Cisco Prime collaboration provisioning NCS not installed

Hi,
I have installed cisco prime collaboration provisioning which came bundled with BE6k, I am not able to access the web interface, when I ran the
show application status NCS cmd, it says application NCS not installed.
how can I install NCS, so far I am not able to find a way to install it.
please help.
thanks

You can get info by just searching on cisco.com
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-0/provisioning/guide/Cisco_Prime_Collaboration_Provisioning_Guide_10/Cisco_Prime_Collaboration_Provisioning_Guide_10_chapter_01110.html

Similar Messages

  • Cisco Prime Collaboration Provisioning?

    What is  Cisco Prime™ Collaboration Provisioning?

    You can get info by just searching on cisco.com
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-0/provisioning/guide/Cisco_Prime_Collaboration_Provisioning_Guide_10/Cisco_Prime_Collaboration_Provisioning_Guide_10_chapter_01110.html

  • Cisco Prime Collaboration Provisioning 10.x

     I have 2 questions regarding Prime collaboration provision 10. Would appreciate if someone could please point me in the right direction.
    1) I have phones that do not have users associated with them(conference room,etc) about 500 of them, when i import them in PCP they do not show up as subscribers. What is the best way to import phones into PCP if they are not associated with any user and the customer wants to keep it that way.
    2) When i choose extension mobility under service offerings to a subscriber under service area for a domain, the admin for that domain does not see it as a service he can offer to the subscribers. Does it have a pre-requisite?
    Many thanks for your time in advance.
    Regards,
    Tarun

    You can get info by just searching on cisco.com
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-0/provisioning/guide/Cisco_Prime_Collaboration_Provisioning_Guide_10/Cisco_Prime_Collaboration_Provisioning_Guide_10_chapter_01110.html

  • Cisco Prime collaboration provisioning BE6k

    Hi all,
    Does anyone know how to unlock users thru CLI.
    What if the admin user is locked and no other users are created.
    thanks.

    You can get info by just searching on cisco.com
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-0/provisioning/guide/Cisco_Prime_Collaboration_Provisioning_Guide_10/Cisco_Prime_Collaboration_Provisioning_Guide_10_chapter_01110.html

  • Cisco Prime Collaboration provisioning 10.5 service Template assignment

    Ok
    I have created my domain, added user roles and service areas. I created a service template and applied it to the user role.
    I then created a batch file that with the subscriber type field and ran it but none of the attributes in the services template is seen on the line of the phone.
    I tried enabling auto-provision but same result. The work around I have done is to bulk edit the phone in cucm.
    I have attached a copy of the batch file. The file added a phone service and assigns a chosen line
    Thanks in advance

    eng_ali,
    Check your browser version. I tried with IE version 11 and I am able to get past the device setting.
    Below is the requirement on browser and its setting.

  • Cisco Prime Collaboration Usage

    Hi,
    Many Asia costumers complain it is very difficult to maintain the Cisco Collaboration system.
    So we are considering the Cisco Prime Collaboration system, see which can help or not.
    I have few questions about the Cisco Prime Collaboration Provisioning (CPCP) for SME customer / Cisco Prime Collaboration Assurance (CPCA) for Big customer.
    1. CPCP Standard version is free? one cluster? no adv. features? What is the adv. features on adv. versions?
    2. I see the CPCP will deploy the new configurations into the CM clusters, that is fine on the new CM, but the existing CM will access the CPCP push into new configurations? Any impacts will happen on delopying the new CPCP into the existing CM?
    3. CPCA lic. counted by every end devices, that is really expensive. Any cost effective methods to deploy the CPCA?
    4. If we want to monitor the TP endpoints or DX video phones, I have to plug the lan to the 37XX or above switches? 29XX cannot? 
    Medianet-Capable Devices
    Feature
    Routers
    Switches
    Cisco IOS®Software Release Supported
    Mediatrace 1.0
    Cisco 1800, 2800, 2900, 3800, 3900 Integrated Services Routers
    Cisco Catalyst® 3560E, Catalyst 3560X, 
    Catalyst 3750, 
    Catalyst 3750-Metro (only 12.2SE),
    Catalyst 3750E, and
    Catalyst 3750X
    12.2SE
    15.0SE
    15.1T
    15.1M
    IP service-level agreement (SLA) video operation
    Routers will be supported soon. Please check the feature navigator as mentioned below
    Cisco Catalyst 3560E, Catalyst 3560X, Catalyst 3750, Catalyst 3750E, and Catalyst 3750X
    12.2SE
    15.0SE

