Cisco Prime Collaboration Assurance Standard

Hi All,
We have recently deployed Cisco Prime Collaboration Assurance Standard Server. The issue that I am facing is that after some time the server collapses and logs me out, even though I can connect via the cli.
The version of prime we are using is : 10.5.1.53684.
I am attaching some logs that I got from the cli mostly related to apache.
Has someone faced this issue?
Thanks
Hassan

Hi Aman,
Thank you I will have a look at the bug. I was following the troubleshooting document and as compared to that document the service running when I do a sh application status cpcm are a lot less.
http://docwiki.cisco.com/wiki/Troubleshooting_Cisco_Prime_Collaboration#How_to_verify_the_Cisco_Prime_Collaboration_Assurance_installation_.28for_advanced_and_standard_modes.29.3F
STAT   PID USER     COMMAND             ELAPSED
===============================================
SNl   1119 root     emsam_perfmonen       12:50
S<l   1288 root     emsam_tomcat          12:39
SNl   1400 root     emsam_poller          12:16
SNl   1625 root     emsam_fault           11:56
S<l  32045 root     Decap_main            14:41
SN   32164 postgres postgres              14:40
SN   32274 primea   postmaster            14:29
SNl  32317 root     emsam_mq              14:12
SNl  32380 root     cpc_multiproclo       14:04
SNl  32414 root     emsam_inventory       14:04
Regards
Hassan

Similar Messages

  • Cisco Prime Collaboration Assurance _ Web login

    I have recently deployed Cisco Prime Collaboration Assurance standard within our Vmware environment with the view to evaluate and deploy into production.
    I have successfully deployed within the environment and can log into the appliance via SSH via the root, admin and globaladmin account however when I try to login through the Web Gui with the above accounts, i am getting the " invalid username or password" error.
    Can anyone provide guidance please 
    Peter

    Hi Peter,
    Never faced such issue.
    Look into the bugs if helps.
    PC 9.0 After restore from backup, cannot login - invalid password
    CSCui00260
    Description
    Symptom:
    cannot log in to the GUI with any known username/pw including globaladmin account.
    tomcat logs will show 'untrusted certificate' errors.
    Conditions:
    seen after a fresh restore from backup on a new server.
    Workaround:
    contact BU for workaround.
    Assurance password for globaladmin with * at end or beginning fails
    CSCue81630
    Description
    Symptom:
    User 'globaladmin' is unable to login to Prime Collaboration Assurance
    Conditions:
    The password for 'globaladmin' contains '*' at the beginning or end of the password
    Workaround:
    Do not use '*' character at the beginning or end of the password
    regds,
    aman

  • Cisco Prime Collaboration Assurance

    Hello Guys,
    I'm tryng to implement a Cisco Prime Collaboration Assurance on a costumer, but it does not create the phones inventory.
    The UC Cluster nodes are already managed.
    I've followed some Cisco Guides to set this up, and it is not working.
    http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-collaboration/guide-c07-732215.html#_Toc394127247
    http://docwiki.cisco.com/wiki/Setting_up_Devices_for_Prime_Collaboration_Assurance
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-5/assurance/standard/guide/Cisco_Prime_Collaboration_Assurance_Guide_Standard_10_5.html
    Please, how the PCA discover the Cisco IP Phones and endpoints?
    I'm working with a Prime Collaboration Assurance 10.5 Advanced License. All the UC nodes are on 10.5 version.
    Thanks in advance and best regards.

