Cisco Prime Infrastructure 2.1 Inventory Job
My cisco prime infrastructure performs a switch inventory job every night at 22:00 hrs. When I looked at the syslog of the devices in the inventory, I see some entries that I never saw with other LMS versions.
2014-06-30 22:00:01 Local7.Notice xxx.xxx.xxx.xxx 5410: Jun 30 22:00:00.623 CST: %SYS-5-CONFIG_I: Configured from xxx.xxx.xxx.xxx by snmp
2014-06-30 22:00:01 Local7.Notice xxx.xxx.xxx.xxx 5411: Jun 30 22:00:01.567 CST: %SYS-5-CONFIG_I: Configured from console by vty1 (xxx.xxx.xxx.xxx)
2014-06-30 22:05:10 Local7.Notice xxx.xxx.xxx.xxx 5412: Jun 30 22:05:09.008 CST: %SYS-5-CONFIG_I: Configured from console by vty0 (xxx.xxx.xxx.xxx)
I don't understand what the PI is doing with the switches. Does anyone know what is happening during this inventory background job? TIA
Hello all,
we have the same problem maybe; Cisco Prime IF 2.1 is changing the running-configs and produces out-of-syncs ;
it turns so for us is, as if Cisco Prime IF 2.1 a snmp-server host x.x.x.x community entry writes in the running-config,
so are running-and startup-config are out-of-sync; is this correct? Herbert
Similar Messages
-
Cisco prime infrastructure 2.0 inventory SFP
hello,
anyone knows if it is possible with cisco prime infrastructure 2.0 create inventory to obtain data from SFP (serial number and model)?
thank youHi ,
Can you try the below report and see if you are able to see the information , you are looking for
Report > Report Launch Pad > Device > Detailed Hardware
Thanks-
Afroz
***Ratings Encourages Contributors **** -
A job in Cisco Prime Infrastructure 2.1 has been running for 50 days
I found a job (SAM_Poller_22_15_GETVPNPoller_1878262177) in cisco prime infrastructure 2.1 (Administration -> Job Dashboard -> System-defined), which has been running for about 50 days. Is this normal? How can I stop it? Thanks for any help..
SAM_Poller_22_15_GETVPNPoller_1878262177
PollerJob
In-Progress
Running
2014-09-19 01:28
49 Days 01 : 28 : 37Not normal, seems to be stuck. Try to stop (ncs stop) and start (ncs start) the system processes, which should stop this job.
If it happens again, i would recommend to open a TAC case for further investigation.
-Thanks
Vinod -
We're upgrading from LMS 3.2 to Cisco Prime Infrastructure ...
In LMS 3.2 we're using netconfig all the time to configure various jobs related to port security
In installing Cisco Prime Infrastructure and working through it's use of templates, I'm having some difficulty finding out how to send out a notification once a configuration job has completed. It's so simple in LMS 3.2 since it's part of the job creation screens.
Any assistance would be greatly appreciated.HI, Raymond
Just wondering if this problem is resolved?
Thanks! -
Can't import images in cisco prime infrastructure 1.2
- Any job , trying to import images, in my cisco prime infrastructure fails with :
Jan 14 13:14:53 cisco-prime 01/14/13 13:15:18.040 ERROR [service] [pool-4-thread-19] IFM_SWIM_EXCEPTION: [com.cisco.ifm.swim.service.exception.IfmSwimParserException: Cannot populate software image info object from the image.]
How I can I solve this one ?
Tx,
M.I seem to have the same problem, strangely enough importing a universal image for 2960s worked fine, but I get thos error when trying to import a 3750x image
-
Cisco Prime Infrastructure 2.0 and Cisco ASA
Hello,
We've recently installed trial version of Cisco Prime Infrastructure 2.0 Express. We hoped that it already supports Cisco ASA 55xx series (especially 5505, we have pretty amount of them). But we had some problems with PI and asa durind the exploitation process.
First, I've added ASA to PI, and Inventory Collection Status is Completed, but I can't see CPU and RAM utilization graphs. Inventory.logs are non-informative.
Also, config backup is success, but when I try to watch the backuped configuration at Configuration Archive PI says "Failed to fetch raw configuration". And so on.
ASA version is 5505, image is 9.1(2).
So, I have a question: is it possible to manage ASAs with PI 2.0?
UPD: I've just tried to upgrade asa to 9.1(4), and behavior of the equipment is quite the same. Seems we shall wait for 9.2 to be released.Have you downloaded and applied the latest Device Pack updates?
PI enhanced ASA support after the initial 2.0 release and the Device Packs incorporate that change.
The README file for Device Packs explains how to install them. (A bug currently does not allow the direct download in PI so you need to follow the method for installation from local storage after you manually download. Here is a link to the download location. -
Cisco Prime Infrastructure 2.1 - WS-C2940-8TF-S and WS-C2940-8TT-S supported ?
