Cisco Prime Infrastruture 1.2 - Supported languages
Hello,
What languages are supported by the product? I mean the web interface.
I can not find the information.
French for example?
Tks in advance
Bye
Davd
There are no official requirements with regard to the language settings on the client side - only the browser version is a prerequisite.
I assume if you ask Cisco, they would say only english and japanese versions are tested. But this does not mean very much because it will not affect the stability of the application if you try and use other language versions on the client side. Most of the customers I know are using a german browser version to access LMS. And if you would have any issues it would be easy to change the language settings and see if this is the reason. Just try and see if it works.
Similar Messages
-
Cisco Prime Infrastructure 2.2 Supported Language
Hi Team,
We have deployed PI 2.2 into one of the client where they want Cisco PI in French Language, so all coming alarm, events, setting, etc will be display in French.
It's would be much appreciate if someone from PI expert will guide us how we can achieve this?
Thanks,
VishalVishal, please close this thread/Mark this as answered to close, in case there are no more follow up questions.
-Thanks
Vinod
**Encourage Contributors. RATE Them** -
Cisco Prime LMS 4.1 - Support for Cisco Catalyst 3560-C Series Switches
Hello together
I have a customer which uses the following switch. Last year I have installed LMS 4.1 for him to manage the switches. Unfortunatly the switch model is not supported. According to the information found on the following site the switch is supported for most of the modules in LMS:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html
The oid object of the device is the following: 1.3.6.1.4.1.9.1.1465
Supported Software: 12.2(55)EX (Customer has 12.2(55)EX3
Version Support Type: Device Update
So I updated all device updates I was able to find.
Step 1: For that I went to Admin > System > Software Center > Schedule Device Downloads and created a job where I have downloaded the latest versions of all packages.
Step 2: Installed the downloaded packages Admin > System > Software Center > Device Update and installed all the packages.
Unfortunatly I don't see the same result like described in the Supported Device Table for LMS 4.1.
- Cisco View -> works
- Inventory and Config Collection -> works
- Fault Monitor not working -> Error Code Unsupported
- Network Topology Layer 2 Services -> Device Type ciscoProducts.1465, Symbol Question Mark
- VLAN Management -> Doesn't work
- User Tracking > seems also not to work
When I open the report for supported devcies (Reports > System > Device Support) and search for C3560C... I find the following devices, but not mine which i need:
C3560C-8PC-S .1.3.6.1.4.1.9.1.1466
C3560CG8PC .1.3.6.1.4.1.9.1.1317
C3560CCG8TC .1.3.6.1.4.1.9.1.1318
wsC3560CPD8ptS .1.3.6.1.4.1.9.1.1368
Does anybody have experience with the same switch type / model? Am I doing something wrong or is this type of switch not implemented correctly till now? Further the docuemntation supported devices would be wrong.
Thanks for any feedback ErichThanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
I've asked him to verify his answer for me.
Is your answer based on real world expereince (the best there is)? That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
Thanks for mentioning options 1-3 but I do not wish to employ any of them. I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
Ian. -
Is cisco prime infrastructure 1.2 support topology auto-discovery ?
Is anyone konw it ?
Thanks!PI (any version) does not yet have the Topology tool.
It didn't get done and won't be included until sometime after 2.0 is released in June. -
Cisco nexus 6001 not a supported device on cisco prime infrastructure 2.1?
I have installed Cisco Prime Infrastructure 2.2 and Prime Infrastructure still doesn't seem to support the Nexus 6001 platform? Can someone tell me if Cisco Prime Infrastructure will ever support the Cisco Nexus 6001 platform or is there any plans to support it in any future device packs?
The Nexus 6001 isn't currently supported in PI 2.1. There's no workaround except to wait for a device or product update that adds support. Right now I know the 9000 series is on the 2.2 roadmap but I haven't seen any reference to the 6001 and PI.
Interestingly, Prime LMS does support both the 6001 and 6004. Reference. -
Collecting logs from Cisco Prime Infrastructure
Hi ,
I am currently working in integrating Cisco Prime Infrastruture with the siem tool Qradar.
Can any one help me out in below issues:
1)How and where is the log stored in Cisco Prime.?
2)Does the logs contains the logs of the devices that Cisco Prime manages?
3)Is there any way to sent out the logs from Cisco Prime to a third party device.?Hi,
1)How and where is the log stored in Cisco Prime.?
/opt/CSCOlumnos/logs
2)Does the logs contains the logs of the devices that Cisco Prime manages?
AFAIK,
In the prime infrastructure Syslogs are directly read from udp port 514 and then filtered
, the non SEV1 and SEV2 syslogs will be dropped and will not be entered into db . The
syslog messages will not be saved into log files .
Till now PI support only SEV 0,1 and 2 syslog.
