Cisco Prime Specific NTP Servers by Compliance Management

Gets,
I have the following NTP servers configured on different switches
ntp server 192.168.1.1
ntp server 10.10.10.10 key 1
ntp server 12.12.12.12
ntp server 13.13.13.13 key 1
ntp server 14.14.14.14 key 30
The correct NTP servers are only 10.10.10.10 and 192.168.1.1. The problem is that as you see, the IP addresses of the NTP servers are very generic, meaning that in my large network, I may find any other NTP server.
Can you develop a code to run by Compliance Management to exclude any unneeded NTP servers ? It is required that the code catches any IP address and any key that is not matching the first two servers.

Similar Messages

Cisco Prime Inf 1.2 configuration compliance tool

Hi - working with a trial version of Cisco Prime 1.2. I am looking for a Configuration Compliance tool. I used it in Cisco Works LMS - but I dont see a way to do the same thing with Cisco Prime.
Please advise.
Thanks

PI 1.2 definitely does not include all the regulatory compliance features of LMS. Reference.
Even though the document says PI 1.2 will do baseline compliance, I haven't figured out how they expect you to do that.

CISCO PRIME INFRASTUCTURE 1.2_instalacion de Compliance y Assurance en un mismo Appliance.

Gente,
Alguno pudo instalar en el mismo Appicance los módulos de Prime Infrastructure 1.2 Compliance y Assurance??? Hay una guia de instalacion?
Gracias,
Marcelo.

Spanish
Aquí hay un enlace a la Guía de Instalación Primer Gerente de Aseguramiento
http://www.cisco.com/en/US/products/ps12349/tsd_products_support_install_and_upgrade.html
Google es todo lo que tienes que hacer ...
English
Here's a link to Prime Assurance Manager Installation Guide
http://www.cisco.com/en/US/products/ps12349/tsd_products_support_install_and_upgrade.html
Google it is all you've gotta do...

WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade

Hello,
Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
I want to check is the upgrade procedure that we have planned is ok or we have missed something.
Phase 1: WCS to CPI 1.3 upgrade
1. Check that WCS is at 7.0.230.0 version
2. Export WCS database
3. Install NCS 1.1.1.24 software
4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
5. Migrate WCS license and import it in NCS software
6. Migrate WCS data to NCS software using ncs migrate command
7. Patch NCS software
8. Inline upgrade to CPI 1.3 software
9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
Phase 2: LMS 3.2 to CPI upgrade
1. Export LMS 3.2 database
2. Install LMS 4.2 software
3. Install license to LMS 4.2
4. Restore data from LMS 3.2 to LMS 4.2
5. Direct upgrade from LMS 4.2 to 4.2.2
6. Export the device list with credentials from LMS 4.2.2 and import it as a Bulk Import in CPI 1.3
At the end we will have CPI 1.3 and LMS 4.2.2 software running.
Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
Regards,
Jelena

Hello Marvin,
We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
resolver.pl           restoreDBTableMig.pl restoreJRMMig.pl      restorebackup.pl
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
Restore started at : 2013/12/05 14:11:58
Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
     USER ID is ..................................... : sysadmin
     OS of the backup archive is..................... : Windows
INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
You are attempting to perform a Cross Platform Restore..
Do you wish to continue (Y/N) [Y] :Y
     Generation to be restored is ................... : 0
     Backup taken from............................... : /opt/BKP/
     Common Services version in the backup data is... : 3.3.1
     Common Services is installed in................. : /opt/CSCOpx
     The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
     Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
     Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
     WARNING: The list of applications installed on this CiscoWorks server does not match the list of
              applications in the backup archive. If you restore data from this backup archive,it may
              cause problems in the CiscoWorks applications.
              Do you want to continue the restore operation? (y-continue or n-quit, y/n)?Y
     Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
     Available disk space in NMSROOT................. : 86451488 Kb
     Required disk space in NMSROOT.................. : 35906524 Kb
     (The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cwportal] has started.
preRestore of [cwportal] has completed.
preRestore of [ipm] has started.
preRestore of [ipm] has completed.
preRestore of [upm] has started.
preRestore of [upm] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
doRestore of [Common Services] has started.
          Cross Platform Update started.
          Cross Platform Update completed.
          License check started.
             WARNING: The license details in the server are different from the backup data.
                      After restoring, please check the license available in the server.
             WARNING: Your current license count is lower than your earlier license count.
                      If you restore the data now, devices that exceed the current licence count
                      will be moved to Suspended state.
          License check completed.
          Restoring certificate.
             WARNING: Cannot evaluate the hostname, hence the certificate
                      may be from this host or another host.
                      [ Certificate not overwritten ]
          Restored Certificate.
          Restoring Common Services database.
          Restored Common Services database.
          Restoring CMIC data.
          Restored CMIC data.
          Restoring CMC data.
          Restored CMC data.
          Restoring Security Settings.
          Restored Security Settings.
          Restoring DCR data.
          Restored DCR data.
          Restoring Certificate key store.
          Restored Certificate key store.
Restoring DCNM CrossLaunch data.
          Restored DCNM CrossLaunch function.
          Restoring JAAS configuration.
          Restored JAAS configuration.
          JRM Job Migration started.
          JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
          Cross Platform Migration for Campus started.
Cross Platform update Starts for Campus
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cwportal] has started.
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
doRestore of [cwportal] has completed.
doRestore of [ipm] has started.
        10% of IPM Restore Completed
        30% of IPM Restore Completed
        50% of IPM Restore Completed
        60% of IPM Restore Completed
        70% of IPM Restore Completed
        100% of IPM Restore Completed
doRestore of [ipm] has completed.
doRestore of [upm] has started.
HUM database restore starts
INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
INFO: Database Shutdown is in Progress..Please wait
INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
INFO: After Database Shutdown RC= 2304
root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
DBUTILS: Inside Cross Platform
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
HUM database restore successfully completed.
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
Directory is reportsStarted changing property .
linux
Restored HUM configuration file successfully.
doRestore of [upm] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
postRestore of [Common Services] has started.
postRestore of [Common Services] has completed.
postRestore of [Campus Manager] has started.
postRestore of [Campus Manager] has completed.
postRestore of [Resource Manager Essentials] has started.
postRestore of [Resource Manager Essentials] has completed.
postRestore of [Device Fault Manager] has started.
postRestore of [Device Fault Manager] has completed.
postRestore of [cwportal] has started.
postRestore of [cwportal] has completed.
postRestore of [ipm] has started.
postRestore of [ipm] has completed.
postRestore of [upm] has started.
postRestore of [upm] has completed.
postRestore of [cvw] has started.
postRestore of [cvw] has completed.
Restored successfully.
Are this errors going to affect our LMS 4.2 operations?
Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
Thank you for your help.
Regards,
Jelena

