Cisco prime 2.1 not showing wired clients connected to Cisco 3850 switches

Hello All,
I have around 80 Cisco 3850 switches at a customer network and they are using prime infrastructure 2.1.2 to manage these devices. Most of the features are working fine except that the prime does not show the wired clients connected to the switches. The wireless clients are shown properly but not the wired clients. Their core switches are nexus 7k. The SNMP configuration on the switches is as follows.
snmp-server group xxxx v3 priv write xxxx-VIEW-WR
snmp-server view xxx-VIEW-WR mib-2 included
snmp-server trap-source Vlan100
snmp-server host x.x.x.x version 3 priv testuser
Please help me to resolve this issue.
Shabeeb

I managed to get the end hosts connected in 3850 switches with the use of snmp context command. But now the issue is that prime is showing only the mac address of the device , not the IP address.
Is there anyway to resolve this issue?

Similar Messages

WRT54G v6 client table not showing wired clients

I have a WRT54G v6 using the lastest firmware. Is there any 3rd party software that can display what clients I have on my network? The reason I'm asking is because my router will only show the wireless clients and not the ones connected on the wired side. Other than that everything works fine.

I have similar problem. DHCP client table shows only wireless laptops using dynamic ip address. All my wired destop (dynamic ip), and other static ip devices both wired or wireless do not show up in DHCP client table. Any idea? I have v8.

Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Cisco Prime Soft Appliance not saving changes to syslog.conf

Greetings,
I'm having an issue with the syslog.conf file on a Cisco Prime LMS 4.2.4 soft appliance with a Solaris base. My workplace uses local4 as the logging facility for its network devices, and according to a discussion I found on this site, I need to add the line:
local4.info /var/log/syslog_info
I have attempted this several times; we're approaching at least 5 attempts today. I have attached text files created from putty logs where I've attempted to make the necessary change. I appreciate any assistance the community can provide.
Regards,
Rob

Hi, Afroz,
I really appreciate your assistance, but I'm afraid my hopes have been dashed. The syslog.conf reverted to its original configuration. I will go through my steps to be sure that I understood your suggestion properly.
I edited the syslog.conf to put all messages from local4 in /opt/CSCOpx/conf/syslog-entries.txt. Then, I exited the shell to the console, issued the 'write mem' command, and closed the session. Upon my reconnection, I found that my changes to the syslog.conf were not saved.
Did I make the correct edits in the correct places? Another question, is this bug present in the versions of Prime LMS running Linux and/or Windows, or does it only exist in the soft appliance running Solaris?
Regards,
Rob
Edit:
I'm reading the "Installation and Migration of Cisco Prime" PDF, and it gives me the impression that Cisco Prime is only supported as Windows, Solaris, and soft appliance installations. Is that correct? If it is correct, then installation of Cisco Prime LMS is not supported on other Linux distros such as Ubuntu Server, CentOS, Fedora, etc.?
My thanks.

CLI does not show on secondary line in cisco 9971 through MGCP CO line

Hi,
There's an issue that CLI does not show on secondary line in cisco 9971 through MGCP CO line. Only the calls that are getting to the first line shows CLI.
It shows as "unknown number" when it's getting a call to the secondary line ( MGCP CO line).
Has anyone faced this issue?
Please help to resolve.
Thanks & Regards,
Achintha

Don't use TimeLines. Log-in to the Adobe Exchange with your
Widget Browser ~ http://labs.adobe.com/technologies/widgetbrowser/
jQuery & Ajax Slideshows from Adobe Exchange:
    * jQuery Cycle Widget
    * Lightbox Gallery Widget
    * Spry Content Slideshow
    * Spry Image Slideshow
As to your layout problems, we still need a link to your page.
Free host for testing: http://www.000webhost.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