3)Is there any way to sent out the logs from Cisco Prime to a third party device.?
unfortunately , this feature is not there in PI so far.
Thanks-
Afroz
***Ratings Encourages Contributors **** -
Hello!!
We have multiple controllers Cisco WLC 5508 (all running software version 7.6.120.0) distributed in various buildings and a controller in other control building (also Cisco WLC 7.6.120.0 5508) operating as Master and backup of the buildings's controllers .
Each building is radiated such an SSID that is used as a validation of the user connected to that SSID web portal each controller (in the WLAN, Security -> Layer 3 -> Web Policy), using the local database to validate the user.
The problem is that the local database of users is not being replicated between controllers buildings and the Master controller, so if you drop the controller of a building, the Master controller begins to provide service to the buildings access points, but the equivalent radiated SSID cannot able to validate users.
I need know if it's possible through Cisco Prime Infrastruture 2.1, first replicate in the Master controller on the basis of existing controllers buildings each local data and, second, that the creation of new users are automatically perform both the controllers like to the Master .
Thanks.As noted earlier, it is not advisable to use the root user to log in for normal use. New users and groups can be created by navigating to Administration > Users, Roles & AAA as shown in the preceding figures. It would help to chalk out what are the various levels at which you want to distribute the users, and to create those roles first. It doesn’t really matter whether you create users or groups first. New users can be easily added by going to Administration > Users, Roles & AAA > Users > Add Users > Select “Add Users” from the drop-down on the right side. Once you get into the add user workflow, fill in the username, password, and local authorization for this user as shown in the figure below.
A virtual domain can also be assigned to the users when you define their roles by selecting the virtual domain on the left side and moving it to the right side as shown in the image below (left). -
Monitoring ASA in Cisco Prime infrastructure 2.2
Hi everybody. I have some issue with cisco Prime Infrastructure 2.2. We use this product in our network for monitoring network devices and I need to monitor also our ASA 5550 device with soft 8.4. I added ASA to Cisco PI but see only basic component like my device can reachable via and read via snmp. But cannot see CPU, RAM, Device ENV like Temperature, l2l vpn connection, Interfaces status and Utilization that interfaces, cannot see sub interface that placed on ASA like that g0/0.20. I need fully monitor ASA and See logs and trap for my device:
CPU RAM ENV (Temperature), Interface and sub interface status, L2L VPN Status.
1 Cisco Prime infrastructure can full support ASA for monitoring and logging.. IF YES how can i configure that features in Cisco PI 2.2 for ASA
2 IF not which product Can full support that features for full monitoring and logging ASA devices
I have a little deadline for finishing
thanks everybody beforeI've not success monitoring ASA interface utilization either. I'm using PI 2.2 with device update #1. The ASA is a 5585-X with 9.2(3) software.
I have deployed the PI monitoring template to the ASA and do see its overall status and PI has enumerated the interfaces in the device page.
I even looked at a packet capture and see PI querying the values of the interface counters and those values being sent back to PI - yet I cannot select any ASA interface when drilling down under Performance Detail monitoring.
When I get some free time I will open a TAC case on it, meanwhile I am getting all the info I need from the upstream and downstream switches. -
Upgrade Cisco Prime LMS 4.0 to Cisco Prime Infrastructure 2.1
My company has asked me to migrate Prime LMS 4.0 to Prime Infrastructure 2.0 for a client and can not find the guide, the questions are? the migration is possible without an intermediate step? and There is a guide to update LMS 4.0 to PI 2.0 ??
Thanks in advance.Prime LMS 4.2.2 added support for the PI template directly:
Export Data for Prime Infrastructure
Cisco Prime LAN Management Solution supports data migration to Prime Infrastructure 1.2. This feature enables user to export the Device Credentials Repository (DCR) data from LMS 4.2.x versions to Prime Infrastructure 1.2. The data backup status and backup location are displayed at the bottom of the Export Data for Prime Infrastructure page. The data being exported from LMS and the data imported back to PI are listed as follows.
Data exported from LMS
•Device Credentials Repository (DCR)
•Software Image Management
•Config Archive
•Change Audit
•Syslog
Data Imported to PI
Device Credentials Repository -
hi,
whether the cisco prime 2.1 will support cat-os devices??
the model device is ws-6506-e
Rgds
TDNo.
CatOS was discontinued 7 years ago. Your 6506 needs to be running IOS 12.2 or higher to be recognized and supported by PI 2.2.
Device Type
SYSOIDS
S/W Version
Software
Cisco Catalyst 6506 Switch
OID:1.3.6.1.4.1.9.1.282
OID:1.3.6.1.4.1.9.5.45
>=12.2
IOS -
Can we Monitor third party Windows servers through Cisco Prime
Hi Team,
We are using Cisco Prime assurance and are currently monitoring Cisco UCCE Components through it.
