Cisco Prime how to hide SSID

Hi there.
I need to hide SSID from broadcast from Cisco Prime.
I can do this easily on WLC by un-checking 'broadcast' under SSID on WLC but I have controller which I only have access through Cisco Prime.
So I would like to find out how I can disable broadcast on Cisco Prime please.
Thanks in advance

Refer : creating / adding templates
http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-3/configuration/guide/pi_13_cg/temp.html#20699

Similar Messages

How to Hide SSID's on Windows 8?

hello
i wanna hide SSID of USB NIC wireless router on winndows 8.
more description:
i create a wireless router on my windows 8 by USB wireless adapter
and i want to hide the SSID of this wireless connection.

It is not entirely clear to me what you are trying to configure.
in general 'hiding the SSID' of a wireless network is configuring the access point to not broadcast it's name, so it remains hidden for most users.
If you are using the builtin 'Hosted network' functionality to turn you windows pc in a virtual access point, you cannot configure these kind of details.
if you are using a third party software to do this, you shoyuld refer to the software manual/vendor or developer.
If you are using a hardware access point, refer to the documentation/vendor for assistance.
MCP/MCSA/MCTS/MCITP

Cisco AnyConnect::How to hide "Security Warning : Untrusted Certificate"

Whenever I connect to my ASA using Anyconnect client, attached warning message always appear and there is no option to Trust it or import certificate so that it should not appear next time.
Anyone please help to make the option visible to trust certificate or make this warning go away.
I tried Anyconnect 3.1.05152 and the latest also.

Here is the output:
ASA# show run webvpn
webvpn
enable outside
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-3.1.05152-k9.pkg 1
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 2
anyconnect enable
tunnel-group-list enable
ASA# show run tunnel-group
tunnel-group 22.22.22.22 type ipsec-l2l
tunnel-group 22.22.22.22 general-attributes
default-group-policy GroupPolicy_22.22.22.22
tunnel-group 22.22.22.22 ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group 33.33.33.33 type ipsec-l2l
tunnel-group 33.33.33.33 general-attributes
default-group-policy GroupPolicy_33.33.33.33
tunnel-group 33.33.33.33 ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group Anyconnect-Wisconsin type remote-access
tunnel-group Anyconnect-Wisconsin general-attributes
address-pool Anyconnect-pool
authentication-server-group CA-LDAP-WM LOCAL
default-group-policy NO_VPN_ACCESS
tunnel-group Anyconnect-Wisconsin webvpn-attributes
group-alias Anyconnect-Wisconsin enable
tunnel-group RemoteAccess_Wisconsin type remote-access
tunnel-group RemoteAccess_Wisconsin general-attributes
address-pool Anyconnect-pool
authentication-server-group CA-LDAP-WM LOCAL
default-group-policy NO_VPN_ACCESS
tunnel-group RemoteAccess_Wisconsin ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group WM-Wisconsin type remote-access
tunnel-group WM-Wisconsin general-attributes
address-pool Anyconnect-pool
authentication-server-group CA-LDAP-WM
default-group-policy GroupPolicy_WM-Wisconsin
tunnel-group WM-Wisconsin webvpn-attributes
group-alias WM-Wisconsin enable
ASA# show run group-policy
group-policy NO_VPN_ACCESS internal
group-policy NO_VPN_ACCESS attributes
vpn-simultaneous-logins 0
group-policy GroupPolicy_Anyconnect-Wisconsin internal
group-policy GroupPolicy_Anyconnect-Wisconsin attributes
wins-server none
dns-server value 10.155.17.246 10.198.72.46
vpn-simultaneous-logins 10
vpn-tunnel-protocol ssl-client
default-domain value XYZ-AG.org
group-policy GroupPolicy_WM-Wisconsin internal
group-policy GroupPolicy_WM-Wisconsin attributes
wins-server none
dns-server value 10.155.17.246
vpn-tunnel-protocol ssl-client
default-domain value XYZ-AG.org
group-policy GroupPolicy_33.33.33.33 internal
group-policy GroupPolicy_33.33.33.33 attributes
vpn-tunnel-protocol ikev1
group-policy GroupPolicy_22.22.22.22 internal
group-policy GroupPolicy_22.22.22.22 attributes
vpn-tunnel-protocol ikev1
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
vpn-tunnel-protocol ikev1
group-policy RemoteAccess_Wisconsin internal
group-policy RemoteAccess_Wisconsin attributes
dns-server value 10.155.17.246 10.198.72.46
vpn-simultaneous-logins 10
vpn-tunnel-protocol ikev1
default-domain value XYZ-AG.org
Whenever I try to select WM-Wisconsin, It always falls back to Anyconnect-Wisconsin

