Cisco Prime 2.1 - Collection Failure 2950 Series Switch

Hi All,
I am trying to add various devices in the Cisco Prime Infrastructure 2.1, but with the followings I get a message: Collection Failure (Inventory Collection Status).
Cisco Catalyst 2950 24 Switch
Cisco Catalyst 2950G 24 EI DC Switch
¿Why I can't sync this devices?
Kind Regards!
JEFFERSSONQG

Leo,
I think you are not correct ...
( to be truth - I hope it ;- ) )
in PI 2.2 the Cat 3550 is listed under the supported devices whereas the Cat 2950, 2955 are not:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/release/notes/cpi_rn.html#pgfId-43885
But the latter are listed as being supported in PI 2.1 (while the Cat 3550 is not...)
http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/supported/devices/pi21-supported-devices-list.xlsx?mdfid=284540974
So hopefully it is just a matter of time to get them ALL on the list of supported devices for the current version of PI 2.2 ...
I just saw that for Prime Network (Management SW for Service Providers) they even have Cat 3500XL on the list of supported devices... (but I do not know for which type of management they do support these devives, e.g. config, alarming,etc)
http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/prime/network/4-2/supported/vnes/CiscoPrimeNetwork-4-2-SupportedCiscoVNEs.pdf

Similar Messages

Is it possiable to run image for cisco 3550 PWR-SMI on c3500 XL series switch?

Hi,
as you know cisco 3500 XL switches are L2 switches and there is no ios image which supports L3 functionality compiled for that devices, but what will happen if I'll try to run C3550-IPBASEK9-M image on 3500 XL series switch?
Will it boot up?
Will the SVI functionality be available?
Thank you,
Edik.

The 3550 is a different hardware family so I think you'll find that the 3500XL will likely not boot up with a 3550 image.

Cisco Catalyst 3750-X or 3560-X Series Switches

Recently, our company was deciding to buy Cisco switches, but they just tell the requirements and I finally focused on two kinds of switches, Cisco Catalyst
3750-X or 3560-XSeries Switches? Who can tell me, tnx in advance.

As I read a blog recently, it listed the specific differences between Cisco 3750-X and 3560-X, except for the common features of Cisco 3750-X and 3560-X, Cisco 3750-X can also offer-- Cisco StackPower technology: An innovative feature and industry first for sharing power among stack members;
Cisco StackWise Plus technology for ease of use and resiliency with 64 Gbps of throughput;
Investment protection with backward compatibility with all other models of Cisco Catalyst 3750 Series Switches.
And made a more detailed comparison between the two products, for ur reference.

Cisco Prime 2.0 - Interface failure

Last week I setup PI 2.0 on an ESX server using the OVA template. I can access the PI through the WebGUI without issue.
Because of our network topology, I need to use 3 interfaces to properly manage our environment. Through vCenter, I added 2 additional interfaces, and rebooted the server. All three interfaces show up properly in the CLI as well as in the GUI. I configured all three itnerfaces with the appripriate IP addresses, and configured a single default gateway out interface Gi 0.
Gi 1 connects to our TACACs server as well as our swith infrastructure. Gi 2 connects to our WLAN infrastrcuture, and will be used to manage WISM2s (and the WLAN controllers in the new 4500 SUP-8 when the software gets released).
I managed to setup TACACS to our old ACS 4.2 server thgough Gi 1, as well as add a couple of switches to PI.
I could not however add the WISM2 through int Gi 2 (PI and controller in the same subnet). I could ping the controller from the PI, and viceversa, but could not poll the device, not access it via SSH.
After hours of troubleshooting and getting now where, I swapped interface Gi 1 and Gi 2, and reconfigured the IP addresses appropriatly, i.e. Gi 1 is now conencted to the WLAN infrastrcture, and Gi 2 connected to the switch infrastrcture.
After the change I could no longer access the PI using TACACS, nor could I update or add any devices connected through Gi 2. They still show as reachable (as I beleive the reachability is ICMP-based), but that's it. I had no issues connecting the WISM2 to the PI once the WLAN mgmt interface was moved to Gi 1.
Does anyone know of any restrictions in PI regarding the number of supported interfaces? I search bug tracker and the documentaiton, and could nto find anything related.
My only conclusion is that PI 2.0 does not properly support more than 2 interfaces.
Has anyone else run into this "feature"? Any advice would be appreciated.

