Cisco Prime Infrastructure - Is there a report of unused switch ports?

Hello,
Is there a report in Cisco Prime Infrastructure 1.4 showing the unused switch ports?
There used to be one in Cisco Prime LMS (Reclaim Unused Up/Down Ports Report).
Thank you,
Luke

Hello,
I now have Cisco Prime Infrastructure 2.0 running, and I don't see a report like the "Reclaim Unused Up/Down Ports" report that existed in LMS.
I found one called "Interface Capacity", but it only shows the number of ports that are "connected", "notconnect" or "disabled".
Does anyone know if a report of Unused ports exists in Prime Infrastructure 2.0 or if it will be available later on?
Thank you,
Luke

Similar Messages

  • Cisco Prime Infrastructure 2.1 Custom Reports

    Hi, I need to generate a custom Guest User report from Cisco Prime Infrastructure 2.1. It needs to have a couple more fields added to the existing "Guest User Association" report.
    Is it possible to connect to the Cisco Prime Infrastructure Database and Generate custom reports? Is there any documentation on this?
    Thanks

    Programmatic access to PI's data is via the REST API.
    Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

  • Cisco Prime Infrastructure 2.0 not showing alerts from switch

    Hello,
    I have a prime  infrastructure 2.0 running at a customer place and the customer now complains that he is not receiving link up/down messages from the switch. When i checked I have seen that if I shut down a port in the switch the prime identifies after a long time, but its not generating an alarm still. How can I fine tune the prime to fix this issue. Please help on this.
    Thanks in advance

    Hi,
    Same problem here.
    I am using Cisco Prime Infrastructure 2.0 (evaluation version for 60 days). I want to deploy port monitoring for my trunk ports between switches and some other important ports e.g. servers. Basically I want to get alarms when these ports are down, there are errors on ports and etc.
    So in Design>Port Grouping I created User Defined group with important ports. In Deploy>Monitoring Deployment I selected Interface Health (default)>Deploy selected Port Groups and when selected port group I created.
    Now the rule shows Deployed: Yes and Status: Active. After that I just pulled out one port which was in monitored group, waited 5min as it is set in Interface Health (default) template, and nothing happened, and worse, alarms started to show up of other ports where regular users are connected (computers was turned off), which I do not want to see at all. I tried redeploy template, I even created my own template but still no desired result.
    Any suggestions how to make port monitoring work?

  • Cisco Prime Infrastructure 2.2: Catalyst 2960X-24TS-LL Switch Collection Failure

    Hello,
    I've Upgraded Prime Infrastructure to Version 2.2.0.0.158. Now our Catalyst 2960X-24TS-LL switches show an error message, when they are added to the inventory. The error is as follows:
    Partial Collection Failure; Collection Status : Failed feature(s).
    The 2960X-24TS-LL is listed under the supported devices list and other switches (e.g. WS-C2960X-48FPS-L) got inventorized without any problems.
    Did anybody see this issue and can tell me how to solve it.
    - Benjamin

     - Getting that one too, since running 2.2 (Failed Features) ; suggest opening a TAC case.
    M.

  • Cisco Prime Infrastructure 1.3 - Assurance reporting

    We have Assurance license and we are exporting netflow and pretty much everything is working fine. Traffic is seen, recognized by protocol, DSCP, source/destination IPs, etc.
    Now, the question is, can dashlet present data that is less than one hour?
    For example, you select Serial interface on MPLS router and it will show you IP addresses that used most amount of bandwidth in last hour, but it would be much better if we could chose much less amount of time (like 5 minutes or lower), because in case of temporary congestion it won’t give exact information who is using most of the traffic. We would like to see who is currently consuming most of the bandwitdth.
    Or is there any other way to get info for interface level (or device) who’s using most and what type of traffic (something similar to show ip cache flow command on the router).

    Under the "Detailed Dashboards" pages, you can customise the Time Frame in there.  Default is past hour but you can specify smaller and/or more specific time periods as necessary... I've checked that this works ok in CPI 1.3 for both the "Interface" and the "End User Experience" tabs.
    Richard

  • Cisco Prime Infrastructure 1.3 - SNMPv3 can´t get CPU, memory info.