Hide SSID with Hub 3

Hi,
just got a new Hub 3 but as I've got some legacy devices that connect wirelessly but can only use WEP I've had to switch from WPA2 to WEP and wish to hide my SSID. I found this post....
http://community.bt.com/t5/BB-Speed-Connection-Issues/how-to-hide-ssid-on-the-new-hub-3-0/m-p/217965...
which implies that hiding SSID is not available on Hub 3.
soooo I just want to confirm that this "useful security precaution" is no longer available at all with Hub 3 (as opposed to is not available with Hub 3 configured for WPA2).
Thanks.

Is it possible to update the drivers or firmware for these devices?
You could simply add a separate wireless access point for these devices, that uses MAC filtering and can hide the SSID.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How to customize email notifications sent by Cisco Prime.

Hi,
We have been receiving email alerts for any unresponsive devices in Cisco Prime. I was able to find the option to customize the subject for such email alert under Admin-Network-Notification and Action settings, however I am not able to locate the option to change the email body.
The email body for such alerts has lot of unrequired information which I would like to remove.
Can someone provide me the options on how to get rid of such information in the email body.
Regards

Hi ,
To customize the e-mail subject:
Step 1 Select Admin > Network > Notification and Action Settings > Fault - Email subject customization.
The available and selected lists of the subject attributes for e-mail are displayed.
To customize the e-mail subject, you can add and remove subjects from the current e-mail subjects list. By default, following list of e-mail subject attributes are displayed in the Selected Subjects for E-Mail box.
•Event ID
•Device Name
•Time
•Severity
•Event Name
•Status
To add a subject:
a. Select the subject attribute from Available Subjects for E-Mail.
b. Click Add.
The selected subject attribute is added to the Selected Subjects for E-Mail list.
You can add a subject attribute only from the Available Subjects list to the Selected Subjects list. You cannot add a subject attribute from the Selected subject list to the Available Subject list.
To remove a subject attribute:
a. Select the subject attribute from Selected Subjects for E-Mail.
b. Click Remove.
The selected subject attribute is removed from the Selected list and added to the Available subjects for E-Mail list.
You can remove a subject attribute only from the Selected Subjects list and not from the Available Subjects list.
Step 2 Click Up or Down to rearrange the order of the selected e-mail subject attributes.
Step 3 Click Apply to save the customized e-mail subject attributes.
Note: Other than this you will not be able to customize any thing, User-defined fied option will not work.
I hope this will help
Thanks
Afroz

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0? I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point. I thought that information was in there, however I cannot seem to find it.
Thanks in advance!

Hi
You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
Regards
Rasika
**** Pls rate all useful responses ****

How view snmp Traps CISCO PRIME 1.2

It is posible to view snmp Traps from WLC to CISCO Prime ?? How ?

Hi Steve :
I need to view the traps which are generated in the Controller, I need to view that in the Cisco Prime Infractructure. I´ve configured Communities in WLC with IP Address to Cisco Prime and Trap Receiver with IP address to Cisco Prime.
Now, How can I view these Traps in the Cisco Prime ?.
Another question , Is it posible to configure Switch from Cisco Prime ?
Thanks,
Claudio

Cisco Prime LMS / how to create MyDashboard

Hi everybody,
i want to create my own Dashboard. But when i do this i have no choise in the dropdown menu to do this. ('copy dashboard' is empty)
When i click the created dashboard, the site is empty.
Do anyone know how to integrate a portlet to my own profile?
Thanks in advance.
Kind Regards
Georg
Cisco Prime
LAN Management Solution
Version 4.2.2

The standard way to do this is by creating a new guest user template and choosing 'Import from file'. Every line of this file (.csv) may be identical, except for the username.
Of course, you must enter the usernames by hand. If you're looking for a way to generate usernames like companyNNNN automatically, you should use some form of scripting.

