Cisco Prime Infrastructure Client Traffic

Hello,  I have some clients connected to non AVC supported access switches.  When I drill down on a client what do I need to configure on the switch for traffic statistics to show up?

hello,
I also have a problem concerning the interpretation of the report that I got. if anyone knows how Cisco gets its premium reports, it will help me!

Similar Messages

  • CISCO PRIME INFRASTRUCTURE NETFLOW TRAFFIC REPORT

    Hi,
    I have a report from cisco prime infrastructure, that I don´t know how to interpret,  because the fields in the report I don´t know what´s mean them,  the difference between them, what are optimal values, the worse values, etc.
    Can someone help me with this
    The name of the report is: FLEX NETFLOW TRAFFIC TQPQ
    The fields that I don´t know what are:

    hello,
    I also have a problem concerning the interpretation of the report that I got. if anyone knows how Cisco gets its premium reports, it will help me!

  • Cisco prime infrastructure not detect IP address of clients

    hi all,
    I have Cisco Prime infrastructure 1.2 and when move to monitor >> clients tab it lists me all the clients in my network but their IP address list estates "not detected" ?
    please any advice?
    I appreciate your kindly support.

    Just an update that while this appears to have worked fairly well (as far as Cisco Management Planes go), there was one small 'gotcha' I've noticed so far:
    After the services came back up, the entries for our RADIUS servers did not function.  No, not because I didn't update the clients address record on the RADIUS server itself, but because the RADIUS server record(s) within CPI have a field called 'Local Interface IP' that still reflects the previous IP assigned to CPI.  A quick edit/save with the new interface fixes up the issue however.
    Cheers!

  • Cisco Prime Infrastructure 2.2 clients and users IPs not detected

    Hi all,
    I have cisco PI2.2 and discovered all the network and i notified that there are some clients' IPs (Servers or PCs or Laptops or ....) not detected.
    please advice what may be the issue ? 

    Hi,
    does anyone happen to know if that problem is fixed? My currently setup looks like this:
    1. Cisco Prime Infrastructure 2.1 with updated device pack.
    2. Assurance license
    3. ASA5510 which has enabled netflow. Netflow is being sent to Cisco Prime 2.1
    I do receive netflow raw data within Cisco Prime 2.1 but any graphical display of netflow data is not working. Does anybody has an idea where the problem is? Could it be that the graphical data is only displayed when sending netflow 1, netflow 5 or netflow 7?
    regards
    Maurus

  • What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?

    What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?

    • PI provides visibility for autonomous  clients within the same list view as lightweight and wired clients (client list  page).
    • Rogue AP detection for autonomous AP's is not supported (it's  supported in CUWN). 
    • Alarms/events for client authentication issues (e.g.  authentication failure) are displayed in PI.
    • Config management for  autonomous AP's is via CLI template.  Config comparison and archiving  functionality in PI leverages these same features that were brought in from LMS,  so need to defer to others in terms of whether this is a cross-platform feature  in PI or is only supported on a subset of platforms.  Config comparison/archive  is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and  Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client  sessions, etc.) reports, and there are extensive reports for CUWN

  • User Name and Password for Cisco Prime Infrastructure 2.1

    Hi all:
    I am stuck at the login page of Cisco Prime Infrastructure 2.1.
    I have tried using the user name root and its password (when log in with root at Vsphere Client) and also the login user name "before" get into the appliance infrastructure, all cannot work.
    Anybody knows what is the default username or password or any way to set the username and password for this Cisco Prime Infrastructure 2.1 website?
    Thanks!
    tangsuan

    Hi Tangsuan,
    Following is the documented procedure for password recovery..
    In order to modify the GUI root user password, you will need to login to the NCS CLI
    as an admin user, and enter the command
    "ncs password root password <new password>" (without the quotes)
    This should set the web interface root user password :
    http://www.cisco.com/en/US/docs/wireless/ncs/1.1/configuration/guide/manag.html#wp1268889
    If you have lost your CLI password , try the default logging that is  ,
    CLI user is admin and not root, so please try logging in as admin with
    the password that was set during setup. If that does not work , you need
    the install disk that came with the appliance to recover that password.
    Follow these steps:
    Recovering a Lost Admin Password
    If you lose or forget the admin password for NCS appliance, follow these steps.
    Step 1 Reboot the NCS appliance with the ISO DVD inserted. The Cisco Prime Network Control
    System Welcome screen appears:
    ISOLINUX 3.11 2005-09-02  Copyright (C) 1994-2005 H. Peter Anvin
                 Welcome to Cisco Prime Network Control System
    To boot from hard disk, press <Enter>.
    Available boot options:
       [1] Network Control System Installation (Keyboard/Monitor)
       [2] Network Control System Installation (Serial Console)
       [3] Recover administrator password. (Keyboard/Monitor)
       [4] Recover administrator password. (Serial Console)
    <Enter> Boot existing OS from Hard Disk.
    Enter boot option and press <return>.
    boot:
    Step 2 Select the desired recovery option, 3 or 4, depending on how you
    are connected to the appliance and then follow the prompts.
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Cisco Prime Infrastructure 1.x Server requirements & Operating System

