Cisco Prime Infrastructure 1.3 Web Log Invalid user password

Hi,
I recently installed Cisco Prime Infrastructure 1.3 per the set up guide. I was able to login into the webinterface.
Then I insert the radius server and reload ncs. Since then I'm not able to login to the web interface. I get the following error message "Invalid Username or Password. Please try again". Even when I set the ncs root user with a new password. One issue could be that i forgot the enable fallback to local.
Is there a way to change the radius config back via cli?
Thanks a lot
Hansruedi

Hi Hansruedi,
Thanks you for your help and your time.
I followed your recomandation until the fourth step.
But after this step,  I lost the web page connection.
I check nsc status but all is running :
NMS still stopped. NMS must be running to have an access by web page ?
I restart Prime (by reload command) but nothing changed.
Thanks

Similar Messages

  • Cisco Prime Infrastructure 1.3 Web Log In Error

    Hi,
    I recently installed Cisco Prime Infrastructure 1.3 per the set up guide. I am able to log into the VM back end but when I try to log into the web interface with the admin account I get the following error message "Invalid Username or Password. Please try again". I verified that the username and password are correct but I still can not get in.

    I think there is some bug (or feature) that makes that the accounts defined during setup are not valid in the web gui.
    Since the users I created using CLI, work when I SSH into the PI 1.3, I know they are correct.
    Clearly the web part uses a different way to authenticate users. I'm told all this worked just fine in PI 1.2, so not sure what cisco is up to.
    To resolve this use the root account to login in the web interface.
    It has the same pw as the admin user.
    There you can create an admin account (and or others)
    Cheers,
    Michel

  • Cisco Prime Infrastructure 1.2 - web browser freezes when managing rogue APs alarms

    Hello all,
    has anybody faced a freezing problem when you click in Cisco Prime Infrastructure 1.2 down on alarm bar and then to Rogue AP alarms and then try to add an annotitation or change a rogue alarm to Friendly?
    I tried it on different PC, different browsers (Firefox 14.0.1. Chrome ...) and the problem is still there.
    Has anybody an idea?
    Thanks.
    Regards
    Karel

    I just tried it from my lab VM and had no problems.  I use Chrome and the browser does sometimes not refresh for a while but that is just when I start to  click around.
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Some question about Cisco Prime Infrastructure

    Dear all
    I have some question about using Cisco prime Infrastructure:
    - Can I show how many user access to one Access Point (AP) ?
    - If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
    - How many time do Cisco Prime Infrastructure refesh user  informantion .?
    Please help me and send picture about it if you can.
    Thank you so much.

    Hi,
    I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
    http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
    1- You can surely find how many clients associated to a specific AP.
    - Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
    3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
    HTH
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • Collecting logs from Cisco Prime Infrastructure

    Hi ,
    I am currently working in integrating  Cisco Prime Infrastruture with the siem tool Qradar.
    Can any one help me out in below issues:
    1)How and where is the log stored in Cisco Prime.?
    2)Does the logs contains the logs of the devices that Cisco Prime manages?
    3)Is there any way to sent out the logs from Cisco Prime to a third party device.?

    Hi,
    1)How and where is the log stored in Cisco Prime.?
    /opt/CSCOlumnos/logs
    2)Does the logs contains the logs of the devices that Cisco Prime manages?
    AFAIK,
    In the prime infrastructure Syslogs are directly read from udp port 514 and then filtered
    , the non SEV1 and SEV2 syslogs will be dropped and will not be entered into db . The
    syslog messages will not be saved into log files .
    Till now PI support only SEV 0,1 and 2 syslog.
    3)Is there any way to sent out the logs from Cisco Prime to a third party device.?
    unfortunately , this feature is not there in PI so far.
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Web Interface of Cisco Prime Infrastructure Not Working

    Hi All,
    I installed the trial version of Cisco Prime Infrastructure 1.2 on ESXi server.
    It installed propersly and and i am able to ping it and also ssh into it.
    But when I try to access it via web interface, it does not work.
    I am provided with a login screen but after putting my credentials the page goes blank.
    There also an error on the page "Error occured while fetching Meatdata for Slider Panel" and there is a advertisemnt to download Google chrome Framework.
    When i do "NCS status" in CLI i see that every service is running.
    Does anyone know how to solve this.
    All your help is highly appreciated.                   

