Cisco Prime Soft Appliance not saving changes to syslog.conf

Greetings,
I'm having an issue with the syslog.conf file on a Cisco Prime LMS 4.2.4 soft appliance with a Solaris base. My workplace uses local4 as the logging facility for its network devices, and according to a discussion I found on this site, I need to add the line:
local4.info /var/log/syslog_info
I have attempted this several times; we're approaching at least 5 attempts today. I have attached text files created from putty logs where I've attempted to make the necessary change. I appreciate any assistance the community can provide.
Regards,
Rob

Hi, Afroz,
I really appreciate your assistance, but I'm afraid my hopes have been dashed. The syslog.conf reverted to its original configuration. I will go through my steps to be sure that I understood your suggestion properly.
I edited the syslog.conf to put all messages from local4 in /opt/CSCOpx/conf/syslog-entries.txt. Then, I exited the shell to the console, issued the 'write mem' command, and closed the session. Upon my reconnection, I found that my changes to the syslog.conf were not saved.
Did I make the correct edits in the correct places? Another question, is this bug present in the versions of Prime LMS running Linux and/or Windows, or does it only exist in the soft appliance running Solaris?
Regards,
Rob
Edit:
I'm reading the "Installation and Migration of Cisco Prime" PDF, and it gives me the impression that Cisco Prime is only supported as Windows, Solaris, and soft appliance installations. Is that correct? If it is correct, then installation of Cisco Prime LMS is not supported on other Linux distros such as Ubuntu Server, CentOS, Fedora, etc.?
My thanks.

Similar Messages

IDVD 06 not saving changes?

Greetings. I teach an adult ed class in iLife. Unfortunately, the lab has old single 533 G4s. When we use iDVD 06, the program is not saving changes made in the different drop zones, etc. We place elements in drops zones, tell the program to save, quit and relaunch...nothing saved.
This problem was repeated by a student on his G5 at home.
Any ideas?
Thanks.
Michael Colin
Mac G4 Single 533 Mac OS X (10.4.4) Problem on G4 and G5

Hw much free space is left on the macs?
Plenty. These are very small projects we're working on.
Thanks for the response.
Michael
Mac G4 Dual 533 Mac OS X (10.3.9)

Stocks App not saving changes

My stocks app is not saving changes no matter what changes I make. After making a change, I'll exit the app, re-enter and it defaults back to a whole bunch of stuff I didn't add.
Can someone help me with this, I'm not sure where to even start!

Nadia Bielawa wrote:
This did not help at all. I'm not about to restore my iPhone and set everything up again, there must be a simpler solution.
Th simple solution is restart.
If that fails, thenreset.
If that fails, then restore from backup.
If that fails, then restore as new.
If that fails then make an appointment at the genius bar.

Cisco Prime NCS appliance & license

Hi all,
I'm looking for getting a Cisco prime NCS appliance (PRIME-NCS-APL-K9). I'm a little bit confused regarding to the license scheme:
1. Does the appliance has any license coming with it or we need to order the license separately?
2. If I have an WLC 5508 (license support 12 APs) & 12 3500 APs, then number of devices counted will be 1 (WLC) or 12 (APs) or 13 (WLC + APs) ?
Thanks for the help,

Cisco Prime Infrastructure for the first time you may access the lifecycle and assurance features using the built-in evaluation license that is available by default. The default evaluation license is valid for 60 days for 100 devices and 150 interfaces. You will need to purchase the base license and the corresponding feature license before the evaluation license expires. Cisco Prime Infrastructure 1.2 can be ordered using the standard Cisco® ordering tools at http://www.cisco.com/go/ordering. More information about getting the license files can be found in the Cisco Prime Infrastructure 1.2 Ordering and Licensing Guide

Is cisco prime infrastructure support / can be run as syslog server?

