Cisco Prime Infra and SMS gateway integration

Hello,
Can anyone point me to right documents or resources to integrate cisco prime infra 2.x with SMS gateway?
Is there any way I can get SMS alerts for critical events in Cisco Prime Infra 2.x?
Any suggestion is highly appreciated.
Regards,
Girish

Not directly.
If you configure PI to email you on alerts, many carriers allow you receive SMS via an email address - i.e. <your_number>@<your_carrier>

Similar Messages

Can Cisco Prime Infra 2.1 work as syslog server

Hello all,
Customer want Cisco Prime Infra 2.1 to work as syslog server. they want to query text in syslog and get raw log file from Cisco Prime Infra. but when i see in user interface. I think that it cannot query and search text in syslog. but i am not sure whether we can get raw log file per devices from Cisco Prime Infra. Can anyone know about this.?
thanks
sompoj

Hi Sompoj,
In the prime infrastructure Syslogs are directly read from udp port 514 and then filtered
, the non SEV1 and SEV2 syslogs will be dropped and will not be entered into db . The
syslog messages will not be saved into log files .
Thanks-
Afroz
****Ratings Encourages Contributors ****

SMS gateway integration with UCCX 7.0

I have a question, can we perform SMS gateway integration with Cisco Unified Contact Center Express 7.0 premuim license?

Just to enhance Somar's response a bit: The CCX Premium licnese activates an SMTP subsystem in CCX. This allows you to send emails from within a script. As long as the SMS gateway can accept SMTP you should be able to make it work.

Cisco Prime Infra 2.1 Standard Install using OVA File HD Requirements

   Hi guys,
       I wanna install the Cisco Prime Infra Standard 2.1 using the OVA File but I haven't 900 HD Space continuous in Storage.
   Two questions
       01) The Virtual Machine allocate this space (900 HD) during the install or allocate dynamically as needed ?
       02) There is a option to install the Standard Version using less HD space ?
      Thanks
      My Best Regards
      Andre Gustavo Lomonaco

Initially we installed medium when Prime 2.0 came out, however about 3 months lately we needed to upgrade to standard/pro. Upgrading the CPU/Core was seamless
Install a smaller OVA with enough cpu/cores for the standard and just add disk space later on
https://supportforums.cisco.com/document/9871606/adding-disk-space-prime-infrastructure
Its not a recommended practice but there are work around...

Cisco Prime network and cisco prime infrastructure

Hi,
What is the difference between Cisco Prime Network and Cisco Prime infrastructure.
Please advice.

I assume you are asking about Cisco Prime LAN Management System (LMS) vs. Cisco Prime Infrastructure (PI).
LMS is currently the leading Cisco offering for wired infrastructure management. It is the evolution of the earlier CiscoWorks LMS, CiscoWorks RWAN CiscoWorks 2000, CWSI, VLAN Director, original CiscoWorks classic etc. products going back almost 20 years.
PI is the equivalent Cisco offering for wireless LANs and is the successor to NCS and WCS products.
The overlap and confusion comes from the fact the Cisco is positioning PI as the overall wireless and wired management platform and gradually introducing wired network management features to make it equal (and eventually exceed) LMS's capabilities.
There is a comparison table here that shows the current differences. A major new release of PI (2.0) is due out shortly which will close many (but not all) of the gaps on that table.

Difference between cisco prime infrastructure and cisco WCS

Can you explain me difference between cisco prime infrastructure and cisco WCS.. I'm little bit confuse...
Thanks..

