Cisco Prime Infra 2.1 for Wireless and Wired Management

Hi All,
I've two CPI 2.1 physical appliances running in HA mode. Currently they are used to manage Wireless infrastructure.
Now, we are planning to buy licenses and add wired devices to CPI.
We've two separate teams. Team-A manages Wireless only and Team-B manages Wired infrastructure.
Both teams want their own Admin accounts to access CPI and they don't want to use shared credentials. If Team-A logsin with their Admin Account, they should see Cisco Prime Infrastructure dashboard and if Team-B logs in with their own Admin Account, they should see CiscoWorks LMS Dashbaord.
How can we achieve this? I can create user accounts and provide access to the CPI, but I'm not sure how to specify which dahsboard they will get access to.
Thanks,
CJ

You should consider merging team doing wired & wireless, it is difficult to manage these individually.
By any chance if you deploy 3850/3650, it is both WLC & Switch, so managing by two different teams does not make sense.
HTH
Rasika

Similar Messages

The best router / network set up for wireless and wired combined use

Shout out to all wireless experts...
In my home, I have an iBook G4 I would like to 1) link with a wireless capable Brother MFC printer, while simultaneously maintaining the wired connectivity of the iMac already USB connected to same; plus 2) utilize the Internet wirelessly (via the iBook) without adversely affecting the iMac's wired functionality. Make sense?
I have the preinstalled / bundled AirPort Extreme (404.2) and Bluetooth (1.7.5) software, and imagine this is doable, but I wonder...Which router, and specifically, how to (step by step) do this best without incurring unnecessary bells, whistles or expense?
I've heard / read about the Belkin F5D8230-4 (mixed opinions), earlier Belkins, plus was advised that any 802.11 b/g was sufficient, but continue to be uncertain as to which way to go...help...

Shout out to all wireless experts...
In my home, I have an iBook G4 I would like to 1)
link with a wireless capable Brother MFC printer,
while simultaneously maintaining the wired
connectivity of the iMac already USB connected to
same; plus 2) utilize the Internet wirelessly (via
the iBook) without adversely affecting the iMac's
wired functionality. Make sense?
I have the preinstalled / bundled AirPort Extreme
(404.2) and Bluetooth (1.7.5) software, and imagine
this is doable, but I wonder...Which router, and
specifically, how to (step by step) do this best
without incurring unnecessary bells, whistles or
expense?
I've heard / read about the Belkin F5D8230-4 (mixed
opinions), earlier Belkins, plus was advised that any
802.11 b/g was sufficient, but continue to be
uncertain as to which way to go...help...
* I neglected to mention (newbie error) that I use (yes, it's tragic) dial-up service...
Does that additional fact change things in terms of the recommendations made?
If so, were I to 'upgrade,' which method (cable, DSL, etc.) is the most efficient, yet least costly?
iBook G4 (1.4 GHz / 1.5 GB) Mac OS X (10.4.7) iMac (9.2); Performa 631CD (Ancient 7.5); MacPlus (Primordial Ooze OS)

Constant disconnect for wireless and wired for the past two weeks...

And it's becoming worse and worse. I don't understand and Verizon has escalated my problem - BUT NO ONE HAS CALLED ME BACK. It's been over two weeks. I've restarted, reset, rebooted, screen shared with tech support. They even sent me a new modem. Both modems behave the same way. I know it's an outside line issue. It has to be. This started after a bad storm. They won't listen though. Tonight - I ordered Comcast Internet. They are coming to install on Thursday. If Verizon can't fix by then they are done in my book!

Be prepared to be moving on to comcast then, I've had the same issue for 3 months now, 3 techs, 20+ hours of phone calls, multiple no call backs and been hung up on a few times, even here my topic gets locked and no help is provided Verizon doesn't seem to be willing to fix actualy problems with their service so by all means switch to a company who will

Cisco Prime Infra and SMS gateway integration

Hello,
Can anyone point me to right documents or resources to integrate cisco prime infra 2.x with SMS gateway?
Is there any way I can get SMS alerts for critical events in Cisco Prime Infra 2.x?
Any suggestion is highly appreciated.
Regards,
Girish

Not directly.
If you configure PI to email you on alerts, many carriers allow you receive SMS via an email address - i.e. <your_number>@<your_carrier>

Cisco Prime Infra 2.2 + Third Party Inventory and configuration backup

Hi All,
I am having a doubt related to Cisco prime solution capability to do a discovery and config backup for non-cisco devices.
Requirement is to use Cisco prime to do a discovery, inventory and take configuration backup for non-cisco devices. Is it something possible out of the box ?
If not possible out of the box, is there any method to do that using any custom API ?
Can we monitor 3rd party( Non-cisco) devices using Cisco Prime 2.2 ?
Skr

Hi,
Below is supported-device list, check if your device is listed there.
http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information

Cisco Prime Infra 2.1 Standard Install using OVA File HD Requirements

   Hi guys,
       I wanna install the Cisco Prime Infra Standard 2.1 using the OVA File but I haven't 900 HD Space continuous in Storage.
   Two questions
       01) The Virtual Machine allocate this space (900 HD) during the install or allocate dynamically as needed ?
       02) There is a option to install the Standard Version using less HD space ?
      Thanks
      My Best Regards
      Andre Gustavo Lomonaco

Initially we installed medium when Prime 2.0 came out, however about 3 months lately we needed to upgrade to standard/pro. Upgrading the CPU/Core was seamless
Install a smaller OVA with enough cpu/cores for the standard and just add disk space later on
https://supportforums.cisco.com/document/9871606/adding-disk-space-prime-infrastructure
Its not a recommended practice but there are work around...