    Hi,
    Been out of the office but see that no one has yet responded to this. I can answer some of the questions.
    1. CPCP Standard version is free?
    CUCM 10+ users are entitled to use the Standard version.
     one cluster?
    Yes
     no adv. features?
    Not missing a lot, especially for smaller one cluster networks.
    What is the adv. features on adv. versions?
    The Standard and Advanced versions are pretty much the same except for the following:
    Advanced can handle multi-cluster networks
    Advanced allows administrator delegation. This means that different administrators can be assigned to different groups of end-users.
    Standard does not have advanced workflows (Approver, MAC assigner, Shipper and Receiver).
    Advanced provides a northbound API for integration to another network management application, HR system or custom UI.
    2. I see the CPCP will deploy the new configurations into the CM clusters, that is fine on the new CM, but the existing CM will access the CPCP push into new configurations?
    CPCP can push configurations to new or existing clusters. Changes made directly on a cluster will be pulled back to PCP so they stay in sync.
    Any impacts will happen on deploying the new CPCP into the existing CM?
    CPCP was designed to add to a UC network at any time. When added to an existing network, CPCP can use it's reverse sync process to import users and CM configurations.
    3. CPCA lic. counted by every end devices, that is really expensive.
    List price may appear really expensive but you need to work with a sales person to determine the actual price. There is also the option to have an enterprise license agreement which might be more cost effective if this is for a Big Customer.
    Any cost effective methods to deploy the CPCA?
    ELA as mentioned above, or use the free standard version.  It the standard version provides enough functionality, it might be an option.  Cost effective may be hard to define.  If the product significantly lowers the cost to operate the network (faster fault resolution, less administrators, usage reports, resource utilization savings, etc.) it would be cost effective.  I don't know how big the Big Customer is or what/how many endpoints/devices/apps are in the network so I cannot provide any better advice.
    I am not sure how to answer the last question so will leave it for a TME or other expert on CPCA.  It looks like a medianet question. CPCA is not completely dependent on medianet to monitor TP environments and can provide some call trace and performance without it.  This is best answered by someone on the Assurance PM/TME team.
    Regards

  • Cisco Prime Collaboration Deployment with BE7K and VMWare license

    Hello, I am looking for some help trying to figure out if Cisco Prime Collaboration Deployment can be used to upgrade our existing 7.1.5 cluster.  From what I have read there is a API problem with the VMWare license that comes with the BE7K.  But after reviewing the BOM/quote from my VAR it lists the foundation license which based of the release notes is supported.
    UCSS-U-VMW-FND-5-1
    UCSS Cisco UC Virt. Foundation  Five Year - 1 server
    Has anybody out there had expericne with PCD and BE7K'?
    This is from release notes of PCD
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_P139675A_00_pcd-rns-1051/CUCM_BK_P139675A_00_pcd-rns-1051_chapter_010.html
    Search for “Business Edition 7000” and it will state it is not supported with PCD.  It is because the licenses that the BE 6k and 7K are shipped with don’t enable certain VMware APIs that PCD needs.
    “Virtualization Software License Compatibility
    Cisco Prime Collaboration Deployment is not compatible with all license types of VMware vSphere ESXi, as some licenses do not enable required VMware APIs.
    The following are compatible with Cisco Prime Collaboration Deployment:
    Cisco UC Virtualization Foundation (appears as "Foundation Edition" in vSphere Client)
    VMware vSphere Standard Edition, Enterprise Edition, or Enterprise Plus Edition
    Evaluation mode license
    The following are not compatible with Cisco Prime Collaboration Deployment:
    Cisco UC Virtualization Hypervisor (appears as "Hypervisor Edition" in vSphere Client)-preloaded on Cisco Business Edition 6000 and Business Edition 7000
    VMware vSphere Hypervisor Edition
    Any help would be appreacted.
    JP

    Thanks Jamie for repsonding, we haven't made any purchase's yet but I wanted to ensure we are purchasing a solution that won't lead to a lot of frustration.  We only have 1000 phones so we are pretty small and the BE7K seems to be a good fit and value.
    Cheers,