    Hi Pedro,
    I am fine.
    thanks for the ratings.
    What I could find that this could be again the bug but not sure since I  never came across this issue when worked on PCA 9.x?
    Data sorting issue in Trunk Utilization & Location CAC bandwidth
    CSCur69981
    If TAC case is still opened, you can speak to him about this issue as well.
    there is a similar discussion on E1 channel but could not be resolved.
    https://supportforums.cisco.com/discussion/12297036/cpc-assurance-not-showing-e1-cas-channel-status
    regds,
    aman

  • Cisco Prime Collaboration Assurance IPPhone 3901 no serial number report

    Hi All,
    I have installed Cisco Prime Collaboration Assurance in my office and try to create phone inventory report , so far no problem , but when i add IPPhone 3901 there no serial number in the report , I have enable web access on the phone , i can see the serial number by click the IP  .
    any help ?
    Best Regards,
    Tommy

  • Cisco Prime Collaboration Assurance - INACCESSIBLE

    Hi,
    I setup a testing Cisco Prime Collaboration Assurance (CPCA) with Advanced version, which connected with two CM clusters both is the 10.5 version.
    The result is one CM cluster can be monitored, but the second CM cluster cannot be monitored. The fail CM showed the Discover Device on CPCA as the below error: (Showed one of EX90 cannot be accessed, then all devices cannot be monitored?)
    One CM success: (CM1 assurance domain)
    Second CM fail: (CM2 assurance domain)
    Any idea on that?

    Hi,
    Just a guess:
    check for snmp ports being blocked for this cluster across firewall.
    regds,
    aman

  • Cisco Prime Collaboration Assurance 10.0 | CDR Issues

    Hello,
    I'm trying to configure my CUCM 10.0 to send CDR record to my Cisco Prime Collaboration 10.0, but the CUCM can't connect to the SFTP in the Cisco Prime.
    I tried connect to other SFTP client, but unsuccessful, too. I have received "invalid username or password" response.
    I can connect the port 22 and 26, by command prompt for example. I followed all the steps of the "Deployment Guide", but I can't add the Cisco Prime in CUCM.
    Thanks a lot
    Eduardo Lassance

    Hi Edu,
    In Prime Assurance , under Adminstration ---system setp ---assurance setup ---sftp settings , in username [smuser] , can u re-enter the password , apply and then, check.
    regds,
    aman

  • Cisco Prime Collaboration Assurance SNMP authentication

    Hello
    i see in Cisco Prime Collaboration the following minor alarms:
    Description=SNMP entity has received a protocol message that is not properly authenticated
    2014-10-16 13:37:09    Local7.Critical    62.25.80.199    Oct 16 13:37:06 HCCPCA3A CPCMHCCPCA3A:%local7-2-ALARM: 14$Description=SNMP entity has received a protocol message that is not properly authenticated.::Status=1,active^Severity=minor^Acknowledged=no^AlarmURL=https://62.25.80.199/emsam/index.html#pageId=com_cisco_ifm_web_page_alarms&queryParams=Id%3D31755519&forceLoad=true^Associated Events=https://62.25.80.199/emsam/index.html#pageId=com_cisco_ifm_web_page_alarms&queryParams=alarmId%3D31755519&tView=events^Device Work Center=https://62.25.80.199/emsam/index.html#pageId=com_cisco_emsam_page_inventory&deviceId=3827396^CUSTOMER=CUSLAB08^Private IP Address=172.29.15.5^Default Alarm Name=MinorAlarm^Managed Object=172.29.15.5^Managed Object Type=Contact Center Enterprise^MODE=2;Alarm ID=31755519^Component=172.29.15.5<000><000>
    i know i can suppress the alarms, but can anyone tell me why this is generated?  how is it when Cisco PCA can manage the device, i get authentication issue on SNMP v2c ?
    thanks in advance

    Hi Phil,
    Even I am facing this issue.
    The server is in managed state in Device Work Center. But still observing the Alarm " SNMP  entity has received a protocol message that is not properly authenticated.".
    Also it takes 15 to 20 minutes for an alarm to get cleared. 
    Thanks,
    Dinesh

  • Cisco Sensor 1040 and Cisco Prime Collaboration Assurance 9.0

    Hey Guys,
    We have setup Cisco Prime CA and trying to hook a Sensor onto it. The sensor is searching for a few.cnf files over tftp. Where can i find these files ?
    PS: if this is the wrong place please tell me where to post this.
    Thanks
    Varadarajan.R

