Cisco Prime Infra 1.2 Web server

Hello,
I have installed a version of Cisco Prime Infrastructure 1.2.11 with a kickstart .ova file on my production network.
Everything goes fine and I follow the instructions for installation ; i can ping my Cisco PI server and ssh into it as admin.
However, when I try to reach the web server via https, it does not work. I have reviewed my proxy settings and they are not to blame. The nslookup returns the IP address when I poll it. I have read elsewhere that I would need "NCS" service to be started, but I can't find anything called NCS on my Prime Infra server in CLI mode.
Anyone with a suggestion for this issue ?
Thanks
Jeremy

Actually I know what's happening ; the PnP (plug n play) setup was not configured, and so 443 port was not up.
I configured PnP using "pnp setup" command, but then I have to supply a list of certificates and keys :
Enter absolute pathname of PnP Gateway server key file:
Enter absolute pathname of PnP Gateway server certificate file:
Enter absolute pathname of Prime Infrastructure server certificate file:
I tried to do this with the private key I had for my server. I created it on my Certificate Authentication and got a .key and a .csr (certificate server request).
However when i feed them to my PnP setup I get this error :
Setup is in progress.......
Stop PnP Gateway server
OpenSSL command failed for mycert.csr and mykey.key
any idea as to why this is happening?
I read elswhere again that i need to run commands with "ncs" but I don't have "ncs" commands on my prompt...
Thank you for your time

Similar Messages

Can Cisco Prime Infra 2.1 work as syslog server

Hello all,
Customer want Cisco Prime Infra 2.1 to work as syslog server. they want to query text in syslog and get raw log file from Cisco Prime Infra. but when i see in user interface. I think that it cannot query and search text in syslog. but i am not sure whether we can get raw log file per devices from Cisco Prime Infra. Can anyone know about this.?
thanks
sompoj

Hi Sompoj,
In the prime infrastructure Syslogs are directly read from udp port 514 and then filtered
, the non SEV1 and SEV2 syslogs will be dropped and will not be entered into db . The
syslog messages will not be saved into log files .
Thanks-
Afroz
****Ratings Encourages Contributors ****

Error coming while installing Cisco Prime 4.2 on Windows Server 2008 R2

Hi,
I'm trying to install Cisco Prime 4.2 on Windows Server 2008 R2. While initiating the installation, message box "Error: csv not found" appears, and the installation terminates.
Is there any csv template need to be copied at any location before hand?

Are you installaing LMS 4.2.4 directly ?
Looking at the error ,it looks like ...
If yes then you need to follow the below path:
The installation path of LMS 4.2.4 : LMS 4.2 > LMS 4.2.2 > LMS 4.2.4
Thanks-
Afroz
[Do rate the useful post]

Cisco Prime Infra and SMS gateway integration

Hello,
Can anyone point me to right documents or resources to integrate cisco prime infra 2.x with SMS gateway?
Is there any way I can get SMS alerts for critical events in Cisco Prime Infra 2.x?
Any suggestion is highly appreciated.
Regards,
Girish

Not directly.
If you configure PI to email you on alerts, many carriers allow you receive SMS via an email address - i.e. <your_number>@<your_carrier>

Cisco Prime Infra 2.1 Standard Install using OVA File HD Requirements

   Hi guys,
       I wanna install the Cisco Prime Infra Standard 2.1 using the OVA File but I haven't 900 HD Space continuous in Storage.
   Two questions
       01) The Virtual Machine allocate this space (900 HD) during the install or allocate dynamically as needed ?
       02) There is a option to install the Standard Version using less HD space ?
      Thanks
      My Best Regards
      Andre Gustavo Lomonaco

Initially we installed medium when Prime 2.0 came out, however about 3 months lately we needed to upgrade to standard/pro. Upgrading the CPU/Core was seamless
Install a smaller OVA with enough cpu/cores for the standard and just add disk space later on
https://supportforums.cisco.com/document/9871606/adding-disk-space-prime-infrastructure
Its not a recommended practice but there are work around...