Hi Hasan,
In terms of features...You can say PI is more advanced version of WCS and NCS. All the stuff possible in WCS/NCS can be done on PI as well.
But from the architecture perspective , there are differences. If I remember correctly , WCS is based on 32 bit OS while NCS and PI based on 64 bit OS. For the same reason you cannot do inline upgrade from WCS to PI via any path and will have to change the platform/Hardware itself before moving to PI. However , inline upgrade from NCS to PI is possible if we follow the correct path.
Regards
Dhiresh
**Please rate helpful posts**

Cisco Prime Infra 2.1 for Wireless and Wired Management

Hi All,
I've two CPI 2.1 physical appliances running in HA mode. Currently they are used to manage Wireless infrastructure.
Now, we are planning to buy licenses and add wired devices to CPI.
We've two separate teams. Team-A manages Wireless only and Team-B manages Wired infrastructure.
Both teams want their own Admin accounts to access CPI and they don't want to use shared credentials. If Team-A logsin with their Admin Account, they should see Cisco Prime Infrastructure dashboard and if Team-B logs in with their own Admin Account, they should see CiscoWorks LMS Dashbaord.
How can we achieve this? I can create user accounts and provide access to the CPI, but I'm not sure how to specify which dahsboard they will get access to.
Thanks,
CJ

You should consider merging team doing wired & wireless, it is difficult to manage these individually.
By any chance if you deploy 3850/3650, it is both WLC & Switch, so managing by two different teams does not make sense.
HTH
Rasika

Cisco Prime Infra 2.2 + Third Party Inventory and configuration backup

Hi All,
I am having a doubt related to Cisco prime solution capability to do a discovery and config backup for non-cisco devices.
Requirement is to use Cisco prime to do a discovery, inventory and take configuration backup for non-cisco devices. Is it something possible out of the box ?
If not possible out of the box, is there any method to do that using any custom API ?
Can we monitor 3rd party( Non-cisco) devices using Cisco Prime 2.2 ?
Skr

Hi,
Below is supported-device list, check if your device is listed there.
http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information

Cisco Prime Infra 1.2 Web server

Hello,
I have installed a version of Cisco Prime Infrastructure 1.2.11 with a kickstart .ova file on my production network.
Everything goes fine and I follow the instructions for installation ; i can ping my Cisco PI server and ssh into it as admin.
However, when I try to reach the web server via https, it does not work. I have reviewed my proxy settings and they are not to blame. The nslookup returns the IP address when I poll it. I have read elsewhere that I would need "NCS" service to be started, but I can't find anything called NCS on my Prime Infra server in CLI mode.
Anyone with a suggestion for this issue ?
Thanks
Jeremy

Actually I know what's happening ; the PnP (plug n play) setup was not configured, and so 443 port was not up.
I configured PnP using "pnp setup" command, but then I have to supply a list of certificates and keys :
Enter absolute pathname of PnP Gateway server key file:
Enter absolute pathname of PnP Gateway server certificate file:
Enter absolute pathname of Prime Infrastructure server certificate file:
I tried to do this with the private key I had for my server. I created it on my Certificate Authentication and got a .key and a .csr (certificate server request).
However when i feed them to my PnP setup I get this error :
Setup is in progress.......
Stop PnP Gateway server
OpenSSL command failed for mycert.csr and mykey.key
any idea as to why this is happening?
I read elswhere again that i need to run commands with "ncs" but I don't have "ncs" commands on my prompt...
Thank you for your time

Cisco Prime Infrastructure and VLAN fetch

I have about a dozen systems which are showing up under the Archive Failed Devices section of Device Work Center -> Configuration Archives. The reason is Fetch VLAN configuration - Command failed. All of the affected devices have something in common in that they are all managed by hitting a publicly routable IP address outside of the network on which the NCS server lives (NCS IP is 172.19.40.51). To the devices, NCS looks like it is coming from an publicly routable IP address (because it is NAT'd by the firewall). I suspected that the issue was that NCS was trying to TFTP the VLAN.dat file to the NCS server but that it was trying to send it to 172.19.40.51 instead of the NAT address. I turned on debugs on one of the affected devices and sure enough I see that the device is trying to TFTP something to 172.19.40.51. Of course that will never work. I can find no way within the Admin UI of Cisco Prime to change this behavior such that NCS will try to collect the VLAN.dat file in some other way or use the NAT'd IP address for the copy attempt.
Is there a way to get it to use something other than TFTP? Is there some way to turn this off entirely so that it doesn't show up in the Archive Failed Devices section? Prime seems to be able to parse the VLANs by way of the configuration file (since we use transparent mode throughout) so it seems like an extra step I don't need.

