Cisco Prime 2.0 - Nexus clients not discover

Dear all,
I've installed a Cisco Prime infrastructure 2.0 and it's working perfectly except for Nexus 7k : I canot see the wired client connected (useful for traking) while it's working fine on many other devices. The devices are managed with an inventoy collection completed (No data vailable in Device Details/ clients / current associated wired clients).
any idea ?
regards,
vincent.

Hi Vincent,
I have this problem too. I found this related information about supporting "clients and Users" for Nexus in PI2.x/LMS4.2.4.:
Cisco Prime LMS 4.2.4 - User Tracking for N5K: https://supportforums.cisco.com/discussion/12155236/cisco-prime-user-tracking-n5k, User Tracking require the SNMP-BRIDGE-MIB on the target device(s). That was introduced in NX-OS 6.02 on the Nexus 5000 platform.
LMS 42 user tracking: https://supportforums.cisco.com/discussion/11605281/lms-42-user-tracking.
Nexus 7k and 5K in LMS 3.2.1. “When adding the Nexus devices to DCR, provide the “netadmin SNMP RO credential”. When other SNMP RO credential is provided, user tracking will not collect end host data. The Nexus device should be running NXOS 5.1(1), 5.1(3) or later. 5.1(2) is not supported.
Configure the device to map community with context using the below command: snmp-server context vrf, snmp-server mib community-map context
Please let us know what the progress is of the TAC case. I'm very interested.
Kind Regards
Ad

Similar Messages

Cisco Prime Infrastructure 2.2 clients and users IPs not detected

Hi all,
I have cisco PI2.2 and discovered all the network and i notified that there are some clients' IPs (Servers or PCs or Laptops or ....) not detected.
please advice what may be the issue ?

Hi,
does anyone happen to know if that problem is fixed? My currently setup looks like this:
1. Cisco Prime Infrastructure 2.1 with updated device pack.
2. Assurance license
3. ASA5510 which has enabled netflow. Netflow is being sent to Cisco Prime 2.1
I do receive netflow raw data within Cisco Prime 2.1 but any graphical display of netflow data is not working. Does anybody has an idea where the problem is? Could it be that the graphical data is only displayed when sending netflow 1, netflow 5 or netflow 7?
regards
Maurus

Cisco Prime Infrastructure 1.2 OVA not found

Hi all,
I want to download Cisco Prime Infrastructure 1.2 OVA but I can't find it, there is just "Cisco Prime Infrastructure 1.2 Plug and Play for Virtual Appliance " . Is this the right OVA ?
Thanks for your help
BR
Aaziz

Hi Aaziz,
Unfortunately this download of this file is not available anymore on cisco.com site.
As an alternative, you can download PI 1.3 OVA, where you can find the same features and
interface:
http://software.cisco.com/download/release.html?mdfid=284652876&softwareid=284272932&relea
se=1.3&relind=AVAILABLE&rellifecycle=&reltype=all
Note: you can use the same license of PI 1.2 on PI 1.3
Thanks-
Afroz
***Ratings Encourages Contributors ***

Unable to login to the web console cisco Prime assurance 9.0 password not working :(

Hi all,
I was able to install the Cisco Prime 9.0 assurance
I am entering the correct username and password still I am not able to login to Web admin page
How do i reset the password and login to the web admin console??
Plz help... urgent...
Rgds,
Rebecca....

Thanks Rob so much
yes i booted the NCS from the DVD and installed the applications
now i have two NCS appliances one is running PI 1.2 and other LMS 4.2

Cisco Prime Infraestrutre 2.0 - JOB Not ends

Hi,
i've a problem in my Cisco prime Infraestructure, i've scheduled a IOS upgrade with a reload in the end, i forgot to permit in the equipment to do reloads from SNMP, and the question is all the job was done except the reload, bu in Jobs dashboard i still seeing that the job is in progress anda i can not abort the process.
Anyone kows ow can i clean this job, from the job list, and why this happens?

Hi,
i've alreay added the snmp-server command.
With Job i still have problems, qhen i try do abort the job i've the follwing error:
"Selected jobs were not aborted. FAILURE : Exception occured while aborting the job : Job with job id 2752679 does not have any running cancellable tasks.-JOBM_042"
The cancel option isn't enable.