Dear All,
is cisco prime infrastructure support / can be run as syslog server?
and,
where i can see network topology diagram, using cisco prime infrastructure?
many thanks,
Jerri

Hello. Cisco Prime LMS will be replaced by Cisco Prime Infrastructure in the near future.
In the current release of Cisco Prime Infrastructure you can't use topology diagrams. This feature is in roadmap.
About syslog, you can send syslogs to Cisco Prime Infrastructure, but I don't recommend using it as syslog server. Please see this link for more information https://supportforums.cisco.com/thread/2179520
Please rate if this helps

Cisco Prime LMS appliance Compatibilty with Cisco Prime NCS

Hi,
Is it possible if we can install Cisco Prime LMS 4.2 in the appliance which is inbuilt with Cisco Prime NCS .
We have PILMS42-1.5K-U license available with us.
Rgds,
Kamal

One can install either LMS 4.2 or NCS on the a physical (software on PRIME-NCS-APL-K9 hardware) or virtual appliance (software installed on customer-provided VM).
The two products (NCS and LMS) cannot coexist on a given appliance instance. This is due to change in the future as LMS and NCS merge under the Cisco Prime Infrastructure 2.0 release but for now they are distinct and separate products with a common approach and similar look and feel but requiring separate servers, whether physical or virtual.
Please refer to the ordering and licensing guide here.

Aironet 1242ag - not saving changes

dear friends...
i am struggling with this devices now from some time.. not sure where is the mistake ...when i am trying to configure wireless device (AP) from web using exprerss setup or nornal manual mode .. it is not saving any changes.. means clicking on apply button does not do anything .. infact its not getting clicked... please see the screen shot attaced ..my express setup menu is different then the one mentioned in this link
http://happyrouter.com/how-to-configure-a-cisco-wireless-access-point-ap-from-scratch
any still if you make any changes and refresh the page it comes back to 10.0.0.1 ip which is shown on the screen shot...
guys any help will be really appreciated ...
or if someone can also share the commands to configure the same... but before commands i want to sort out my above issues...

Hi,
The simpleset configuration would be something like as below.
dot11 ssid TEST
vlan 1
authentication open
interface Dot11Radio1
encryption vlan 1 mode wep mandatory
interface Dot11Radio1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0
encryption vlan 1 mode wep mandatory
interface Dot11Radio0
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
encapsulation dot1Q 1 native
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip add x.x.x.x y.y.y.y (where x.x.x.x is the ip address whichyou want to assign and y.y.y.y is the subnet mask)
ip default-gateway x.x.x.x (where x.x.x.x is default gateway which you want to use)
Hope that helps
Regards
Najaf
Please rate when applicable or helpful !!!

Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI. In the enhancement, I take the data records and make some changes to some quantities and units of measure. After making these changes, I let the function module continue on as normal. The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
Here's an example: An EDI order comes in with 6 EAs of a material. In my enhancement, I change it from 6 EAs to 2 3PK. I then let it go on its way. The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs.
The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open.
Can anyone give me any clues on how to make my changes stick to the IDoc?
Thanks,
Curtis

Ok, I figured out why it's not saving. Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy. So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB. I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT). The problem is that I can't change them because the IDoc is still open.
Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
Thanks,
Curtis

NOT SAVING CHANGES OR EDIT'S!!PLEASE HELP

hey guys,
i had this problem before along with many others, with the earlier vers of iphoto. until apple gave us the fix...now agin with 5.0.4.any changes or edits(redeye fix) are not saved to any of my pics!!
is anybody else having this problem??
is there a fix or update??
please help......thanks.

Hi sunny,
Check the permissions on the Library and Pictures folder. If they are set for you, make sure the library is not locked.
Get info on the iPhoto Library folder
screenshot of how the "get info" window should look for your user
If edits are not saved it could be the image files are locked, especially if these files came from another computer or sent to you in email. Do a "get info" on these files and unlock them.