    Hello Varda,
    It seems as the 1040 sensors are not finding the TFTP server. The TFTP server list should not contain the ipaddress with values 32 or 92 in their octets,
    1. The 1040 needs to learn of the TFTP by DHCP option 150.
    2. Please make sure that it is set on your DHCP server. 
    3. To confirm that the 1040 sensor is receiving the TFTP IP open a web browser and type http://  and see if the TFTP address field is showing the IP. 
    4. If it is then you might also need to restart the TFTP service on the CUCM so that the 1040 can download the cnf and image files.
    Attached is the userguide for 1040. Go through it and this should be able to resolve your issue.
    This is a other  method to check the  sensor  is fine
    Fist step install  download winagents tftp server ,
    enter a Service Monitor Server   Configuration / sensor1040 and in TFTP server  enter    ip address(winagents tftpserver) and go to SETUP
    in setup   put you ip address in PRIMARY SERVICE MONITOR  and push OK   you look the server write file in (TFTP server )
    Next STEP
    Go to MANAGEMENT   and  add new sensor you need mac address remember second port in sensor is span port you can make a sencond file in the tftp server
    Next STEP
    go to service monitor server and copy  file *.img CSCOpx/
    Next STEP
    Search  you dhcp server switch     option 150 in put your ip address tftp server when sensor power off  and power on the sensor search tftp server and search files to autoconfig and register to service monitor when test is ok
    its time to upload change winagent tftp server to  callmanager tftp server
    Hope this helps
    Thanks & Regards,
    Venkitesh

  • Cisco Prime Collaboration Usage

    Hi,
    Many Asia costumers complain it is very difficult to maintain the Cisco Collaboration system.
    So we are considering the Cisco Prime Collaboration system, see which can help or not.
    I have few questions about the Cisco Prime Collaboration Provisioning (CPCP) for SME customer / Cisco Prime Collaboration Assurance (CPCA) for Big customer.
    1. CPCP Standard version is free? one cluster? no adv. features? What is the adv. features on adv. versions?
    2. I see the CPCP will deploy the new configurations into the CM clusters, that is fine on the new CM, but the existing CM will access the CPCP push into new configurations? Any impacts will happen on delopying the new CPCP into the existing CM?
    3. CPCA lic. counted by every end devices, that is really expensive. Any cost effective methods to deploy the CPCA?
    4. If we want to monitor the TP endpoints or DX video phones, I have to plug the lan to the 37XX or above switches? 29XX cannot? 
    Medianet-Capable Devices
    Feature
    Routers
    Switches
    Cisco IOS®Software Release Supported
    Mediatrace 1.0
    Cisco 1800, 2800, 2900, 3800, 3900 Integrated Services Routers
    Cisco Catalyst® 3560E, Catalyst 3560X, 
    Catalyst 3750, 
    Catalyst 3750-Metro (only 12.2SE),
    Catalyst 3750E, and
    Catalyst 3750X
    12.2SE
    15.0SE
    15.1T
    15.1M
    IP service-level agreement (SLA) video operation
    Routers will be supported soon. Please check the feature navigator as mentioned below
    Cisco Catalyst 3560E, Catalyst 3560X, Catalyst 3750, Catalyst 3750E, and Catalyst 3750X
    12.2SE
    15.0SE