  • Cisco Prime Collaboration Deployment - Not able to mount NFS

    Hi everybody,
    We are trying to add an ESXi server to the PCD, but we are unable to succeed due to an error while mounting the NFS unit.
    We get the following message:
    "Failed to mount Cisco Prime Collaboration Deployments export as NFS store to the ESXi Host"
    In the PCD we obtain the followings logs I attach the file.
    We are using a VMware vSphere Enterprise Edition
    The ESXi, has the VMkernel port map to a different subnet that the management subnet.
    VMkernel: 10.11.202.75
    VMmanagement: 10.11.200.75
    To Add the ESXi host we are attacking the 10.11.200.75. Someone knows if the VMkernel must be in the same subnet for the NFS to mount?
    2014-11-07 14:17:26,711 WARN  [pool-1-thread-18] validation.ESXiValidation.isDSinESXiHost - Datastore PCD_NFS is NOT connected to ESXi Host 10.11.200.75
    2014-11-07 14:17:57,585 ERROR [pool-1-thread-18] custom.PreESXiHostCreate.call - failed to mount ucmap nfs 
    Thanks in advance.

    Hi everybody,
    Finally it turns it was a problem with the ASA. We apply a predefined rule in the ASA to allow NFS. We discover that the rule was not correctly defined, after creating a specific rule everything work just fine.

  • Migrating from Cisco Prime Unified Provisioning Manager 9.0 BE to Prime Collaboration 9.0 Provisioning

    Hi All,
        Cisco BE 6000 9.X support both Cisco Prime Unified Provisioning Manager 9.0 BE and Prime Collaboration 9.0 Provisioning as its management tool. OVA for both applications are pre-loaded on server from factory starting end of March 2013.
        For some customers that start with Cisco Prime Unified Provisioning Manager 9.0 BE, and want to migrate to Prime Collaboration 9.0 Provisioning for advanced features, they can follow the following guide for migration.
    http://www.cisco.com/en/US/partner/docs/net_mgmt/prime/unified_provisioning_manager/9.0BE/migration/guide/migrate_90be_pc90.html
        For more collaterals for Cisco Prime Collaboration, please visit
    http://www.cisco.com/en/US/partner/products/ps12363/index.html
    Best
    Jing

    Finally, the solution of the problem was:
    1-stop the daemon manager “net stop crmdmgtd” 
    2- Delete the xml files available under(please take backup from them) :
    CSCOpx\objects\sir\work
    CSCOpx\objects\topo\work
    3-Start the daemon manager  net start crmdmgtd  (wait for 20 minutes until all process are up )

  • Cisco Prime Collaboration and SIP Codes

    I am trying to position Cisco Prime Collaboration with a Cisco CUBE router and the client wants to know if Prime will be able to do the following:
    1) Scan, index and alert on configurable SIP 4xx, 5xx, 6xx
    2) Look at acive inbound/outbound calls

    Hello Varda,
    It seems as the 1040 sensors are not finding the TFTP server. The TFTP server list should not contain the ipaddress with values 32 or 92 in their octets,
    1. The 1040 needs to learn of the TFTP by DHCP option 150.
    2. Please make sure that it is set on your DHCP server. 
    3. To confirm that the 1040 sensor is receiving the TFTP IP open a web browser and type http://  and see if the TFTP address field is showing the IP. 
    4. If it is then you might also need to restart the TFTP service on the CUCM so that the 1040 can download the cnf and image files.
    Attached is the userguide for 1040. Go through it and this should be able to resolve your issue.
    This is a other  method to check the  sensor  is fine
    Fist step install  download winagents tftp server ,
    enter a Service Monitor Server   Configuration / sensor1040 and in TFTP server  enter    ip address(winagents tftpserver) and go to SETUP
    in setup   put you ip address in PRIMARY SERVICE MONITOR  and push OK   you look the server write file in (TFTP server )
    Next STEP
    Go to MANAGEMENT   and  add new sensor you need mac address remember second port in sensor is span port you can make a sencond file in the tftp server
    Next STEP
    go to service monitor server and copy  file *.img CSCOpx/
    Next STEP
    Search  you dhcp server switch     option 150 in put your ip address tftp server when sensor power off  and power on the sensor search tftp server and search files to autoconfig and register to service monitor when test is ok
    its time to upload change winagent tftp server to  callmanager tftp server
    Hope this helps
    Thanks & Regards,
    Venkitesh

  • Prime Collaboration Provisioning with 2008R2

    Is anybody using Prime Collaboration Provisioning with a 2008R2 AD and doing LDAP authentication?  Trying to set it up here, and getting an error of:
    Error Message:
    Login to the LDAP server failed. Please check the  credentials. ldap://10.4.0.X:389
    The documentation mentions AD 2000/2003/2008 as supported, Active Directory guys say that 2008R2 had quite a few changes to AD functionality.  Can anybody from Cisco speak to whether AD 2008R2 or 2012 will be supported in CPCP 10.0?
    We also have an ACS server we can use, just trying to avoid having to create 30-40 accounts for remote field guys in our ACS if they already have LDAP accounts that work for all their other authentication.