How to choose Cisco Prime NCS

Dear Cisco Team,
I would like to know what are the main facts to choose Cisco Prime NCS.
And how many kind of monitoring system are there in Cisco.
Best Regards,
Thet Htar

Hi Thet,
Cisco Prime Infrastructure simplifies the management of wireless and wired networks. It offers Day 0 and 1 provisioning, as well as Day N assurance from the branch to the data center. We call it One Management. With this single view and point of control, you can reap the benefits of One Management across both network and compute.
Prime Infrastructure enables you to configure and monitor one or more controllers, switches and associated access points. Prime Infrastructure includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
Read the below link for more detail::
http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/ovr.html
You can download it from here and use it under evaluation period for testing::
https://software.cisco.com/download/release.html?mdfid=286236028&flowid=72882&softwareid=284272932&release=2.2&relind=AVAILABLE&rellifecycle=&reltype=latest
Thanks-
Afroz
***Ratings Encourages Contributors ****

How to mornitor VSS (Virtual Switching System) & Stack (Switch) By Cisco Prime Infrastructure

Dear all,
I have 02 C6504-E with VSS (Virtual Switching System)
and 02 C3750X-24T-L used Stack
How to you Cisco Prime Infrastructure to monitor VSS & Stack tatus?
Thanks.

Virtual Switching technology is the process of combining two standalone distribution switches found in the local distribution layer into a single management point.
The Virtual Switching System functions and appears as a single switch to the wiring closet and the core layer. You can also create Virtual Switching Systems with a pair of standalone switches available in the core layer.
For configuration please check the below link:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/user/guide/configuration/configvss.html#wp1042960

Cisco Prime 2.0 Infrastructure-how to remove unneccessary interfaces from monitoring

Hello all,
We have Cisco Prime 2.0 Infrastructure and I would like to know how to remove certain interfaces from monitoring? For example, I do not need monitoring on some ISDN and FXS/FXO ports. I am receiving email alerts for ISDN channels going up/down for example. Thanks.

take a look at:::
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/user/guide/setup_groups.html

Getting past "Fetch VLAN configuration - Command failed" errors in Cisco Prime Infrastructure 2.0 - How?

I've got a handful of devices in Cisco Prime Infrastructure 2.0 which show up in the "Archive Failed Devices" view. The "Failure Reason" is some variation of "Fetch VLAN configuration - Command failed" sometimes including "TELNET: Failed to establish TELNET connection to x.x.x.x". What does this mean? How do I overcome this? In all cases, the device is configured to use SSH and has valid SSH credentials. In all cases, I can SSH from the command line of the NCS appliance to the devices listed in the "Archive Failed Devices" view.

Hi
I was able to fix the "Fetch VLAN configuration - Command failed" by allowing tftp from the device to PI server in firewall. See if this can help.

How to install cisco prime 2.1 on a empty HP server

Hi all,
i want to install cisco prime 2.1 using the physical appliance ISO File on a new empty HP Server, because we have no vmware environment.
After booting from the ISO File I receive the error "connot find kickstart file on cdrom". Because of this I am not able to install the software.
I have loaded the ISO image two times from cisco, so im pretty shure that the images is not broken.
Any Idea?
Thanks!

If you have control of an HP Server, why don't you load VMware into the server? PI requires VMware and can't be loaded onto a "bare metal" frame.

How do we suppress Cisco Prim Alarm ?

Hi Expert,
If there are any way to suppress the repeated alarms in Cisco Prime Infra?
We are using Cisco Prime NCS 2.0 (2.0.0.0.295)
Thank you.
-Ananthan

Hi Ananthan,
AFAIk, there is no way you can suppress the repeated alarms :(
Thanks-
Afroz

Some question about Cisco Prime Infrastructure

Dear all
I have some question about using Cisco prime Infrastructure:
- Can I show how many user access to one Access Point (AP) ?
- If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
- How many time do Cisco Prime Infrastructure refesh user informantion .?
Please help me and send picture about it if you can.
Thank you so much.

Hi,
I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
1- You can surely find how many clients associated to a specific AP.
- Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Cisco Prime how to hide SSID

Similar Messages

Maybe you are looking for