    Google Chrome Frame isnt supported anymore, using Google Chrome doesnt work with all features and forget about Firefox. Up until this morning I had it working on IE11 but some update caused me to have this problem again. Cisco needs to get this fixed. I use several applications from Cisco and they still can't figure out a way to have them all work on a single browser.

  • Cisco Prime Infrastructure 1.3 Template Application Logs

    So I'm pushing out a config template to my APs via CPI1.3 (Configure, Lightweight AP Configuration Templates; select template; select my APs, Apply).
    I get a "Partial Success" to a few of my APs. When I hit "Details" for these partial successes I get precious little details.
    So I go to check the server/appliance log (Administration, Logging, Download Log File). The log "file" is an archive of all logs on the appliance. All are in one folder of the archive, and the names are less than enlightening. Checking the most promising filenames does not seem to contain anything relevant to the push task.
    So, which log file do I look into for actual details of the results of an AP configuration template push?

    Using System Logs
    Prime Infrastructure logs all error, informational, and trace messages generated by all devices that are managed by Prime Infrastructure.
    Prime Infrastructure also logs all SNMP messages and Syslogs it receives.
    You can download and email the logs to use for troubleshooting Prime Infrastructure.
    Step 1 Choose Administration > Logging. The General Logging Options Screen appears.
    Step 2 Choose a Message Level.
    Step 3 Check the check boxes within the Enable Log Module option to enable various administration modules. Check the Log Modules option to select all modules.
    Step 4 In the Log File Settings portion, enter the following settings. These settings will be effective after restarting Prime Infrastructure.
    Note The log file prefix can include the characters "%g" to sequentially number of files.
    Step 5 Click the Download button to download the log file to your local machine.
    Note The logs.zip filename includes a prefix with the host name, date, and time so that you can easily identify the stored log file. Included in the zip file is an html file that documents the log files.
    Step 6 Enter the Email ID or Email IDs separated by commas to send the log file.
    Note To send the log file in a mail you must have Email Server Configured.
    Step 7 Click Submit.

  • Web interface on Cisco Prime Infrastructure express not coming up

    Trying to get Cisco Prime Infrastructure express installed. The installation completes without any error but when I try to run show NCS or attempt to start stop the service get the following output
    usdayt-cis-002/admin# show application status NCS
    % Application NCS is not installed
    usdayt-cis-002/admin# ncs start
    sh: /opt/CSCOlumos/bin/wcsadmin.sh: No such file or directory
    here's the output from show inventory
    usdayt-cis-002/admin# show inventory
    NAME: "Cisco-VM chassis", DESCR: "Cisco-VM chassis"
    PID: Cisco-VM-SPID     , VID: V01 , SN: 1GP9SNNE5HJ
    Total RAM Memory: 16304916 kB
    CPU Core Count: 8
    CPU 0: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
    CPU 1: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
    CPU 2: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
    CPU 3: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
    CPU 4: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
    CPU 5: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
    CPU 6: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
    CPU 7: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
    Hard Disk Count(*): 1
    Disk 0: Device Name: /dev/sda
    Disk 0: Capacity: 314.50 GB
    Disk 0: Geometry: 255 heads 63 sectors/track 38244 cylinders
    NIC Count: 1
    NIC 0: Device Name: eth0
    NIC 0: HW Address: 00:50:56:AF:76:34
    NIC 0: Driver Descr: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    (*) Hard Disk Count may be Logical.
    usdayt-cis-002/admin# show disks
    disk: 1% used (184324 of 44628400)
    temp. space 2% used (35792 of 1967952)
    Internal filesystems:
      all internal filesystems have sufficient free space
    any idea what could be the issue here?

    OK, that's the correct one. Can you verify the checksum of the file? It should be:
         91dc6ebc446c1c9c000c69af4be93102
    If that's OK, I would delete the VM and try installing the ova once more.
    Other than that, I'd suggest calling the TAC if it's a supported installation (i.e. not an evaluation copy).

