Cisco Prime Infrastructure 2.2 - Network Topology error

He dears,
My Customer has installed over UCS Cisco Prime Infrastructure 2.2.
The network is composed with Switches nexus 93962-px and 2960x. All devices were discovered and inventoried successfully.
The problems is that Network Topology is not showing the connections between devices. Some devices connections are showed (partially) and another not.
We've already checked that CDP is run and working fine on all of switches.
I appreciate your help!
Tks,
Regis

I'm sorry to say that but Prime Infrastructure does not support IP SLA functionality similar to Cisco Prime LMS:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
It's in the developer's plans but there's no schedule yet for this feature.
It's possible to manually configure IP SLA on the device and then define Custom SNMP templates in Prime Infrastructure and poll whatever information you might consider relevant.
This isn't user friendly (exact OID needs to be typed manually) and is a bit quite complicated, though.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

Similar Messages

Prime Infrastructure 2.2 - Network Topology View - Spanning Tree View

Hello Team,
Is it possible on PI 2.2 (latest version) under Maps/Network Topology View to be able to "monitor" the spanning-tree performance?
thanks in advance,
George

Sorry but that's not a currently offered feature.
It would be nice - the Netsys product that Cisco acquired 18-1/2 years ago (and subsequently abandoned) used to do this quite nicely.

Is cisco prime infrastructure 1.2 support topology auto-discovery ?

Is anyone konw it ?
Thanks!

PI (any version) does not yet have the Topology tool.
It didn't get done and won't be included until sometime after 2.0 is released in June.

Network topology map Cisco Prime Infrastructure

Hi just want to inquire if it is possible to create a network topology map on cisco prime infrastructure's dashboard that will display both wired and wireless devices or do we need another cisco product to accomplish it.
Thanks

At long last, Prime Infrastructure 2.2 was released yesterday (17 December 2014) and now includes the Topology map feature:
"Cisco Prime Infrastructure provides a visual map that allows you to view the physical network topology, including the network devices and the links that connect them. The topology maps have indicators that show the current alarm status of network devices and links. By using the network topology maps, you can easily monitor your network by viewing alarms and viewing the interconnection between the devices." (Link)
I'm migrating a system now and will open a new thread with first impressions.

CISCO PRIME INFRASTRUCTURE 1.2 NCS ERROR

Hi everyone,
can anyone put through on this, i'm having issue starting the ncs server on cisco prime infrastructure 1.2 .below is the message i get when i do show ncs status:
NGPHC-CPR001/admin# ncs status
Health Monitor is running, with an error.
failed to start NCS on startup Health Monitor
Reporting Server is running
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is stopped.
SAM Daemon is not running ...
DA Daemon is not running ...
Syslog Daemon is not running ...
status
thanks.

Hi Marvin,
Its has never worked. This is the first time i am installing it.
I haved done as you adviced but still getting the same error as stated above.
Please is there another way out.
thanks.

Cisco Prime Infrastructure 1.2 with Cisco Prime Network Control System Hardware Appliance

Hi Team,
I have following BOM
Cisco Prime Infrastructure
R-PI-1.2-K9
Cisco Prime Infrastructure 1.2
1
R-PI-1.1-500-K9
Prime Infrastructure 1.2 Software - 500 Device Base Lic
1
L-PILMS42-500
Prime Infrastructure LMS 4.2 - 500 Device Base Lic
1
L-PINCS12-500
Prime Infrastructure NCS 1.2 - 500 Device Base Lic
1
PRIME-NCS-APL-K9
Cisco Prime Network Control System Hardware Appliance
1
PI-APL-IMAGE-1.2
Cisco Prime Infrastructure 1.2 Appliance Software
1
Pls let me know if we have both NCS and LMS preinstalled with Cisco Prime Infrastructure 1.2 Appliance Software orwe need seperate appliance or server for LMS 4.2.
Regards

Hi Scott,
Thanks for the response but I got to know that LMS and NCS are combined in single ISO image from PI 1.2 and can be installed on the same physical NCS appliance.
Can you pls check this.
Regards

Cisco Prime Infrastructure 1.2 Error

Hi,
I don't have any experience with Cisco Prime infrastructure. I am getting the below error
Unable to start secondary NCS server PRLPrimeNCS02 [10.140.xx.xx]
Reason: IO Error: could not resolve the connect identifier "wcss1"
Not sure exactly what the error means. Any help much appreciated.
Thanks
Nachi