Can Cisco Prime Infra 2.1 work as syslog server

Hello all,
Customer want Cisco Prime Infra 2.1 to work as syslog server. they want to query text in syslog and get raw log file from Cisco Prime Infra. but when i see in user interface. I think that it cannot query and search text in syslog. but i am not sure whether we can get raw log file per devices from Cisco Prime Infra. Can anyone know about this.?
thanks
sompoj

Hi Sompoj,
In the prime infrastructure Syslogs are directly read from udp port 514 and then filtered
, the non SEV1 and SEV2 syslogs will be dropped and will not be entered into db . The
syslog messages will not be saved into log files .
Thanks-
Afroz
****Ratings Encourages Contributors ****

The best way to connect wireless and wired for a WRT160N.

It took me about 4 hours to find out how to connect wireless and wired to a network using model WRT160N. Here is what I have done. First install the CD when it says there is not connection connect your PC, Modem and router Andy any wireless are wired products, after that do what the linksys advisor tells your which is default. When it gives you the security key write it down because you will need it for your wireless and wired Products. Under security mode type your SDD name and where key 1 is type your security password with was given to you. Remember all you wireless products have to have the same SDD Like Linsys and all your wired products have to have a different name like Linsys2 but your Key 1 numbers has to stay the same. That is all you have to do. Remember that wireless and wired has to be in sequence. That should do it.

Hi David Hamilton1;
I guess that all depends on how critical your data is in relation to how much time you want to spend doing the erasure. Those higher level erasure options can take a significant amount of time to complete. Personally I don't have anything on my Mac that I think is worth more time then a simple erasure even if that does leave it some what recoverable. To me it seems some people are going overboard on this issue.
Allan

I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections. How do I get the two networks to connect?

I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections. How do I get the two networks to connect to each other?

Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl This way I can just use one of the LAN outputs from the Airport to feed the FVS318. Here is what I think I am hearing you say:
Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
To remedy the situastion here is probably what I need to do in order:
1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
2. Then, disable the Netgear FVS318G as a DHCP server.
3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
4. Restart everything.
Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict? I have the Airport Utility. I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
Thank you.
Steve

Preferred tools to monitor firewalls for performance and capacity managment

What is your prefered tool for monitoring firewalls for performance and capacity managment? We have Cisco's Health and Performance Monitor but it does not provide historcal or trending information.
Thank you,
Sara

Hi,
There are a few commercial products such as:
- Cisco Prime
- Manage Engine
- Solar Winds
There are also free products available such as Cacti and OpenNMS.
Don't forget to rate all posts that are helpful.
Cheers
Sean

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

User exit / BADI for training and event management

Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOI

Hi
BADI's for Training and Event Management
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT      Customer Enhancement: Name Format
RHPV0001 Customer      Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
~~~Ganesh Kumar K.

Configuration documents for Training and event management &apprisals?

hello xperts
can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

Thanks for your suggestions.
i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS. appraisal has to done in the ECC only.
Done the customization like this :
created scales
created appraisal model and assign the scales
for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
Now Appraiser (Manager) from APPCHANGE complete the appraisal.
now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
Please help in this requirement.
Thanks and Best Regards,
Praneeth kumar

Using a WRT54G as a second wireless and wired router on a LAN

I have setup a WRT54G as a second wired and wireless router on my local LAN.
The WAN wired side of the WRT54G is setup completely DHCP. It gets IP 192.168.1.104 most of the time. (I have used a PC with DHCP on theis ethernet wire and it gets to the internet OK).
The LAN side of the WRT54G is setup as 192.168.20.1 and all wireless and wired devices connecting to it get ips of 192.168.20.xxx and communicate between them selfs perfectly. However, none of them can get to the internet through the WRT54G. What have I done wrong?
Thank You

I guess your WRT54G is not connected to Internet directly, but it's connected to another router that has Internet access.
If this is the case, you can configure this device as access point/hub only in order to get Internet access from the other router. Ignore the WAN connection on this WRT54G, just connect both router's LAN port with crossover cable.. After that configure the WRT54G's wireless setting. You can get more detailed info on how to do it in following article:
Quick Guide to Configure Wireless Router as Access Point
Hope helps..

I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.

I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.

Disable all Firewalls & Anti-Virus software...try again.

Cisco Prime Infra 2.1 for Wireless and Wired Management

Similar Messages

Maybe you are looking for