  • User Name and Password for Cisco Prime Infrastructure 2.1

    Hi all:
    I am stuck at the login page of Cisco Prime Infrastructure 2.1.
    I have tried using the user name root and its password (when log in with root at Vsphere Client) and also the login user name "before" get into the appliance infrastructure, all cannot work.
    Anybody knows what is the default username or password or any way to set the username and password for this Cisco Prime Infrastructure 2.1 website?
    Thanks!
    tangsuan

    Hi Tangsuan,
    Following is the documented procedure for password recovery..
    In order to modify the GUI root user password, you will need to login to the NCS CLI
    as an admin user, and enter the command
    "ncs password root password <new password>" (without the quotes)
    This should set the web interface root user password :
    http://www.cisco.com/en/US/docs/wireless/ncs/1.1/configuration/guide/manag.html#wp1268889
    If you have lost your CLI password , try the default logging that is  ,
    CLI user is admin and not root, so please try logging in as admin with
    the password that was set during setup. If that does not work , you need
    the install disk that came with the appliance to recover that password.
    Follow these steps:
    Recovering a Lost Admin Password
    If you lose or forget the admin password for NCS appliance, follow these steps.
    Step 1 Reboot the NCS appliance with the ISO DVD inserted. The Cisco Prime Network Control
    System Welcome screen appears:
    ISOLINUX 3.11 2005-09-02  Copyright (C) 1994-2005 H. Peter Anvin
                 Welcome to Cisco Prime Network Control System
    To boot from hard disk, press <Enter>.
    Available boot options:
       [1] Network Control System Installation (Keyboard/Monitor)
       [2] Network Control System Installation (Serial Console)
       [3] Recover administrator password. (Keyboard/Monitor)
       [4] Recover administrator password. (Serial Console)
    <Enter> Boot existing OS from Hard Disk.
    Enter boot option and press <return>.
    boot:
    Step 2 Select the desired recovery option, 3 or 4, depending on how you
    are connected to the appliance and then follow the prompts.
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Cisco Prime Infrastructure 2.0 - no traps/info are pushed from devices

    Good evening,
    I have setup Cisco Prime Infrastructure 2.0 and,  though I have added manually my 4 network cores as devices without any  problem, I can't get a single trap or a single SNMP information to be  pushed into my Cisco Prime Infra.
    Here is my SNMP config on my core :
    snmp-server user *edited* *edited* v3
    snmp-server  group *edited* v3 noauth notify  *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F
    snmp-server community *edited* RO
    snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
    snmp-server enable traps flowmon
    snmp-server enable traps transceiver all
    snmp-server enable traps call-home message-send-fail server-fail
    snmp-server enable traps tty
    snmp-server enable traps rf
    snmp-server enable traps memory
    snmp-server enable traps cpu_threshold
    snmp-server enable traps eigrp
    snmp-server enable traps ospf state-change
    snmp-server enable traps ospf errors
    snmp-server enable traps ospf retransmit
    snmp-server enable traps ospf lsa
    snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
    snmp-server enable traps ospf cisco-specific state-change shamlink interface
    snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
    snmp-server enable traps ospf cisco-specific errors
    snmp-server enable traps ospf cisco-specific retransmit
    snmp-server enable traps ospf cisco-specific lsa
    snmp-server enable traps flex-links status
    snmp-server enable traps fru-ctrl
    snmp-server enable traps entity
    snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
    snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
    snmp-server enable traps ether-oam
    snmp-server enable traps aaa_server
    snmp-server enable traps flash insertion removal
    snmp-server enable traps l2tc threshold sys-threshold
    snmp-server enable traps power-ethernet police
    snmp-server enable traps rep
    snmp-server enable traps vswitch dual-active vsl
    snmp-server enable traps udld link-fail-rpt status-change
    snmp-server enable traps vtp
    snmp-server enable traps vlancreate
    snmp-server enable traps vlandelete
    snmp-server enable traps auth-framework sec-violation
    snmp-server enable traps dot1x auth-fail-vlan guest-vlan no-auth-fail-vlan no-guest-vlan
    snmp-server enable traps envmon fan shutdown supply temperature status
    snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail
    snmp-server enable traps port-security
    snmp-server enable traps ethernet evc status create delete
    snmp-server enable traps energywise
    snmp-server enable traps ipsla
    snmp-server enable traps vstack
    snmp-server enable traps bfd
    snmp-server enable traps bgp
    snmp-server enable traps bulkstat collection transfer
    snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
    snmp-server enable traps config-copy
    snmp-server enable traps config
    snmp-server enable traps config-ctid
    snmp-server enable traps event-manager
    snmp-server enable traps hsrp
    snmp-server enable traps ipmulticast
    snmp-server enable traps isis
    snmp-server enable traps msdp
    snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
    snmp-server enable traps bridge newroot topologychange
    snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency
    snmp-server enable traps syslog
    snmp-server enable traps isakmp policy add
    snmp-server enable traps isakmp policy delete
    snmp-server enable traps isakmp tunnel start
    snmp-server enable traps isakmp tunnel stop
    snmp-server enable traps ipsec cryptomap add
    snmp-server enable traps ipsec cryptomap delete
    snmp-server enable traps ipsec cryptomap attach
    snmp-server enable traps ipsec cryptomap detach
    snmp-server enable traps ipsec tunnel start
    snmp-server enable traps ipsec tunnel stop
    snmp-server enable traps ipsec too-many-sas
    snmp-server enable traps errdisable
    snmp-server enable traps ethernet cfm alarm
    snmp-server enable traps vlan-membership
    snmp-server enable traps mac-notification change move threshold
    snmp-server enable traps vrfmib vrf-up vrf-down vnet-trunk-up vnet-trunk-down
    snmp-server host *ip-address-edited* version 3 noauth *edited*
    Basically all traps are enabled but absolutely nothing is showing up in my Prime Infra except that my 4 devices are "Reachable".
    Here is a show snmp on the same device :
    sh snmp
    Chassis: *S/N Edited*
    38554534 SNMP packets input
        0 Bad SNMP version errors
        14 Unknown community name
        0 Illegal operation for community name supplied
        0 Encoding errors
        38453185 Number of requested variables
        0 Number of altered variables
        17790703 Get-request PDUs
        20583581 Get-next PDUs
        0 Set-request PDUs
        0 Input queue packet drops (Maximum queue size 1000)
    38490708 SNMP packets output
        0 Too big errors (Maximum packet size 1500)
        0 No such name errors
        0 Bad values errors
        0 General errors
        38371069 Response PDUs
        13 Trap PDUs
    SNMP global trap: enabled
    SNMP agent enabled
    SNMP logging: enabled
        Logging to *edited*, 0/10, 13 sent, 0 dropped.
    Can anyone point out what is wrong or missing in my configuration? I can't seem to single it out myself.
    Thanks
    Jeremy

