Cisco Prime Infrastructure 2.2 UCS support (C24)

Hi,
I recently upgraded a CPI 2.1 server to 2.2 hoping that it would support monitoring and managing a customer's C24 server. Unfortunately I hadn't read the Supported Devices list (http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html) where it is stated that UCS C220 M3 and C240 M3 are supported, but none of the other models.
When can I expect support for C24 M3 (OID:1.3.6.1.4.1.9.1.1685) and the other UCS models?
Mikael

Cisco just added the Compute work center and UCS support in PI 2.2. I suspect they used the C220 as a first target since that's the platform for the upcoming hardware appliance refresh.
While they haven't announced future release plans, typically we see incremental device updates via the update packages - those have been coming out almost monthly with PI 2.1.
I'd encourage you to submit enhancement requests via your Cisco account team if the feature is important to you. Customer feedback is one of the key elements in deciding what features the developers focus on.

Similar Messages

  • Cisco Prime Infrastructure release 2.1 configuration archiving on CISCO WiSM2

    Hi all,
    Just wondering Cisco Prime Infrastructure  release 2-1 support configuration archiving on CISCO WiSM2?
    CISCO  release 2.0 mentioned that it doesn't support configuration archiving for WiSM2 but release 2.1 doesn't mention anything on it.
    Please assist.

    No, it is not supported even for PI 2.1

  • Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

    Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

    Prime Infrastructure/ Assurance is  positioned today more towards managing network elements and network performance,  rather than server infrastructure. We are in the process of adding Datacenter  component support, with more focus on Nexus and UCS- due later this  year.
    Having said that, Prime Infrastructure allows the system user to  add custom SNMP polling templates, which can then be used for polling any SNMP  based values from any SNMP enabled device. These can be used to collect the  information you specified below and the polled information will be available in  dashboards and reports.

  • Is Cisco Prime Infrastructure 1.2 or 2.0 compatible on UCS ?

    hello, can we install Cisco Prime Infrastructure 1.2 or 2.0 on UCS C22, C220M3 or NCS Hardware Appliance without using VMware ?
    thanks.

    Hi,
    Unfortunately, this isn't yet supported for Prime Infrastructure.
    you have Installed VMWare first.
    Thanks-
    Afroz
    [Do rate the useful post]

  • What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?

    What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?

    • PI provides visibility for autonomous  clients within the same list view as lightweight and wired clients (client list  page).
    • Rogue AP detection for autonomous AP's is not supported (it's  supported in CUWN). 
    • Alarms/events for client authentication issues (e.g.  authentication failure) are displayed in PI.
    • Config management for  autonomous AP's is via CLI template.  Config comparison and archiving  functionality in PI leverages these same features that were brought in from LMS,  so need to defer to others in terms of whether this is a cross-platform feature  in PI or is only supported on a subset of platforms.  Config comparison/archive  is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and  Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client  sessions, etc.) reports, and there are extensive reports for CUWN

  • UPS monitoring support with Cisco Prime Infrastructure 1.2

    Dear Members,
    Good day,
    I am having a project implemented wherein i have the UPS power redudancy solution for our network devices.
    Now can anyone gide that is it possible for below :-
    UPS units installed with SNMP cards be monitored via Cisco Prime Infrastructure 1.2 as our monitoring & management solution is Cisco Prime Infrastructure 1.2 ?
    if yes
    Can you guide if following action would be possible to export the below logs from UPS unit to our Cisco Prime Infrastructure 1.2
       a) UPS fault status information
       b) UPS operational status(input power available Y/N)
       c) Battery fault status
       d) Battery charging current
       e) Battery charge level
       f) Output current
    Conclusion is we need to confirm that would it be posible to achieve remote monitoring of these UPS units via our CPI 1.2
    Thanks in Advance for your support & replies to this query.
    Regards,
    Muzammil N.

    Prime Infrastructure 1.2 can manage non-Cisco devices in a limited fashion via SNMP query and trap processing. It cannot import logs and does not have a generic syslog server,
    So if your devices have snmp read only support and can generate SNMP traps for the above you can add them to PI. Follow the manual add device procedure here.