Meanwhile we have few third party windows servers , which we would like to monitor it through Cisco Prime , just to maintain a single monitoring tool.
If yes, please share the steps or link.Also highlight the limitations in that.
Regards,
krishnaSeems Cisco Prime Assurance Manager is now obsolete and end of life already.
It is replaced by Cisco Prime Infrastructure. CPI supports third party/vendor devices to some minimum extent with limited management details collected via SNMP Templates.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
Cisco Prime Infrastructure, Express, licensing
Are there any funcionatility limitation between each edition of the Cisco Prime Infrastructure other than supported number of devices?
Does it support turning APs on and off on a predefined scheduled?
I read in the manual "Cisco Prime Infrastructure Classic View Configuration Guide for Wireless Devices" that it is possible to Managing WLAN Status Schedules. Does it require the assurance license feature set or will lifecycle license will be sufficient?I believe you could create a scheduled Lightweight AP Configuration Template job and have it simply turn off the radios on the selected APs. Make it recurring (every night at a certain time) and add a complementary recurring job to turn the radios back on at the desired time.
See the following screeenshot from PI 2.0 (click to enlarge): -
Cisco prime infraestructure 2.X
Hi,
Two questions..
it's posible management, inventory,etc.. switch 2960x/6509 vs-2T-10g, with cisco prime infraestructure 2.x?
it's posible report with compliance licence switch 2960x?
ThanksCisco Prime Infrastructure 2.0 Supported Devices
http://www.cisco.com/en/US/partner/products/ps12239/products_device_support_tables_list.html
For 2960s - See rows 465 to 488
For 6500s - See rows 266 to 281
There are limited compliance reports available in 2.x Prime Infrastructure for wireless and wired devices- Please see::::
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/user/guide/reps.html#wp1059921 -
Cisco Prime Soft Appliance not saving changes to syslog.conf
Greetings,
I'm having an issue with the syslog.conf file on a Cisco Prime LMS 4.2.4 soft appliance with a Solaris base. My workplace uses local4 as the logging facility for its network devices, and according to a discussion I found on this site, I need to add the line:
local4.info /var/log/syslog_info
I have attempted this several times; we're approaching at least 5 attempts today. I have attached text files created from putty logs where I've attempted to make the necessary change. I appreciate any assistance the community can provide.
Regards,
RobHi, Afroz,
I really appreciate your assistance, but I'm afraid my hopes have been dashed. The syslog.conf reverted to its original configuration. I will go through my steps to be sure that I understood your suggestion properly.
I edited the syslog.conf to put all messages from local4 in /opt/CSCOpx/conf/syslog-entries.txt. Then, I exited the shell to the console, issued the 'write mem' command, and closed the session. Upon my reconnection, I found that my changes to the syslog.conf were not saved.
Did I make the correct edits in the correct places? Another question, is this bug present in the versions of Prime LMS running Linux and/or Windows, or does it only exist in the soft appliance running Solaris?
Regards,
Rob
Edit:
I'm reading the "Installation and Migration of Cisco Prime" PDF, and it gives me the impression that Cisco Prime is only supported as Windows, Solaris, and soft appliance installations. Is that correct? If it is correct, then installation of Cisco Prime LMS is not supported on other Linux distros such as Ubuntu Server, CentOS, Fedora, etc.?
My thanks. -
What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?
What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?
• PI provides visibility for autonomous clients within the same list view as lightweight and wired clients (client list page).
• Rogue AP detection for autonomous AP's is not supported (it's supported in CUWN).
• Alarms/events for client authentication issues (e.g. authentication failure) are displayed in PI.
• Config management for autonomous AP's is via CLI template. Config comparison and archiving functionality in PI leverages these same features that were brought in from LMS, so need to defer to others in terms of whether this is a cross-platform feature in PI or is only supported on a subset of platforms. Config comparison/archive is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client sessions, etc.) reports, and there are extensive reports for CUWN
Maybe you are looking for
-
Back in March my PC crashed while updating my Iphone 3Gs. Both froze and were rendered unusable. The Iphone had to be restored to factory settings in order to be used. The PC required more work and was delayed by warranty issues. In the meantime
-
Error message when running the FSPCCURR - PS/Fin MultiCurrency Process
error message when running the FSPCCURR - PS/Fin MultiCurrency Process ===================================================== 2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun. 2011-03-21-17.21.
-
Please help. Just bought 30GB iPod and thought it was charging, however it now simply flashes from a color apple icon in the middle of the screen, to a black and white one, then to a blank screen while making a quick sound like it is powering down. A
-
TS3297 I don't remember the security questions I set...!
I don't remember the answers to the security questions I set for my apple store account. I ned to know who to restore them or change them because I can't buy nothing from my iPad
-
HT1338 where can i download OS X 10.7
hay guys where can i download OS X 10.7 snow leopard bcoz i want to update to Mountain Lion pls advice me