    Hi,
    I have a Cisco Prime Infrastructure 1.3 deployment with Catalyst 2960S switches. Switches are running IOS 15.0(2) SE2. All switches have SNMPv2 configured, and all appears to be fine. I'm migrating one switch to SNMPv3, and PI have reachability to the switch, but PI doesn´t receive traps from the switch, and neither poll CPU and memory information (all displays 0.00%).
    Somebody have a sample configuration of SNMPv3 with Cisco Prime (Infrastructure or LMS)? I cannot find a Cisco official (or unofficial) document related to this version, usually all mention SNMPv2.
    Thank you.
    Eduardo

    Hi Eduardo:
    SNMPv3 is indeed supported for general administration.  There's a bug with SWIM using SNMPv3 (CSCud92758), but you should be fine for just monitoring.  Have you deleted the switch, waited until Prime Infrastructure told you it was gone, then readded it as SNMPv3 natively?  Bug CSCug78869 keeps things from working well when changing SNMP versions. 
    If you don't have the new Update-1 patch for Prime Infrastructure 1.3.0.20 installed (filename PI_1.3.0.20_Update_1-12.tar.gz) installed, I'd suggest you get it.  While it's not going to specifically address this issue, there are a lot of really good fixes in it.
    Release Notes for Update 1 for Cisco Prime Infrastructure 1.3.0.20

  • Cisco Prime Infrastructure 2.1 Not generating reports

    Dears,
    I am new to Cisco Prime. I installed Cisco Prime Infrastructure 2.1 for 60-days evaluation and i added routers, switches and APs. I configured SNMP community and telnet credentials. I can see clients on Dashboard, but when i go to reports and generate them for last hour, it displays "None Detected".
    Please advise.

    Programmatic access to PI's data is via the REST API.
    Check the help menu on your PI server to see documentation regarding the supported tables and fields that can be queried via that method.

  • CISCO PRIME INFRASTRUCTURE NETFLOW TRAFFIC REPORT

    Hi,
    I have a report from cisco prime infrastructure, that I don´t know how to interpret,  because the fields in the report I don´t know what´s mean them,  the difference between them, what are optimal values, the worse values, etc.
    Can someone help me with this
    The name of the report is: FLEX NETFLOW TRAFFIC TQPQ
    The fields that I don´t know what are:

    hello,
    I also have a problem concerning the interpretation of the report that I got. if anyone knows how Cisco gets its premium reports, it will help me!

  • What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?

    What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?

    • PI provides visibility for autonomous  clients within the same list view as lightweight and wired clients (client list  page).
    • Rogue AP detection for autonomous AP's is not supported (it's  supported in CUWN). 
    • Alarms/events for client authentication issues (e.g.  authentication failure) are displayed in PI.
    • Config management for  autonomous AP's is via CLI template.  Config comparison and archiving  functionality in PI leverages these same features that were brought in from LMS,  so need to defer to others in terms of whether this is a cross-platform feature  in PI or is only supported on a subset of platforms.  Config comparison/archive  is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and  Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client  sessions, etc.) reports, and there are extensive reports for CUWN

  • When is Cisco Prime Infrastructure 2.0 released, and what does 2.0 offer?

                       We are running Prime Infrastructure 1.3 primarily for wireless management at this point.  We have enough licenses to add all our switches, routers, and firewalls, but we're hesitant to do so until 2.0 comes out.  While there are some features for backing up and configuring switches and routers, 1.3 still seems pretty limited in regards to non-wireless features.  For example, nearly every report in 1.3 is for wireless controllers or AP's, there are no reports I've found relevent for switches and routers.  I've read a lot of blogs, cisco posts, and white papers talking about how Cisco Prime Infrastrucure 2.0 will finally consolidate Prime into a truly all-in-one network management suite that can manage the entire Cisco environment.  Does anyone know when it's officially being released?  Does anyone have an tech sheets on what's new in 2.0, or what its capabilities are?  I want to better understand what 2.0 has to offer, when it's coming out, how to upgrade, so I can start planning for the upgrade and eventually importing all our network devices to Cisco Prime for centralized management.  Any useful information or links would be appreciated.
    Thanks,
    Christian