  • Cisco nexus 6001 not a supported device on cisco prime infrastructure 2.1?

    I have installed Cisco Prime Infrastructure 2.2 and Prime Infrastructure still doesn't seem to support the Nexus 6001 platform? Can someone tell me if Cisco Prime Infrastructure will ever support the Cisco Nexus 6001 platform or is there any plans to support it in any future device packs? 

    The Nexus 6001 isn't currently supported in PI 2.1. There's no workaround except to wait for a device or product update that adds support. Right now I know the 9000 series is on the 2.2 roadmap but I haven't seen any reference to the 6001 and PI.
    Interestingly, Prime LMS does support both the 6001 and 6004. Reference.

  • Cisco Prime Infrastructure 2.1 - WS-C2940-8TF-S and WS-C2940-8TT-S supported ?

    Hello community,
    I've got a question just to play safe.
    I'm running a Cisco Prime Infrastructure 2.1, we still do have a bunch of WS-C2940-8TF-S and WS-C2940-8TT-S with running images 12.1(22)EA12 , 12.1(22)EA13 and 12.1(22)EA14.
    I know these switch types already have a End-of-Sale and End-of-Life Announcement for the Cisco Catalyst 2940-8TT-S and 2940-8TF-S Compact Switches ("http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2940-series-switches/end_of_life_notice_c51-510224.html").
    The inventory collection status in the device work Center is for these switch types "Collection Failure", the error message is this one:
    An unexpected error has occurred:
    # Check the device is in supported device list in deployment guide -> not listed in "http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/release/notes/cpi_rn.html#pgfId-43885"
    # Check there is connectivity between the device and PI -> Checked adnd OK
    # Check the device credentials provided are valid -> Checked adnd OK
    # Finally if the problem still persists then contact Cisco System's technical assistance center -> not done yet, looks like these switch types are not supported any more in PI 2.1 ?
    Can anyone confirm this or answer back because these switch types are supported in her/his PI2.1 installation?
    Best regards
    Bastian

    Prime Infrastructure won't support those legacy models.

  • Is VSS supported in Cisco Prime Infrastructure 1.2?

    Is VSS supported in Cisco Prime Infrastructure 1.2?

    VSS support (converting standalone switches into a VSS)  was introduced with LMS 3.0.1 if I remember well and it is still there in LMS 4.2 (Cisco Prime Infrastructure):
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/user/guide/configuration/configvss.html
    Config Mgmt is supported, also.

  • Is cisco prime infrastructure support / can be run as syslog server?

    Dear All,
    is cisco prime infrastructure support / can be run as syslog server?
    and,
    where i can see network topology diagram, using cisco prime infrastructure?
    many thanks,
    Jerri

    Hello. Cisco Prime LMS will be replaced by Cisco Prime Infrastructure in the near future.
    In the current release of Cisco Prime Infrastructure you can't use topology diagrams. This feature is in roadmap.
    About syslog, you can send syslogs to Cisco Prime Infrastructure, but I don't recommend using it as syslog server. Please see this link for more information https://supportforums.cisco.com/thread/2179520
    Please rate if this helps

  • Do we support Cisco Prime Infrastructure in Windows Platform?

    Do we support Cisco Prime Infrastructure in Windows Platform?

    PI 1.2 needs to run on either a Cisco physical appliance or VMware ESX/ESXi 4.1 or 5.0. It's RHEL-based under the covers.
    Unlike LMS, you can't install it on a windows server, either physical or virtualized.
    For more details check:
    http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/quickstart/guide/cpi_qsg.html#wp46865

  • Cisco Prime Infrastructure 2.2 - Network Topology error

    He dears,
    My Customer has installed over UCS Cisco Prime Infrastructure 2.2.
    The network is composed with Switches nexus 93962-px and 2960x. All devices were discovered and inventoried successfully.
    The problems is that Network Topology is not showing the connections between devices. Some devices connections are showed (partially) and another not.
    We've already checked that CDP is run and working fine on all of switches.
    I appreciate your help!
    Tks,
    Regis