Cisco Prime Infrastructure 1.3 Web Log Invalid user password

Hi,
I recently installed Cisco Prime Infrastructure 1.3 per the set up guide. I was able to login into the webinterface.
Then I insert the radius server and reload ncs. Since then I'm not able to login to the web interface. I get the following error message "Invalid Username or Password. Please try again". Even when I set the ncs root user with a new password. One issue could be that i forgot the enable fallback to local.
Is there a way to change the radius config back via cli?
Thanks a lot
Hansruedi

Hi Hansruedi,
Thanks you for your help and your time.
I followed your recomandation until the fourth step.
But after this step, I lost the web page connection.
I check nsc status but all is running :
NMS still stopped. NMS must be running to have an access by web page ?
I restart Prime (by reload command) but nothing changed.
Thanks

Cisco Prime LMS 4.1, "License Server/Daemon Manager is down."

Hello,
We having problem with Cisco Prime LMS running version 4.1.
When open Home page shows the next message: "License Server/Daemon Manager is down. Please check license.log for more information." (see attached)
The daemon server is stopped already and i can't restart it, see below:
C:\>net start crmdmgtd
The Cisco Prime Daemon Manager service is starting.
The Cisco Prime Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Thanks

It looks like you're seeing CSCte49301. Follow the release note steps to solve this:
Symptom:
The EssentialsDM daemon hangs in a Waiting to initialize state (as seen in the output of the pdshow command). Additionally, one might see "Error connecting to JRM" in Resource Manager Essentials applications.
Conditions:
This occurs on Windows servers after the patch for KB968930 is installed, and only if the Windows Remote Management service was started prior to starting CiscoWorks Daemon Manager.
Workaround:
Shutdown CiscoWorks Daemon Manager with the following command from the server's command prompt:
net stop crmdmgtd
Delete the following two files:
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry.backup
Restart CiscoWorks Daemon Manager with the following command:
net start crmdmgtd
If that does not work, then the Windows Remote Management service must be stopped, and disabled. Then, CiscoWorks Daemon Manager must be restarted.

Cisco Prime Collaboration Assurance _ Web login

I have recently deployed Cisco Prime Collaboration Assurance standard within our Vmware environment with the view to evaluate and deploy into production.
I have successfully deployed within the environment and can log into the appliance via SSH via the root, admin and globaladmin account however when I try to login through the Web Gui with the above accounts, i am getting the " invalid username or password" error.
Can anyone provide guidance please
Peter

Hi Peter,
Never faced such issue.
Look into the bugs if helps.
PC 9.0 After restore from backup, cannot login - invalid password
CSCui00260
Description
Symptom:
cannot log in to the GUI with any known username/pw including globaladmin account.
tomcat logs will show 'untrusted certificate' errors.
Conditions:
seen after a fresh restore from backup on a new server.
Workaround:
contact BU for workaround.
Assurance password for globaladmin with * at end or beginning fails
CSCue81630
Description
Symptom:
User 'globaladmin' is unable to login to Prime Collaboration Assurance
Conditions:
The password for 'globaladmin' contains '*' at the beginning or end of the password
Workaround:
Do not use '*' character at the beginning or end of the password
regds,
aman

Cisco Prime Infrastructure 1.3 Web Log In Error

Hi,
I recently installed Cisco Prime Infrastructure 1.3 per the set up guide. I am able to log into the VM back end but when I try to log into the web interface with the admin account I get the following error message "Invalid Username or Password. Please try again". I verified that the username and password are correct but I still can not get in.

I think there is some bug (or feature) that makes that the accounts defined during setup are not valid in the web gui.
Since the users I created using CLI, work when I SSH into the PI 1.3, I know they are correct.
Clearly the web part uses a different way to authenticate users. I'm told all this worked just fine in PI 1.2, so not sure what cisco is up to.
To resolve this use the root account to login in the web interface.
It has the same pw as the admin user.
There you can create an admin account (and or others)
Cheers,
Michel

CISCO PRIME INFRA 1.1 License

Hai Recently, we are installing cisco Prime NCS 1.1 and we are facing some issue for License.
I would like to clarrify the below licneses.
L-WCS-NCS1-M-K9
L-PINCS11-300-U
L-PINCSW11-300-U
We installed the second licnese and got 300 device limit. But we have 500 access points in our network. We are using NCS only for Wireless Management and not for Network Devices which is using LMS .
I am confused, we have additional 2 more licenses as above and why is that for??? can any one let me know these!!! Y we are using WCS-NCS license and it is having lonly 25 device limit support , which we cannot import since i already upload the second licnes. Also y this L-PINCSW11-300-u WAN license used for????