    Roadmap questions, or questions on products which have not been released, cannot be answered here.
    I recommend you ask that here:
    https://communities.cisco.com/community/partner/collaboration?view=overview
    Or reach your SE/AM.
    HTH
    java
    if this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • How to provision Softphone at Prime Collaboration Provisioning Manager

    Hi All,
    Just wondering is there anyway to provision Jabber andriod / iPhone by using Prime Collaboration Provisioning Manager?
    In the selectProduct.jpg does not show any "enable Softphone Support" ........
    Besides that, in the phoneType.jpb does not show "Cisco Jabber for Android / iPhone.
    Even though, the Subscriber Role Type had tick for Cisco Jabber for Android & iPhone.
    Soneone had any solution?
    Software version that using show below.
    CUCM version 9.1.2
    CIMP version 9.1.1
    Prime Collaboration 9.5
    Thanks
    Wilson

    Hi Mark,
    "Admin Distinguished name" should be the name of the user that should be present in LDAP user search scape you have provided.
    I suppose you have locally also created the same LDAP user on CPCA with different password (same passowrd doens't matter).
    Let me know whether you are still getting same issue.
    Regards,
    Praveen

  • Does Cisco Media Services Interface mark RTP and Signaling packets regardless of Cisco Prime Collaboration/MediaNet Deployment?

    Hi there,
    I'm deploying Cisco UC Integration Lync 9.2(5). There's a QoS portion which states that you can install Cisco Media Services Interface on the user's PC and is to be used with Cisco Prime Collaboration or MediaNet:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucilync/9/CUCI_BK_C0545A41_00_cisco-uc-integration-for-microsoft/CUCI_BK_C0545A41_00_cisco-uc-integration-for-microsoft_chapter_010.html#CUCI_CN_IDBE72E9_00
    If we don't have Cisco Prime Collaboration or MediaNet, does Cisco Media Services Interface mark RTP and Siganling packets on the outbound regardless? Or do I have to manually set the DSCP values for the PC?
    Thanks,
    John

    When you were placing the internal test calls, where was your phone located?   The RTP streams are usually only set up between the two endpoints (assuming no transcoder or MTP is used).
    Have you have already checked calls between IP phones at your central site (where Unity is located) and IP Phones at site A?   Are these working fine?   If not, then it's likely you do have a QoS issue over the WAN to Site A.
    Have you confirmed whether or not calls from the PSTN gateway at site A experience any voice QoS issues when transferred to an IP Phone at the central site?
    Is the same codec is being used for the MGCP gateway as for IP Phones at that site (check the Region settings for the Device Pool it's in)?
    If these things have all been checked, then you may want to consider collecting a simultaneous sniffer trace from each end of a single call, and comparing what's seen at the two endpoints.
    Kind regards,
    Craig

  • Cisco Prime Collaboration Assurance IPPhone 3901 no serial number report

    Hi All,
    I have installed Cisco Prime Collaboration Assurance in my office and try to create phone inventory report , so far no problem , but when i add IPPhone 3901 there no serial number in the report , I have enable web access on the phone , i can see the serial number by click the IP  .
    any help ?
    Best Regards,
    Tommy

  • Cisco Prime Collaboration 9 cannot discover ipphone

    Hi Folks
    I am testing Cisco Prime Collaboration ver 9.0.24376 in my lab environment, Im using it to discover CUCM Cluster version 8.6.2 and successfully to obtain Server and Gateway information, but I can't see any endpoint that registered to CUCM shown on Cisco Prime Collab dashboard.
    I am also test to discover my 2nd CUCM Cluster version 9.0.1 and also successful with CUCM Server component but not for the endpoint.
    I follow this guide to ensure CUCM side already configure properly.
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps12363/deployment_guide_c07-723457.html#wp9000214
    Is anyone have similar problem like me ?
    Thanks
    Novriadi

    There is a specific support forum for Prime Collaboration and older UCMS management products at:
    https://supportforums.cisco.com/community/netpro/collaboration-voice-video/pcm
    I don't know if anyone from the collaboration management team monitors this page.

Maybe you are looking for