    Hi Jeremy,
    SNMP traps are shown in the events and alerts section of PI.
    SNMP config looks fine. Can  you run the SNMP debug (debug snmp packets ) .check the logs and see if the device is actually sending the TRAPS to the PI server.
    Thanks-
    Afroz
    [Do rate the useful post]
    ****Ratings Encourages Contributors ****

  • Upgrade NCS 1.1.1.24 to Cisco Prime Infrastructure 1.2

    Having a problem installing the ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz patch file on a virtual NCS before upgrading it to Cisco Prime Infrastructure 1.2.
    I've followed the Cisco Prime Infrastructure 1.2 Quick Start Guide and did not had the same success as described in the document (see below):
    gmsncs/admin# dir disk:defaultRepo/
    Directory of disk:defaultRepo/
      508376482 Sep 13 2012 05:38:25  backup-20120913-0530.tar.gpg
      853768584 Sep 20 2012 05:40:17  backup-20120920-0530.tar.gpg
         127019 Sep 26 2012 16:40:58  ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
               Usage for disk: filesystem
                     1544204288 bytes total used
                    27185573888 bytes free
                    30293413888 bytes available
    gmsncs/admin# patch install disk:defaultRepo/ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz defaultRepo
    Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
    Generating configuration...
    Saved the ADE-OS running configuration to startup successfully
    Initiating Application Patch installation...
    % Local file not found
    Anybody experience with this procedure.
    Thank You
    --- Update ---
    Skipped Step 4 and followed Step 5 in the Quick Start Quide, however now I receive a diffrent error:
    gmsncs/admin# dir disk:/defaultRepo
    Directory of disk:/defaultRepo
      926193986 Sep 26 2012 17:48:12  GRDbackup-120926-1736.tar.gpg
      508376482 Sep 13 2012 05:38:25  backup-20120913-0530.tar.gpg
      853768584 Sep 20 2012 05:40:17  backup-20120920-0530.tar.gpg
         127019 Sep 26 2012 16:40:58  ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
               Usage for disk: filesystem
                     2471309312 bytes total used
                    26258468864 bytes free
                    30293413888 bytes available
    gmncs/admin# patch install GRDbackup-120926-1736.tar.gpg defaultRepo
    Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
    Generating configuration...
    Saved the ADE-OS running configuration to startup successfully
    Initiating Application Patch installation...
    % Manifest file not found in the bundle
    gmsncs/admin#