    PI 2.0 is in Beta mode for testing in closed group already. However it may still take some time to get released on CCO for FCS.
    I think it is expected to be released between aug-sep. BU has also started working on CPI 2.1, which you can see test uploads on CCO.
    For what does it have for customers?
    > As Cisco have a vision of one network Management software for both wired and wireless infrastructure, which started getting real partially with Cisco PI.
    As WCS got evolved to NCS and eventually to Cisco Prime Infrastructure, but it doesnt yet have full Management capability for wired infra., which is there with LMS.
    With CPI 2.x Cisco plans to blend entire LMS and WCS features together.
    -Thanks

  • CISCO PRIME INFRASTRUCTURE 1.2 NCS ERROR

    Hi everyone,
    can anyone put through on this, i'm having issue starting the ncs server on cisco prime infrastructure 1.2 .below is the message i get when i do show ncs status:
    NGPHC-CPR001/admin# ncs status
    Health Monitor is running, with an error.
    failed to start NCS on startup Health Monitor
    Reporting Server is running
    Ftp Server is running
    Database server is running
    Tftp Server is running
    Matlab Server is running
    NMS Server is stopped.
    SAM Daemon is not running ...
    DA Daemon is not running ...
    Syslog Daemon is not running ...
    status
    thanks.

    Hi Marvin,
    Its has never worked. This is the first time i am installing it.
    I haved done as you adviced but still getting the same error as stated above.
    Please is there another way out.
    thanks.

  • Cisco Prime Infrastructure 1.x Server requirements & Operating System

    Dear Friends
    I wish you are in very good health ........ I really very confused regarding LMS and i really needs your help ........ I need to order LMS for one of our customer with 500 devices and reporting cabailities ..... So i chosse base license "R-PI-1.1-K9" and 500 device license "R-PI-1.1-500-K9" and
    Compliance Management - 500 Device License "L-PI-1.1-CM-500"
    What really confused me that i tried to search server cabalitity for my requirments & Operating system and couldn't find it ...... what i need your help for is the following:
    1) What is the server requirments ???
    2) What is operating system (windows 2008 or VMWare VMware ESX/ESXi Version 4.1 or 5.0)
    3) Is their any deticated applicance from Cisco ??
    Please help
    Thanks in advance

    In addition to the release notes for the 4.2.3 patch noted above, please also see  the 4.2 release notes which further direct you:
    Server and Client Requirements
    For information on server and client requirements for the system and browser, see Chapter 2 of Installing and Migrating to Cisco Prime LAN Management Solution 4.2 at:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/install/guide/
    install.html
    To summarize the options it describes, you can run the LMS product on any number of platforms - a dedicated Cisco hardware appliance, a physical server of your own with Windows or Solaris OS, a VMware server with a Windows server OS guest, or a "soft appliance". The soft appliance is package built with the underlying guest OS (a customized RHEL distribution with Cisco's Application Development Environment OS (ADE-OS)) built-in.
    Once you have installed LMS 4.2, you should patch - first to 4.2.2 and then to the current 4,2,3. then run the software update feature to bring all package components up to date.
    Regarding licensing, there is a Cisco Prime Infrastructure Ordering and Licensing Guide here.
    When you order the licenses for PI 1.2 (new customer), you order the base product and then Lifecycle licenses (required for either PI 1.2 Lifecycle and LMS installations - which option is a customer choice) and, optionally, Compliance and Assurance licenses. An upgrade order for an existing LMS customer will include the base PI 1.2 with Lifecycle licenses as well as LMS in a single SKU as noted in tables 4 and 5 of the Ordering Guide.

  • Consultations on Cisco Prime Infrastructure 2.2

    I recently installed Cisco Prime Infrastructure 2.2 and I have 2 questions regarding configuration:
    1. What configurations should run for vulnerability when some event occurs on a switch an alarm is lifted in the Cisco Prime Infrastructure 2.2?
    2. Is there any way to put a device into maintenance mode in the web interface of Cisco Prime Infrastructure 2.2, so that can not be spoiled reports regarding equipment availability during the execution of maintenance?