    Hi,
    Been out of the office but see that no one has yet responded to this. I can answer some of the questions.
    1. CPCP Standard version is free?
    CUCM 10+ users are entitled to use the Standard version.
     one cluster?
    Yes
     no adv. features?
    Not missing a lot, especially for smaller one cluster networks.
    What is the adv. features on adv. versions?
    The Standard and Advanced versions are pretty much the same except for the following:
    Advanced can handle multi-cluster networks
    Advanced allows administrator delegation. This means that different administrators can be assigned to different groups of end-users.
    Standard does not have advanced workflows (Approver, MAC assigner, Shipper and Receiver).
    Advanced provides a northbound API for integration to another network management application, HR system or custom UI.
    2. I see the CPCP will deploy the new configurations into the CM clusters, that is fine on the new CM, but the existing CM will access the CPCP push into new configurations?
    CPCP can push configurations to new or existing clusters. Changes made directly on a cluster will be pulled back to PCP so they stay in sync.
    Any impacts will happen on deploying the new CPCP into the existing CM?
    CPCP was designed to add to a UC network at any time. When added to an existing network, CPCP can use it's reverse sync process to import users and CM configurations.
    3. CPCA lic. counted by every end devices, that is really expensive.
    List price may appear really expensive but you need to work with a sales person to determine the actual price. There is also the option to have an enterprise license agreement which might be more cost effective if this is for a Big Customer.
    Any cost effective methods to deploy the CPCA?
    ELA as mentioned above, or use the free standard version.  It the standard version provides enough functionality, it might be an option.  Cost effective may be hard to define.  If the product significantly lowers the cost to operate the network (faster fault resolution, less administrators, usage reports, resource utilization savings, etc.) it would be cost effective.  I don't know how big the Big Customer is or what/how many endpoints/devices/apps are in the network so I cannot provide any better advice.
    I am not sure how to answer the last question so will leave it for a TME or other expert on CPCA.  It looks like a medianet question. CPCA is not completely dependent on medianet to monitor TP environments and can provide some call trace and performance without it.  This is best answered by someone on the Assurance PM/TME team.
    Regards

  • Cisco Prime collaboration 9.0 assurance OVI template link plz help!!

    Dear all,
    I wanted to downlaod Cisco Prime collaboration 9.0 assurance OVI template please provide me the link. I have the download access in cisco web site.
    Please provide me the link
    Please help !!!!!!
    Regards,
    Rebecca....!!!

    Dear all,
    I wanted to downlaod Cisco Prime collaboration 9.0 assurance OVI template please provide me the link. I have the download access in cisco web site.
    Please provide me the link
    Please help !!!!!!
    Regards,
    Rebecca....!!!

  • VCS registered endpoints not displayed in Cisco Prime Collaboration 10.5 Assurance and Analytics

    Hi,
    We have been able to successfully add VCS in Prime Collaboration Assurance and Analytics 10.5 however the endpoints registered with VCS are not displayed in the list of devices. Though, we have been able to add a video codec manually which originally is registered with VCS.
    Thanks in advance
    Kunal

    Hi F,
    After investigation this issue, we came to know that this is due to the use of 4096 bit ssl certificate by the VCS.
    This is currently not supported by Prime Collaboration 10.5.1 and will be fixed in release 10.6 (available beginning of December).
    In the mean time you will be able to discover the VCS is you change the default VCS certificate to match the types that are supported by Prime Collaboration.
    Regards,
    Kunal

  • Is adding a Billing Server mandatory to view call quality graphs in Prime Collaboration Assurance and Analytics 10.5

    Hi,
    we are in the process of demostrating Cisco Prime Collaboration 10.5 Assurance and Analytics and somehow are not able to pull Call Quality Graphs. The question is Is it mandatory to add a Billing Server to get the missing graphs.
    Thanks in advance
    Kunal

    As per the following guide you should be able to discover and manage endpoints that are registered to Cisco TMS and Cisco VCS with both PCA Standard and Advanced.
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-5/assurance/standard/guide/Cisco_Prime_Collaboration_Assurance_Guide_Standard_10_5/bk_assurance_standard_chapter_010.html
    HTH
    Manish