You can always remove the license if you installed the wrong license....You need to install your base first then your adder. You don't need to use the LMS or WAN as this comes free with NCS 1.1. The WCS to NCS migration comes with a free 25 ap base license. You just need to make sure you have purchased the correct license to cover your 500 ap count.
Here is another thread regarding the license:
https://supportforums.cisco.com/message/3672947#3672947
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Cisco Prime Infrastructure 1.2 - web browser freezes when managing rogue APs alarms

Hello all,
has anybody faced a freezing problem when you click in Cisco Prime Infrastructure 1.2 down on alarm bar and then to Rogue AP alarms and then try to add an annotitation or change a rogue alarm to Friendly?
I tried it on different PC, different browsers (Firefox 14.0.1. Chrome ...) and the problem is still there.
Has anybody an idea?
Thanks.
Regards
Karel

I just tried it from my lab VM and had no problems. I use Chrome and the browser does sometimes not refresh for a while but that is just when I start to click around.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Cisco Prime Infra 2.1 for Wireless and Wired Management

Hi All,
I've two CPI 2.1 physical appliances running in HA mode. Currently they are used to manage Wireless infrastructure.
Now, we are planning to buy licenses and add wired devices to CPI.
We've two separate teams. Team-A manages Wireless only and Team-B manages Wired infrastructure.
Both teams want their own Admin accounts to access CPI and they don't want to use shared credentials. If Team-A logsin with their Admin Account, they should see Cisco Prime Infrastructure dashboard and if Team-B logs in with their own Admin Account, they should see CiscoWorks LMS Dashbaord.
How can we achieve this? I can create user accounts and provide access to the CPI, but I'm not sure how to specify which dahsboard they will get access to.
Thanks,
CJ

You should consider merging team doing wired & wireless, it is difficult to manage these individually.
By any chance if you deploy 3850/3650, it is both WLC & Switch, so managing by two different teams does not make sense.
HTH
Rasika

Cisco Prime Infra 2.1 fails to import an image from file

We have a standard Cisco Prime Infrastructure 2.1 install. The software repository has been built up by importing the IOS images from the discovered network devices. To implement netflow capabilities on some 3750X switches we need to upgrade the IOS on the chassis and the NM card C3KX-SM10G. I was able to download from Cisco Support the 3750X IOS .tar file and import it from my machines local file system. However, the modules tar file c3kx-sm10g-tar.150-2.SE6.tar fails on the upload from my local file system. When I look at the import rob results they are as follows:
Image collection from source SUCCESS
Copying Image to Staging Location SUCCESS
Copying Image to Repository FAILURE
I've tried to import just the .bin file but this also fails at the same stage as above.
I've also tried to scp the file directly into the backend file structure with no success into the folder /opt/CSCOlumos/conf/ifm/swim/jobs with the other images (oddly noticed the above .tar file for the 3750X isn't listed with the other .bin files - although is available through the webGUI).
I need to distribute the NM .tar file across multiple switches and I'd prefer to use Cisco Prime for the job. Any help would be gratefully received.
Thanks.

I had (still have?) the same problem with it not copying the image over. I put in a ticket and they told me to upgrade to Prime Infrastructure 2.1-Device Pack 4 pi_2.1device_packs_4-40.ubf which helped but it still fails sometimes.
I had read a post from another thread about going through software image management to distribute and that seems to work a little better, but still fails sometimes.
So I think that there are still quite a few issues in Prime that need worked out.
We have over many switches that need software upgrades and I was hoping to do it quickly through Prime but I don't want to send out more then one image at a time to switch because I don't want it to fail. So it's a drawback right now, just doing one at a time to make sure it takes.

Cisco Prime Infra 2.2 + Third Party Inventory and configuration backup

Hi All,
I am having a doubt related to Cisco prime solution capability to do a discovery and config backup for non-cisco devices.
Requirement is to use Cisco prime to do a discovery, inventory and take configuration backup for non-cisco devices. Is it something possible out of the box ?
If not possible out of the box, is there any method to do that using any custom API ?
Can we monitor 3rd party( Non-cisco) devices using Cisco Prime 2.2 ?
Skr

Hi,
Below is supported-device list, check if your device is listed there.
http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information

Moving buildings cisco prime infra 2.1

Hi,
is it possible to move a building from one campus to another if the building already exits within the "new" campus?
regards
André

After adding a new building, you can move it from one campus to another without having to recreate it.
:http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/maps.html#pgfId-1670891

Cisco Prime Infra 1.2 Web server

Similar Messages

Maybe you are looking for