ORA-12518: TNS:listener could not hand off client connection

guys,
i have a problem here with the connection between a client host and a server database, using a new non-default listener LISTENER_BKP_1. The error showed is:
ORA-12518: TNS:listener could not hand off client connection
i had learned about this error here before, and i toke some notes as follows:
h2. listener.log
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-SEP-2009 01:23:49
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oracle\product\10.2.0\db_2\network\admin\listener.ora
Log messages written to C:\oracle\product\10.2.0\db_2\network\log\listener_bkp_1.log
Trace information written to C:\oracle\product\10.2.0\db_2\network\trace\listener_bkp_1.trc
Trace level is currently 0
Started with pid=2212
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WINXP)(PORT=1523)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
25-SEP-2009 01:24:39 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=PAULO))(COMMAND=services)(ARGUMENTS=64)(SERVICE=listener_bkp_1)(VERSION=169869568)) * services * 0
25-SEP-2009 01:24:49 * (CONNECT_DATA=(SERVICE_NAME=financeira.winxp)(CID=(PROGRAM=C:\ORACLE?instantclient_10_2\sqlplus.exe)(HOST=PAULO_NOTEBOOK)(USER=ORACLE_DBA))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.100)(PORT=51649)) * establish * financeira.winxp * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-SEP-2009 01:24:53 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=PAULO))(COMMAND=services)(ARGUMENTS=64)(SERVICE=listener_bkp_1)(VERSION=169869568)) * services * 0
h2. lsnrctl services
C:\>lsnrctl services listener_bkp_1
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-SEP-2009 01:33:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=WINXP)(PORT=1523)))
Services Summary...
Service "FINANCEIRA.WINXP" has 1 instance(s).
Instance "FINANCEI", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:1
LOCAL SERVER
The command completed successfully
h2. listener.ora file
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = FINANCEIRA.WINXP)
(SID_NAME = FINANCEI)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WINXP)(PORT = 1521))
SID_LIST_LISTENER_BKP_1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = FINANCEIRA.WINXP)
(SID_NAME = FINANCEI)
LISTENER_BKP_1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WINXP)(PORT = 1523))
h2. v$resource_limit
RESOURCE_NAME ; CURRENT_UTILIZATION ; MAX_UTILIZATION ; INITIAL_ALLOCATION ; LIMIT_VALUE
processes ; 26 ; 30 ; 150; 150
sessions ; 30 ; 35 ; 170 ; 170
2 rows selected
this means that it didn't reach the resource limites yet. What i can do to solve the problem ???
another important information is that connecting by the default listener LISTENER instead of the LISTENER_BKP_1 listener, the connection is completed successfully. There's enough SGA memory space too.
Tks,

Paulo_BR wrote:
i have a problem here with the connection between a client host and a server database, using a new non-default listener LISTENER_BKP_1. The error showed is:
ORA-12518: TNS:listener could not hand off client connectionDon't do Oracle on Windows, so I'm not sure how the following relates to the Listener dealing with a dedicated server connection request on Linux/Unix.
On Linux/Unix, a dedicated server request means just that - a dedicated process has to be started to service that client. The Listener does it by using the parameters of the configured listener.ora service to execute +$ORACLE_HOME/bin/oracle+. This process then starts up, and the Listener hands off the client connection for this process for servicing.
If there is a failure somewhere on this series of steps fail, the Listener throws the ORA-12518 exception. For example, the +$ORACLE_HOME+ has been incorrectly configured in listener.ora and it fails to execute and startup a dedicated server process.
And this relates to the underlying error you are seeing:
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directoryI think that the Listener on Windows uses the CreateRemoteThread() Win32 call to start up the server process thread. However, it needs a valid process identifier (of the existing Oracle instance) for this call - and thus needs to first identify the Oracle instance process. Could be that this step uses a ORACLE_HOME reference. And if that directory path is not valid, it is unable to identify the process id of the Oracle instance and thus unable to spawn a dedicated thread to service that client.

ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)