Cisco Prime - non Cisco devices

Hi
We have started using Cisco Prime for our network management. On our sites we have a few devices managed by other vendors which are non cisco devices, we would like to keep these in the diagrams on cisco prime but since we don't manage them we don't want them to use up our licenses.
Is there a way to retain the device info maybe as a note or something on the side of the diagram without the device using up a seat in the license?

Which Prime? LMS or Infrastructure? ..or one of the others.
LMS for example doesn't ever display a non-Cisco device in the Topology view. It does limited management of non-Cisco devices and they do not consume device licenses.

Does Cisco Prime have a replacement product for NCM or Network Compliance Manager?

Does the Cisco Prime application development team have a product that replaces the NCM or Network Compliance Manager?

Both Prime and LMS can do baseline compliance, after a fashion. LMS's is much more mature in my estimation. Prime is more around the lines of deploying templates.
The regulatory compliance functions as of now are in only LMS's Compliance and Audit Manager (CAAM) function. It's quite useful, matching the baseline compliance features.
An LMS license is included with PI, but it does need to be on its own server (or separate VM).

Cisco Works Network Compliance Manage NCM

I'm working on the Cisco Works Network Compliance Manager.
I would like to add a device which is behind a firewall.
For this I use the option bastion host to authen. on the firewall and
to get access to the device self.
The problem is the firewall is not listing to the port 22/23, it a different port number
like example 1234.
Is it possible to change the port manually in a configfile, as the webinterface has no option for this ?
I use the version 1.7.1 the latest one.

Both Prime and LMS can do baseline compliance, after a fashion. LMS's is much more mature in my estimation. Prime is more around the lines of deploying templates.
The regulatory compliance functions as of now are in only LMS's Compliance and Audit Manager (CAAM) function. It's quite useful, matching the baseline compliance features.
An LMS license is included with PI, but it does need to be on its own server (or separate VM).

Can we Monitor third party Windows servers through Cisco Prime

Hi Team,
We are using Cisco Prime assurance and are currently monitoring Cisco UCCE Components through it.
Meanwhile we have few third party windows servers , which we would like to monitor it through Cisco Prime , just to maintain a single monitoring tool.
If yes, please share the steps or link.Also highlight the limitations in that.
Regards,
krishna

Seems Cisco Prime Assurance Manager is now obsolete and end of life already.
It is replaced by Cisco Prime Infrastructure. CPI supports third party/vendor devices to some minimum extent with limited management details collected via SNMP Templates.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Cisco Prime LAN Management Solution - List of manageble devices

Is there a list of devices that is current list of devices that Cisco Prime is able to manage (ie: configuration files, images, health and status, etc)?
I more specifically need to know if Prime manages IPS-4200 series, As one of my requirments is to back up configuration, images, signature files and ideally from one repository as the rest of the Cisco router/switching devices.
thanks in advace!
-OZ

Hi Oscar,
Here is the list of devices information supported by Prime. Select the version of PI you are running & see
http://www.cisco.com/en/US/products/ps12239/products_device_support_tables_list.html
If that answer your query pls mark this thread as answered.
HTH
Rasika
**** Pls rate all useful responses ****

Cisco Prime LMS 4.1, "License Server/Daemon Manager is down."