Hi Scott,
Thank you for your email.
The HA is runing on the Cisco Prime. Runing Cisco Prime on a Virtual machine in VM.
The issue we are experiencing is that the system failed over to the secondary (HA) for unknown reasons. When we failed it back it didn’t fail back properly. Configured Manual failover. Managed to failback to primary but it complained HA was no longer configured.
Tried to remove HA and reconfigure it. The primary removed the HA configuration, but the secondary kept it. Here is some info on the secondary
PRLPrimeNCS02/admin# ncs ha status
[Server] prlprimencs01(10.xx.xx.xxx) [State] Secondary Lost Primary [Failover Type] manual
PRLPrimeNCS02/admin# ncs ha remove
High availability configuration will be removed
Do you wish to continue? (y/N) y
Removing secondary configuration will remove all database information
Do you wish to remove high availability configuration from primary? (y/N) y
Secondary is attempting to remove high availability configuration from both primary and secondary
Requesting primary to remove high availability configuration from both primary and secondary
Successfully removed high availability configuration
PRLPrimeNCS02/admin#
PRLPrimeNCS02/admin#
PRLPrimeNCS02/admin# ncs ha status
[Server] prlprimencs01(10.xx.xx.xxx) [State] Secondary Lost Primary [Failover Type] manual
PRLPrimeNCS02/admin#
And the primary
prlprimencs01/admin# ncs ha status
[State] Stand Alone
prlprimencs01/admin#
Below is the log
Starting Health Monitor as a secondary
Checking for Port 8082 availability... OK
truststore used is /opt/CSCOlumos/conf/truststore
truststore used is /opt/CSCOlumos/conf/truststore
Starting Health Montior Web Server...
Health Monitor Web Server Started.
Starting Health Monitor Server...
Health Monitor Server Started.
java.lang.OutOfMemoryError: Java heap space
Dumping heap to logs/java_pid6044.hprof ...
Heap dump file created [249907589 bytes in 6.857 secs]
Thanks
Nachi

Cisco Prime network and cisco prime infrastructure

Hi,
What is the difference between Cisco Prime Network and Cisco Prime infrastructure.
Please advice.

I assume you are asking about Cisco Prime LAN Management System (LMS) vs. Cisco Prime Infrastructure (PI).
LMS is currently the leading Cisco offering for wired infrastructure management. It is the evolution of the earlier CiscoWorks LMS, CiscoWorks RWAN CiscoWorks 2000, CWSI, VLAN Director, original CiscoWorks classic etc. products going back almost 20 years.
PI is the equivalent Cisco offering for wireless LANs and is the successor to NCS and WCS products.
The overlap and confusion comes from the fact the Cisco is positioning PI as the overall wireless and wired management platform and gradually introducing wired network management features to make it equal (and eventually exceed) LMS's capabilities.
There is a comparison table here that shows the current differences. A major new release of PI (2.0) is due out shortly which will close many (but not all) of the gaps on that table.

Cisco Prime Infrastructure 2.2 Error

We have just loaded a new OVA for Cisco Prime Infrastructure 2.2 and are receiving an error on every pre-built and custom template of:
Template Deployment- Prepare and schedule : Configure SNMP
There was an error while parsing and rendering the content. (updateLeftTreeOnce is not defined)
Does anyone know how to fix?

I found local root user dosn't get this error, only tacacs with root rights get the error.

Cisco Prime Infrastructure 1.3 Web Log In Error

Hi,
I recently installed Cisco Prime Infrastructure 1.3 per the set up guide. I am able to log into the VM back end but when I try to log into the web interface with the admin account I get the following error message "Invalid Username or Password. Please try again". I verified that the username and password are correct but I still can not get in.

I think there is some bug (or feature) that makes that the accounts defined during setup are not valid in the web gui.
Since the users I created using CLI, work when I SSH into the PI 1.3, I know they are correct.
Clearly the web part uses a different way to authenticate users. I'm told all this worked just fine in PI 1.2, so not sure what cisco is up to.
To resolve this use the root account to login in the web interface.
It has the same pw as the admin user.
There you can create an admin account (and or others)
Cheers,
Michel

Getting past "Fetch VLAN configuration - Command failed" errors in Cisco Prime Infrastructure 2.0 - How?

I've got a handful of devices in Cisco Prime Infrastructure 2.0 which show up in the "Archive Failed Devices" view. The "Failure Reason" is some variation of "Fetch VLAN configuration - Command failed" sometimes including "TELNET: Failed to establish TELNET connection to x.x.x.x". What does this mean? How do I overcome this? In all cases, the device is configured to use SSH and has valid SSH credentials. In all cases, I can SSH from the command line of the NCS appliance to the devices listed in the "Archive Failed Devices" view.

Hi
I was able to fix the "Fetch VLAN configuration - Command failed" by allowing tftp from the device to PI server in firewall. See if this can help.