    1. If you configure PI as an SNMP and syslog server for your devices and have enabled logging traps etc., PI's alarm browser will show the alarms. If you want them to be sent to you via email, you can do that under the Admin menu for setting up your Mail server and clicking the link to "Configure email notification for individual alarm categories." (see below - open in new tab to zoom). It's not completely customizable but what you see there is the current product capabilities in that regard.
    2. No, this is not currently an available feature in PI 2.2.

  • After Update Cisco Prime Infrastructure from 1.3 to 2.0 imported floor plans has black background

    Hello everybody,
    we have updated cisco prime infrastructure from 1.3 to 2.0. When we now import a floor plan (autocad-file, dwg-format), the background from finally image, that is show in prime, is black. Previous imported floor planes has a white background. We also tried to import a previous imported floor plan again, the background is now black. Is there a possibilty to change the background to white? Thanks

    Hi,
    Look no further, these issues are related to know bugs. It seems that autocad files have multiple issues with PI 2.0, Only feasible way is to convert them to JPGs and import them. Lets hope these will get fixed to the level they where at PI 1.3.
    CSCuj63017, PI 2.0 dwg(AutoCAD file) import reports Tailormade is for Demo use only
    Symptom:
    When dwg files are imported to Prime Infrastructure, they report
    "For Demonstration Purposes only
    Tailor made software"
    Conditions:
    Prime Infrastructure - 2.0.0.0.294
    Use of dwg (Auto cad) files
    Workaround:
    None at this time
    Further Problem Description:
    CSCuj94500, Loading DWG floor maps on PI 2.0 appears in black background
    Symptom:
    On PI 2.0 when we try to import autoCAD .dwg file to map, the map appears in black background.
    Conditions:
    On PI 2.0 when we try to import autoCAD .dwg file to map
    Workaround:
    use 3rd party tool like Draftsight or AutoCAD Trueview to change the file to .jpg and import again to PI, after that the map appear in white background in PI 2.0.
    Further Problem Description:
    However, the same .dwg file when we imported it to PI 1.3 appear in map with white background.

  • Cisco Prime Infrastructure 1.2 is not working https & ncs

    Hi, I have just deploy Cisco Prime Infrastructure 1.2 in a virtual appliance (Vmware Esxi 5.1). Console is ok & setup is also completed. but there is no NCS application. only app is shwoing: NCSPNP
    Cannot access from https also.
    Please suggest how to Starting Prime Infrastructure Serve

    From what you describe, it sounds like you have installed the Plug and Play (PNP) ova image. You need to install the Prime Infrastructure image.
    See the screenshot below for details (click to enlarge):

Maybe you are looking for

  • Project Server 2010 TimesheetInvalidApprover

    Hello, everyone Some of my timesheet approvers have noticed that when they try to approve a timesheet, an error occurs. I checked  the queued jobs to find this General Timesheet: TimesheetInvalidApprover (3205). Details: id='3205' name='TimesheetInva

  • WMA files into itunes

    I read that unprotected wma files can easily be copied into itunes, but I have tried importing wma files both by importing and dragging and dropping, and I can't get it to work. These are wma files I recorded myself at a lecture, so I don't think the

  • Generate XSL as a CLOB without file system

    I use XDK for PL/SQL in Oracle 8i. I need a way to generate an XSL without any acces to a file system whatsoever. So this example here below wouldn't work becouse it needs a path to a file in a file system. ss := xslprocessor.newStylesheet(xsldoc, di

  • ECC-- SAP PI-- Successfactor Integration: Invalid SFAPI session

    Hello Experts,    I am working on  EmployeeData Synchronization interface the content of which is predelivered from SAP. I configured the interface and while testing as first step I was able to retrieve the session ID from Successfactor, but using th

  • Insert HTML and export to PDF problem (ID CS6)

    Greetings, A new feature in Indesign CS6 is to insert HTML snippets in an Indesign document via the Object > Insert HTML option. This will insert a frame in the page containing the rendered HTML content. There are several issues that I have encounter