    I'm sorry to say that but Prime Infrastructure does not support IP SLA functionality similar to Cisco Prime LMS:
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
    It's in the developer's plans but there's no schedule yet for this feature.
    It's possible to manually configure IP SLA on the device and then define Custom SNMP templates in Prime Infrastructure and poll whatever information you might consider relevant.
    This isn't user friendly (exact OID needs to be typed manually) and is a bit quite complicated, though.
    -Thanks
    Vinod
    **Rating Encourages contributors, and its really free. **

  • Cisco prime infrastructure not detect IP address of clients

    hi all,
    I have Cisco Prime infrastructure 1.2 and when move to monitor >> clients tab it lists me all the clients in my network but their IP address list estates "not detected" ?
    please any advice?
    I appreciate your kindly support.

    Just an update that while this appears to have worked fairly well (as far as Cisco Management Planes go), there was one small 'gotcha' I've noticed so far:
    After the services came back up, the entries for our RADIUS servers did not function.  No, not because I didn't update the clients address record on the RADIUS server itself, but because the RADIUS server record(s) within CPI have a field called 'Local Interface IP' that still reflects the previous IP assigned to CPI.  A quick edit/save with the new interface fixes up the issue however.
    Cheers!

  • Cisco Prime Infrastructure 2.0 and Cisco ASA

    Hello,
    We've recently installed trial version of Cisco Prime Infrastructure 2.0 Express. We hoped that it already supports Cisco ASA 55xx series (especially 5505, we have pretty amount of them). But we had some problems with PI and asa durind the exploitation process.
    First, I've added ASA to PI, and Inventory Collection Status is Completed, but I can't see CPU and RAM utilization graphs. Inventory.logs are non-informative.
    Also, config backup is success, but when I try to watch the backuped configuration at Configuration Archive PI says "Failed to fetch raw configuration". And so on.
    ASA version is 5505, image is 9.1(2).
    So, I have a question: is it possible to manage ASAs with PI 2.0?
    UPD: I've just tried to upgrade asa to 9.1(4), and behavior of the equipment is quite the same. Seems we shall wait for 9.2 to be released.

    Have you downloaded and applied the latest Device Pack updates?
    PI enhanced ASA support after the initial 2.0 release and the Device Packs incorporate that change.
    The README file for Device Packs explains how to install them. (A bug currently does not allow the direct download in PI so you need to follow the method for installation from local storage after you manually download. Here is a link to the download location.

  • Cisco Prime Infrastructure 1.2 on Windows Server/Hyper-V

    Hi Everyone,
    In Entriprise environment while designing a BYOD solution we need to integrate ISE3315 with CPI 1.2. I know that Cisco ISE software either runs on 3315 platform or other option is virtual appliance (which is VMware based). Now problem is that we have Hyper-V environment as standard so I need to go with ISE-3315. Here my concern is to I install CPI 1.2 on Hyper-V, or on a Windows Server (2008 or 2012) based machine. Is that doable?
    Any help, suggessions would be warmly welcomed.
    Thanks,
    Azhar...

    Cisco Prime LMS will slowly be phased out in favor of Cisco Prime Infrastructure and hence there are no new mainline releases are planned to provide support to new Hardware or virtualization support.
    However, Prime LMS do support Hyper V Virtualization (As an installable in Windows 2008). Please note that Virtualization technologies like, VMWare and Hyper V virtualization systems are not supported in LMS 5000, and LMS 10000 Devices license, in Windows. VMWare Systems are supported in LMS 5000, and LMS 10000 Devices license in Soft Appliance. Virtualization technologies like, VMWare and Hyper V virtualization systems are not supported in LMS 5000, and LMS 10000 Devices license, in Windows. VMWare Systems are supported in LMS 5000, and LMS 10000 Devices license in Soft Appliance.
    For more details on HW and SW requirements for Cisco Prime LMS, please check document here.
    -Thanks
    Vinod

Maybe you are looking for