Hello community,
I've got a question just to play safe.
I'm running a Cisco Prime Infrastructure 2.1, we still do have a bunch of WS-C2940-8TF-S and WS-C2940-8TT-S with running images 12.1(22)EA12 , 12.1(22)EA13 and 12.1(22)EA14.
I know these switch types already have a End-of-Sale and End-of-Life Announcement for the Cisco Catalyst 2940-8TT-S and 2940-8TF-S Compact Switches ("http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2940-series-switches/end_of_life_notice_c51-510224.html").
The inventory collection status in the device work Center is for these switch types "Collection Failure", the error message is this one:
An unexpected error has occurred:
# Check the device is in supported device list in deployment guide -> not listed in "http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/release/notes/cpi_rn.html#pgfId-43885"
# Check there is connectivity between the device and PI -> Checked adnd OK
# Check the device credentials provided are valid -> Checked adnd OK
# Finally if the problem still persists then contact Cisco System's technical assistance center -> not done yet, looks like these switch types are not supported any more in PI 2.1 ?
Can anyone confirm this or answer back because these switch types are supported in her/his PI2.1 installation?
Best regards
BastianPrime Infrastructure won't support those legacy models.
-
WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade
Hello,
Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
I want to check is the upgrade procedure that we have planned is ok or we have missed something.
Phase 1: WCS to CPI 1.3 upgrade
1. Check that WCS is at 7.0.230.0 version
2. Export WCS database
3. Install NCS 1.1.1.24 software
4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
5. Migrate WCS license and import it in NCS software
6. Migrate WCS data to NCS software using ncs migrate command
7. Patch NCS software
8. Inline upgrade to CPI 1.3 software
9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
Phase 2: LMS 3.2 to CPI upgrade
1. Export LMS 3.2 database
2. Install LMS 4.2 software
3. Install license to LMS 4.2
4. Restore data from LMS 3.2 to LMS 4.2
5. Direct upgrade from LMS 4.2 to 4.2.2
6. Export the device list with credentials from LMS 4.2.2 and import it as a Bulk Import in CPI 1.3
At the end we will have CPI 1.3 and LMS 4.2.2 software running.
Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
Regards,
JelenaHello Marvin,
We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
resolver.pl restoreDBTableMig.pl restoreJRMMig.pl restorebackup.pl
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
Restore started at : 2013/12/05 14:11:58
Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
USER ID is ..................................... : sysadmin
OS of the backup archive is..................... : Windows
INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
You are attempting to perform a Cross Platform Restore..
Do you wish to continue (Y/N) [Y] :Y
Generation to be restored is ................... : 0
Backup taken from............................... : /opt/BKP/
Common Services version in the backup data is... : 3.3.1
Common Services is installed in................. : /opt/CSCOpx
The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
WARNING: The list of applications installed on this CiscoWorks server does not match the list of
applications in the backup archive. If you restore data from this backup archive,it may
cause problems in the CiscoWorks applications.
Do you want to continue the restore operation? (y-continue or n-quit, y/n)?Y
Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
Available disk space in NMSROOT................. : 86451488 Kb
Required disk space in NMSROOT.................. : 35906524 Kb
(The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cwportal] has started.
preRestore of [cwportal] has completed.
preRestore of [ipm] has started.
preRestore of [ipm] has completed.
preRestore of [upm] has started.
preRestore of [upm] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
doRestore of [Common Services] has started.
Cross Platform Update started.
Cross Platform Update completed.
License check started.
WARNING: The license details in the server are different from the backup data.
After restoring, please check the license available in the server.
WARNING: Your current license count is lower than your earlier license count.
If you restore the data now, devices that exceed the current licence count
will be moved to Suspended state.
License check completed.
Restoring certificate.
WARNING: Cannot evaluate the hostname, hence the certificate
may be from this host or another host.
[ Certificate not overwritten ]
Restored Certificate.
Restoring Common Services database.
Restored Common Services database.
Restoring CMIC data.
Restored CMIC data.
Restoring CMC data.
Restored CMC data.
Restoring Security Settings.
Restored Security Settings.
Restoring DCR data.
Restored DCR data.
Restoring Certificate key store.
Restored Certificate key store.
Restoring DCNM CrossLaunch data.
Restored DCNM CrossLaunch function.
Restoring JAAS configuration.
Restored JAAS configuration.
JRM Job Migration started.
JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
Cross Platform Migration for Campus started.
Cross Platform update Starts for Campus
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cwportal] has started.
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
doRestore of [cwportal] has completed.
doRestore of [ipm] has started.