  • Cisco Prime Collaboration Deployment with BE7K and VMWare license

    Hello, I am looking for some help trying to figure out if Cisco Prime Collaboration Deployment can be used to upgrade our existing 7.1.5 cluster.  From what I have read there is a API problem with the VMWare license that comes with the BE7K.  But after reviewing the BOM/quote from my VAR it lists the foundation license which based of the release notes is supported.
    UCSS-U-VMW-FND-5-1
    UCSS Cisco UC Virt. Foundation  Five Year - 1 server
    Has anybody out there had expericne with PCD and BE7K'?
    This is from release notes of PCD
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_P139675A_00_pcd-rns-1051/CUCM_BK_P139675A_00_pcd-rns-1051_chapter_010.html
    Search for “Business Edition 7000” and it will state it is not supported with PCD.  It is because the licenses that the BE 6k and 7K are shipped with don’t enable certain VMware APIs that PCD needs.
    “Virtualization Software License Compatibility
    Cisco Prime Collaboration Deployment is not compatible with all license types of VMware vSphere ESXi, as some licenses do not enable required VMware APIs.
    The following are compatible with Cisco Prime Collaboration Deployment:
    Cisco UC Virtualization Foundation (appears as "Foundation Edition" in vSphere Client)
    VMware vSphere Standard Edition, Enterprise Edition, or Enterprise Plus Edition
    Evaluation mode license
    The following are not compatible with Cisco Prime Collaboration Deployment:
    Cisco UC Virtualization Hypervisor (appears as "Hypervisor Edition" in vSphere Client)-preloaded on Cisco Business Edition 6000 and Business Edition 7000
    VMware vSphere Hypervisor Edition
    Any help would be appreacted.
    JP

    Thanks Jamie for repsonding, we haven't made any purchase's yet but I wanted to ensure we are purchasing a solution that won't lead to a lot of frustration.  We only have 1000 phones so we are pretty small and the BE7K seems to be a good fit and value.
    Cheers,

  • Prime Collaboration Assurance custom dashboard?

    Hi Everybody, 
    I'm new to Prime Collaboration... here are the questions
    Now I am using PCA 10.0 (assurance) and CUCM 10.5, and using UC Performance Monitor to see some stat ... 
    1.
    when using the "Cisco CallManager - CallsAttempted", when will the CallAttempted value will be resetted to Zero? and can it be done manuelly?
    2. 
    when I custom a dashboard "Cisco CallManager - CallsInProgress" , and make a test call. The value is zero continuiously 
    ("CallsActive", "RegisteredHardwarePhones" are not working too. but the "CallsAttempted" and "CallsCompleted" show correctly)
    However, when I switch to PCA's default dashboard "Call Activity", it shows the value correctly in "Calls In Progress".
    Why the same "CallsInProgress" but in different result?
    Thanks in advance 
    Sam

    Hi gokgokgok,
    I did find a solution.
    Here is what I did:
    1) Deleted the CUCM from Prime Collaboration Assurance 10.6.
    2) Changed the cluster ID from the default value StandAloneCluster to a unique value (e.g. LabCluster) on CUCM.
    3) Restarted the services 'Cisco CallManager' (Please note: a call processing service interruption could occur) and 'RIS Data Collector'.
    4) Discovered the CUCM in Prime Collaboration Assurance 10.6.
    The above steps are also described here:
    http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-unified-operations-manager/deployment_guide_c07-629357.html#wp9000663 (Cluster ID of a Cisco Unified Communications Manager Cluster ).
    If the above steps do not help, then the only way to fix the issue is to do step 2 and 3, then reinstall Prime Collaboration Assurance and then discover the CUCM.
    Best regards
    Igor

  • Prime Collaboration Assurance 10.6 root ssh login

    I am not able to login to PCA 10.6 using root over ssh I believe I have the password correct.  It just fails authentication.  I can ssh to admin fine and I can use the "root" command and then authenticate to the bash shell, but don't seem to have access to all the commands.  Any way to troubleshoot this or a little more insight would be great.

    Hi Stephen,
    root access to the CLI has been disabled (for security reasons) in Prime Collaboration Assurance 10.6.
    This Information can be found here (look for the heading 'General'):
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/assurance/advanced/guide/Cisco_Prime_Collaboration_Assurance_Guide_Advanced_10_6/Cisco_Prime_Collaboration_Assurance_Guide_Advanced_10_6_chapter_01.html#concept_8004BC83C1C34B81A6F7C1B270DE453B
    There is a hidden page that you can use for viewing logs, etc.:
    https://<FQDN or IP-Address of Prime>/emsam/index.html#pageId=com_cisco_emsam_page_diag_links
    Best regards
    Igor

Maybe you are looking for