Did you add "ip route" statements for the additional NICs?

Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure?

Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure 1.2?

SF300 series is targeted for support in PI 2.0.

Cisco 2950 l2 switch console problen

Hi all, I got 2 old Cisco 2950 catalyst switch yesterday. But when I try to open console of both switches I am getting only blank terminal. I tried to open with putty and scureCRT, I tried another console cable, tried on another PC, but no luck.
I think previous owners might have disabled console. So is there any other way to take console or delete start-up conf file??

Hello,
I don't have a 2950 around to test, but as far is I know disabling the console is achieved issuing the "no exec" command on the console line, so it is a command in the start-up config. Therefore booting the switch in the rescue image should not take into account that command, so the console should be available in that mode. Have you tried that? To do so hold down the MODE button located on the left side of the front panel, while you reconnect the power cable to the switch. Release the Mode button after approximately 5 seconds when the Status (STAT) LED goes out. When you release the Mode button, the SYST LED blinks amber.
Here is the rest of the procedure:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/12040-pswdrec-2900xl.html
PS: I presume you are using the correct COM port and terminal settings, however I mention them bellow just to make sure:
Bits per second (baud): 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: Xon/Xoff (or none, in some documents)
You can check if you are using the correct COM port in System Tools/Device Management if you are using a Windows device.
If this doesn't work check if the flash card can be removed (not sure on that old model), perhaps you can use it in other device and delete the startup config.

Catalyst switch model 2950 series need ios image flash is unable to load.

Hi, i'm in need of ios image for cisco 2950 series switch, because when its boots up its shows me a error message, Error loading "flash:c2950-i6q412-mz.121-13.EA1.bin"

when switch gets reload its show me this message.....
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 1 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1536
flashfs[0]: Bytes available: 7739904
flashfs[0]: flashfs fsck took 4 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image

Cisco Prime Infrastructure - Is there a report of unused switch ports?

Hello,
Is there a report in Cisco Prime Infrastructure 1.4 showing the unused switch ports?
There used to be one in Cisco Prime LMS (Reclaim Unused Up/Down Ports Report).
Thank you,
Luke

Hello,
I now have Cisco Prime Infrastructure 2.0 running, and I don't see a report like the "Reclaim Unused Up/Down Ports" report that existed in LMS.
I found one called "Interface Capacity", but it only shows the number of ports that are "connected", "notconnect" or "disabled".
Does anyone know if a report of Unused ports exists in Prime Infrastructure 2.0 or if it will be available later on?
Thank you,
Luke

Cisco Prime Infrastructure 2.2: Catalyst 2960X-24TS-LL Switch Collection Failure

Hello,
I've Upgraded Prime Infrastructure to Version 2.2.0.0.158. Now our Catalyst 2960X-24TS-LL switches show an error message, when they are added to the inventory. The error is as follows:
Partial Collection Failure; Collection Status : Failed feature(s).
The 2960X-24TS-LL is listed under the supported devices list and other switches (e.g. WS-C2960X-48FPS-L) got inventorized without any problems.
Did anybody see this issue and can tell me how to solve it.
- Benjamin

- Getting that one too, since running 2.2 (Failed Features) ; suggest opening a TAC case.
M.

Cisco Prime 2.1- Partial collection failure

Dear Experts,
We are seeing many devices (around 1000+ devices) showing as "partial collection failure". We found this coz of not updated Telnet/SSH Cli username and password. So instead of editing each and every device, is there any way to select all devices and update cli credentials in one shot..?
If someone helps me this option, it will be so helpful.