Marvin,
This is where everything goes off the rails for me when it comes to understanding Prime Infrastruction, Prime LMS and everything that you're talking about. Refer to this link: http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-lan-management-solution/data_sheet_c78-697479.html
How should I interpret this?:
"Cisco Prime Infrastructure 1.1 bundles campus switch, branch, core routing, and wireless LAN management into a single, easy-to-order solution that enables businesses and enterprises unparalleled operational efficiencies and investment protection. The bundle consists of:
● Cisco Prime LAN Management Solution, which delivers simplified management of Cisco® Borderless Networks and reduces operations costs by aligning network management functionality the way network operators do their jobs
● Cisco Prime Network Control System, which provides complete wireless LAN management with converged user and access management, and integrated lifecycle management of branch routers
For more information about Cisco Prime Infrastructure, please visit http://www.cisco.com/go/primeinfrastructure."
Am I wrong to assume that the first bullet point, which states "Cisco Prime LAN Management Solution" is referring to Prime LMS 4.2?
Thanks,
Steven

CISCO PRIME INFRA 1.1 License

Hai Recently, we are installing cisco Prime NCS 1.1 and we are facing some issue for License.
I would like to clarrify the below licneses.
L-WCS-NCS1-M-K9
L-PINCS11-300-U
L-PINCSW11-300-U
We installed the second licnese and got 300 device limit. But we have 500 access points in our network. We are using NCS only for Wireless Management and not for Network Devices which is using LMS .
I am confused, we have additional 2 more licenses as above and why is that for??? can any one let me know these!!! Y we are using WCS-NCS license and it is having lonly 25 device limit support , which we cannot import since i already upload the second licnes. Also y this L-PINCSW11-300-u WAN license used for????

You can always remove the license if you installed the wrong license....You need to install your base first then your adder. You don't need to use the LMS or WAN as this comes free with NCS 1.1. The WCS to NCS migration comes with a free 25 ap base license. You just need to make sure you have purchased the correct license to cover your 500 ap count.
Here is another thread regarding the license:
https://supportforums.cisco.com/message/3672947#3672947
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Cisco Prime Infrastructure and no new events / alarms since update to 2.2.1

Hello,
I have upgraded our Cisco Prime Infrastructure from version 2.1 to 2.2.1 (with a backup and restore). We have round about 700 APs and three 5208 Controller. So far everything seems to work really fine. The only problem is that there are no new alarms/events under "Monitor", "Alarms and Events".
The last entries (events and alarms) are dated before the upgrade. Other informations (like client counts for example) are correct.
Is there a known bug related to my problem? Can anybody help?
Thanks

I have done some research:
I see the following problems in the log-package (downloaded from Prime):
===
<msg time='2015-04-07T12:10:50.620+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='rzprime' host_addr='xxx.xxx.xxx.xxx' module='JDBC Thin Client'
pid='9499'>
<txt>ORA-1652: unable to extend temp segment by 128 in tablespace TS_EVENTS
</txt>
</msg>
<msg time='2015-04-07T12:10:50.727+02:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='rzprime' host_addr='xxx.xxx.xxx.xxx' module='JDBC Thin Client'
pid='15177'>
<txt>ORA-1652: unable to extend temp segment by 128 in tablespace TS_EVENTS
</txt>
</msg>
===
I think that there is a problem with a too small tablespace. But I can´t fix that. Anybody? ;)