Cisco Prime Infrastructure 2.0 - no traps/info are pushed from devices

Good evening,
I have setup Cisco Prime Infrastructure 2.0 and, though I have added manually my 4 network cores as devices without any problem, I can't get a single trap or a single SNMP information to be pushed into my Cisco Prime Infra.
Here is my SNMP config on my core :
snmp-server user *edited* *edited* v3
snmp-server group *edited* v3 noauth notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F
snmp-server community *edited* RO
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps flowmon
snmp-server enable traps transceiver all
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps rf
snmp-server enable traps memory
snmp-server enable traps cpu_threshold
snmp-server enable traps eigrp
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps ospf retransmit
snmp-server enable traps ospf lsa
snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
snmp-server enable traps ospf cisco-specific state-change shamlink interface
snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
snmp-server enable traps ospf cisco-specific errors
snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps ospf cisco-specific lsa
snmp-server enable traps flex-links status
snmp-server enable traps fru-ctrl
snmp-server enable traps entity
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps ether-oam
snmp-server enable traps aaa_server
snmp-server enable traps flash insertion removal
snmp-server enable traps l2tc threshold sys-threshold
snmp-server enable traps power-ethernet police
snmp-server enable traps rep
snmp-server enable traps vswitch dual-active vsl
snmp-server enable traps udld link-fail-rpt status-change
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps auth-framework sec-violation
snmp-server enable traps dot1x auth-fail-vlan guest-vlan no-auth-fail-vlan no-guest-vlan
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail
snmp-server enable traps port-security
snmp-server enable traps ethernet evc status create delete
snmp-server enable traps energywise
snmp-server enable traps ipsla
snmp-server enable traps vstack
snmp-server enable traps bfd
snmp-server enable traps bgp
snmp-server enable traps bulkstat collection transfer
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps event-manager
snmp-server enable traps hsrp
snmp-server enable traps ipmulticast
snmp-server enable traps isis
snmp-server enable traps msdp
snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency
snmp-server enable traps syslog
snmp-server enable traps isakmp policy add
snmp-server enable traps isakmp policy delete
snmp-server enable traps isakmp tunnel start
snmp-server enable traps isakmp tunnel stop
snmp-server enable traps ipsec cryptomap add
snmp-server enable traps ipsec cryptomap delete
snmp-server enable traps ipsec cryptomap attach
snmp-server enable traps ipsec cryptomap detach
snmp-server enable traps ipsec tunnel start
snmp-server enable traps ipsec tunnel stop
snmp-server enable traps ipsec too-many-sas
snmp-server enable traps errdisable
snmp-server enable traps ethernet cfm alarm
snmp-server enable traps vlan-membership
snmp-server enable traps mac-notification change move threshold
snmp-server enable traps vrfmib vrf-up vrf-down vnet-trunk-up vnet-trunk-down
snmp-server host *ip-address-edited* version 3 noauth *edited*
Basically all traps are enabled but absolutely nothing is showing up in my Prime Infra except that my 4 devices are "Reachable".
Here is a show snmp on the same device :
sh snmp
Chassis: *S/N Edited*
38554534 SNMP packets input
    0 Bad SNMP version errors
    14 Unknown community name
    0 Illegal operation for community name supplied
    0 Encoding errors
    38453185 Number of requested variables
    0 Number of altered variables
    17790703 Get-request PDUs
    20583581 Get-next PDUs
    0 Set-request PDUs
    0 Input queue packet drops (Maximum queue size 1000)
38490708 SNMP packets output
    0 Too big errors (Maximum packet size 1500)
    0 No such name errors
    0 Bad values errors
    0 General errors
    38371069 Response PDUs
    13 Trap PDUs
SNMP global trap: enabled
SNMP agent enabled
SNMP logging: enabled
    Logging to *edited*, 0/10, 13 sent, 0 dropped.
Can anyone point out what is wrong or missing in my configuration? I can't seem to single it out myself.
Thanks
Jeremy

Hi Jeremy,
SNMP traps are shown in the events and alerts section of PI.
SNMP config looks fine. Can you run the SNMP debug (debug snmp packets ) .check the logs and see if the device is actually sending the TRAPS to the PI server.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Cisco Prime Infrastructure 1.2 and Aironet 1250 + VSS issues