Hi ,
Other way is to export all the devices , Edit it and then Import it.
Operate >device workcenter > EXPORT device \ BULK IMPORT
Thanks-
Afroz
****Ratings Encourages Contributors ****

PI2.1: collection failure with all 2950

Hello
I have all Switches 2950 with The collection status "collection failure".
PI version is 2.1
OID of 2950 is : 1.3.6.1.4.1.9.1.324 : Catalyst295024
Software version is : flash:/c2950-i6q4l2-mz.121-20.EA1a.bin
--> Should be supported by PI2.1
If I hit the detail of the "collection status detail" , I have this error message:
"An unexpected error occured"
# Check the device is in supported device list in deployment guide --> Yes !
# Check the device credentials provided are valid --> Yes !
# Finally if the problem still persists then contact Cisco System's technical assistance center
I tried to change the snmp timeout, and also to use snmpv1.
In the inventory.log, I have this first ERROR message:
[2014-05-14 15:26:42,420] [ICE Service[ 1]Thread: 8] [ice] [ERROR] - java.lang.IllegalStateException: Business key attribute: name on entity com.cisco.xmp.model.managed.vendorSpecificTechnologies.cisco.accessControlList.IpAce is null.
java.lang.IllegalStateException: Business key attribute: name on entity com.cisco.xmp.model.managed.vendorSpecificTechnologies.cisco.accessControlList.IpAce is null.
And finaly:
[2014-05-14 15:26:42,826] [ICE Service[ 1]Thread: 8] [inventory] [INFO ] - Complete inventory for deviceid 2300304 ...
Could you please help me.
Michel Misonne

Leo,
I think you are not correct ...
( to be truth - I hope it ;- ) )
in PI 2.2 the Cat 3550 is listed under the supported devices whereas the Cat 2950, 2955 are not:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/release/notes/cpi_rn.html#pgfId-43885
But the latter are listed as being supported in PI 2.1 (while the Cat 3550 is not...)
http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/supported/devices/pi21-supported-devices-list.xlsx?mdfid=284540974
So hopefully it is just a matter of time to get them ALL on the list of supported devices for the current version of PI 2.2 ...
I just saw that for Prime Network (Management SW for Service Providers) they even have Cat 3500XL on the list of supported devices... (but I do not know for which type of management they do support these devives, e.g. config, alarming,etc)
http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/prime/network/4-2/supported/vnes/CiscoPrimeNetwork-4-2-SupportedCiscoVNEs.pdf

Prime Infrastructure 2.1 ASA5580- Security Context Partial Collection Failure

I am attempting to add my ASAs into prime but get stuck almost instantly after adding the new device. Prime is able to get the device name and Device type (Cisco ASA-5580 Adaptive Security Appliance Security Context) Admin status shows up as Managed but Inventory Collection Status shows up as "Partial Collection Failure" For more detail it says "feature_image_firewall Unexpected error. See the log file inventory.log for details."
The only failure in inventory.log I could find was
[2014-09-26 12:40:01,868] [ICE Service[ 1]Thread: 20] [inventory] [ERROR] - 192.168.0.19 For device id: 2848866 Feature = feature_image_firewall and Procedure = ImageFireWal failed in time 45 with the following error and continuing with other features: com.cisco.nm.expression.function.FunctionException: <palError><deviceId>2848866</deviceId><code>HANDLER_ERROR</code><message>Error while trying to run handler. Action : imageFireWall, Handler : com.cisco.nm.pal.customhandler.RPLHandler. Error : Exception thrown : Constraint violation. See log for details.</message><handlerCode>ERROR_HANDLER_ERROR</handlerCode></palError>
[2014-09-26 12:40:01,868] [ICE Service[ 1]Thread: 20] [ice] [ERROR] - com.cisco.nm.expression.function.FunctionException: <palError><deviceId>2848866</deviceId><code>HANDLER_ERROR</code><message>Error while trying to run handler. Action : imageFireWall, Handler : com.cisco.nm.pal.customhandler.RPLHandler. Error : Exception thrown : Constraint violation. See log for details.</message><handlerCode>ERROR_HANDLER_ERROR</handlerCode></palError>
com.cisco.nm.expression.function.FunctionException: <palError><deviceId>2848866</deviceId><code>HANDLER_ERROR</code><message>Error while trying to run handler. Action : imageFireWall, Handler : com.cisco.nm.pal.customhandler.RPLHandler. Error : Exception thrown : Constraint violation. See log for details.</message><handlerCode>ERROR_HANDLER_ERROR</handlerCode></palError>
As far as the ASA config goes:
snmp-server enable
snmp-server host management 192.168.10.27 community c!$c0PR!me version 2c
logging enable
logging history 7
snmp-server enable traps
The above config works on our ASA5520s except I still haven't set up the traps right because there isn't any useful information on those devices so I am not sure what I need to change?