Hello,
We having problem with Cisco Prime LMS running version 4.1.
When open Home page shows the next message: "License Server/Daemon Manager is down. Please check license.log for more information." (see attached)
The daemon server is stopped already and i can't restart it, see below:
C:\>net start crmdmgtd
The Cisco Prime Daemon Manager service is starting.
The Cisco Prime Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Thanks

It looks like you're seeing CSCte49301. Follow the release note steps to solve this:
Symptom:
The EssentialsDM daemon hangs in a Waiting to initialize state (as seen in the output of the pdshow command). Additionally, one might see "Error connecting to JRM" in Resource Manager Essentials applications.
Conditions:
This occurs on Windows servers after the patch for KB968930 is installed, and only if the Windows Remote Management service was started prior to starting CiscoWorks Daemon Manager.
Workaround:
Shutdown CiscoWorks Daemon Manager with the following command from the server's command prompt:
net stop crmdmgtd
Delete the following two files:
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry.backup
Restart CiscoWorks Daemon Manager with the following command:
net start crmdmgtd
If that does not work, then the Windows Remote Management service must be stopped, and disabled. Then, CiscoWorks Daemon Manager must be restarted.

Cisco Prime Performance Manager 1.6: Install Units silently ? ./setup.sh -f silent_input_file.txt

Friends
This one should be routed to Cisco prime performance manager 1.6 forums
I am seeking a sample silent input format for silently installing Cisco PPM 1.6 Units by executing ./setup.sh -f <silent_input_file.txt>
Any help in this regards is greatly appreciated.
Thanks in advance
Dharmesh Shah
###### Excerpts from setup.sh ########
# Install a fresh copy of unit
InstallUnit () {
if [ "$INSTALLFILE" != "" ] ; then
./setupSvr.sh -f $INSTALLFILE -i unit
else
./setupSvr.sh $NOPROMPT -i unit
fi
if [ $? = 2 ] ; then
finish
exit
fi

Friends
This one should be routed to Cisco prime performance manager 1.6 forums
I am seeking a sample silent input format for silently installing Cisco PPM 1.6 Units by executing ./setup.sh -f <silent_input_file.txt>
Any help in this regards is greatly appreciated.
Thanks in advance
Dharmesh Shah
###### Excerpts from setup.sh ########
# Install a fresh copy of unit
InstallUnit () {
if [ "$INSTALLFILE" != "" ] ; then
./setupSvr.sh -f $INSTALLFILE -i unit
else
./setupSvr.sh $NOPROMPT -i unit
fi
if [ $? = 2 ] ; then
finish
exit
fi

Cisco Prime Server Specifications

Would anyone happen to know a good server build would be to run Cisco Prime Infrastructure for 5k in network devices. I can only find VM information and not physcial hardware specifications in regards to this.

Kindly check the following link (Data sheet for PI)
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/data_sheet_c78-729088.html
and you can check the server specification from cisco and follow cisco recommended as best practice

Cisco Prime 1.2 and image management

Does Cisco Prime 1.2 have the ability to work with image management? I was told yes but I do not see the options and I have verified I have the correct license...

Hi,
Go to Operate > Device work Center > software Image Management
check the below link:
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/user/guide/maint_images.html
Thanks-
Afroz
[Do rate the useful post]

Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture

My Cisco Prime Infrastructure ver. 1.2.1.12
Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture.
Please let me know how to access or enable the feature.
Thanks,
Tek

This is by no means a full solution, but deleting and re-adding only takes a few minutes if you use the "Export Device" and "Bulk Import" features from the Device Work Center. You can export the desired devices to a CSV file, delete them, then import from the CSV.
Of course, you might lose historical data when deleting the devices, but I'm guessing that's not as relevant since the devices themselves have been replaced by different hardware.

Cisco Prime Infra 2.1 for Wireless and Wired Management

Hi All,
I've two CPI 2.1 physical appliances running in HA mode. Currently they are used to manage Wireless infrastructure.
Now, we are planning to buy licenses and add wired devices to CPI.
We've two separate teams. Team-A manages Wireless only and Team-B manages Wired infrastructure.
Both teams want their own Admin accounts to access CPI and they don't want to use shared credentials. If Team-A logsin with their Admin Account, they should see Cisco Prime Infrastructure dashboard and if Team-B logs in with their own Admin Account, they should see CiscoWorks LMS Dashbaord.
How can we achieve this? I can create user accounts and provide access to the CPI, but I'm not sure how to specify which dahsboard they will get access to.
Thanks,
CJ

You should consider merging team doing wired & wireless, it is difficult to manage these individually.
By any chance if you deploy 3850/3650, it is both WLC & Switch, so managing by two different teams does not make sense.
HTH
Rasika

Cisco Prime Specific NTP Servers by Compliance Management

Similar Messages

Maybe you are looking for