Releases:
(1)
2.1(1) -
Cisco Prime Infrastructure 1.2 with SNMPv3
Dears,
I am trying to add a router on Cisco Prime Infrastructure 1.2 using snmpv3 (authpriv, sha & aes256). When i go to device work center and add a device, i cannot find the AES-256 in the privacy options. Only None, DES, and AES-128 are available.
Is there any workarround?
Please advise.
MoustafaPI only supports SNMP privacy up through AES-128 at this time. Reference the guide section on adding an new SNMP credential entry.
Additionally there is a bug with SNMP v3 support in PI 1.2. It should be resolved in PI 1.3. -
WLC 2504 in Cisco Prime Infrastructure 1.2
Trying to add Cisco 2504 Wireless Controller, Software Version 7.3.101.0, to Cisco Prime Infrastructure
1.2 (1.2.0.103), License Evaluation, with no success.
When using Discovery, Discovery Job show Credential Errors: "Error occured due to invalid SNMP credential"
When Add Device from Device Work Center I get:
Reachability is "Unknown", Device Type is empty, Collection Status is "Managed with Warnings", with message "SNMP Failure: No Response for SNMP Get request.", Collection Time is empty.
I've tried with both snmp v2 and v3.
I've tried to lower "Maximum VarBinds per Get PDU" to 10 or 20, cause I've read similar problem in NCS.I solved the same problem 5min ago.!
select the device and press syc ..that helped me ... -
Can't access Prime 1.3 CLI
Trying to access a Cisco Prime 1.3 VA via CLI, but not having any luck. Working with a customer who does not remember the original "admin" user created at setup. I can access the root shell with the root user (have that user info :))
I have also tried creating a new user with "admin" privilages but still cannot access CLI. Is there something I'm missing, or am I out of luck because I don't have the original "admin" user info created at setup?try these:
Recovering Prime Infrastructure Password:
http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-3/configuration/guide/pi_13_cg/tasks.html#wp1216240
Maybe you are looking for
-
I have a panasonic vcr and want to transfer video tapes onto dvd . Is the best way of doing this by scart from vcr to dvd recorder or is it better to transfer onto my apple imac G5 and then burn onto the dvd. I would prefer to use the G5 route as I t
-
Table parameter does not contain values in RFC call
Hello Experts, I created RFC in R/3 with table parameter I_CUSTOMER. This RFC will be called by the CRM to pass all the customers data to R/3. The RFC was triggered by CRM passing 20 entries in I_CUSTOMER. However, when the debugger jumps in R/3 the
-
Function to get the last day of the current month
Hi friends Now I need to know a function to get the last day of a month. I had between my notes that function but I do not find it and I think you can give the answer faster. Thanks Joel Pérez DBA Oracle
-
What's the advantage of using jspx over jsp? Thank you.
-
--+APPEND Hint -- advantages and disadvantages in OLTP system
I have a process in with an insert statement takes a lot of time. When I modify the insert statement to use --+ APPEND hint the insert time reduces a lot. There are a lot of indexes on this table and the table and indexes are in logging mode. Can som