ABAP - BDC transaction not saving changes to records

I am trying to write my first ABAP code using BDC recording. Essentially I would like to flag the "Final Delivery" field (EKPO-EGLKZ) for a range of documents by recording transaction MASS.
The code runs without errors - but the changes are not saved. I have run the code in "Processing Mode: A" (Display all screens) and the program successfully loops through each record & saves the updated fields. When I look at the documents in ME23N the changes have not been saved.   Running the MASS transaction manually results in the changes being successfully saved so I can rule out any data validation issues.
Does anyone know why the changes refuse to save when running the code below?
I have considered trying to use BAPI_PO_CHANGE instead of BDC, but I am new to ABAP and I thought the BDC code would be less complex.
report Z_MASS_REMOVE_FDI_DCI
       no standard page heading line-size 255.
include bdcrecx1.
TYPES: BEGIN OF ty_tab,
MASSOBJTYP(7),
MASSVARNAM(7),
DOCNO(9),
ITEM(1),
END OF ty_tab.
DATA : it_tab TYPE STANDARD TABLE OF ty_tab.
DATA : wa_tab TYPE ty_tab.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'X:\STO.TXT'
* FILETYPE = 'ASC
has_field_separator = 'X'
TABLES
data_tab = it_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
END-OF-SELECTION.
LOOP AT it_tab INTO wa_tab.
WRITE:/ wa_tab-MASSOBJTYP,
wa_tab-MASSVARNAM,
wa_tab-DOCNO,
wa_tab-ITEM.
PERFORM open_group.
perform bdc_dynpro      using 'SAPMMSDL' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSSCREEN-OBJECT'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MASSSCREEN-OBJECT'
                              wa_tab-MASSOBJTYP.
perform bdc_field       using 'MASSSCREEN-VARNAME'
                              wa_tab-MASSVARNAM.
perform bdc_dynpro      using 'SAPMMSDL' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSSCREEN-OBJECT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=NEXT'.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(01)'.
perform bdc_field       using 'MASSFREESEL-LOW(01)'
                              wa_tab-DOCNO.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(02)'.
perform bdc_field       using 'MASSFREESEL-LOW(02)'
                              wa_tab-ITEM.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CRET'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(01)'.
perform bdc_dynpro      using 'SAPLMASSINTERFACE' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FDAE'.
perform bdc_field       using 'BDC_CURSOR'
                              'NR_ITEMS'.
perform bdc_dynpro      using 'SAPLMASSINTERFACE' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'BDC_CURSOR'
                              'NR_ITEMS'.
perform bdc_dynpro      using 'SAPLMASSMSGLIST' '0300'.
perform bdc_field       using 'BDC_CURSOR'
                              'REOML-MSGTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=EXIT'.
perform bdc_transaction using 'MASS'.
ENDLOOP.
PERFORM close_group.

Where is BDC_INSERT.
If u use OPEN and CLOSE_group u need to use INSERT_GROUP also to update in database.
A session will be created and u nedd to run the Session in Sm35 in order to update the database.
Edited by: Ranjith Kumar on Sep 18, 2008 6:41 AM

Web Interface of Cisco Prime 2.1 not working

Excuse me!
I install the trial version cisco prime 2.1 (OVA) on ESXi server
I can ping cisco prime but web interface of cisco prime not worinking
prime/admin# ncs status
Health Monitor Server is running.
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is running.
Plug and Play Gateway is running.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...

Services running fine..
check it with other Browser , Supported browser are below::
–   Google Chrome 31 or later.
–   Microsoft Internet Explorer 8.0 or 9.0 with Google Chrome Frame plugin (users logging in to the simplified Lobby Ambassador interface do not need the plugin).
–   Mozilla Firefox ESR 24.
–   Mozilla Firefox 24, 25 or 26.
If above does not help , reboot the server once and check the issue again.
Thanks-
Afroz
***Ratings Encourages Contributors ****

Mail not saving changes in Mailbox Behaviors

For one of my accounts since the upgrade to Mavericks when I enter the Mailbox Behaviors section, I found that Drafts, Junk and the one under Trash named Store Deleted messages on the server is checked.
I uncheck them because I doon't want them checked. I Save the changes I made then go back to that account and the same ones I just unchecked are now checked again. Its not saving what I just unchecked.
What the heck is wrong?
Also noticed that in OSX 10.8 I could drag all my email accounts to a different order than the way they are now listed. Can't do that now.

Thanks for discovering this issue being connected to drafts. I have trouble with this for a couple of months as well.
Since you assume it to be connected to "drafts", I suggest to deselect "Store draft messages on the server" for your IMAP-Account. I just did this for myself, to see if it helps, and can't give you results yet. Maybe you just wanna try simultaneously. I guess, the reason for our problem could me some messy communication between Mail and the server, where one party get's confused.
Greetings
Paul

Crystal Reports 8.5 not saving changes to report criteria

When I use the formula editor to add new criteria to the report criteria formula, the changes are not saved when the report is closed. It doesn't seem to matter how I exit the formula editor, and I've even tried "save as" and saving the report to a new name prior to closing. When I reopen the report, the changes are gone.
Sometimes the changes don't even last that long - they often disappear while doing a refresh.
Are there and known bugs that I haven't found - or better yet, any solutions?