Hi again,
I'm on my enterprise management console and Database Instance and Listener shows the green arrow, but the Agent Connection to Instance shows a red downward arrow and the error:
Status: Failed
Details: ORA-12518: TNS:listener could not hand off client connection (DBD ERROR: OCIServerAttach)
My OraClrAgnt service is up and running (using winxp pro, oracle 11gR2), I'm on my home pc, all my ports are open (my machine's name is "abigail" and it is dmzhost)
Any suggestions to resolve this error?
My Tnsnames ora:
ABIGAIL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = orcl.0.0.10)
LISTENER_ORCL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
    (CONNECT_DATA =
      (SID = ORCL)
RMAN =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = rman.abigail)
My listener.ora
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = E:\app\abigail\product\11.2.0\dbhome_1)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:E:\app\abigail\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = ABIGAIL)(PORT = 1521))
ADR_BASE_LISTENER = E:\app\abigail
My SQLNET.ORA
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES, LOCALHOST)
NAMES.TRACE_LEVEL = ADMIN
My alert file
<msg time='2013-10-10T20:47:02.687-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ABIGAIL'
host_addr='::1'>
<txt>10-OCT-2013 20:47:01 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=SYSTEM))(SERVICE_NAME=orcl.0.0.10)) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=38289)) * establish * orcl.0.0.10 * 12518
</txt>
</msg>
<msg time='2013-10-10T20:47:02.687-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ABIGAIL'
host_addr='::1'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
</txt>
</msg>
My listener status and services
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                10-OCT-2013 22:47:58
Uptime                    0 days 0 hr. 2 min. 1 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\app\abigail\product\11.2.0\dbhome_1\network\admin\l
istener.ora
Listener Log File         e:\app\abigail\diag\tnslsnr\ABIGAIL\listener\ale
rt\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.0.0.10" has 1 instance(s).
Instance "orcl", status READY, has 8 handler(s) for this service...
The command completed successfully
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "orcl.0.0.10" has 1 instance(s).
Instance "orcl", status READY, has 8 handler(s) for this service...
    Handler(s):
      "D006" established:0 refused:0 current:0 max:800 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 1312>
         (ADDRESS=(PROTOCOL=tcps)(HOST=ABIGAIL)(PORT=1060))
      "D005" established:0 refused:12 current:0 max:800 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 1288>
         (ADDRESS=(PROTOCOL=tcps)(HOST=ABIGAIL)(PORT=1061))
      "D004" established:0 refused:1 current:1 max:16383 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 1260>
         (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1063))
      "D003" established:0 refused:1 current:1 max:16383 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 1140>
         (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1062))
      "D002" established:0 refused:1 current:1 max:16383 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 140>
         (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1059))
      "D001" established:0 refused:1 current:1 max:16383 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 1072>
         (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1057))
      "D000" established:0 refused:1 current:1 max:16383 state:ready
         DISPATCHER <machine: ABIGAIL, pid: 748>
         (ADDRESS=(PROTOCOL=tcp)(HOST=ABIGAIL)(PORT=1058))
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
The command completed successfully

I added this on my listener.ora
DIRECT_HANDOFF_TTC_LISTENER=OFF
Works now!
Moral of the story, google is ur friend lol. Thanks for the reply tho!

[HELP] 10g error TNS-12518: TNS:listener could not hand off client connecti

Hi all,
TNS-12518: TNS:listener could not hand off client connection
(when I do a sqlplus, it hangs for one two minutes, then the error above shows)
My oracle 10g is installed in a windows system. this error only happens when the database is heavily used for some time. After I restarted the Listoner, the connection is ok again. Does anyone has a solution for this? Thanks a lot.
Jason

Monitor your page file usage on Windows system (I assume its a 32 bit machine). When Windows starts to swap Oracle SGA into page file., you encounter TNS errors. Strange but we have observed this.
If you can allocate more free physical memory on the server (by removing unwanted applications from the memory), then you can reduce these errors.
Permanent solution would be to add more physical RAM (with 4GT on 32 bit) or switch to 64 bit architecture.
Message was edited by:
Satish Kandi
Typo corrected and added following.
You can set DIRECT_HANDOFF_TTC_LISTENER=OFF in listener.ora and restar the database as temporary solution. Check metalink Doc ID: 233747.1

TNS-12518: TNS:listener could not hand off client connection TNS-12547

Hi guys,
I have started my listener from 10.2.0.5 home , which was in 10.2.0.4.
from that point am having issue connect to 10.2.0.4 databases which are in restricted session(DR db)
when I try to connect to databases which are in restricted session it says TNS connection closed. databases which are open am able to connect.
listener.log shows
TNS-12518: TNS:listener could not hand off client connection TNS-12547: TNS:lost contact TNS-12560: TNS:protocol adapter error TNS-00517: Lost contact Solaris Error: 32: Broken pipe
any idea why its happening.

902988 wrote:
Hi guys,
I have started my listener from 10.2.0.5 home , which was in 10.2.0.4.
from that point am having issue connect to 10.2.0.4 databases which are in restricted session(DR db)
when I try to connect to databases which are in restricted session it says TNS connection closed. databases which are open am able to connect.
listener.log shows
TNS-12518: TNS:listener could not hand off client connection TNS-12547: TNS:lost contact TNS-12560: TNS:protocol adapter error TNS-00517: Lost contact
Solaris Error: 32: Broken pipeOS/Networking misconfiguration.
Oracle is victim; not culprit.
Root cause & solution is external to Oracle
How many different DB versions installed on this system?
post results from following OS command
env | sort
Handle:     902988
Status Level:     Newbie
Registered:     Dec 17, 2011
Total Posts:     7
Total Questions:     4 (4 unresolved)
Why post here when you NEVER get any answers?
Edited by: sb92075 on Apr 13, 2012 1:12 PM

TNS-12518: TNS:listener could not hand off client connection

All,
I am getting the below error while connecting the db from client.it is a shared server and also have enough free memory.
The db version is : 9.2.0.6
TNS-12518: TNS:listener could not hand off client connection
TNS-12547: TNS:lost contact
TNS-12560: TNSrotocol adapter error
TNS-00517: Lost contact
Solaris Error: 32: Broken pipe
Please suggest me on this to avoid the issue.