My ASA is using DH 1.
For 9.2(1) I read this in the release notes.
Note The ASA 5510, ASA 5520, ASA 5540, ASA 5550, and ASA 5580 are not supported in this release or later. ASA Version 9.1 was the final release for these models.

Cisco Prime Rogue AP Report - No Rogues from 3702 Series AP's

I am running Cisco Prime Infrastructure (2.1) that manages a Cisco 5508 WLC (7.6). We have multiple version of AP's managed by this WLC to include 1142, 2602, 3702, etc...In Cisco prime when we run a Rogue AP Report. None of the Rogue AP's discovered by 3702's are displayed in the report. The Rogues show on the WLC though from all AP's. Cannot find a reason for this. Any ideas?

The Rogue alarm state always stays on "removed" once deleted
CSCuo91446
Description
Symptom:
Once one of the alarm of rogue AP is deleted the newer rogue AP alarm changed to removed state even for different mac address.
Because of the removed state the detecting AP which detected the rogue is not displayed
Conditions:
1) Auto SPT is turned on
2) Prime 2.0 or 2.1
Workaround:
Click on refresh from network for each alarm in removed state or disable auto spt
Last Modified:
Jun 30,2014
Status:
Fixed
Severity:
3 Moderate
Product:
Cisco Prime Network Control System Series Appliances
Known Affected Releases:
(1)
2.1(0.0.1)

1600 and 2600 series aps no heatmap on cisco prime 1.4.0.45

after plotting 1600 series and 2600 series aps on the respective uploaded maps, there's NO heatmap coming out.
setup composed of:
1600 series aps
2600 series aps
wlc running HA (7.4.121.0)
cisco prime 1.4.0.45
i noticed some errors from prime:
error 1: Exception while computing Coverage Heatmap. Message: COMMON-1 Try Recompute RF Prediction - this error message shows after positioning the aps on the map and clicking save button. it took sometime to display then this error message shows.
error 2: Error in Recompute RF Prediction: SyntaxError:syntax error - this error shows after running recompute rf prediction option
i tried 802.11a/n and 802.11b/g/n protocols but still no heatmap. i tried unselecting ap heatmaps option and select it again but still no heatmap.
anybody have an idea what is going on? tia

Hi,
Try removing both APs from the map and saving. Next, go back into the map an assign the APs. If they still do not map then I would look at the traps on the controller and make sure that the AP is fine. I would also look at performing an on demand refresh from the controller to the WCS. You can do this from the management page in WCS.

Prime Infrastructure 2.0: Inventory Collection - Partial Collection Failure on 2 of 4 VSS WS-C6509-E

Hello,
I've got a strange behaviour regarding the inventory collection for 2 of 4 virtual switching systems.
That means the inventory collection for two VSS is succesfull (inventory collections status = Completed) for the other two systems it is not, see attachments.
The device credentials like SNMP-RW, SSH acces are OK. I've already tried to increase SNMP timout and retries as well as telnet/ssh timout without success
All 4 systems are identical regarding hardware model and software vesion.
HW: WS-C6509-E
SW: 12.2(33)SXJ3
Any ideas or suggestions?
Best regards,
Bastian

TAC and I found a bug, CSCum05301.
May be that is also helpfull for others.
https://tools.cisco.com/bugsearch/bug/CSCum05301/
Symptom:
Inventory collection will fail if following keywords are used as part on description command on the interface config level of IOS device: 1Gbps, 10Mbps etc.
Following error message is visible on the DWC:
Inventory Collection Status: Partial Collection Failure
Collection Status Failed feature(s)
Unable to configure DSL, Serial, POS, Ethernet, Loopback, Virtual-Interface, Tunnel, Vlan, Switchport and Service Module interfaces on ISR, ASR and Switches.
Conditions:
Speed keywords like 1Gbps, 10Mbps etc. available as part of descrption command in IOS interface level.
For example:
interface FastEthernet0/3
description 10Mbps
Workaround:
Use a space character between number and unit keyword, like 1 Gbps.

Cisco Prime 2.1 - Collection Failure 2950 Series Switch

Similar Messages

Maybe you are looking for