Cisco Prime Infrastructure Scheduled Configuration Archive not executing

We have a deployment of Cisco Prime Infrastrcuture 1.3 (1.3.0.20).
Configuration Archive is a feature that collects and archives the device configurations i.e. cisco switches.
You have an option to schedule this to run, say daily, weekly etc. Once scheduled you can see it in the "Jobs Dashboard" and with the "next start time" of what you configured. I have a situation whereby the time it is suppose to start - it doesnt - howevere flags the job as a "success". Not newe device configurations are archived and the "next start time" remain the same. Its almost like it is failing to execute, but some other process under the hood thinks that it was been executed correctly?
Any ideas or experience that could help here would be appreciated!

Some extra info that has just come to my attention. At one point we were running (we're actually still running) CiscoWorks with LMS3.2 and Cisco NCS 1.x. I merged these two things together into Cisco Prime Infrastructure (upgraded the licensing to get 450 lifecycle licenses to cover the APs + all of the devices coming from LMS3.2). I followed all of the documented procedures to upgrade the NCS appliance to Prime Infrastructure. But when I type "show application" from the CLI of the NCS appliance (now the Prime Infrastructure appliance) I see this:
HQ-NCS1/admin# show application
NCS Cisco Prime Network Control System
Is that normal? Maybe this is my problem. Should this output list "Cisco Prime Infrastructure" instead of (or in addtion to) Cisco Prime Network Control System? When I login to the GUI it shows "Cisco Prime Infrastructure" and the GUI has changed considerably (menus are different) so I'm assuming that the application upgrades I launched from the CLI to go to Prime Infrastructure worked fine.

Cisco Prime Infrastructure 1.2 is not working https & ncs

Hi, I have just deploy Cisco Prime Infrastructure 1.2 in a virtual appliance (Vmware Esxi 5.1). Console is ok & setup is also completed. but there is no NCS application. only app is shwoing: NCSPNP
Cannot access from https also.
Please suggest how to Starting Prime Infrastructure Serve

From what you describe, it sounds like you have installed the Plug and Play (PNP) ova image. You need to install the Prime Infrastructure image.
See the screenshot below for details (click to enlarge):

Cisco Prime 1.3 applications dashboard not visible

Dear all,
I have added a flow exporter from 2 wlc 5508 in direction of our Cisco Prime, under system / data sources i see data from my controllers coming but status is down.
Addtionally I cannot see under details dashboards the applications dashboard. even if i try to manage dashboards i cannot have applications.
After checking our license with our reseller he said that we should have this netflow feature,
But could you explain me why i cannot see the dashboards ?
Do we need to install or configure a module ?
Thanks

Hi ,
AFAIK , you need to have "assurance licenses " for this.
Thanks-
Afroz
***Ratings Encourages Contributors ***

Cisco Prime Infrastructure 2.1 to setup Discovered Devices in Dashboard Detail auto refresh in 3 minutes

Hi all:
I found out that the discovered devices (after successful scanning) in the main Dashboard Detail cannot or take very long time to auto-refreshing the status change.
May I know is there any way by Command Line at the "Root" (I am using an OVA version) or by setting inside the Prime Infrastructure with GUI method to do scheduled Refreshing on the Dashboard Detail?
Thanks!
Best regards,
tangsuan

Hi all:
I have tried using Designing Monitoring Template to set the Health Check Polling time from default 15 minutes to 5 minutes and also tried also 1 minute.
The result is 5 minutes is working but 1 minute is not working.
May I know any one can help on this?
Many thanks!
Best regards,
tangsuan

Cisco Prime Infrastructure 2.2 API not working

Just upgraded to PI 2.2. API got error of "Access is denied to prime Infrastructure". Even assigned the user with 'Super Users' and 'NBI credential, NBI read, NBI', we still got denied error.
We use Perl to access API. Any sample code for authentication and authorization in Perl? Now even URL of https://prime.nm.nd.edu/webacs/api/v1/data got denied error.
Thank you.

PI 2.2 API changed authorization group for API access. We added "NBI Read" and "NBI Credential" to API user, and resolved the access issue.
Cheers.

Upgrading WCS 7 to Cisco Prime (CPI) 2

Hello,
I have read a few article and posts about upgrading WCS 7 to CPI 1.2 via NCS. However now with Prime 2.0 I was hopping I didn't have to use NCS.
I can't find any migration guides or documents about migrating to 2.0 instead of 1.x.
Can anyone point me in the right direction.

Direct migration from WCS 7.x to Cisco Prime Infrastructure 2.0 is NOT possible.
in my work I had this problem.
the only solution was to first install the NCS 1.1, after the patch 1.1.1.24 and then migrate to 2.0
Backup WCS data , upgrade to NCS 1.1 and restore de data...
install patch 1.1.1.24 , only then you can do the upgrade to version 2
CISCO:
"We strongly recommend upgrading your WCS to 7.0.230.0 (for data integrity) or higher before attempting to migrate to NCS.
Users will first need to do an intermediary migration to NCS 1.1.1.24, and then do an inline upgrade (or migration) to Cisco Prime Infrastructure 2.0"

Cisco Prime LMS 4.1, "License Server/Daemon Manager is down."