    Hi, Thank you again for your help, but I am still stuck. I have gathered the outputs from ncs start and a ncs status afterwards. Currently I am not able to access the web-UI of NCS..
    deberncs01/admin# ncs startStarting Network Control System...This may take a few minutes...Dependency Check Failed: Matlab is not running.Dependency Check Failed: Ftp is not running.Dependency Check Failed: Tftp is not running.Failure during Network Control System startup.  Check launchout.log for details.startdeberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin# ncs statHealth Monitor is running, with an error.failed to start NCS on startup Health MonitorReporting Server is StartingFtp Server is FailureDatabase server is stoppedTftp Server is runningMatlab Server is runningNMS Server is stopped.SAM Daemon is not running ...DA Daemon is not running ...Syslog Daemon is not running ...statusdeberncs01/admin#
    Anyone got a clue on that? and where can I find that launchout.log on NCS? Thank you

  • WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade

    Hello,
    Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
    I want to check is the upgrade procedure that we have planned is ok or we have missed something.
    Phase 1: WCS to CPI 1.3 upgrade
    1. Check that WCS is at 7.0.230.0  version
    2. Export WCS database
    3. Install NCS 1.1.1.24 software
    4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
    5. Migrate WCS license and import it in NCS software
    6. Migrate WCS data to NCS software using ncs migrate command
    7. Patch NCS software
    8. Inline upgrade to CPI 1.3 software
    9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
    My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
    Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
    Phase 2: LMS 3.2 to CPI upgrade
    1. Export LMS 3.2 database
    2. Install LMS 4.2 software
    3. Install license to LMS 4.2
    4. Restore data from LMS 3.2 to LMS 4.2
    5. Direct upgrade from LMS 4.2 to 4.2.2
    6. Export the device list with credentials from LMS 4.2.2  and import it as a Bulk Import in CPI 1.3
    At the end we will have CPI 1.3 and LMS 4.2.2 software running.
    Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
    Regards,
    Jelena