10% of IPM Restore Completed
30% of IPM Restore Completed
50% of IPM Restore Completed
60% of IPM Restore Completed
70% of IPM Restore Completed
100% of IPM Restore Completed
doRestore of [ipm] has completed.
doRestore of [upm] has started.
HUM database restore starts
INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
INFO: Database Shutdown is in Progress..Please wait
INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
INFO: After Database Shutdown RC= 2304
root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
DBUTILS: Inside Cross Platform
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
HUM database restore successfully completed.
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
Directory is reportsStarted changing property .
linux
Restored HUM configuration file successfully.
doRestore of [upm] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
postRestore of [Common Services] has started.
postRestore of [Common Services] has completed.
postRestore of [Campus Manager] has started.
postRestore of [Campus Manager] has completed.
postRestore of [Resource Manager Essentials] has started.
postRestore of [Resource Manager Essentials] has completed.
postRestore of [Device Fault Manager] has started.
postRestore of [Device Fault Manager] has completed.
postRestore of [cwportal] has started.
postRestore of [cwportal] has completed.
postRestore of [ipm] has started.
postRestore of [ipm] has completed.
postRestore of [upm] has started.
postRestore of [upm] has completed.
postRestore of [cvw] has started.
postRestore of [cvw] has completed.
Restored successfully.
Are this errors going to affect our LMS 4.2 operations?
Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
Thank you for your help.
Regards,
Jelena -
WLC 2504 in Cisco Prime Infrastructure 1.2
Trying to add Cisco 2504 Wireless Controller, Software Version 7.3.101.0, to Cisco Prime Infrastructure
1.2 (1.2.0.103), License Evaluation, with no success.
When using Discovery, Discovery Job show Credential Errors: "Error occured due to invalid SNMP credential"
When Add Device from Device Work Center I get:
Reachability is "Unknown", Device Type is empty, Collection Status is "Managed with Warnings", with message "SNMP Failure: No Response for SNMP Get request.", Collection Time is empty.
I've tried with both snmp v2 and v3.
I've tried to lower "Maximum VarBinds per Get PDU" to 10 or 20, cause I've read similar problem in NCS.I solved the same problem 5min ago.!
select the device and press syc ..that helped me ... -
Cisco Prime Infrastructure 2.0 -- Third Party Devices
Hello,
we are using cisco prime infrastructure 2.0. Is it possible to manage third party devices? (We have a lot of Enterasys Switches)
When i want to Archive the config of the device there is an error --> No Device Package found for the specific device.
It is necessary to install device packages for third party devices? Where can i find and install these packages?
Thx in advanceit seems not to be on the road-map according to the functional /feature comparison between LMS and PI 2.0:
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
...and I doubt it will come (quickly) because config management has a lot of pitfalls and Cisco has a lot to do to get around all of them with their own devices..
However, Inventory Management for third party devices is on the road-map
older version of the document (feature comparison PI 1.2 - LMS 4.2) can be found here:
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/app_note_c27-716230.html -
Cisco Prime Infrastructure 2.2 - Network Topology error
He dears,
My Customer has installed over UCS Cisco Prime Infrastructure 2.2.
The network is composed with Switches nexus 93962-px and 2960x. All devices were discovered and inventoried successfully.
The problems is that Network Topology is not showing the connections between devices. Some devices connections are showed (partially) and another not.
We've already checked that CDP is run and working fine on all of switches.
I appreciate your help!
Tks,
RegisI'm sorry to say that but Prime Infrastructure does not support IP SLA functionality similar to Cisco Prime LMS:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
It's in the developer's plans but there's no schedule yet for this feature.
It's possible to manually configure IP SLA on the device and then define Custom SNMP templates in Prime Infrastructure and poll whatever information you might consider relevant.
This isn't user friendly (exact OID needs to be typed manually) and is a bit quite complicated, though.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. ** -
Cisco Prime Infrastructure, Express, licensing
Are there any funcionatility limitation between each edition of the Cisco Prime Infrastructure other than supported number of devices?
Does it support turning APs on and off on a predefined scheduled?
I read in the manual "Cisco Prime Infrastructure Classic View Configuration Guide for Wireless Devices" that it is possible to Managing WLAN Status Schedules. Does it require the assurance license feature set or will lifecycle license will be sufficient?I believe you could create a scheduled Lightweight AP Configuration Template job and have it simply turn off the radios on the selected APs. Make it recurring (every night at a certain time) and add a complementary recurring job to turn the radios back on at the desired time.