Hi,
I am new to the NCS implementations and configurations. I have one very specific case with Cisco Prime Infrastructure 1.2 and autonomnous APs and several issues with Cisco VSS on 6500 switches.
So here is the version from Prime:
NCS/admin# show version
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.1.038
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2010 by Cisco Systems, Inc.
All rights reserved.
Hostname: NCS
Version information of installed applications
Cisco Prime Network Control System
Version : 1.2.1.012
IOS version on our APs (which are autonomnous) is:
AP-N-1>show ver
Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 11-Aug-11 03:23 by prod_rel_team
Well the issue what we have now is that access point has been added but its not recognized by the NCS prime. I have tried all three versions of SNMP but I get the same result. The SNMP configuration is valid since I use the same for my switching infrastructure. When I enter "debug snmp packets" and "terminal monitor" I can see the SNMP communication between Prime and Aironet 1250 which is standalone.
When I switch to Lifecycle theme and go to Operate > Device Monitor Center I see all devices I have added. The Aironet 1250 is reachable but under collection status I get Managed with Warnings. When I hover over with my mouse I get "None available".
I have successfully added my switching infrastructure in total, which is operating perfectly for Catalyst 2960/3650/3750/4500 series but for 6500 under VSS I have some warnings. The device is recognized by the system which is excellent and all is operational. I get the following errors under Collection Status:
feature_sensor
SNMP request timed out
feature_powerSupplyFanStatus-6k
SNMP request timed out
IdentityCapability
The device is unreachable.
feature_flashdevice
SNMP request timed out
sam_ipsla_feature
The device is unreachable.
What can be done to resolve these issues ? I have attached a screenshot of this particular issue. The affected access point is 172.16.165.241.
Predrag Petrovic

Hi rajeeshp,
Currently I am not allowed to upgrade it because of internal procedures involved in upgrading a specific piece of software (obtaining permissions from various departments). Is it free to upgrade from 1.2 to 1.3 or there is a specific charge for that.
Predrag Petrovic

Upgrade NCS 1.1.1.24 to Cisco Prime Infrastructure 1.2

Having a problem installing the ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz patch file on a virtual NCS before upgrading it to Cisco Prime Infrastructure 1.2.
I've followed the Cisco Prime Infrastructure 1.2 Quick Start Guide and did not had the same success as described in the document (see below):
gmsncs/admin# dir disk:defaultRepo/
Directory of disk:defaultRepo/
508376482 Sep 13 2012 05:38:25 backup-20120913-0530.tar.gpg
853768584 Sep 20 2012 05:40:17 backup-20120920-0530.tar.gpg
     127019 Sep 26 2012 16:40:58 ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
           Usage for disk: filesystem
                 1544204288 bytes total used
                27185573888 bytes free
                30293413888 bytes available
gmsncs/admin# patch install disk:defaultRepo/ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Local file not found
Anybody experience with this procedure.
Thank You
--- Update ---
Skipped Step 4 and followed Step 5 in the Quick Start Quide, however now I receive a diffrent error:
gmsncs/admin# dir disk:/defaultRepo
Directory of disk:/defaultRepo
926193986 Sep 26 2012 17:48:12 GRDbackup-120926-1736.tar.gpg
508376482 Sep 13 2012 05:38:25 backup-20120913-0530.tar.gpg
853768584 Sep 20 2012 05:40:17 backup-20120920-0530.tar.gpg
     127019 Sep 26 2012 16:40:58 ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
           Usage for disk: filesystem
                 2471309312 bytes total used
                26258468864 bytes free
                30293413888 bytes available
gmncs/admin# patch install GRDbackup-120926-1736.tar.gpg defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
gmsncs/admin#

Hi, Thank you again for your help, but I am still stuck. I have gathered the outputs from ncs start and a ncs status afterwards. Currently I am not able to access the web-UI of NCS..
deberncs01/admin# ncs startStarting Network Control System...This may take a few minutes...Dependency Check Failed: Matlab is not running.Dependency Check Failed: Ftp is not running.Dependency Check Failed: Tftp is not running.Failure during Network Control System startup. Check launchout.log for details.startdeberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin# ncs statHealth Monitor is running, with an error.failed to start NCS on startup Health MonitorReporting Server is StartingFtp Server is FailureDatabase server is stoppedTftp Server is runningMatlab Server is runningNMS Server is stopped.SAM Daemon is not running ...DA Daemon is not running ...Syslog Daemon is not running ...statusdeberncs01/admin#
Anyone got a clue on that? and where can I find that launchout.log on NCS? Thank you

Is cisco prime infrastructure support / can be run as syslog server?

Dear All,
is cisco prime infrastructure support / can be run as syslog server?
and,
where i can see network topology diagram, using cisco prime infrastructure?
many thanks,
Jerri

Hello. Cisco Prime LMS will be replaced by Cisco Prime Infrastructure in the near future.
In the current release of Cisco Prime Infrastructure you can't use topology diagrams. This feature is in roadmap.
About syslog, you can send syslogs to Cisco Prime Infrastructure, but I don't recommend using it as syslog server. Please see this link for more information https://supportforums.cisco.com/thread/2179520
Please rate if this helps

Cisco Prime Infrastructure 2.2 - Network Topology error

Similar Messages

Maybe you are looking for