    Dear Friends
    I wish you are in very good health ........ I really very confused regarding LMS and i really needs your help ........ I need to order LMS for one of our customer with 500 devices and reporting cabailities ..... So i chosse base license "R-PI-1.1-K9" and 500 device license "R-PI-1.1-500-K9" and
    Compliance Management - 500 Device License "L-PI-1.1-CM-500"
    What really confused me that i tried to search server cabalitity for my requirments & Operating system and couldn't find it ...... what i need your help for is the following:
    1) What is the server requirments ???
    2) What is operating system (windows 2008 or VMWare VMware ESX/ESXi Version 4.1 or 5.0)
    3) Is their any deticated applicance from Cisco ??
    Please help
    Thanks in advance

    In addition to the release notes for the 4.2.3 patch noted above, please also see  the 4.2 release notes which further direct you:
    Server and Client Requirements
    For information on server and client requirements for the system and browser, see Chapter 2 of Installing and Migrating to Cisco Prime LAN Management Solution 4.2 at:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/install/guide/
    install.html
    To summarize the options it describes, you can run the LMS product on any number of platforms - a dedicated Cisco hardware appliance, a physical server of your own with Windows or Solaris OS, a VMware server with a Windows server OS guest, or a "soft appliance". The soft appliance is package built with the underlying guest OS (a customized RHEL distribution with Cisco's Application Development Environment OS (ADE-OS)) built-in.
    Once you have installed LMS 4.2, you should patch - first to 4.2.2 and then to the current 4,2,3. then run the software update feature to bring all package components up to date.
    Regarding licensing, there is a Cisco Prime Infrastructure Ordering and Licensing Guide here.
    When you order the licenses for PI 1.2 (new customer), you order the base product and then Lifecycle licenses (required for either PI 1.2 Lifecycle and LMS installations - which option is a customer choice) and, optionally, Compliance and Assurance licenses. An upgrade order for an existing LMS customer will include the base PI 1.2 with Lifecycle licenses as well as LMS in a single SKU as noted in tables 4 and 5 of the Ordering Guide.

  • Cisco Prime Infrastructure and no new events / alarms since update to 2.2.1

    Hello,
    I have upgraded our Cisco Prime Infrastructure from version 2.1 to 2.2.1 (with a backup and restore). We have round about 700 APs and three 5208 Controller. So far everything seems to work really fine. The only problem is that there are no new alarms/events under "Monitor", "Alarms and Events".
    The last entries (events and alarms) are dated before the upgrade. Other informations (like client counts for example) are correct.
    Is there a known bug related to my problem? Can anybody help?
    Thanks

    I have done some research:
    I see the following problems in the log-package (downloaded from Prime):
    ===
    <msg time='2015-04-07T12:10:50.620+02:00' org_id='oracle' comp_id='rdbms'
     client_id='' type='UNKNOWN' level='16'
     host_id='rzprime' host_addr='xxx.xxx.xxx.xxx' module='JDBC Thin Client'
     pid='9499'>
     <txt>ORA-1652: unable to extend temp segment by 128 in tablespace                 TS_EVENTS 
     </txt>
    </msg>
    <msg time='2015-04-07T12:10:50.727+02:00' org_id='oracle' comp_id='rdbms'
     client_id='' type='UNKNOWN' level='16'
     host_id='rzprime' host_addr='xxx.xxx.xxx.xxx' module='JDBC Thin Client'
     pid='15177'>
     <txt>ORA-1652: unable to extend temp segment by 128 in tablespace                 TS_EVENTS 
     </txt>
    </msg>
    ===
    I think that there is a problem with a too small tablespace. But I can´t fix that. Anybody? ;)

  • Cisco Prime Infrastructure 2.1 Not generating reports

    Dears,
    I am new to Cisco Prime. I installed Cisco Prime Infrastructure 2.1 for 60-days evaluation and i added routers, switches and APs. I configured SNMP community and telnet credentials. I can see clients on Dashboard, but when i go to reports and generate them for last hour, it displays "None Detected".
    Please advise.

    Programmatic access to PI's data is via the REST API.
    Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

  • Cisco Prime Infrastructure, trial version

    I am trying the Cisco Prime Infrastructure, trial version.
    In client management I can see only 802.3 clients, but not clients directly attached to the switch ports.
    Finding where a client, searched by IP or MAC address, is connected, is a mandatory need for us.
    I have enabled trap sending from the switches.
    Regards
    Donato Colombo

    - Please make sure that your switches are defined (added) in Prime, especially matching the
    correct SNMP READ community (as it was defined on the switch).
    M.