    Hello Marvin,
    We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
    [kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
    resolver.pl           restoreDBTableMig.pl  restoreJRMMig.pl      restorebackup.pl     
    [kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
    Restore started at : 2013/12/05 14:11:58
    Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
         USER ID is ..................................... : sysadmin
         OS of the backup archive is..................... : Windows
    INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
    You are attempting to perform a Cross Platform Restore..
    Do you wish to continue (Y/N) [Y] :Y
         Generation to be restored is ................... : 0
         Backup taken from............................... : /opt/BKP/
         Common Services version in the backup data is... : 3.3.1
         Common Services is installed in................. : /opt/CSCOpx
         The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
         Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
         Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
         WARNING: The list of applications installed on this CiscoWorks server does not match the list of
                  applications in the backup archive. If you restore data from this backup archive,it may
                  cause problems in the CiscoWorks applications.
                  Do you want to continue the restore operation?  (y-continue or n-quit, y/n)?Y
         Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
         Available disk space in NMSROOT................. : 86451488 Kb
         Required disk space in NMSROOT.................. : 35906524 Kb
         (The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
      Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
      preRestore of [Common Services] has started.
      preRestore of [Common Services] has completed.
      preRestore of [Campus Manager] has started.
      preRestore of [Campus Manager] has completed.
      preRestore of [Resource Manager Essentials] has started.
      preRestore of [Resource Manager Essentials] has completed.
      preRestore of [Device Fault Manager] has started.
      preRestore of [Device Fault Manager] has completed.
      preRestore of [cwportal] has started.
      preRestore of [cwportal] has completed.
      preRestore of [ipm] has started.
      preRestore of [ipm] has completed.
      preRestore of [upm] has started.
      preRestore of [upm] has completed.
      preRestore of [cvw] has started.
      preRestore of [cvw] has completed.
      doRestore of [Common Services] has started.
              Cross Platform Update started.
              Cross Platform Update completed.
              License check started.
                 WARNING: The license details in the server are different from the backup data.
                          After restoring, please check the license available in the server.
                 WARNING: Your current license count is lower than your earlier license count.
                          If you restore the data now, devices that exceed the current licence count
                          will be moved to Suspended state.
              License check completed.
              Restoring certificate.
                 WARNING: Cannot evaluate the hostname, hence the certificate
                          may be from this host or another host.
                          [  Certificate not overwritten  ]
              Restored Certificate.
              Restoring Common Services database.
              Restored Common Services database.
              Restoring CMIC data.
              Restored CMIC data.
              Restoring CMC data.
              Restored CMC data.
              Restoring Security Settings.
              Restored Security Settings.
              Restoring DCR data.
              Restored DCR data.
              Restoring Certificate key store.
              Restored Certificate key store.
      Restoring DCNM CrossLaunch data.
              Restored DCNM CrossLaunch function.
              Restoring JAAS configuration.
              Restored JAAS configuration.
              JRM Job Migration started.
              JRM job Migration done.
      doRestore of [Common Services] has completed.
      doRestore of [Campus Manager] has started.
              Cross Platform Migration for Campus started.
    Cross Platform update Starts for Campus
      doRestore of [Campus Manager] has completed.
      doRestore of [Resource Manager Essentials] has started.
    10% of RME  Restore completed
    30% of RME  Restore completed
    50% of RME  Restore completed
    70% of RME  Restore completed
    100% of RME  Restore completed
      doRestore of [Resource Manager Essentials] has completed.
      doRestore of [Device Fault Manager] has started.
    10% of DFM Restore completed
    30% of DFM Restore completed
    50% of DFM Restore completed
    80% of DFM Restore completed
    Going to modify Eight PM report 
    Modified Sucessfully Eight PM report 
    100% of DFM Restore completed
      doRestore of [Device Fault Manager] has completed.
      doRestore of [cwportal] has started.
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
      Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties  ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
    File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
      Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script  ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
    File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
      Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log  ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
    File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
      Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties  ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
    File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
      Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties  ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
    File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
    Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
      doRestore of [cwportal] has completed.
      doRestore of [ipm] has started.
            10% of IPM Restore Completed
            30% of IPM Restore Completed
            50% of IPM Restore Completed
            60% of IPM Restore Completed
            70% of IPM Restore Completed
            100% of IPM Restore Completed
      doRestore of [ipm] has completed.
      doRestore of [upm] has started.
    HUM database restore starts
    INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
    SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
    INFO: Database Shutdown is in Progress..Please wait
    INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
    INFO: After Database Shutdown RC= 2304
    root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
    DBUTILS: Inside Cross Platform
    INFO: Current Database password does not match the password of Database being restored
    INFO: Using the Password of the Database being restored
    HUM database restore successfully completed.
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
    File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
    Directory is reportsStarted changing property .
    linux
    Restored HUM configuration file successfully.
      doRestore of [upm] has completed.
      doRestore of [cvw] has started.
      doRestore of [cvw] has completed.
      postRestore of [Common Services] has started.
      postRestore of [Common Services] has completed.
      postRestore of [Campus Manager] has started.
      postRestore of [Campus Manager] has completed.
      postRestore of [Resource Manager Essentials] has started.
      postRestore of [Resource Manager Essentials] has completed.
      postRestore of [Device Fault Manager] has started.
      postRestore of [Device Fault Manager] has completed.
      postRestore of [cwportal] has started.
      postRestore of [cwportal] has completed.
      postRestore of [ipm] has started.
      postRestore of [ipm] has completed.
      postRestore of [upm] has started.
      postRestore of [upm] has completed.
      postRestore of [cvw] has started.
      postRestore of [cvw] has completed.
    Restored successfully.
    Are this errors going to affect our LMS 4.2 operations?
    Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
    On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
    On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
    We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
    Thank you for your help.
    Regards,
    Jelena

  • Cisco Prime Infrastructure 1.2 Error

    Hi,
    I don't have any experience with Cisco Prime infrastructure. I am getting the below error
    Unable to start secondary NCS server PRLPrimeNCS02   [10.140.xx.xx]
    Reason: IO Error: could not resolve the connect identifier   "wcss1"
    Not sure exactly what the error means. Any help much appreciated.
    Thanks
    Nachi