Hi Roberta.
I've had this happen a few times as well. Usually though a message will come up at some point in time saying. If the report is locked when you open it, either because someone else has the same file opened in Crystal or if you open the report from an e-mail attachement, a message will come up saying something in the lines of the report cannot be saved and it must be saved to a new file.
When you do the Save As, where are you saving it to? Try creating a new folder and saving it to that folder. You should have full permissions to the new folder and I'm hoping it will save. I just want to eliminate any problems with permissions. After you save the file, check the properties of the file. Did the file's date and time update or does it still have the original date?
When you open the report in Crystal, go to File on the menu bar and make sure Save Data with Report is not checked. Make your changes and rerun the report and save it again. See if that helps.
These are the two common problems I've had when this happens to me.
Hope this helps,
Brian

Web interface on Cisco Prime Infrastructure express not coming up

Trying to get Cisco Prime Infrastructure express installed. The installation completes without any error but when I try to run show NCS or attempt to start stop the service get the following output
usdayt-cis-002/admin# show application status NCS
% Application NCS is not installed
usdayt-cis-002/admin# ncs start
sh: /opt/CSCOlumos/bin/wcsadmin.sh: No such file or directory
here's the output from show inventory
usdayt-cis-002/admin# show inventory
NAME: "Cisco-VM chassis", DESCR: "Cisco-VM chassis"
PID: Cisco-VM-SPID , VID: V01 , SN: 1GP9SNNE5HJ
Total RAM Memory: 16304916 kB
CPU Core Count: 8
CPU 0: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 1: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 2: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 3: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 4: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 5: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 6: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
CPU 7: Model Info: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
Hard Disk Count(*): 1
Disk 0: Device Name: /dev/sda
Disk 0: Capacity: 314.50 GB
Disk 0: Geometry: 255 heads 63 sectors/track 38244 cylinders
NIC Count: 1
NIC 0: Device Name: eth0
NIC 0: HW Address: 00:50:56:AF:76:34
NIC 0: Driver Descr: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
(*) Hard Disk Count may be Logical.
usdayt-cis-002/admin# show disks
disk: 1% used (184324 of 44628400)
temp. space 2% used (35792 of 1967952)
Internal filesystems:
all internal filesystems have sufficient free space
any idea what could be the issue here?

OK, that's the correct one. Can you verify the checksum of the file? It should be:
91dc6ebc446c1c9c000c69af4be93102
If that's OK, I would delete the VM and try installing the ova once more.
Other than that, I'd suggest calling the TAC if it's a supported installation (i.e. not an evaluation copy).

Cisco Prime Collaboration Deployment - Not able to mount NFS

Hi everybody,
We are trying to add an ESXi server to the PCD, but we are unable to succeed due to an error while mounting the NFS unit.
We get the following message:
"Failed to mount Cisco Prime Collaboration Deployments export as NFS store to the ESXi Host"
In the PCD we obtain the followings logs I attach the file.
We are using a VMware vSphere Enterprise Edition
The ESXi, has the VMkernel port map to a different subnet that the management subnet.
VMkernel: 10.11.202.75
VMmanagement: 10.11.200.75
To Add the ESXi host we are attacking the 10.11.200.75. Someone knows if the VMkernel must be in the same subnet for the NFS to mount?
2014-11-07 14:17:26,711 WARN [pool-1-thread-18] validation.ESXiValidation.isDSinESXiHost - Datastore PCD_NFS is NOT connected to ESXi Host 10.11.200.75
2014-11-07 14:17:57,585 ERROR [pool-1-thread-18] custom.PreESXiHostCreate.call - failed to mount ucmap nfs
Thanks in advance.

Hi everybody,
Finally it turns it was a problem with the ASA. We apply a predefined rule in the ASA to allow NFS. We discover that the rule was not correctly defined, after creating a specific rule everything work just fine.

Cisco Prime Soft Appliance not saving changes to syslog.conf

Similar Messages

Maybe you are looking for