  • Software images Cisco Prime Infrastructure

    Hi,
    I have Cisco Prime infrastructure 2.0 and all it works ok except when i try to get software image from device. I don´t see any device, so i can´t select any device and I get "RSL error".
    When i try to access "Operate" > "Configuration Archives", i get the same error.
    The machine from where I navigate has last "flash player" version and it has all requeriments.
    Which can be the problem?
    Thanks.

    Hi!
    I have experience the same problem under different tools in PI. I did notice it first under “Deploy>Monitoring deployment>Interface Health template>deploy and I get the 2032 error.
    I have learn that this occurs when you use a client with no internet connection and you try to start above deployment tools.
    What happens is that when you try to open such page in PI web interface, the flash player starts and try to get some files on the PI but the URL it get from the PI application points to a library that do not contains the file (Bug in PI?). The files the flash player looks for is called something like framework_4.5.1.21328.swz and spark_4.5.1.21328.swz and so on. The url from PI looks like https://PI_Server/webacs/applications/SAMDeployTemplate/js/framework_4.5.1.21328.swz but the file is missing.
    The flash player have a backup way to get the xxxxxx.swz files it needs. If it can’t find the files in the application, it try to get it from Adobe http://fpdownload.adobe.com . But in my case my client can’t access internet so I get the error 2032.
    I have another installation at another site that allows internet access everything works fine. The flash player can load the files it needs and store them locally on the client PC. Then I can take that PC back to the another site with no internet access where I did get the 2032 error and now It works fine because the flash player have the files it needs to handle the PI application.
    I have a case open and it has not been solved yet.
    Mattias.S

  • Some question about Cisco Prime Infrastructure

    Dear all
    I have some question about using Cisco prime Infrastructure:
    - Can I show how many user access to one Access Point (AP) ?
    - If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
    - How many time do Cisco Prime Infrastructure refesh user  informantion .?
    Please help me and send picture about it if you can.
    Thank you so much.

    Hi,
    I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
    http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
    1- You can surely find how many clients associated to a specific AP.
    - Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
    3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
    HTH
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • Cisco Prime Infrastructure 1.2 is not working https & ncs

    Hi, I have just deploy Cisco Prime Infrastructure 1.2 in a virtual appliance (Vmware Esxi 5.1). Console is ok & setup is also completed. but there is no NCS application. only app is shwoing: NCSPNP
    Cannot access from https also.
    Please suggest how to Starting Prime Infrastructure Serve

    From what you describe, it sounds like you have installed the Plug and Play (PNP) ova image. You need to install the Prime Infrastructure image.
    See the screenshot below for details (click to enlarge):

  • When is Cisco Prime Infrastructure 2.0 released, and what does 2.0 offer?

                       We are running Prime Infrastructure 1.3 primarily for wireless management at this point.  We have enough licenses to add all our switches, routers, and firewalls, but we're hesitant to do so until 2.0 comes out.  While there are some features for backing up and configuring switches and routers, 1.3 still seems pretty limited in regards to non-wireless features.  For example, nearly every report in 1.3 is for wireless controllers or AP's, there are no reports I've found relevent for switches and routers.  I've read a lot of blogs, cisco posts, and white papers talking about how Cisco Prime Infrastrucure 2.0 will finally consolidate Prime into a truly all-in-one network management suite that can manage the entire Cisco environment.  Does anyone know when it's officially being released?  Does anyone have an tech sheets on what's new in 2.0, or what its capabilities are?  I want to better understand what 2.0 has to offer, when it's coming out, how to upgrade, so I can start planning for the upgrade and eventually importing all our network devices to Cisco Prime for centralized management.  Any useful information or links would be appreciated.
    Thanks,
    Christian

    PI 2.0 is in Beta mode for testing in closed group already. However it may still take some time to get released on CCO for FCS.
    I think it is expected to be released between aug-sep. BU has also started working on CPI 2.1, which you can see test uploads on CCO.
    For what does it have for customers?
    > As Cisco have a vision of one network Management software for both wired and wireless infrastructure, which started getting real partially with Cisco PI.
    As WCS got evolved to NCS and eventually to Cisco Prime Infrastructure, but it doesnt yet have full Management capability for wired infra., which is there with LMS.
    With CPI 2.x Cisco plans to blend entire LMS and WCS features together.
    -Thanks

  • Can't import images in cisco prime infrastructure 1.2

    - Any job , trying to import images, in my cisco prime infrastructure fails with :
    Jan 14 13:14:53 cisco-prime  01/14/13 13:15:18.040 ERROR [service] [pool-4-thread-19] IFM_SWIM_EXCEPTION: [com.cisco.ifm.swim.service.exception.IfmSwimParserException: Cannot populate software image info object from the image.]
                       How I can I solve this one ?
    Tx,
    M.

    I seem to have the same problem, strangely enough importing a universal image for 2960s worked fine, but I get thos error when trying to import a 3750x image

Maybe you are looking for