Hello,
We having problem with Cisco Prime LMS running version 4.1.
When open Home page shows the next message: "License Server/Daemon Manager is down. Please check license.log for more information." (see attached)
The daemon server is stopped already and i can't restart it, see below:
C:\>net start crmdmgtd
The Cisco Prime Daemon Manager service is starting.
The Cisco Prime Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Thanks

It looks like you're seeing CSCte49301. Follow the release note steps to solve this:
Symptom:
The EssentialsDM daemon hangs in a Waiting to initialize state (as seen in the output of the pdshow command). Additionally, one might see "Error connecting to JRM" in Resource Manager Essentials applications.
Conditions:
This occurs on Windows servers after the patch for KB968930 is installed, and only if the Windows Remote Management service was started prior to starting CiscoWorks Daemon Manager.
Workaround:
Shutdown CiscoWorks Daemon Manager with the following command from the server's command prompt:
net stop crmdmgtd
Delete the following two files:
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry.backup
Restart CiscoWorks Daemon Manager with the following command:
net start crmdmgtd
If that does not work, then the Windows Remote Management service must be stopped, and disabled. Then, CiscoWorks Daemon Manager must be restarted.

Cisco prime infrastructure not detect IP address of clients

hi all,
I have Cisco Prime infrastructure 1.2 and when move to monitor >> clients tab it lists me all the clients in my network but their IP address list estates "not detected" ?
please any advice?
I appreciate your kindly support.

Just an update that while this appears to have worked fairly well (as far as Cisco Management Planes go), there was one small 'gotcha' I've noticed so far:
After the services came back up, the entries for our RADIUS servers did not function. No, not because I didn't update the clients address record on the RADIUS server itself, but because the RADIUS server record(s) within CPI have a field called 'Local Interface IP' that still reflects the previous IP assigned to CPI. A quick edit/save with the new interface fixes up the issue however.
Cheers!

Prime Infrastructure 2.0 not discovering wired clients

Hi
My PI is not discovering all my wired clients.
Wired Client Status
Administration > Background Tasks > Other Background Tasks > Wired Client Status
Last Execution Information
Start Time
End Time
Elapsed Time (Seconds)
Result
Message
2014-Jan-14, 18:07:57 SAST
2014-Jan-14, 18:08:10 SAST
12
Failure
java.lang.NullPointerException
2014-Jan-14, 20:08:10 SAST
2014-Jan-14, 20:08:25 SAST
15
Failure
java.lang.NullPointerException
2014-Jan-14, 21:26:31 SAST
2014-Jan-14, 21:27:08 SAST
37
Failure
java.lang.NullPointerException
2014-Jan-14, 21:37:22 SAST
2014-Jan-14, 21:37:44 SAST
21
Failure
java.lang.NullPointerException
2014-Jan-14, 21:46:33 SAST
2014-Jan-14, 21:46:56 SAST
22
Failure
java.lang.NullPointerException
Task Details
Description
Wired client status polling
Enabled
Enabled
Interval
(Hours)
Major Polling
Time of Day
(hh:mm)
Time of Day
(hh:mm)

Hi ,
Prime infrastructure uses MIB to collect the Mac address of the clients; this MIB collects
the information per vlan.
So we need to configure SNMP context for all vlans to view the wired client.
Try configure SNMP context on devices , then delete and re-add the device and check the issue.
For e.g:
snmp-server group gcobergroup v3 auth context vlan-1
snmp-server group gcobergroup v3 auth context vlan-71
Thanks-
Afroz
****Ratings Encourages Contributors ***

Cisco nexus 6001 not a supported device on cisco prime infrastructure 2.1?

I have installed Cisco Prime Infrastructure 2.2 and Prime Infrastructure still doesn't seem to support the Nexus 6001 platform? Can someone tell me if Cisco Prime Infrastructure will ever support the Cisco Nexus 6001 platform or is there any plans to support it in any future device packs?

The Nexus 6001 isn't currently supported in PI 2.1. There's no workaround except to wait for a device or product update that adds support. Right now I know the 9000 series is on the 2.2 roadmap but I haven't seen any reference to the 6001 and PI.
Interestingly, Prime LMS does support both the 6001 and 6004. Reference.

Cisco Prime 2.0 - Nexus clients not discover

Similar Messages

Maybe you are looking for