When was last time SQL*Net worked?
What changed since then?
Solaris Error: 32: Broken pipeError occurs at Operating System level & Oracle is the victim.
What clues exist in the messages file?

10.1.3 EA1: ORA-12518, TNS:listener could not hand off client connection

Hi,
Trying to connect to a remote database which worked in 10.1.3 developer preview gives now:
Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
From sqlplus I can connect. I don't have access to the remote database server/configuration. I tried the workarounds specified here
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=139775.1
I deleted
ojdbc14dms.jar ojdbc14.jar
from jdeveloper and copied ojdbc14_g.jar from Oracle 10g release1 (renamed it to ojdbc14.jar). Then it worked.

Hi,
Can you please check the below link from the forum too.
ORA-12518 Tns: Listener could not hand off client conenction
Best regards,
Rafi.
http://rafioracledba.blogspot.com

Not showing a secure connection

in firefox 4 its not showing when im connected to a secure connection like in previous versions

The padlock has been replaced by the site identity button, for details on using it see https://support.mozilla.com/kb/Site+Identity+Button
If you want to add a padlock icon to the location bar, you can use the Padlock add-on - https://addons.mozilla.org/firefox/addon/padlock-icon/

TNS:listener could not hand off client connection

while trying to select from dblink I got ORA-12518: TNS:listener could not hand off client connection
What should I do?
here is the listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = disater)(PORT = 1521))
)

What is the operating system and database version for remote and local machines.
Are you using dedicated or threaded server on the remoted DB. More information is needed.
output from error message search:-
12518, 00000, "TNS:listener could not hand off client connection"
// *Cause: The process of handing off a client connection to another process
// failed.
// *Action: Turn on listener tracing and re-execute the operation. Verify
// that the listener and database instance are properly configured for
// direct handoff. If problem persists, call Oracle Support.
// *Comment: The problem can be worked around by configuring dispatcher(s)
// to specifically handle the desired presentation(s), and connecting
// directly to the dispatcher, bypassing the listener.

TNS-12518: TNS:listener could not hand off client connection, XE 10g/WinXP

I've installed Oracle XE 10 on Windows XP. When I browse to the database homepage, I get this in listener.log:
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
08-FEB-2012 01:07:24 * service_register * xe * 0
08-FEB-2012 01:07:24 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1702)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
I don't think it is shortage of resources (just rebooted). I put "DIRECT_HANDOFF_TTC_LISTENER=OFF" in listener.ora .. no luck. I removed the listener.ora file altogether ... ditto.
What else could cause this?
Steve

I can connect from SQLPlus. Laptop has 3 GB RAM.
===== set =====
C:\Documents and Settings\shawes>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\shawes\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=shawes-us
ComSpec=C:\WINDOWS\system32\cmd.exe
DEFLOGDIR=C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\shawes
JDEV_USER_DIR=D:\JDeveloper\mywork
LOGONSERVER=\\shawes-us
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\
ThinkPad\ConnectUtilities;C:\Program Files\TortoiseSVN\bin;C:\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 37 Stepping 2, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=2502
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\shawes\LOCALS~1\Temp
TMP=C:\DOCUME~1\shawes\LOCALS~1\Temp
TPCCommon=C:\PROGRA~1\THINKV~1\PrdCtr
TSMPATH=C:\Program Files\ThinkPad\UltraNav Utility
USERDOMAIN=shawes-us
USERNAME=shawes
USERPROFILE=C:\Documents and Settings\shawes
VSEDEFLOGDIR=C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
windir=C:\WINDOWS
===== lsnrctl stat =====
C:\Documents and Settings\shawes>lsnrctl stat
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 08-FEB-2012 23:55:53
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 08-FEB-2012 19:32:02
Uptime 0 days 4 hr. 23 min. 53 sec
Trace Level user
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Listener Trace File C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SHAWES-US.us.oracle.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully

Bring back ability to see "Wired" Clients connected to Timecapsule in Airport Utility

Hi Apple,
Can you please bring back ability to see "Wired" Clients connected to Timecapsule in Airport Utility for iOS and Mavericks.
Thanks
Shawn

http://www.apple.com/feedback/
Tell Apple about your request. This is a discussion forum for users, and Apple isn't here.
Hugh

Cisco prime 2.1 not showing wired clients connected to Cisco 3850 switches

Similar Messages

Maybe you are looking for