    Hi Scott,
    Thank you for your email.
    The HA is runing on the Cisco Prime. Runing Cisco Prime on a Virtual machine in VM.
    The issue we are experiencing is that the system failed over to the secondary (HA) for unknown reasons. When we failed it back it didn’t fail back properly. Configured Manual failover. Managed to failback to primary but it complained HA was no longer configured.
    Tried to remove HA and reconfigure it. The primary removed the HA configuration, but the secondary kept it. Here is some info on the secondary
    PRLPrimeNCS02/admin# ncs ha status
    [Server] prlprimencs01(10.xx.xx.xxx) [State] Secondary Lost Primary [Failover Type] manual
    PRLPrimeNCS02/admin# ncs ha remove
    High availability configuration will be removed
    Do you wish to continue? (y/N)  y
    Removing secondary configuration will remove all database information
    Do you wish to remove high availability configuration from primary? (y/N)  y
    Secondary is attempting to remove high availability configuration from both primary and secondary
    Requesting primary to remove high availability configuration from both primary and secondary
    Successfully removed high availability configuration
    PRLPrimeNCS02/admin#
    PRLPrimeNCS02/admin#
    PRLPrimeNCS02/admin# ncs ha status
    [Server] prlprimencs01(10.xx.xx.xxx) [State] Secondary Lost Primary [Failover Type] manual
    PRLPrimeNCS02/admin#
    And the primary
    prlprimencs01/admin# ncs ha status
    [State] Stand Alone
    prlprimencs01/admin#
    Below is the log
    Starting Health Monitor as a secondary
    Checking for Port 8082 availability... OK
    truststore used is /opt/CSCOlumos/conf/truststore
    truststore used is /opt/CSCOlumos/conf/truststore
    Starting Health Montior Web Server...
    Health Monitor Web Server Started.
    Starting Health Monitor Server...
    Health Monitor Server Started.
    java.lang.OutOfMemoryError: Java heap space
    Dumping heap to logs/java_pid6044.hprof ...
    Heap dump file created [249907589 bytes in 6.857 secs]
    Thanks
    Nachi

  • Consultations on Cisco Prime Infrastructure 2.2

    I recently installed Cisco Prime Infrastructure 2.2 and I have 2 questions regarding configuration:
    1. What configurations should run for vulnerability when some event occurs on a switch an alarm is lifted in the Cisco Prime Infrastructure 2.2?
    2. Is there any way to put a device into maintenance mode in the web interface of Cisco Prime Infrastructure 2.2, so that can not be spoiled reports regarding equipment availability during the execution of maintenance?

    1. If you configure PI as an SNMP and syslog server for your devices and have enabled logging traps etc., PI's alarm browser will show the alarms. If you want them to be sent to you via email, you can do that under the Admin menu for setting up your Mail server and clicking the link to "Configure email notification for individual alarm categories." (see below - open in new tab to zoom). It's not completely customizable but what you see there is the current product capabilities in that regard.
    2. No, this is not currently an available feature in PI 2.2.

  • Cisco Prime Infrastructure 2.0 and Cisco ASA

    Hello,
    We've recently installed trial version of Cisco Prime Infrastructure 2.0 Express. We hoped that it already supports Cisco ASA 55xx series (especially 5505, we have pretty amount of them). But we had some problems with PI and asa durind the exploitation process.
    First, I've added ASA to PI, and Inventory Collection Status is Completed, but I can't see CPU and RAM utilization graphs. Inventory.logs are non-informative.
    Also, config backup is success, but when I try to watch the backuped configuration at Configuration Archive PI says "Failed to fetch raw configuration". And so on.
    ASA version is 5505, image is 9.1(2).
    So, I have a question: is it possible to manage ASAs with PI 2.0?
    UPD: I've just tried to upgrade asa to 9.1(4), and behavior of the equipment is quite the same. Seems we shall wait for 9.2 to be released.

    Have you downloaded and applied the latest Device Pack updates?
    PI enhanced ASA support after the initial 2.0 release and the Device Packs incorporate that change.
    The README file for Device Packs explains how to install them. (A bug currently does not allow the direct download in PI so you need to follow the method for installation from local storage after you manually download. Here is a link to the download location.

Maybe you are looking for