See the following screeenshot from PI 2.0 (click to enlarge): -
Cisco prime infrastructure 1.3 makes every 15 minutes cpu high on cisco 800 routers
I have an issue with cisco prime infrastructure 1.3 and cisco 880 routers, every 15 minutes the cpu goes to 100% on those routers, but I cannot find the job on the prime which is causing this, if I look in the job dashboard I have some jobs like sam_poller_22_15_getvpnpoller_27977292 that runs every 15 minutes (other jobs that I see CDBPoller_dmvpnPoller and CDBPoller_getvpnpoller) , probably is it on of these jobs, but how can I stop it (job type : poller job, owner =system) and what are they doing?
thanks for any assistanceThis is what i expected. I know many platform like 29xx/39xx or ISR's has known issues with Cisco Prime Infrastructure when it polls CISCO-LICENSE-MGMT-MIB, devices go high on CPU.
You have to block clmgmtLicenseInfoEntry by creating a view on your 800 router by configuring snmp view.
Following is the command/example:
Step 1: Configure SNMP View:
snmp-server view iso included
snmp-server view clmgmtLicenseInfoEntry excluded
Link community string to SNMP View:
snmp-server community view ro|rw
Example per your configuration:
snmp-server view PrimeInfra iso included
snmp-server view PrimeInfra clmgmtLicenseInfoEntry excluded
snmp-server community ArgSnmp view PrimeInfra RO ACLSNMP_RO
OR you can try following on your Cisco PI:
Manually update file below,
Open the /opt/CSCOlumos/conf/sam/template.xml, modify the template id=20 (licensePoller)
Update tag for value 600 to 86400 for all attrributes () of
template id =20
Old: 600
New: 86400
Some known bugs on such issues are :
CSCug97914 and CSCuc72024
Please check and let me know the updates.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. ** -
Web interface on Cisco Prime Infrastructure express not coming up
Trying to get Cisco Prime Infrastructure express installed. The installation completes without any error but when I try to run show NCS or attempt to start stop the service get the following output
usdayt-cis-002/admin# show application status NCS
% Application NCS is not installed
usdayt-cis-002/admin# ncs start
sh: /opt/CSCOlumos/bin/wcsadmin.sh: No such file or directory
here's the output from show inventory
usdayt-cis-002/admin# show inventory
NAME: "Cisco-VM chassis", DESCR: "Cisco-VM chassis"
PID: Cisco-VM-SPID , VID: V01 , SN: 1GP9SNNE5HJ
Total RAM Memory: 16304916 kB
CPU Core Count: 8
CPU 0: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 1: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 2: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 3: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 4: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 5: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 6: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 7: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
Hard Disk Count(*): 1
Disk 0: Device Name: /dev/sda
Disk 0: Capacity: 314.50 GB
Disk 0: Geometry: 255 heads 63 sectors/track 38244 cylinders
NIC Count: 1
NIC 0: Device Name: eth0
NIC 0: HW Address: 00:50:56:AF:76:34
NIC 0: Driver Descr: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
(*) Hard Disk Count may be Logical.
usdayt-cis-002/admin# show disks
disk: 1% used (184324 of 44628400)
temp. space 2% used (35792 of 1967952)
Internal filesystems:
all internal filesystems have sufficient free space
any idea what could be the issue here?OK, that's the correct one. Can you verify the checksum of the file? It should be:
91dc6ebc446c1c9c000c69af4be93102
If that's OK, I would delete the VM and try installing the ova once more.
Other than that, I'd suggest calling the TAC if it's a supported installation (i.e. not an evaluation copy). -
Cisco Prime Infrastructure 2.0 release date
What is the release date for Cisco Prime Infrastructure ? What are the improvement from 1.2 to 2.0 ?
thanks
MorganIt's currently due out 31 August 2013.
I haven't seen the final release notes but it will incorporate a lot of the features currently in LMS 4.2 for wired infrastructure management that are currently missing in PI 1.x.
I have heard it will not include Topology or template compliance reports and jobs at 2.0 - those features did not make the development cutoff date for 2.0 but they are projected for 2.1.
Maybe you are looking for
-
Hi This question is for people who know java not for those who think they know. OK here we go. Here is my file can you take a look and tell me why it is not showing the yahoo.com in browser window?? Thanks a lot import java.awt.*; import javax.swing.
-
I'm having an issue with some of my links in iweb. I have text boxes of the top of my pages and they are linked to other pages within the same site. I created everything in iweb. I have confirmed that all the settings are correct in the inspector pag
-
I have an older iMac, 24" from the late 2009 era, have upgraded to Yosemite, but now iPhoto won't open. It says that I need to go to the app store and install the new version. When I do that very thing, iPhoto says, "Installing" in the gray box tha
-
HR guru's, can anyone please tell me which Table and Extractor of HR module in R/3 give information about employee's available hours or availibility ?? thanks akash.
-
FVCUtil.sh java.util.NoSuchElementException
We are trying to run the FVCUtil.sh after adding new fields on the form and we see this error. Exception in thread "main" java.util.NoSuchElementException at java.util.StringTokenizer.nextToken(StringTokenizer.java:332) at com.thortech.xl.util.fvcuti