Cisco Prime Infra 2.1 fails to import an image from file

We have a standard Cisco Prime Infrastructure 2.1 install. The software repository has been built up by importing the IOS images from the discovered network devices. To implement netflow capabilities on some 3750X switches we need to upgrade the IOS on the chassis and the NM card C3KX-SM10G. I was able to download from Cisco Support the 3750X IOS .tar file and import it from my machines local file system. However, the modules tar file c3kx-sm10g-tar.150-2.SE6.tar fails on the upload from my local file system. When I look at the import rob results they are as follows:
Image collection from source SUCCESS
Copying Image to Staging Location SUCCESS
Copying Image to Repository FAILURE
I've tried to import just the .bin file but this also fails at the same stage as above.
I've also tried to scp the file directly into the backend file structure with no success into the folder /opt/CSCOlumos/conf/ifm/swim/jobs with the other images (oddly noticed the above .tar file for the 3750X isn't listed with the other .bin files - although is available through the webGUI).
I need to distribute the NM .tar file across multiple switches and I'd prefer to use Cisco Prime for the job. Any help would be gratefully received.
Thanks.

I had (still have?) the same problem with it not copying the image over. I put in a ticket and they told me to upgrade to Prime Infrastructure 2.1-Device Pack 4 pi_2.1device_packs_4-40.ubf which helped but it still fails sometimes.
I had read a post from another thread about going through software image management to distribute and that seems to work a little better, but still fails sometimes.
So I think that there are still quite a few issues in Prime that need worked out.
We have over many switches that need software upgrades and I was hoping to do it quickly through Prime but I don't want to send out more then one image at a time to switch because I don't want it to fail. So it's a drawback right now, just doing one at a time to make sure it takes.

Cisco Prime Collaboration and SIP Codes

I am trying to position Cisco Prime Collaboration with a Cisco CUBE router and the client wants to know if Prime will be able to do the following:
1) Scan, index and alert on configurable SIP 4xx, 5xx, 6xx
2) Look at acive inbound/outbound calls

Hello Varda,
It seems as the 1040 sensors are not finding the TFTP server. The TFTP server list should not contain the ipaddress with values 32 or 92 in their octets,
1. The 1040 needs to learn of the TFTP by DHCP option 150.
2. Please make sure that it is set on your DHCP server.
3. To confirm that the 1040 sensor is receiving the TFTP IP open a web browser and type http:// and see if the TFTP address field is showing the IP.
4. If it is then you might also need to restart the TFTP service on the CUCM so that the 1040 can download the cnf and image files.
Attached is the userguide for 1040. Go through it and this should be able to resolve your issue.
This is a other method to check the sensor is fine
Fist step install download winagents tftp server ,
enter a Service Monitor Server   Configuration / sensor1040 and in TFTP server enter    ip address(winagents tftpserver) and go to SETUP
in setup   put you ip address in PRIMARY SERVICE MONITOR and push OK   you look the server write file in (TFTP server )
Next STEP
Go to MANAGEMENT   and add new sensor you need mac address remember second port in sensor is span port you can make a sencond file in the tftp server
Next STEP
go to service monitor server and copy file *.img CSCOpx/
Next STEP
Search you dhcp server switch     option 150 in put your ip address tftp server when sensor power off and power on the sensor search tftp server and search files to autoconfig and register to service monitor when test is ok
its time to upload change winagent tftp server to callmanager tftp server
Hope this helps
Thanks & Regards,
Venkitesh

Cisco Prime UPMDbMonitor and UPMProcess shutdown

Hi,
I have a Cisco Prime LMS 4.1 in soft appliance, all process are running in normal state and suddenly
UPMDbMonitor and UPMProcess are in a Administrator has shut down this server state. Why is this happen?
I start again these two processes and stay in normal state, but some time later they come down (Administrator has shut down this server)
Thanks

Hi,
Enclosed you will find both files requested. I have been checking the behavior of the processes and viewing some features about LMS and something else is affected for these processes, I have an error in My Menu > Monitoring showing Sybase Odbc Driver Sql Anywhere Communication Error in Interface Availability, Top N interface utilization, Top N Interface Errors and Top N interface Discards.
Regards.

Cisco Prime Infra and SMS gateway integration

Similar Messages

Maybe you are looking for